Related
Just an FYI, you may want to remove the stylus before removing the back battery cover. I'm sure some of you have heard there are a number of us Rhoduim owners found that out the hard way. It's written in the manual, this should be done before removing the back battery cover. What results from you not doing this is the battery cover get just the slightest little bend on the side the stylus inserts, then it will never fit the same.
I am still skeptical this is the reason why, but it really doesn't matter what I think at this moment. I know myself and a few others had to modify ours to get it to fit like its suppose to and there are others this didn't happen to. So just to let you know, better to be safe than sorry. Fortunately, my seller from overseas is sending me a new one (back battery cover). Hope for the best and enjoy this very cool device.
Thanks for the nice tip.
I'll keep this in mind.
FWIW: It appears the back of the T-Mo USA version is different from the ones that people are reporting problems with...I've taken mine off several times (with stylus in place) and I can't see where the cover tabs would be affected by the stylus...
Additionally, the T-Mo USA manual makes no mention of stylus removal prior to cover removal.
I've taken mine off 2-3 times with the TMO TP2 and have no problems with the stylus being in there.
glhs509 said:
FWIW: It appears the back of the T-Mo USA version is different from the ones that people are reporting problems with...I've taken mine off several times (with stylus in place) and I can't see where the cover tabs would be affected by the stylus...
Additionally, the T-Mo USA manual makes no mention of stylus removal prior to cover removal.
Click to expand...
Click to collapse
I agree, I looked and studied where the stylus inserts in the back and I can't see where the stylus would have any effect on the removal of the back battery cover. But my back cover did need some modifying to fit properly again. It has a very slight bend on the side where the stylus inserts (just barely noticeable).
I didn't know it wasn't mentioned in the T-moe's manual. I was just trying to give y'all a heads up. I have never been one to open up the manual first, before taking off the battery door to install the battery. I guess now I know I should.
Supertrooper said:
Just an FYI, you may want to remove the stylus before removing the back battery cover. I'm sure some of you have heard there are a number of us Rhoduim owners found that out the hard way. It's written in the manual, this should be done before removing the back battery cover. What results from you not doing this is the battery cover get just the slightest little bend on the side the stylus inserts, then it will never fit the same.
I am still skeptical this is the reason why, but it really doesn't matter what I think at this moment. I know myself and a few others had to modify ours to get it to fit like its suppose to and there are others this didn't happen to. So just to let you know, better to be safe than sorry. Fortunately, my seller from overseas is sending me a new one (back battery cover). Hope for the best and enjoy this very cool device.
Click to expand...
Click to collapse
Been using the device for a month to date, hasn't been an issue for me.
I've only removed my battery cover around 8 times just to show iphone users what their phone can't do.
Just saw the hardware tour video of the T.Mobile Touch Pro2 and the casing design is very different from European/Asian HTC Touch Pro2 version, and from the video, it doesn't look like one needs to remove the stylus before removing the cover on the T.Mobile version.
On my Asian version, the stylus goes through an opening in the middle of the side of the removable back cover (on T.Mobile version, there is no opening), so while it may not be necessary to remove the stylus to take off the cover, it is advisable when replacing the cover to take it out beforehand.
The text in the user manual could have been referring to the European/Asian version, and was ported to T.Mobile without editing.
Yea, I see that now. I just didn't want these guys to have to go through the crap I had to go through with a brand new high dollar device.
Mods you can delete or close this thread if you like.
It's good to discuss these things sometimes. I much prefer the T.Mobile version - it has a better casing design than the European/Asian one, especially with the reset button.
are you joking?
The T-Mobile USA version looks horrid in comparison to the svelt european version.
They even crippled the software with the horrid Touchflo remix.
If I had to have the TP2 in that black USA flavour I simply wouldn't have bought it, especially with the re-assigned keyboard. I do like the idea of a reset button though.
dazkeirle said:
are you joking?
The T-Mobile USA version looks horrid in comparison to the svelt european version.
They even crippled the software with the horrid Touchflo remix.
If I had to have the TP2 in that black USA flavour I simply wouldn't have bought it, especially with the re-assigned keyboard. I do like the idea of a reset button though.
Click to expand...
Click to collapse
lol take the trolling elsewhere, then take a look what AT&T did to their version.
