I have been sharing my CM7/CM9/CM10/CM10.1/CM10.2-based builds for some time in several thread, which culminated in the MackayROM. I continue now with KK4.4 from where I was for JB4.3. MackayROM is based on CyanogenMod sources, with several performance enhancements.
About Cyanogen: CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.
Disclaimer: I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
If you run into errors, I may not be able to solve it!
If you know a solution to a problem, either upload it yourself to Gerrit Code Review or contact me through pm.
The ROM is based on Cyanogen sources with the following changes:
-Mackay Kernel:
-Set of cherries picked from gerrit (differing by the day)
-Some additional patches I did myself to the source code
Feature request are OK, but remember:
1. I try to stay close to stock
2. I will not include additional apps, unless they can be build from source
3. The time I spend on features depends on how much I like them myself
Although it is possible to enable ART, this is not advisable:
-Takes long to convert from Dalvik to ART on first boot
-Needs more RAM
-Can cause soft reboots
But off course, YMMV -> light users may have better luck
Changelog of 4.9.14 - 5-Nov-2014
-CM11.0 codebase of 3-Nov-2014
-TWRP updated to 2.8.1.0
Full changelog of 4.9.14 compared to stock CM11.0:
CM11.0 sources of 3-Nov-2014
Mackay kernel:
Separate kernel thread: http://forum.xda-developers.com/showthread.php?t=2532813
TWRP (2.8.1.0):
-Themed orange
-Run recovery-apps (zip files should be present in /system/mackay, launch them through advanced->run app)
Removed apps:
-VideoEditor & demo VideoFiles
vendor/cm:
-Adapt for custom MackayROM building (bootanimation, ROM&file name)
-Custom bootanimation (Thanks to Malcho)
vendor/samsung:
-Added scripts for Mackay Settings
hardware/samsung:
-F4k 720p patch for bigmem kernels
AriesParts (“Mackay Settings” in Settings menu):
Add mackay kernel settings options:
>WiFi PM mode selection
>BLX settings
>BLN activation
>Navbar selection
>Low RAM mode selection
For other projects (frameworks/base & Settings, check my github for the latest patches)
Coming from stock Samsung ROM/CM7:
-The safest way is to flash CM9 first and then flash Mackay ROM. Going directly from Samsung ROM/CM7 to Mackay ROM may lead to loosing IMEI.
Fresh install:
Can be flashed on top of any CyanogenMod build:
-Do a factory reset
-Flash ROM
-Flash gapps
-Reboot your phone
Update:
-Flash ROM
-Reboot your phone
(no wipes or other things needed, just flash & reboot)
-Custom kernels can be used only if specific for KK4.4
Credits:
-teamhacksung/pawitp for making CyanogenMod work on our ancient phone
-stratosk/DerTeufel/Mialwe for the inspiration I got from their kernels
-rootax for providing a high-speed server for high quality downloads
-Malcho for his kernel splash & bootanimation
Downloads:
Basketbuild
Google Apps
Nano Gapps
For those who want to theme it even further, Bejda made a Mackay splash screen!
http://forum.xda-developers.com/showthread.php?t=2214468
To download the same kernel, but then with voodoo colour, or with CWM:
Basketbuild
XDA:DevDB Information
[KK 4.4.4][ROM]Mackay ROM, ROM for the Samsung Galaxy S I9000
Contributors
kasper_h
ROM Kernel: Linux 3.0.x
Based On: CyanogenMod
Version Information
Status: Beta
Created 2013-11-16
Last Updated 2014-09-21
Reserved
10 seconds after posting this thread I notice something went wrong with the uploads. Please have a bit of patience, the links will be updated ASAP.
kasper_h said:
10 seconds after posting this thread I notice something went wrong with the uploads. Please have a bit of patience, the links will be updated ASAP.
Click to expand...
Click to collapse
Ok, Thansk for the rom. I will instal today. In it there is CWM or TWRP?
marcinowozniako said:
Ok, Thansk for the rom. I will instal today. In it there is CWM or TWRP?
Click to expand...
Click to collapse
Kernel is TWRP-only at the moment.
Download link on XDA fileserver has been restored. Download link on rootaxbox will take quite a bit more time, needs a full re-upload & uploadspeed is very slow ATM.
Oh.
When will Galaxy Vibrant get this, same device, but still, no 4.4 ROM
Good job
Galaxy3HELL said:
When will Galaxy Vibrant get this, same device, but still, no 4.4 ROM
Good job
Click to expand...
Click to collapse
I think this will come soon, but I won't work on that
kasper, you compiled cm11 by yourself or you got the sources from cm, because there is no cm11 build in get.cm site yet
limnaln said:
kasper, you compiled cm11 by yourself or you got the sources from cm, because there is no cm11 build in get.cm site yet
Click to expand...
Click to collapse
I always build these ROMs myself from CM sources + my own additions to CM sources, so no need for "official" CM11 builds to enable my own ROMs to be build.
kasper_h said:
I think this will come soon, but I won't work on that
Click to expand...
Click to collapse
Can I install your kernel on CM11?
marcinowozniako said:
Can I install your kernel on CM11?
Click to expand...
Click to collapse
I have no separetely flashable kernel yet...
this is awesome... was waiting for this.... one quick question though... can we use officail paranoid android gapps with this rom?
rajeshbabushrestha said:
this is awesome... was waiting for this.... one quick question though... can we use officail paranoid android gapps with this rom?
Click to expand...
Click to collapse
Yes, in principle every gapps KK4.4 package should work. However, I only tested the package which I linked in OP.
thank you for this:good:
kasper_h said:
Yes, in principle every gapps KK4.4 package should work. However, I only tested the package which I linked in OP.
Click to expand...
Click to collapse
Thanks for KK rom :good: :good:
OP's link to Gapps contains five different builds- some with ART compatibility. Is there a preferred one? ART works/tested, or better stick to delvik for a little while?
A few things I noticed:
- If I select Performance settings from Mackay app, Settings force closes.
- Orientation tile is buggy, sometimes it seems to work, sometimes not.
