[RECOVERY][H60] ClockworkMod Recovery for Honor 6 - Honor 6, 6 Plus Original Android Development

HOW TO INSTALL CWM?
Unlock your bootloader else flashing via fastboot will be impossible
Upgrade your phone to the latest available stock rom (to get latest bootloader and baseband firmware)
Download ClockworkMod Recovery for your specific variant
Reboot into your bootloader (Variant 1: adb reboot bootloader, Variant 2: Disconnect USB-Cable, Power phone down, hold Vol- and replug the USB-Cable)
Flash ClockworkMod Recovery via fastboot. (fastboot flash recovery cwm-6.0.5.1_2015XXXX_h60_lXX.img)
Reboot (fastboot reboot)
WHERE TO GET CWM?
For Lollipop (Android 5.1, EMUI >= 3.1) based ROMs:
H60-L02 + H60-L03 + H60-L11 + H60-L12 + H60-L21: not available yet
H60-L01 + H60-L04: cwm-6.0.5.1_20150926_h60_l04_lollipop.img
For Kitkat (Android 4.4, EMUI <= 3.0) based ROMs:
H60-L02 + H60-L03 + H60-L11 + H60-L12 + H60-L21: cwm-6.0.5.1_20150321_h60_l02.img - 9.43 MB
H60-L01 + H60-L04: cwm-6.0.5.1_20150321_h60_l04.img - 9.43 MB
HOW TO USE CWM?
- First variant: Power off phone, then hold Volume+ and Power Buttons at same time till Honor logo appears
- Second variant: adb reboot recovery

Thanks. Good work. Any chance of increasing the font size?

theoneofgod said:
Thanks. Good work. Any chance of increasing the font size?
Click to expand...
Click to collapse
Just for you: cwm-6.0.5.1_20150321_h60_l04.img - 9.43 MB

codeworkx said:
Just for you: cwm-6.0.5.1_20150321_h60_l04.img - 9.43 MB
Click to expand...
Click to collapse
I can't boot into cm recovery with volume - and power button bot I can boot it with quickboot. This will work for flashing cyanogenmod.

harshwardhan ghundare said:
I can't boot into cm recovery with volume - and power button bot I can boot it with quickboot. This will work for flashing cyanogenmod.
Click to expand...
Click to collapse
Recovery is Volume+ and Power.
Sent from my Nexus 5 using XDA Free mobile app

codeworkx said:
Recovery is Volume+ and Power.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Yeah volume+ and power but it didn't work

codeworkx said:
Recovery is Volume+ and Power.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Yeah work. Wipe data/ factory reset na?

harshwardhan ghundare said:
Yeah work. Wipe data/ factory reset na?
Click to expand...
Click to collapse
This is NOT clockworkmod recovery. It's the stock one.
Sent from my Nexus 5 using XDA Free mobile app

codeworkx said:
This is NOT clockworkmod recovery. It's the stock one.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Which is clockworkmod recovery? Plz send me pics. And is it work for flashing cyanogenmod?
---------- Post added at 03:52 PM ---------- Previous post was at 03:50 PM ----------
You said na volume up and power. When I pressed volume up and power this stock rom appear. What can I do to get clockworkmod recovery?

harshwardhan ghundare said:
Which is clockworkmod recovery? Plz send me pics. And is it work for flashing cyanogenmod?
---------- Post added at 03:52 PM ---------- Previous post was at 03:50 PM ----------
You said na volume up and power. When I pressed volume up and power this stock rom appear. What can I do to get clockworkmod recovery?
Click to expand...
Click to collapse
Read the first post.
Only CWM will work to install CM.
Sent from my Nexus 5 using XDA Free mobile app

Before posting questions in this thread, please read the OP. Only post questions relevant to CWM recovery for the device in this thread, also.
Magnum_Enforcer
FSM

Oh yeah! I finally flash cwm recovery but it is not v6.0.5.1 it is v6.0.5.0. I think v6.0.5.1 is faulty.