And if you're about to get your brand new TP2, for goodness sake, DO NOT let the people at the store put the battery in the phone. My back cover is constantly falling off now thanks to an overzealous employee 'helping' me with my phone.
dazkeirle said:
are you joking?
The T-Mobile USA version looks horrid in comparison to the svelt european version.
They even crippled the software with the horrid Touchflo remix.
If I had to have the TP2 in that black USA flavour I simply wouldn't have bought it, especially with the re-assigned keyboard. I do like the idea of a reset button though.
Click to expand...
Click to collapse
case designs are not just about looks
No, but they should have kept the chrome bezel. It was beautiful!
Soo, when it's damaged, the stylus just inserts and removes very tough at the beginning??? Correct? I haven't taken my stylus out till reading this thread, lol, and this stylus if freakin hard to remove. So, that means the back cover ****ed up my phone? lol, dam.
The T-Mobile employee put in the SIM and battery for me, I never knew about this. Dammit. Gotta take it back I guess. But that is what you guys experience when it's "damaged"? I'm getting this correct?
(And hello guys, I just got it yesterday, I'll be contributing to the community greatly, I think you guys will like me )
ace10134 said:
Soo, when it's damaged, the stylus just inserts and removes very tough at the beginning??? Correct? I haven't taken my stylus out till reading this thread, lol, and this stylus if freakin hard to remove. So, that means the back cover ****ed up my phone? lol, dam.
The T-Mobile employee put in the SIM and battery for me, I never knew about this. Dammit. Gotta take it back I guess. But that is what you guys experience when it's "damaged"? I'm getting this correct?
(And hello guys, I just got it yesterday, I'll be contributing to the community greatly, I think you guys will like me )
Click to expand...
Click to collapse
Exactly what happened to me. Accept I took off the back battery cover myself and then the battery cover was misaligned and would stay on correctly.
Supertrooper said:
Exactly what happened to me. Accept I took off the back battery cover myself and then the battery cover was misaligned and would stay on correctly.
Click to expand...
Click to collapse
Hmm. Well, the stylus is basically un-removable, unless you got fingernails and you pry it, lol.
I'll be returning it for a new one, I guess. And I'm not letting T-Mo employees touch it this time
With the release of the Best Buy exclusive White Evo.... I'm feeling kinda bummed since I just bought mine 2 weeks ago...
Does anybody know where to find original/oem/factory shell pieces, particularly the rear bezel and the battery compartment cover. I want to repaint them white or if possible, the white versions of said pieces.
Also information might be useful to DIYers?
speedycake said:
With the release of the Best Buy exclusive White Evo.... I'm feeling kinda bummed since I just bought mine 2 weeks ago...
Does anybody know where to find original/oem/factory shell pieces, particularly the rear bezel and the battery compartment cover. I want to repaint them white or if possible, the white versions of said pieces.
Also information might be useful to DIYers?
Click to expand...
Click to collapse
Pretty sure its just a white battery cover on the white ones. Which you will be able to purchase.
its more than just the battery cover.
The white 4G as far as I can tell has 2 different pieces from the original black, consisting of the battery cover and the outer rear bezel. The rubberized matte sections essentially.
The battery cover is one piece, lower frame is second piece, just the shell though, transplanting the wiring, subframes, and kickstand should be relatively easy going by the teardown images on ifixit.
I wonder if you can get the battery cover and the rear half of the phone. The back half is what houses the camera lens as well as the kickstand, so having a replacement would be nice.
I wouldn't mind another battery cover if anyone finds how where to get them. I'm sure Sprint repair stores will eventually get them in, but no idea how long that is going to take.
One to mess up, perhaps put a logo on, or the disc from those low profile car mounts, would be nice to have. They're quick and easy to pop on/off too, and it's only a matter of time before that wears out given that I replace my batteries rather than recharge them in my phone.
Edit:
I emailed HTC, lets see if they respond..
I got a response, here it is:
Thank you for contacting HTC! While HTC is proud to offer the original accessories that come standard with our extensive line-up of mobile devices we unfortunately do not have the part you are looking for. We do apologize for any inconvenience however we can direct you to two non-HTC affiliated websites that may have your desired accessory. Try browsing www.boxwave.com or www.daydeal.com. We hope your search is successful. Sincerely, HTC Customer Care
Click to expand...