The ROM is very snappy, thank you very much for your work!
Kasper_h installed this rom and I have a bug. When I want to enable high-speed data connections settings crashes me the error: com.android.systemui and closing forces. Framework to overloads.
Thanks for the rom, There isnt any bug list?
Installed on CM11 and works fine.No forced closure and fast enough to be a test.
so no separate kernel 0.600
Related
FEEL FREE TO DONATE US FOR ALL WE'RE DOING FOR YOU!
For general discussions, bug reports and FAQ, write HERE!
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 2.3 (Gingerbread), which is designed to increase performance and reliability over stock Android for your device.
Code:
[SIZE="2"]#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/[/SIZE]
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
What are Nightly builds? Auto compiled builds of the latest CyanogenMod source from github. This version change each night and aren't officialy supported. If you find bugs/issues you can/must discuss here (do not submit nightlies bug on CyanogenMod issue tracker).
Also, these are unofficial; they're supported by me, not by the CyanogenMod team.
Click to expand...
Click to collapse
Download:
MoltenMotherBoard | AndroidFileHost
2nd post
Sources:
3nd post
Changelog by ME:
4nd post
Other related (please read for Custom ROMs!):
5nd post
Installation (You need to be on (at least) a Stock Gingerbread ROM 2.3.* otherwise your device won't boot):
Root your device and install ClockworkMod Recovery.
Reboot into Recovery using 3-button-combo
Do a Nandroid backup!
WIPE (wipe data/factory reset + wipe cache partition)
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally install the Google Addon
Do you want to report an issue? Do it here!
In order to do it, create a new issue, choosing correct labels corrisponding to: Device/OS which you're using, ROM/project you're on, kind of issue.
Also, please, be sure you're running the ROM/project in the exact way we've provided it to you (do not create issues if you're using different
kernel, mod, plugins and dependencies we didn't tell to use).
General Questions: MoltenMotherBoard Projects | General Questions and Info
Official Mantainer(s): ItachiSama
Downloads
A info(25/12/2012): over 3900 of my files (CM7/CWM)!
Latest: cm-7-20130722-UNOFFICIAL-gio.zip
Where: MMB page (link at 1st post)
GApps now not needed! Already included!
md5sum: 489fdba707c1028c34e498c67b904fc1 cm-7-20130722-UNOFFICIAL-gio.zip
Outdated
cm-7-20130627-UNOFFICIAL-gio.zip @ MMB page (link at 1st post)
md5sum: c3168e52a4b245a11e2bb4d0c358e55c cm-7-20130627-UNOFFICIAL-gio.zip
cm-7-20130528-UNOFFICIAL-gio.zip @ MMB page (link at 1st post)
md5sum: aa02f38621d324dcb8a203d909a791b8 cm-7-20130528-UNOFFICIAL-gio.zip
cm-7-20130303-UNOFFICIAL-gio.zip on Mediafire -> Link
md5sum: eabfba04ac30a0f46db89f2184ad2df0 cm-7-20130303-UNOFFICIAL-gio.zip (thanks ivangotoy )
-> Camera fix: camera-fix.zip on Mediafire
cm-7-20121225-UNOFFICIAL-gio.zip on Mediafire -> Link
md5sum: e196a257dd4424689c111d3a3cf47dfb cm-7-20121225-UNOFFICIAL-gio.zip
cm-7-20121212-UNOFFICIAL-gio.zip on Mediafire -> Link
md5sum: dac1b5285e7dc30e8de14ea5ada1f937 cm-7-20121212-UNOFFICIAL-gio.zip
cm-7-20121204-UNOFFICIAL-gio.zip on Mediafire -> Link
md5sum: b6bed4ea4c50d27fc9eb6aa54034f5e1 cm-7-20121204-UNOFFICIAL-gio.zip
GApps (not needed for latest version): http://goo.im/gapps/gapps-gb-20110828-signed.zip
Patch
libaudio patch done by Phiexz (for version older than 20121225): http://forum.xda-developers.com/showpost.php?p=35526589&postcount=105
Addons
Launcher2 (Android stock launcher): http://www.mediafire.com/download.php?li2kx6vc1l5miwn <- CWM-flashable :good:
Sources
My device config: https://github.com/MoltenMotherBoard/android_device_samsung_gio
Kernel sources: https://github.com/ItachiSan/kernel-gio
Cyanogen vendor (edited for Gio): https://github.com/MoltenMotherBoard/android_vendor_cyanogen
Changelog
Version: > 20130722 (so, newer than this day)
Code updates from CyanogenMod, AOSP
Just a fresh build, for giving some love to this phone
Version:20130722
Code updates from CyanogenMod, AOSP
Version:20130627
Included Gapps by default
FM works without patches
Code updates from CyanogenMod, AOSP
Version:20130528
Last CM sources
Not any major change
Version:20130318
Camera fix already included
Last CM sources
Version:20130303
Wifi problem solved
Camera fixed AT ALL
Should be the FIRST BUGFREE CM7 FOR THE GIO! For real... ;D
Version:20121225
Fixed random wifi mac address
New (old) libaudio by phiexz ;D
Should be the FIRST BUGFREE CM7 FOR THE GIO! Yuppie!
Version:20121212
Disabled smoothass governor
Working compache!
Fixed version number
Disabled zCache (conflicts with zRam/compcache)
TUN as module now (must be loaded manually, sorry, will fix soon )
Version: 20121204
Using 2.6.35.14 kernel (squadzone sources with added compcache, thanks to erikcas) compiled with no-linaro compiler (wasn't booting, sorry )
TUN and CIFS inside kernel, no modules
zRam module (need testing)
Modded Mms.apk -> no emoji button -> replaced with newline button
Camera works fine -> no pictures rotated :good:
Tethering works fine :good:
Source clean and updated
Stable, everything works (bugs? see up how-to and write me ;D)
How you can make me the most happy man in the world AKA Others
Test this ROM; I hope you'll apreciate it.
If you want to use it as base for Custom ROMs, PM me!