Magnum_Enforcer said:
Before posting questions in this thread, please read the OP. Only post questions relevant to CWM recovery for the device in this thread, also.
Magnum_Enforcer
FSM
Click to expand...
Click to collapse
Yeah I read OP. Thanks

When I flashing cwm 6.0.5.1 and reboot into recovery doesn't appeare anything. Plz help me
---------- Post added at 06:41 AM ---------- Previous post was at 06:22 AM ----------
And when I flash to 6.0.5.0. It works but cyanogenmod.zip does not flash it says this update is for h60 not for hwH60.
---------- Post added at 06:42 AM ---------- Previous post was at 06:41 AM ----------
Means my device is hwH60
---------- Post added at 06:42 AM ---------- Previous post was at 06:42 AM ----------
Plz help me

CWM -6.0.5.1_20150321_h60_l04.img DOESN'T WORK
Hello, I flashed CWM -6.0.5.1_20150321_h60_l04.img onto my device H60-L04 after unlocking the bootloader. I tried both ways i.e by manual command line as directed by Codeworkx in the first post , which how ever didn't work... every time I hold down the power button + volume up button the phone goes into boot loop constantly displaying the HONOR logo for 3 times then boots back into the ROM, after many tries I thought of doing the same using Multitool which also results into same outcome, forcefully I had to flash cwm 6.0.5.0 from Multitool and it works properly though I haven't tried flashing custom ROM on the device yet. Please advise what could be wrong as I'm not able to figure out as I dont want to brick my device. I'm currently on EMUI 2.3 rooted using multitool.

Upgrade to b310/b370 before flashing cwm to get the latest bootloader. Then it should work.
Sent from my Nexus 5 using XDA Free mobile app

codeworkx said:
Upgrade to b310/b370 before flashing cwm to get the latest bootloader. Then it should work.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Do I have to relock the bootloader and unroot for upgrading to b310/b370 ? I haven't made any changes to build.prop though. Kindly advise.

hexcoder said:
Do I have to relock the bootloader and unroot for upgrading to b310/b370 ? I haven't made any changes to build.prop though. Kindly advise.
Click to expand...
Click to collapse
L04 yes? Download this: http://d-h.st/qErv (credits go to codeworkx). Extract update.app to your internal storage or micro-sd card in a directory named dload. Turn the phone off then hold all 3 buttons (power and volume +/-) for 5 seconds. Once it boots up it will install a fresh version of B370. This should wipe everything so make a backup first.
You don't need to relock anything.

Currently I have a B390 and CWM 6.0.5.1 ( codeworx ) . If I want to come back from B390 to B380 , it should now upload Stock recovery for B380 or B390 ? I Loading both and unroot and constantly throws me an error in recovery during installation B380.
...........................................
Admin please delete this post .

Could you add support for the CUST partition ? This partition is not included in the backup and is not available for format. This feature could be usefull because the partition has 512MB and a custom rom could use it to add stuff.