Click to collapse
Original email to HTC:
I recently purchased an HTC EVO from Sprint, is it possible to purchase another battery COVER for the phone?
Thank you!
Click to expand...
Click to collapse
Response back to HTC for dumping me off to an accessory vendor:
I have visited the suggested websites (daydeal.com and boxwave.com) neither of which sells manufacturer OEM Parts for the EVO. I am not looking for an accessory, nor an after market part. I just want the exact same OEM Part that came with my EVO phone, the battery cover. Part number 71H03150-XXM. If HTC does not sell to consumers, is there anyone that HTC sells to that I may be able to purchase this part from?
Thank you!
Click to expand...
Click to collapse
I hope there is a way to get these parts, I really want to break out the airbrush and make some designs for my phone.
speedycake said:
With the release of the Best Buy exclusive White Evo.... I'm feeling kinda bummed since I just bought mine 2 weeks ago...
Does anybody know where to find original/oem/factory shell pieces, particularly the rear bezel and the battery compartment cover. I want to repaint them white or if possible, the white versions of said pieces.
Also information might be useful to DIYers?
Click to expand...
Click to collapse
Return it and swap it out, thats what i did. Was no problem, as long as your within your 30 days. no restock fee either.
apristel said:
Pretty sure its just a white battery cover on the white ones. Which you will be able to purchase.
Click to expand...
Click to collapse
no its not just a white battery cover, the sides are white as well (well 1/2 white)
OneStepAhead said:
Return it and swap it out, thats what i did. Was no problem, as long as your within your 30 days. no restock fee either.
Click to expand...
Click to collapse
That is only if you purchased your phone at BestBuy and did not purchase on launch day (it's now past the 30 days.) It's not due out at Sprint stores until mid to late August. BestBuy has the exclusive until then.
Another update from HTC. So they aren't available right now, but might be in the future it seems:
Thank you for contacting HTC! At this time I am not aware of anybody who carries the OEM back cover for this. We should be supporting this soon, however I do not have an exact date that the accessories will be available. Sincerely, HTC Customer Care
Click to expand...
Click to collapse
Found them on ebay listed as "OEM Housing"... Might order one or two and try to see how they hold up being sanded and repainted.
I found an OEM battery cover on ebay, but they want $30 for it. A little steep in my opinion.
http://cgi.ebay.com/New-Authentic-O...ultDomain_0&hash=item27b3386a12#ht_500wt_1154
I also found the OEM back chassis and battery cover.
http://cgi.ebay.com/HTC-EVO-4G-OEM-...ccessories&hash=item255bc105c4#ht_1705wt_1137
Doesn't look like it includes a new lens cover, so the lens cover may be built into the camera. That means no replacing it.
In the second listing they illustrate that it's from Samsung, so they are the actual OEM and HTC purchased the parts/phone from them. I wonder if we'll have better luck purchasing from Samsung or an authorized reseller..
Sirchuk said:
I also found the OEM back chassis and battery cover.
http://cgi.ebay.com/HTC-EVO-4G-OEM-...ccessories&hash=item255bc105c4#ht_1705wt_1137
Click to expand...
Click to collapse
Close but the branding is different. No HTC on the back cover and it says "with Google" instead of "Sprint 4G" near the bottom.
No big deal I just wonder if these are real OEM parts or if they are about to get ripped for copyright infringement...
nebenezer said:
Close but the branding is different. No HTC on the back cover and it says "with Google" instead of "Sprint 4G" near the bottom.
No big deal I just wonder if these are real OEM parts or if they are about to get ripped for copyright infringement...
Click to expand...
Click to collapse
Yeah, the first one says it's OEM and from Samsung, the second just says that it's "HTC EVO Compatible" so it's not OEM, and probably a knockoff. Especially since he's in China. We should start seeing them cheaper soon then.
Sirchuk said:
Yeah, the first one says it's OEM and from Samsung, the second just says that it's "HTC EVO Compatible" so it's not OEM, and probably a knockoff. Especially since he's in China. We should start seeing them cheaper soon then.
Click to expand...
Click to collapse
Definitely a good candidate for modding but I hope you are right about them getting cheaper!!
$55 Yowza!
Sirchuk said:
Yeah, the first one says it's OEM and from Samsung, the second just says that it's "HTC EVO Compatible" so it's not OEM, and probably a knockoff. Especially since he's in China. We should start seeing them cheaper soon then.