Thanks:
For kernel:
squadzone
phiexz
erikcas
For device config:
phiexz
marcin1147
And for patience and testing:
OldDroid
Also me, if you find good my work.
Take a look at my other works! :fingers-crossed:
Share it, without mirrors! Link to this thread.
Look post below.
Some polls
Do you prefer newline button or emoticons one in messaging app? -> Yup -> Will be this ;D
Want this to be official? -> Yes, you want!
Will you consider this good as a base for custom ROMs? -> Many send me pms to use it as base, so... ;D
great. will try..
camera and FM fixed?
thanks for new rom
p/s: sorry for 1 star, it's a my bug
millionsun93 said:
thanks for new rom
p/s: sorry for 1 star, it's a my bug
Click to expand...
Click to collapse
rated 5 to compensate it.
voetbalremco said:
camera and FM fixed?
Click to expand...
Click to collapse
Camera is in changelog.
FM works fine for me; just, Bluetooth must be enabled (if not, FM will set up by itself) and edit preferences to match your country.
Like, I had to set Europe as world zone.
ItachiSama said:
FM works fine for me; just, Bluetooth must be enabled (if not, FM will set up by itself) and edit preferences to match your country.
Like, I had to set Europe as world zone.
Click to expand...
Click to collapse
nice.
already knowledge to upload device config somewhere for cyanogenmod ?
I've upped my files to my Github... After user reviews, if they find this good, will contact CM team, asking them how-to add Gio in CM.
ItachiSama said:
I've upped my files to my Github... After user reviews, if they find this good, will contact CM team, asking them how-to add Gio in CM.
Click to expand...
Click to collapse
great. hopefully.
Wow thanks man
i'm downloading now
it's important for gio user because we need bug free and update CM7
it's bug free?
ItachiSama could u please tell which launcher it has
Sent from my GT-S5660 using xda app-developers app
batman38102 said:
ItachiSama could u please tell which launcher it has
Sent from my GT-S5660 using xda app-developers app
Click to expand...
Click to collapse
ADW I think.?
Man why they use ADW launcher cuz i want stock like launcher
Sent from my GT-S5660 using xda app-developers app
batman38102 said:
Man why they use ADW launcher cuz i want stock like launcher
Sent from my GT-S5660 using xda app-developers app
Click to expand...
Click to collapse
stock like is not looking like AOSP, wich cyanogenmod actually is.
its meant to be 100% exact as cm7, so no other launchers or so added.
batman38102 said:
Man why they use ADW launcher cuz i want stock like launcher
Sent from my GT-S5660 using xda app-developers app
Click to expand...
Click to collapse
Ahw Gawd, noobs incoming.
In fact, anyone is a noob on xda...
Will compile at home and share in the evening.
Sent from my GT-5660 using xda app-developers app
Why choose for CarbonRom?
CarbonRom is an AOSP based rom. It also gives you a great option of customization. Reasons to go for CarbonRom are:
- AOSP based, s no bloatware or other stuff
- Great Customization options
- Nice look
- HALO
- ...
Current Version
CarbonRom 2.0 is still in early stages, it's Android 4.3, but not all features are implemented!
I won't manually search for all new features, just wait for an official 2.0 changelog when it is completed.
- Android 4.3
- HALO
- DSP Manager
- New battery icons
- stability and speed enhancements
- a million other little things as well - we basically don't even sleep anymore.
What is CarbonRom?
CarbonRom is an aftermarket firmware based on the Android Open Source Project. We are dedicated to fast, stable, and feature-filled roms, honesty and communication with our users, and openness with our code. We like frequent builds, with the very latest and greatest hardware support and fixes. We strive to not only provide you with the best rom we can build, but also to give back to the Android community and our fellow developers. For us, this is about creating something we can be proud of and hope you will enjoy.
Please feel free to look at, build, and use our code on CarbonDev GitHub.
We would like to thank CyanogenMod for their device trees, framework/settings mods and their code that was incorporated into this project. We also extend our gratitude to the devs whose code that we have incorporated. Proper authorship has been maintained and can be viewed on our repository.
Special thanks also go to Slim Rom for some of their features, PA, AOKP, @FXP, and anyone else we may have borrowed commits from that hasn't been mentioned here. If you feel you have been unfairly left out, please - let us know.
While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device, family, pets, or perception of reality. We ask that you do your part to know your device and know how to recover from problems before you flash! If you have questions, ask your fellow users or ask us in #teamcarbon on freenode IRC.
Screenshots
Download Carbon
All Carbon downloads and further information such as features, changelog, and FAQ can be found here in the second post of this thread.
I'll continue building nightlies daily in the week, and sometimes also in the weekends. I'll post the download links here, but I'll also try to make some sort of easier way in the future when my rom is stable and I'll be officially part of the Team Carbon maintainers.
Support
1) Search. Search, search, search. Yes, you. I don't care how unique or important your question is, it's very likely someone has adressed it already. Especially if you're even close to new at this.
2) Read our FAQ, which can be found on our goo.im page linked above. It's new, but expanding fast. Just like us!
3) Ask a question here. Someone will no doubt try to help you. Warning: this help may come in the form of telling you it's a dumb question that has been asked before. See step 1 - such are the perils of asking questions when you haven't done the research yourself. Android is about helping yourself.
Who is the Carbon maintainer for your device?
For you guys, Xperia developer is me only, Krabappel2548. I'm the only one working for Xperia devices, maybe I'll add more devices to my support list soon. Any donations are highly appreciated, I'll always use them for my development, to buy new devices
Who are the Team Carbon members?
andros11
BigShotRob
dg4prez
Kejar31
mattmanwrx
morfic
nocoast
pixeldotz
slick_rick
winner00
Thanks to your help we now have the machines we need for nightlies. We couldn't have done it without you! Remember, every penny you send to us goes right back into the rom. It's used for hardware, server costs, etc - all the things that help us make Carbon better with every release. Your support means the world to us! If you've enjoyed Carbon, please consider a donation toward this goal. Thank you, and we hope you continue to enjoy Carbon!