Related

[Q] First attempt at custom ROM --> [ROM][JB] All Star Rom v6

Happy New Year
First attempt at custom ROM, heard great things about All Star Rom - going straight for the v6! Unless told not to ... LOL
Have a rooted device,with latest TWRP recovery 2.3.3.1-hercules .tar flashed.
Have v6 and All-Star 4.2 custom gapps downloaded.
Copy of instructions for reference sake:
TWRP recovery recommended!
- wipe data
- wipe system
-(Use Darkside Super wipe if still on cwm 5.0.2.7 or below)
- flash rom
- flash All-Star 4.2 gapps
- wipe cache/ dalvik cache.
- reboot and wait 10 mins
- reboot and wait 1 minute
- Grant Superuser permissions for Switchme
- set up device.
- Initiate the CPU sleeper app
- (Highly Recommended) ENJOY!
Booting into TWRP recovery,
I don't specifically have a "wipe data" option, I want to be very thorough here.
Under "Wipe" I have Cache, Dalvik Cache, Factory Reset, ... and System.
Quick answer? Thanks.
Hey, happy new years justaguy705. Nice to see you asking questions again.
To answer your question, the option where you see "Factory Reset" is the exact same as "Wipe data". Cheers!
FineTalent said:
Hey, happy new years justaguy705. Nice to see you asking questions again.
To answer your question, the option where you see "Factory Reset" is the exact same as "Wipe data". Cheers!
Click to expand...
Click to collapse
Thank you once again mate - nice artwork submission btw. :good:
justaguy705 said:
Thank you once again mate - nice artwork submission btw. :good:
Click to expand...
Click to collapse
I keep getting "Sorry, you are limited to 8 thanks per day" so thanks! I hope you'll enjoy the All-Star ROM, feel free to ask questions in the Development section, as you'll get quicker responses there. Once again, good luck on your ROM flashing journey, ahaha.
Do I reboot at the first welcome screen?
WoW !!!!!
justaguy705 said:
Do I reboot at the first welcome screen?
Click to expand...
Click to collapse
Sorry for the late reply, yes, you will be greeted with the first welcome screen (the one where you have to choose language, enter your Google account, etc...)
Thanks! No sweat at the late reply, was just paranoid at that stage.
Been playing for the past couple hours -- what a difference! Thanks for the "recommendation!"
Is this possible to do completely throu my phone i dont have access to a computer im rooted on stock rom
Sent from my SGH-T989D using xda app-developers app
schkeet said:
Is this possible to do completely throu my phone i dont have access to a computer im rooted on stock rom
Sent from my SGH-T989D using xda app-developers app
Click to expand...
Click to collapse
Unless you have a recovery system already. You will need a computer to install a recovery system such as TWRP 2.3.3.0 to your phone through Odin (PC application).
Yes it is. I rarely use or never use computer now.
---------- Post added at 05:54 PM ---------- Previous post was at 05:52 PM ----------
FineTalent said:
Unless you have a recovery system already. You will need a computer to install a recovery system such as TWRP 2.3.3.0 to your phone through Odin (PC application).
Click to expand...
Click to collapse
Doesn't being rooted means he rooted himself via a recovery, unless he flashed stock rom again. In which it would wipe his recovery.
cricketAC said:
Yes it is. I rarely use or never use computer now.
Click to expand...
Click to collapse
Hm, interesting... care to elaborate? It would definitely help out schkeet, your answer is rather blunt.
---------- Post added at 05:58 PM ---------- Previous post was at 05:55 PM ----------
Doesn't being rooted means he rooted himself via a recovery, unless he flashed stock rom again. In which it would wipe his recovery.
Click to expand...
Click to collapse
He may have a custom recovery file, but from what I know to install the latest and recommended TWRP recovery you would need to have a computer to flash it. But you are free to explain to him with your steps to flashing without a computer.
Thank you i have cwm installed not sure what version or how to check thou..i rooted my phone back in the summer
Sent from my SGH-T989D using xda app-developers app
schkeet said:
Thank you i have cwm installed not sure what version or how to check thou..i rooted my phone back in the summer
Sent from my SGH-T989D using xda app-developers app
Click to expand...
Click to collapse
Make sure your phone is off and not connected to a USB cable. Press and hold the "volume up/volume down" keys and then press the power button until you feel a vibrate and the screen turns on. After that you should be in recovery mode and it will say the version you are using. If you have a CWM recovery version greater than 6.0 you should be able to flash a ROM through your phone.
Yeah mines only 5.0.2.6 i need a computer to upgrade?
schkeet said:
Yeah mines only 5.0.2.6 i need a computer to upgrade?
Click to expand...
Click to collapse
Yes, to flash most of the newer ROMs for our phone it is recommended to use the latest CWM or TWRP recovery for our phones.
schkeet said:
Is this possible to do completely throu my phone i dont have access to a computer im rooted on stock rom
Sent from my SGH-T989D using xda app-developers app
Click to expand...
Click to collapse
You could use Mobile Odin to flash TWRP or CWM but Mobile Odin doesn't have all the features that regular Odin does.
Sent from my SAMSUNG-SGH-T989 using xda premium
FineTalent said:
Yes, to flash most of the newer ROMs for our phone it is recommended to use the latest CWM or TWRP recovery for our phones.
Click to expand...
Click to collapse
Ok perfect how do i upgrade cmw or switch to twrp (whichever is the better choice)
schkeet said:
Ok perfect how do i upgrade cmw or switch to twrp (whichever is the better choice)
Click to expand...
Click to collapse
To flash TWRP on to your phone and you still do not have access to a computer, you can try using the Mobile Odin app on the Play store as android88 had mentioned above (however, the app is around $5.00 if you're willing to purchase it). Otherwise, flashing the recovery system through Odin using a computer is the way to do it.
FineTalent said:
To flash TWRP on to your phone and you still do not have access to a computer, you can try using the Mobile Odin app on the Play store as android88 had mentioned above (however, the app is around $5.00 if you're willing to purchase it). Otherwise, flashing the recovery system through Odin using a computer is the way to do it.
Click to expand...
Click to collapse
Oh im sorry for the confusion i have access to a friends computer (the same i used to root my phone) for the day just need instructions on how to go about doing it

[Q] Stuck @ BootUP in Screen which shows Devicename

Hi everyone
I got a Galaxy Note 8.0 N5100 from Austria and everytime I try to flash any 4.2.2 ROM, my Note is stuck in the boot screen.
I did full wipes, formated /system everytime before flashing but still got this problem.
Any help would be really appreciated ,
thx in advance
I have the same issue, still waiting for help
Sent from my GT-N5110 using XDA Premium 4 mobile app
---------- Post added at 01:09 PM ---------- Previous post was at 01:04 PM ----------
Just found this try twrp instead
http://forum.xda-developers.com/showthread.php?p=44224168
Sent from my GT-N5110 using XDA Premium 4 mobile app
You should try Odin flashing 4.2.2. Get it from here: http://samsung-updates.com/device/?id=GT-N5100. Then Odin flash CWM recovery then flash the rom of our choice.
thx for your answers,
flashing via Odin worked, but can't flash a single custom ROM through recovery.
daimi85 said:
thx for your answers,
flashing via Odin worked, but can't flash a single custom ROM through recovery.
Click to expand...
Click to collapse
install custom cwm or twrp..
search it here in xda
jhonuy03 said:
install custom cwm or twrp..
search it here in xda
Click to expand...
Click to collapse
still not working,
flashing any custom ROM still gets my device to hang in the boot screen.
Before flashing I'm always doing a full wipe incl. system.
Plz help, I really want to enjoy Civatos CustomRom.
thx
daimi85 said:
still not working,
flashing any custom ROM still gets my device to hang in the boot screen.
Before flashing I'm always doing a full wipe incl. system.
Plz help, I really want to enjoy Civatos CustomRom.
thx
Click to expand...
Click to collapse
did you download it directly on your device?
if yes download it in your pc then transfer it to your sd card
jhonuy03 said:
did you download it directly on your device?
if yes download it in your pc then transfer it to your sd card
Click to expand...
Click to collapse
No, I downloaded it to PC first, also checked MD5.
I really don't know what to do