FAQ
Android 4.3.1 Downloads
- Carbon downloads: Carbon downloads
Gapps: http://bit.ly/16bWztn
Installation instructions
Clean install
- Wipe data, cache dalvik cache
- Install CarbonRom
- Install gapps!
- Reboot device & enjoy!
Update:
- Wipe cache, dalvik cache
- Install CarbonRom
- Reflash gapps
- Reboot device & enjoy!
Working
- Everything that's not in the "bugs list"
BUGS?
- Maybe more, let me know
To Do List
- Readd all tweaks in the kernel
- Compile with linaro and -O3
- Maybe even more CPU Governors
- Maybe even more I/O Schedulars
- tell me!
Xperia ZL changelog
The newer changelog can be found here: Carbon Rom
Code:
[QUOTE][B]== 11/10 Nightly ==[/B]
Updated the kernel:
- Back to CM kernel
Updated the rom:
- PA PIE
- Android 4.3.1
- A lot of minor fixes
- Latest CM, Carbon etc changes[/QUOTE]
[B]== 16/09 Nightly ==[/B]
Updated the kernel:
- Meow kernel
Updated the rom:
- A lot of things, too much too sum up
- Latest CM, Carbon etc changes
[B]== 13/09 Nightly (yuga, odin) ==[/B]
Updated the kernel:
- Nothing major
Updated the rom:
- A lot of things
- Latest CM, Carbon etc changes
[B]== 06/09 Nightly (yuga, odin, pollux, pollux_windy) ==[/B]
Updated the kernel:
- Nothing major
Updated the rom:
- Initial Android 4.3 release for ZL, and Tablet Z
- Dropped multi-user support
- Back to phone interface
- Fixed bluetoot toggle
- settings got some updates
- A lot of other things
- Latest CM, Carbon etc changes
[B]== 25/08 Nightly (yuga) ==[/B]
Updated the kernel:
- Added Wheatley and the great Intellidemand CPU Governor
- Added Simpele kgsl GPU governor
- CPU undervolting + min freq 192MHz
- Added USB Fastcharge
- Added SIO & ROW I/O schedular
- Added build optimizations for Linaro
Updated the rom:
- Android 4.3-r2.2
- Multi-User support
- Fixed wifi issues with newer kernel
- fixed some issues from previous release
- Latest CM, Carbon etc changes
[B]== 21/08 Nightly (yuga) ==[/B]
Updated the kernel:
- No changes
Updated the rom:
- A lot of things are updated and/or fixed!
- Speed improvements
- HALO is added
- App privacy is added
- A lot more things I can't remember :p
- Latest CM, Carbon etc changes
[B]== 09/08 Nightly (odin and yuga) ==[/B]
Updated the kernel:
- Updated to Android 4.3
- No more kernel tweaks untill they are readded in new kernel
- Latest CM, Carbon etc changes
Updated the rom:
- Updated to Android 4.3
- All my tweaks are included
- Latest CM, Carbon etc changes
Source?
Github device config files: All sources can be found here
Last reserved one for now
Need unlocked bootloader?
EDIT: YES need.
rioferraz said:
Need unlocked bootloader?
EDIT: YES need.
Click to expand...
Click to collapse
All roms built from source need unlocked bootloader that's why there is original development section
Sent from my C6603 using xda app-developers app
No one tested this rom?
Sent from my C6603 using xda app-developers app
Finally!!. Good Job Releasing
Downloading!!!
Thanks a lot for the time released on ZL!!
I'll flash and feedback!!
Thank you!!
I had an issue where I couldn't access /cache, /system or /sdcard while in recovery, works fine in baked bean.
I love the bootloader image though, looks great.
I like the gesture lockscreen and the overall feel of the rom seems to be pretty cool.
statusbar and navbar are transparent?
Downloading and testing...
thanx a lot, dude!
---------- Post added 13th July 2013 at 12:28 AM ---------- Previous post was 12th July 2013 at 11:28 PM ----------
Best ROM I've used to date! Great work
The camera button is not working.
TheTofu said:
I had an issue where I couldn't access /cache, /system or /sdcard while in recovery, works fine in baked bean.
I love the bootloader image though, looks great.
I like the gesture lockscreen and the overall feel of the rom seems to be pretty cool.
Click to expand...
Click to collapse
Ok, so also recovery issues on ZL. I'll try to fix them asap
rioferraz said:
statusbar and navbar are transparent?
Click to expand...
Click to collapse
You can choose transparency in settings => carbon
insanexd said:
The camera button is not working.
Click to expand...
Click to collapse
Ok, is ot working on CM? Because I used Cm device tree
Sent from my C6603 using xda app-developers app
Nice dev. Thanks for this rom. Will download and report later
Morning Guys,
after a day using the ROM so far, very fast and stable.
The issues I had are the same reported, on CWM I can't wipe cache, some times the PIE did not show (mine is configured to hide), but the stock nav shows and you are always covered, so not really a problem, the camera button works, but not all the time, and when you take a pic with flash it take some secs to process.
I was using the Free xperia project ROM before, I guess the camera botton was working, not sure, but the flash problem wans't happening.
Please if possible, someone, test the camera using flash, just to be sure that is not my phone problem.
Thaks a lot for the ROM, I'm enjoying pretty much, the Carbon settings are really easy to use.
The ROM is amazing.
Thanks.
What about kernel? Do I need to flash kernel from ROM zip first(if I`m coming from Sony`s stock)?
Not any word about this step in FAQ...
rtimoff said:
What about kernel? Do I need to flash kernel from ROM zip first(if I`m coming from Sony`s stock)?
Not any word about this step in FAQ...
Click to expand...
Click to collapse
Yes, flash any kernel with recovery before installing the rom and be sure to have unlocked bootloader
Sent from my C6603 using xda app-developers app
thanks. i think this is great rom.
and i also wait ka02 ROM
Sent from my C6506 using xda app-developers app
I'm going to release a new ROM tomorrow
And an update of carbon the day after
Sent from my C6603 using xda app-developers app
honami rom?
Sent from my C6506 using xda app-developers app
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 KitKat, which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* [COLOR="Red"]Your warranty is now void.[/COLOR]
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
What are this builds? Auto compiled by me with the latest CyanogenMod source from github. This version change each night and aren't officialy supported. If you find bugs/issues you can/must discuss here (do not submit nightlies bug on CyanogenMod issue tracker).
Downloads:
Rom:
CyanogenMod 11 maguro 03122013
Kernels:
All this kernels are compatible with CM and probably all the other modded roms
ParanoidAndroid Kernel (aospa)
Lean Kernel (slim)
Stock Cyanogenmod Kernel (cm)
KitKat GAPPS
TeamWin Recovery v2.6.3.1
Changelog: http://review.cyanogenmod.org/#/q/status:merged+branch:cm-11.0,n,z
Installation
- First time flashing CM11.0 to your maguro (or coming from another ROM)?
Root your device and install TeamWin Recovery. (Download Version 2.6.3.1)
Reboot into Recovery
Do a Nandroid backup!
WIPE (wipe data/factory reset + wipe cache partition)
Install the ROM from internal sdcard using TeamWin Recovery
Optionally install different kernel
Optionally install the Google Apps
Reporting Bugs
You are allowed to report bugs only in this thread. Before reporting a bug, please make sure you are running as stock as possible. This means no custom kernel, no custom framework modification, etc. If you are using any of the above modifications, please flash the rom again to get rid of the modifications before reporting.
Suggestions:
If you have any kernel you would like to see here leave a reply or send me a message, maybe i can work that for you
If you think this was useful click THANKS
What is the best Kernel? And thanks for this rom
Sent from my Galaxy Nexus using xda app-developers app
Boytrix said:
What is the best Kernel? And thanks for this rom
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
After some tests i fell this about them:
AOSPA: Since franciscofranco is involved its the most modded and probably the one with more updates and tweaks, has OC and others tuff.
SLIM: This one is from SlimRom and is almost leankernel, so its a lightweight kernel improved for performance and battery saving
CM: Almost a pure kernel.
For me i usually use SLIM
all 3 kernels goes to same link i guess
desirat said:
all 3 kernels goes to same link i guess
Click to expand...
Click to collapse
Sry copy/paste problem, fixed now. Thanks for you attention
rtfpessoa said:
After some tests i fell this about them:
AOSPA: Since franciscofranco is involved its the most modded and probably the one with more updates and tweaks, has OC and others tuff.
SLIM: This one is from SlimRom and is almost leankernel, so its a lightweight kernel improved for performance and battery saving
CM: Almost a pure kernel.
For me i usually use SLIM
Click to expand...
Click to collapse
What is the version of the pure CM kernel? Is it updated to 3.0.101?
Is this some new ROM or the ROM dhacker posted on Twitter?
Sent from my Galaxy Nexus using Tapatalk
RajatPatel said:
What is the version of the pure CM kernel? Is it updated to 3.0.101?
Click to expand...
Click to collapse
I built the CM kernel this afternoon at Nov 17 2013 15:17:35 (GMT).
The CM pure kernel is the one that begins with "cm".
AbhishekS said:
Is this some new ROM or the ROM dhacker posted on Twitter?
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
This is pure CM 11 from github built by me this afternoon. +- at 15h GMT
rtfpessoa said:
I built the CM kernel this afternoon at Nov 17 2013 15:17:35 (GMT).
The CM pure kernel is the one that begins with "cm".
Click to expand...
Click to collapse
You got me wrong I think. I was asking about which linux version is this CM kernel based upon?
RajatPatel said:
You got me wrong I think. I was asking about which linux version is this CM kernel based upon?
Click to expand...
Click to collapse
As it says in here: https://github.com/CyanogenMod/android_kernel_samsung_tuna/blob/cm-11.0/Makefile
Its 3.0.101.
Are any customization options present in this ROM? E.g Quick Settings, Volume Wake, Status Bar Mods etc. Or is it like stock AOSP like for now?
RajatPatel said:
Are any customization options present in this ROM? E.g Quick Settings, Volume Wake, Status Bar Mods etc. Or is it like stock AOSP like for now?
Click to expand...
Click to collapse
Since this is pure CM11 and its in its first stages, just some device specific tweaks like color. Other teaks like advanced reboot. And other minor stuff. The rest is still stock.
I think stock. I'm just assuming. Haven't flashed yet.
Sent from my Galaxy Nexus using Tapatalk
rtfpessoa said:
Since this is pure CM11 and its in its first stages, just some device specific tweaks like color. Other teaks like advanced reboot. And other minor stuff. The rest is still stock.
Click to expand...
Click to collapse
Will definitely try this :good:
And what about graphic glitches?..
Erofich said:
And what about graphic glitches?..
Click to expand...
Click to collapse
Some glitches with the browser mainly. And sometimes with rotation. If you use chrome its has no problems.
@rtfpessoa, are you supporting all 3 kernels? Or just CM stock kernel?
beekay201 said:
@rtfpessoa, are you supporting all 3 kernels? Or just CM stock kernel?
Click to expand...
Click to collapse
What do you mean by supporting?
I just compiled them so anybody could use the one they like the most.
I will probably be compilling them regularly if there are sufficient people interested.
rtfpessoa said:
What do you mean by supporting?
I just compiled them so anybody could use the one they like the most.
I will probably be compilling them regularly if there are sufficient people interested.
Click to expand...
Click to collapse
Well, from your OP, I thought that you're a CM dev. I thought it was weird/confusing you're even building other custom kernels and making reference to them, and then it states that for a bug report, a user must be running CM stock kernel.
LiquidSmooth & Euphoria-OSAll builds are unofficial
GEE users flashing my non-GPROJ ROMs, flash one of the GEE kernels below in the downloads section, after flashing the ROM.
DISCLAMER
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed.
Please do some research if you have any concerns about features included in this ROM before flashing it!
YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Code:
ABOUT THE ROMS
LIQUIDSMOOTH
LiquidSmooth is an aftermarket firmware based on the Android Open Source Project.