[Q] Bricked sprint LG G2

No Rom...No Downloading Mode, no Recovery mode any solution???...I don't know what to do...Please Help....!!!!!!Only ADB connection to windows 7...
Panagiotisgate13 said:
No Rom...No Downloading Mode, no Recovery mode any solution???...I don't know what to do...Please Help....!!!!!!Only ADB connection to windows 7...
Click to expand...
Click to collapse
What did you do.
Did you install twrp.
Sent from my LG-LS980 using xda premium
I did this:From the first thread of this page http://forum.xda-developers.com/showthread.php?t=2596175&page=19
but I tried to install the rom of D802...The flash completed with no problem but when my phone started the touch didnt worked properly and It was booting all the time....Then I tryied to install the stock rom of Ls 980 but I couldn't because I had change the name of the model from build prop...After that I renamed the stock ls980 rom file tot and dll, I flased it but at the end of the flash occured a problem....I disconected the usb but my phone couldn t boot...Recovery and downloding mode no more available....I don't know what else to do...
I dont have answer for right off.
Let check something i will try to get answer but you should check out dev form see if their any solutions
Sent from my LG-LS980 using xda premium
---------- Post added at 10:27 PM ---------- Previous post was at 10:07 PM ----------
Panagiotisgate13 said:
I did this:From the first thread of this page http://forum.xda-developers.com/showthread.php?t=2596175&page=19
but I tried to install the rom of D802...The flash completed with no problem but when my phone started the touch didnt worked properly and It was booting all the time....Then I tryied to install the stock rom of Ls 980 but I couldn't because I had change the name of the model from build prop...After that I renamed the stock ls980 rom file tot and dll, I flased it but at the end of the flash occured a problem....I disconected the usb but my phone couldn t boot...Recovery and downloding mode no more available....I don't know what else to do...
Click to expand...
Click to collapse
Ok this how to get your into download mode.
This must be done at same time keep in mind.
Turn phone off.
Hold down upper and lower buttons down and plugin usb this should take you download mode.
Recovery can done but dont plugin usb.
Sent from my LG-LS980 using xda premium
Thanks you very much for your ansewer......I will check it tomorrow because now I am not at my home....So when I will do it,I will inform you...Do you believe after that I could flash the stock rom?Thanks for now....
mchlbenner said:
I dont have answer for right off.
Let check something i will try to get answer but you should check out dev form see if their any solutions
Sent from my LG-LS980 using xda premium
---------- Post added at 10:27 PM ---------- Previous post was at 10:07 PM ----------
Ok this how to get your into download mode.
This must be done at same time keep in mind.
Turn phone off.
Hold down upper and lower buttons down and plugin usb this should take you download mode.
Recovery can done but dont plugin usb.
Sent from my LG-LS980 using xda premium
Click to expand...
Click to collapse
This solution doesn't work...When I press the buttons to get me in downloading mode it takes to a fastboot...
I finally installed TWRP.img with adb_fastboot,now I have a recovery mode but how do I transfer to sd card the rom I want to install?Any help?
Sent from my LG-LS980 using xda premium
Make what ever you flash is meant for this phone.
Track down twrp 2.6.3.4 for ls980 flash it it supports slide loading a rom.
Read on this frist .
mchlbenner said:
Sent from my LG-LS980 using xda premium
Make what ever you flash is meant for this phone.
Track down twrp 2.6.3.4 for ls980 flash it it supports slide loading a rom.
Read on this frist .
Click to expand...
Click to collapse
I can't flash it because I don't know how....twrp 2.6.3.2 doen't support slide loading...
You need to update to twrp 2.6.3.4 it does support sideload.
Look above thats what you need twrp 2.6.3.4
Sent from my LG-LS980 using xda premium
mchlbenner said:
You need to update to twrp 2.6.3.4 it does support sideload.
Look above thats what you need twrp 2.6.3.4
Sent from my LG-LS980 using xda premium
Click to expand...
Click to collapse
You don't understand,I can't flash twrp 2.6.3.4 zip file...The only thing I can do is to flash twrp.img files with fastboot....
Panagiotisgate13 said:
You don't understand,I can't flash twrp 2.6.3.4 zip file...The only thing I can do is to flash twrp.img files with fastboot....
Click to expand...
Click to collapse
You should beable to get to recovery by holding down top and and lower buttons .
You can try holding down top button and power button this will take you to hardreset do it and it will take you to recovery.
Sent from my LG-LS980 using xda premium
mchlbenner said:
You should beable to get to recovery by holding down top and and lower buttons .
You can try holding down top button and power button this will take you to hardreset do it and it will take you to recovery.
Sent from my LG-LS980 using xda premium
Click to expand...
Click to collapse
Do you know if there is a way to put my phone in fast boot mode because I have the downloading mode active again and the only firmware I can install is the d802.kdz with lg flash tool 1.05 or if you know where to find an Ls980.kdz file? Tot file doesn't work for me right now....
mchlbenner said:
Sent from my LG-LS980 using xda premium
Make what ever you flash is meant for this phone.
Track down twrp 2.6.3.4 for ls980 flash it it supports slide loading a rom.
Read on this frist .
Click to expand...
Click to collapse
the flash u had given dosent work in adb sideload command..
i have bricked my phone LG G2 Sprint.
and need to install/flash the TWRP
U are the hope..
please help
---------- Post added at 06:18 PM ---------- Previous post was at 06:12 PM ----------
is this, the one u uploaded, ... is the 2.6.3.4twrp?
Stocked in Afastboot mode starter and my download mode not working after doing n XDA
i need help total noob here i need step by step on how to get my g2 back to life non of the above helped me
Desperate!!! Bringing thread back to life. Same problem. NO recovery mode at all, only DL mode. Please help! TOT restored, still no recovery. NO root, no ability to do so.
baublitz said:
Desperate!!! Bringing thread back to life. Same problem. NO recovery mode at all, only DL mode. Please help! TOT restored, still no recovery. NO root, no ability to do so.
Click to expand...
Click to collapse
So you were able to tot back to which version?
Your phone is still identified as ls980. If you have zvc, use ioroot25 and auto-rec to get recovery.
Panagiotisgate13 said:
Do you know if there is a way to put my phone in fast boot mode because I have the downloading mode active again and the only firmware I can install is the d802.kdz with lg flash tool 1.05 or if you know where to find an Ls980.kdz file? Tot file doesn't work for me right now....
Click to expand...
Click to collapse
Which driver are you using for the lg flash tool?
Is it a universal one or one for d802?
Sent from my Nexus 7 using Tapatalk
secret.animal said:
So you were able to tot back to which version?
Your phone is still identified as ls980. If you have zvc, use ioroot25 and auto-rec to get recovery.
Which driver are you using for the lg flash tool?
Is it a universal one or one for d802?
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
Thank you my friend for your respond but I changed my phone...My ls980 I had unbricked it I sold it..Now my phone is lg g2 f320...
I would root and auto-rec, but all the root methods I have found require a recovery mode. Even when plugged into adb, the phone will not force into recovery. Is there a way to root without recovery mode?
Thanks.
---------- Post added at 05:50 PM ---------- Previous post was at 05:35 PM ----------
secret.animal said:
So you were able to tot back to which version?
Your phone is still identified as ls980. If you have zvc, use ioroot25 and auto-rec to get recovery.
Which driver are you using for the lg flash tool?
Is it a universal one or one for d802?
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
ZVC. I would root and auto-rec, but all the root methods I have found require a recovery mode. Even when plugged into adb, the phone will not force into recovery. Is there a way to root without recovery mode?
Thanks.
baublitz said:
I would root and auto-rec, but all the root methods I have found require a recovery mode. Even when plugged into adb, the phone will not force into recovery. Is there a way to root without recovery mode?
Thanks.
---------- Post added at 05:50 PM ---------- Previous post was at 05:35 PM ----------
ZVC. I would root and auto-rec, but all the root methods I have found require a recovery mode. Even when plugged into adb, the phone will not force into recovery. Is there a way to root without recovery mode?
Thanks.
Click to expand...
Click to collapse
Ioroot 25, will do the trick. Airplane mode, USB debugging on. No recovery necessary. Then install auto-rec and run.
Sent from my LG-LS980 using Tapatalk