Dedicated to providing users with smooth, stable and fast ROMs. A Lightweight modified AOSP base, and then add the features you crave!
While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device.
We ask that you do your part to know your device and know how to recover from problems before you flash!
Click to expand...
Click to collapse
Code:
SOURCE CODE
GPROJ BASED
ROM: https://github.com/LiquidSmooth
KERNEL: https://github.com/CyanogenMod/lge-kernel-gproj
DEVICE: https://github.com/CyanogenMod/android_device_lge_ls970
VENDOR: https://github.com/TheMuppets/proprietary_vendor_lge
DEVICE COMMON: https://github.com/CyanogenMod/android_device_lge_gproj-common
DEVICE COMMON: https://github.com/CyanogenMod/android_device_lge_ls970-common
Click to expand...
Click to collapse
Code:
DOWNLOADS
LIQUIDSMOOTH ROM
LiquidSmooth - Android 5.0.2 - 02/04/15 - AndroidFileHost
LiquidSmooth - Android 5.0.2 - 03/17/15 - AndroidFileHost (GPROJ)
LIQUIDSMOOTH V4.0 (Android 5.0.*)
LiquidSmooth 01/18/15 - AndroidFileHost (GPROJ)
LiquidSmooth 01/29/15 - AndroidFileHost (GPROJ)
EUPHORIA-OS ROM
Euphoria-OS - Android 5.1.1 - 06/10/15 - AndroidFileHost
EUPHORIA-OS ROM V1.1 (Android 5.1.*)
Euphoria-OS 05/18/15 - AndroidFileHost (GPROJ)
GAPPS
Nano Modular Pachage - Android 5.1.*
KERNELS
Here are some other kernels for Gee and Geeb. If you get flashing colors try the other kernel of the same name.
I didn't make these kernels, I found them on other threads for this device. Threads are listed below.
GEE-MAKO
KERNELS - Android 5.1.*
Solid Kernel V1.82
Franco r217.5
Hells-Core b75-L
KERNELS - Android 5.0.*
Solid Kernel V1.61
Jolla AIO Gen2-v2.5 (GUI Aroma Installer - Mod and Non-Mod) [Instructions]
Franco r216
Hells-Core b69
Hells-Doctor FrAndroid 0224
Hells-Doctor Numeriks 0403
Mirage 020515
KERNELS - Android 4.4.*
Solid Kernel V1.5
AK-CM 360
AK-AOSP 360 (Works with this build)
Franco r212
Franco-MOD r212 (Works with this build)
Matr1x V14.2
Matr1x-MOD V14.2(Works with this build)
Jolla AIO Gen2-v1.2 (GUI Aroma Installer - Mod and Non-Mod) [Instructions]
GPROJ
KERNELS - Android 5.1.*
Solid Kernel V1.8.2 (GEE)
Jolla AIO Gen3-v1.2 (GEE)
KERNELS - Android 5.0.*
Solid Kernel V1.61 (GEE)
KERNELS - Android 4.4.*
Solid Kernel V1.5 (GEE)
STOCK
KERNELS - Android 5.0.*
AK 600 (GEE)
Matr1x (GEE)
KERNELS - Android 4.4.*
Solid Kernel V1.82 (GEE)
RECOVERY
TWRP 2.8.6.0
FIXES
SuperSU
Click to expand...
Click to collapse
INSTALLATION
Wipe Data, System, Cache, Dalvik Cache
Flash LiquidSmooth ROM
Flash GApps
Reboot
UPDATING
Nand Backup Using Recovery
Erase Previous Backup (Saves Space)
Flash LiquidSmooth ROM Update
Wipe: Cache, Dalvik
Reboot
Click to expand...
Click to collapse
Code:
THREADS MENTIONED
Gapps 5.0.*
SuperSU
Jolla Kernel
Solid Kernel
Matr1x Kernel
Franco Kernel
TWRP recovery
ViPER4Android Audio Effects
XDA:DevDB Information
LiquidSmooth, ROM for the Sprint LG Optimus G
Contributors
clementinox
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
Version Information
Status: Alpha
Created 2015-01-26
Last Updated 2015-06-14
Reserved
Reserved
I currently do not own this device but will try my best to fix what I can.
Flash and enjoy!
clementinox said:
I currently do not own this device but will try my best to fix what I can.
Flash and enjoy!
Click to expand...
Click to collapse
So you haven't (let it) tested at all?
Kevinjoa said:
So you haven't (let it) tested at all?
Click to expand...
Click to collapse
I have had one person test it. He said all functions of the phone seem to be working except maybe the carrier name was wrong, it said Sprint instead of his carrier where he lives.
Kevinjoa said:
So you haven't (let it) tested at all?
Click to expand...
Click to collapse
clementinox said:
I have had one person test it. He said all functions of the phone seem to be working except maybe the carrier name was wrong, it said Sprint instead of his carrier where he lives.
Click to expand...
Click to collapse
I can't get either of you guys' liquid builds to boot. It keeps looping at the "LIQUIDSMOOTH" With the symbol below the words. It gets past the water pouring, but keeps looping at the second part. I just let it sit for 10 minutes and nothing changed. I didn't flash anything extra, rom only. They both do the same thing. I don't mean to cross threads here since Kevin built one as well. But I figured I would mention it here since you both posted.
Any suggestions either of you?
dopy25 said:
I can't get either of you guys' liquid builds to boot. It keeps looping at the "LIQUIDSMOOTH" With the symbol below the words. It gets past the water pouring, but keeps looping at the second part. I just let it sit for 10 minutes and nothing changed. I didn't flash anything extra, rom only. They both do the same thing. I don't mean to cross threads here since Kevin built one as well. But I figured I would mention it here since you both posted.
Any suggestions either of you?
Click to expand...
Click to collapse
Is this on a clean install? As In TWRP wipe data, dalvik cache, cache and system. DO NOT WIPE INTERNAL STORAGE. Then flash the rom.
I have had one person already test it out and his is using it currently on LS970, boots just fine. You could also try wiping cache and dalvik cache if it loops.
Considering its on both roms Its probably not rom related.