[recovery][cwm]

THANKS to @svetius for accepting my request to add this device to the forum.
CWM RECOVERY FOR XOLO Q1010I
FLASH THROUGH SPTOOLS
DOWNLOAD RECOVERY - http://d-h.st/R4H
Scatter File - http://d-h.st/YkW
Steps to flash
1) Open SP FLASH TOOL.
2) Click on SCATTER-LOADING.
3) Select downloaded scatter file.
4) Click on recovery and select the downloaded recovery image.
5) Click on download button.
6) Connect your phone in switch off mode.
7) A GREEN CIRCLE will be displayed after 10-15 seconds.
YOU HAVE SUCCESSFULLY FLASHED CWM RECOVERY
TEST IT BY PRESSING (POWER BUTTON+VOLUME UP BUTTON) SIMULTANEOUSLY AND SELECT RECOVERY MODE.
FLASH AT YOUR OWN RISK
Click to expand...
Click to collapse
It is for kitkat or for jellybean.. U must mention this think bro..
It is flashable with sptool so it should be for kitkat.. Tell me?
Sent from my Q1010i using Tapatalk
---------- Post added at 07:21 AM ---------- Previous post was at 07:12 AM ----------
And u must provide scatter file for sp tool ..
Sent from my Q1010i using Tapatalk
Does it works????
and how did you compiled it???
jattxjatt said:
It is for kitkat or for jellybean.. U must mention this think bro..
It is flashable with sptool so it should be for kitkat.. Tell me?
Sent from my Q1010i using Tapatalk
---------- Post added at 07:21 AM ---------- Previous post was at 07:12 AM ----------
And u must provide scatter file for sp tool ..
Sent from my Q1010i using Tapatalk
Click to expand...
Click to collapse
it is for both jb and kk.
scatter file uploaded.
reconfigured said:
does it works????
And how did you compiled it???
Click to expand...
Click to collapse
it is working dude.
Really.. It is working for kk nd jb both ?????? ..
Sent from my Q1010i using Tapatalk
rishusngh said:
it is working dude.
Click to expand...
Click to collapse
Gr8 to know just see your PM...
Thanks for CWM Recovery. Please provide Touch Supported CWM Recovery...
Sent from Xolo Q1010i using XDA free app..
can you put some screenshots???
incase you get locked at abd sideload <filename>"...
just press power button + volume dowm button for 10sec
phone will restart...:silly:
flashable version
I am currently having TWRP and want to switch to CWM
Is there a phone flashable version of this recovery?
I am using linux at home and cant run SP Flash tool
Added Later ** - For those with the above issue, I used Rashr from Play store to flash CWM file. Working great, thanks
Sir i want to boot my phone into recovery mode but i have not installed any recovery.. How i can install recovery without pc and give me how to root my phone.. Please provide me.