What device do you have exactly?
clementinox said:
Is this on a clean install? As In TWRP wipe data, dalvik cache, cache and system. DO NOT WIPE INTERNAL STORAGE. Then flash the rom.
I have had one person already test it out and his is using it currently on LS970, boots just fine. You could also try wiping cache and dalvik cache if it loops.
Considering its on both roms Its probably not rom related.
What device do you have exactly?
Click to expand...
Click to collapse
I apologize for not being more specific.
1) yes it was an install on a clean partition. I use multiRom and installed it as a secondary rom, which is basically like installing the rom on a virtually clean partition. I have been doing this for awhile and only ran into a few issue. One being stock based roms as secondary. The other issues I have had are ROM or recovery based.
2) I am using an LS970 LG Optimus G from Sprint.
3) the roms I tried and am mentioning here are both LiquidSmooth so it very possibly could be rom (sources) based. I have no issues with Kevins device sources, the same with gproj sources, which I believe you used for the LS970.
I will try to install it again and wipe data, and caches before booting. That may help.
dopy25 said:
I apologize for not being more specific.
1) yes it was an install on a clean partition. I use multiRom and installed it as a secondary rom, which is basically like installing the rom on a virtually clean partition. I have been doing this for awhile and only ran into a few issue. One being stock based roms as secondary. The other issues I have had are ROM or recovery based.
2) I am using an LS970 LG Optimus G from Sprint.
3) the roms I tried and am mentioning here are both LiquidSmooth so it very possibly could be rom (sources) based. I have no issues with Kevins device sources, the same with gproj sources, which I believe you used for the LS970.
I will try to install it again and wipe data, and caches before booting. That may help.
Click to expand...
Click to collapse
Hi there!
I was the one that actually tested the previous build for clementino and I am using it as a daily driver. I used the previous build and am downloading this new build as I type this reply. From what I had read around, using the lollipop build as a secondary doesn't always work.
first boot of LS 4.0 after clean install could take up to 10 - 15 minutes so I would suggest to wait that long as well. I use the Sprint LG Optimus G LS970 as well but I bought it in Indonesia as an unlocked phone and it already has another service provider on it with working data plan. This causes some problems for me at times when changing ROMs because it would sometimes cause me to lose data. Never the less the build is solid.
I assume this new build eliminates the CM theme engine and added RRO. Overall, I'm just excited about this new build.
shindou01 said:
Hi there!
I was the one that actually tested the previous build for clementino and I am using it as a daily driver. I used the previous build and am downloading this new build as I type this reply. From what I had read around, using the lollipop build as a secondary doesn't always work.
first boot of LS 4.0 after clean install could take up to 10 - 15 minutes so I would suggest to wait that long as well. I use the Sprint LG Optimus G LS970 as well but I bought it in Indonesia as an unlocked phone and it already has another service provider on it with working data plan. This causes some problems for me at times when changing ROMs because it would sometimes cause me to lose data. Never the less the build is solid.
I assume this new build eliminates the CM theme engine and added RRO. Overall, I'm just excited about this new build.
Click to expand...
Click to collapse
I have CM12 for LS970 installed as secondary. With the updated TWRP there are no issues on installing Lollipop as primary or secondary. I am not trying to bash. I am trying to install Liquid smooth. I had Kevins Liquid Trex and it was awesome, but now there are newer versions and updates and fixes. Every other LP rom has installed fine. The only other thing I will try is to install as primary. If it works, I can backup, then restore it as secondary.
Also, what do you mean updated? Have you not tried the 01-18 build that is linked in the OP?
dopy25 said:
I have CM12 for LS970 installed as secondary. With the updated TWRP there are no issues on installing Lollipop as primary or secondary. I am not trying to bash. I am trying to install Liquid smooth. I had Kevins Liquid Trex and it was awesome, but now there are newer versions and updates and fixes. Every other LP rom has installed fine. The only other thing I will try is to install as primary. If it works, I can backup, then restore it as secondary.
Also, what do you mean updated? Have you not tried the 01-18 build that is linked in the OP?
Click to expand...
Click to collapse
I'm sorry dopy25, I thought that clementinox has uploaded another build since he already uploaded the new builds he had for geeb. I didn't realize it until the download was completed. The 01-18 build is the one I'm running. But I think he's prepared another build. The only issue I encountered with this build, aside from the mentioned wrong carrier name is that in the lock screen it would show (no sim - Sprint) at the top left corner. Although text and calls work, my data doesn't and I assume it has something to do with my phone not on Sprint (APNs etc).
@dopy25
You need do update multirom TWRP once again, there was fixes for some ROMs which us block based zips, my liquid is working as secondary now and his should also.
Kevinjoa said:
@dopy25
You need do update multirom TWRP once again, there was fixes for some ROMs which us block based zips, my liquid is working as secondary now and his should also.
Click to expand...
Click to collapse
You are absolutely right. After the update I grabbed from your server, I was able to install both Liquid roms as secondary. However, neither have the developer options available. Is there a different way to activate them in Liquid?
Also, @clementinox I have pretty much everything working in your ROM, but it caused my boot loader to freeze at the google loading screen. That was on reboot. It just sat there. So I had to go in recovery and wipe stuff again. So, to everyone else wanting to try this with gproj sources. It does indeed work.
Finally another Lollipop ROM!
Downloading now, if something goes wrong I'll report, thanks! :good:
Download link sends me to 01/18 is that the last build?
FcoEnrique said:
Finally another Lollipop ROM!
Downloading now, if something goes wrong I'll report, thanks! :good:
Download link sends me to 01/18 is that the last build?
Click to expand...
Click to collapse
Yes its the last build, I will be uploading a new version today, haven't had time to build one before now.
clementinox said:
Yes its the last build, I will be uploading a new version today, haven't had time to build one before now.
Click to expand...
Click to collapse
Whoohoo... I knew it... backing up data and preparing to clean flash another build by @clementinox .
LiquidSmooth V4.0 GPROJ ROM Updated!
Announcements
Flash and enjoy! If you like the ROM give a thumbs up!
Changelogs
LiquidSmooth Gerrit
LiquidSmooth Github
As Expected, downloaded and will try out your newest build.
Have you found the cause of the No Sim Card sign on the lockscreen or is it still there? Hopefully with this new update I can set the APN to my carrier's and get working data again! Thanks clementinox! :fingers-crossed:
I love the extra features against other ROMs (like cyanogem) but... I really miss themes, which was a "hell no!" when I found that it is not present in the ROM... And editable QS... So I'll in the meantime...
I Hope to see a build with all that in the future :good:
OmniROM - Lollipop Android 5.1.1 - for Samsung Galaxysmtd
What is Omnirom?
A new Android custom rom has been announced at the BABBQ (Big Android BBQ) by @XpLoDWilD, @Chainfire, @Dees_Troy & Team. For more information go to omnirom's website
Code:
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
* If you dont like this rom, Stay away from this thread!
This Rom is build with Omnirom source without changes except:
- The bigmem switch included in setting, advanced, big thanks to @xc-racer99
- The kernel, big thanks to @me
This Rom is compiled with A8-optimized UBERTC built by myself: https://bitbucket.org/Coldwindofnowhere/.
GCC 4.9 is used for the rom and GCC 4.9 for the kernel.
WHAT IS NOT WORKING?
same bug as Unofficial build from Humberos.
How To Flash:
Download the Rom for your device and copy to your phone
Reboot into Recovery
Wipe Data Factory Reset
flash Rom
flash 5.1.x GApps
Special Thanks :
the omnirom team.
@humberos, without him this rom wouldn't be possible.
@Cl3Kener for his toolchain.
@xc-racer99 for his contribution.
Download Link :
https://mega.nz/#F!T9IGFaaS!ZkbGR7Ouj9UtbS2b8gLR7w
Mirror: https://www.mediafire.com/folder/i6z3s4qhwxmyk/Omni
LATEST version : https://www.androidfilehost.com/?fid=24499762635999744
Contributors
@Coldwindofnowhere
Source Code: https://github.com/omnirom
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.0.x
Based On: AOSP
Version Information
Status: Testing
Created 2015-09-08
Last Updated 2016-04-14
>If you like my work, hitting the thanks button won't hurt you<
Changelog:
11/11/2015
- Optimized ART parameters optimizing apps will takes more time and apps will be bigger but performance will be way better. If you really don't like it because /data/ is too full, i will remove it in next builds.
- Built using A8-optimized UBERTC toolchain
- Fully built with -O3 -fgraphite -fgraphite-identity
23/11/2015
- Latest Omni sources
- Smoother
- Audio problems related to -O3 fixed
25/11/2015
- Tweaked ART a bit
- 720p patched video libraries
(use my latest kernel to get Youtube working even with Maxmem)
31/12/2015
- Latest Omni sources
- Some build.prop tweaks (dracov76)
- Built using latest UBERTC 4.9 & 5.3
- ART tweaked again to have more space in /data
- efs backup support in TWRP (xc-racer99)
Screenshots:
See the attachements
I'll try asap
Many thanks man !
coldwindofnowhere you made me come back to lollipop by updating this great rom . the rom is fast and smooth no bug so far too bad i cant use your kernel keep up the good work.
Thanks for updating the omni. Is this rom include your latest kernal?
@Coldwindofnowhere Can you build your ROM for Samsung Galaxy S Vibrant, same hardwere. Thank you for your hard working :thumbup::thumbup:
althafvly said:
Thanks for updating the omni. Is this rom include your latest kernal?
Click to expand...
Click to collapse
Yes it includes the latest version of the kernel
Thanhtho96 said:
@Coldwindofnowhere Can you build your ROM for Samsung Galaxy S Vibrant, same hardwere. Thank you for your hard working :thumbup::thumbup:
Click to expand...
Click to collapse
Well i will try but i'm not sure if it will work. Since i don't own a vibrant, it might not even boot
Coldwindofnowhere said:
Well i will try but i'm not sure if it will work. Since i don't own a vibrant, it might not even boot
Click to expand...
Click to collapse
I will be tester, if you done send it to me I can test
Thanhtho96 said:
I will be tester, if you done send it to me I can test
Click to expand...
Click to collapse
Building right now, i will PM you in a few hours when the build is finished
Coldwindofnowhere said:
Building right now, i will PM you in a few hours when the build is finished
Click to expand...
Click to collapse
Ok thank you
Ohh new roms. can we get some screenshot please thank you.
awesome thanks.. my device never felt snappier than before....
ofcourse.. i don't use gapps and froze all telephony stuffs.. using it like a tablet lol...
Rom is very fast & stable. Can we expect Marshmallow?
Alokhacker said:
Rom is very fast & stable. Can we expect Marshmallow?
Click to expand...
Click to collapse
Technically it's possible but not before a long time. (Almost) All the devs have abandoned the support of the i9000
Coldwindofnowhere said:
Technically it's possible but not before a long time. (Almost) All the devs have abandoned the support of the i9000
Click to expand...
Click to collapse
Still there are about 4 in the devs
Alokhacker said:
Rom is very fast & stable. Can we expect Marshmallow?
Click to expand...
Click to collapse
One of the biggest issues we're going to run into to get Marshmallow on the i9000 and related phones is the fact that Google has retired yaffs2 from the build system. I think I have fixed that issue but the build in Omni is broken elsewhere for all devices so I can't test it.
xc-racer99 said:
One of the biggest issues we're going to run into to get Marshmallow on the i9000 and related phones is the fact that Google has retired yaffs2 from the build system. I think I have fixed that issue but the build in Omni is broken elsewhere for all devices so I can't test it.
Click to expand...
Click to collapse
Hope Omni will fix it. That would be great so see Marshmallow on our old i9000.
Trainer_H said:
Hope Omni will fix it. That would be great so see Marshmallow on our old i9000.
Click to expand...
Click to collapse
+1
Thanks to @Coldwindofnowhere for new version of the Rom. It is very fast and stable. I do not use Gapps.