GT-I9192I ( I9192iXXU1AOB1) Android 4.4.4 unable to install TWRP or CWM

Hi Guys,
tomorrow is a holiday, my stock Rom is using 95% of my 1,5 GB RAM, so I decided to install cyanogenmod 13 on my GT-I9192I.
- Yes ist the Version with 4 CPU Cores and Android 4.4.4 -
I searched the web, read a lot of posts about what to do.
So my plan was first to install a Recovery Boot Loader like TWRP or CWM.
After Reading 3, 4 Howtos i felt ready to start. ( Of Course I made a backup of all my data on the Phone! )
Downloaded Odin and the recovery.zip - flashing so far everying fine.
BUT I am unable to boot into my custom Bootloader. Volume Up + Power always start the Stock Rom Bootloader.
After trying lot of different Versions
recovery-clockwork-6.0.4.6-serranodsub.tar or
recovery-clockwork-6.0.5.1-serranodsdd.tar or
CF-Auto-Root-serranods-serranodsxx-gti9192
I am now at the point where I don't know how to continue.
My plan was first to do a Backup from my rom, after I got an Bootloader installed, but it's not working.
The good thing - my Phone still works . So I used Kingroot to root my Phone and installed ROM Manager.
He says: Clockworkmod Recovery already installed and TWRP also installed - but I can't boot it.
dropbox.com/sh/ixluu5xjvlh5ftj/AAA4GyaqdKS7dIP3Yr-a8i96a?dl=0&preview=20160525_230750.jpg
If I say " Create a Backup of the current ROM" the Device Reboots but in the Stock Loader.
What a I doing wrong? Attached some Photos:
dropbox.com/sh/ixluu5xjvlh5ftj/AAA4GyaqdKS7dIP3Yr-a8i96a?dl=0
Best regards
Dog
Your model is the serranove3g
Sent from my GT-I9195I using XDA-Developers mobile app
---------- Post added at 08:45 AM ---------- Previous post was at 08:42 AM ----------
Download from here: http://forum.xda-developers.com/showthread.php?t=3182207
Sent from my GT-I9195I using XDA-Developers mobile app
---------- Post added at 08:47 AM ---------- Previous post was at 08:45 AM ----------
And also, cm13 isn't out for your phone, there's only a version of cm11 out
Sent from my GT-I9195I using XDA-Developers mobile app
Hi Droidking,
thanks very much, are u sure its not out?
https://download.cyanogenmod.org/?device=serrano3gxx
I also found this here:
http://forum.xda-developers.com/gal...-i9192-cyanogenmod-13-0-s4-mini-duos-t3297091
DroidKing18 said:
Your model is the serranove3g
[/COLOR]Download from here: http://forum.xda-developers.com/showthread.php?t=3182207
[/COLOR]And also, cm13 isn't out for your phone, there's only a version of cm11 out
Click to expand...
Click to collapse
best regards
I'm 100% sure it hasn't been released. Your phone is the i9192i not the i9192 and the serranove3g not serrano3g.
Sent from my GT-I9195I using XDA-Developers mobile app
Ok thanks - I hoped on an up 2 date system but so....
Thread can be closed, the install from CWM worked fine.
Best regards

Categories

Resources