Click to expand...
Click to collapse
Notably, I've found a few wholesale retailers for back housings that have the HTC logo on it but no chrome badging, this is perfectly flat however which means to me, an easier painting process.
Personally I don't care
I just dropped my brand new EVO today, ON THE CONCRETE!!!!!!!!
Well, the only portion that took damage externally, to my knowledge in other words, is the front bevel. I really do not like the blemishes so I went ahead and paid for the $55 set. There was a cheaper $40 option but I didn't see that till after purchasing the $55 set. If everything is legit, considering not just getting the parts I want to replace but also some of the tools needed to do the job, $55 was ok with me.
I'll keep you guys updated. Should be here next week or two. We'll see.
I want a white center with a black battery cover!
Sent from my Evo, using the xda app
Sirchuk said:
I wonder if you can get the battery cover and the rear half of the phone. The back half is what houses the camera lens as well as the kickstand, so having a replacement would be nice.
I wouldn't mind another battery cover if anyone finds how where to get them. I'm sure Sprint repair stores will eventually get them in, but no idea how long that is going to take.
One to mess up, perhaps put a logo on, or the disc from those low profile car mounts, would be nice to have. They're quick and easy to pop on/off too, and it's only a matter of time before that wears out given that I replace my batteries rather than recharge them in my phone.
Edit:
I emailed HTC, lets see if they respond..
Click to expand...
Click to collapse
maybe this will work for you maybe you seen it already but we still need some pre-orders to get this to production. Would you mind helping? Imo they will be better than oem doors! Probably cheaper too.
http://forum.xda-developers.com/showthread.php?t=735830
haha, I should start looting some of the pieces from my technician buddy's at sprint, all they do is stockpile them, no one would notice if they were missing a few lol. only problem is I couldn't see doing it for less than like 40$-60$, gotta split it 2 ways lol
I got a replacement from Amazon because my earlier defy had a random reboot problem. However now I have two phones with me and when I compare them, the newest replacement seems very plasticky. The black model of european seems to be like a bad paint job of white US model coated with a black paint. Also the volume rocker and power buttons make the plastic sound when pressed.
Is this the latest european model that is being released in the market. If yes, then most of you who bought these pieces have a sub-standard quality of this phone. I loved my old phone and the smooth finish with extra smooth buttons.
Any inputs from anyone?
I have a European version which exhibits none of the symptoms you describe.
Got mine at amazon(.fr) two weeks ago to replace my desire (it fell hard on the floor and the glass is now broken).
I see the exact same symptoms you describe: cheap power and volume buttons, and overall very plasticky look and feel. That was kind of a disappointment. Then i have been even more disappointed when i realized i wouldn't be able to flash custom roms - i miss my cyanogen.
Well, this is a kind of cheap android device and it sure feels cheap. Won't buy any another moto device nor would i recommend it, that's for sure. In the meantime i try to get the best out of it.
Your experiences sure are odd. If you had not both specified that you got your phones from Amazon, I would have thought you had used ebay and gotten some shoddy copies of a fine device.
That said, the phone does use a lot of plastic, but that is something that any review will tell you.
And who does not read at least one review before buying a device nowadays?
The same goes for what can be done, ROM-wise. I checked out XDA Developers before I clicked the final 'Purchase' button, so in that regard there were no surprises for me either.
Sure reviews tell you it uses plastic. But whatever you read, unless you experience it for yourself you don't really realize. Concerning the power and volume buttons, i didn't realize it wasn't normal until i read the op.
Beside, one only really reads what seems to matter at the time of the reading: this is a super-resistant device -- put it under water, throw it against the walls, hell, yeah, i'm all in. That's what got me on board, i didn't really thought about roms, and next time i will pay more attention.
So, yes, i'm a bit disapointed, but Android still is a great toy, even with *that* device.
naenee said:
Your experiences sure are odd. If you had not both specified that you got your phones from Amazon, I would have thought you had used ebay and gotten some shoddy copies of a fine device.
That said, the phone does use a lot of plastic, but that is something that any review will tell you.
And who does not read at least one review before buying a device nowadays?
The same goes for what can be done, ROM-wise. I checked out XDA Developers before I clicked the final 'Purchase' button, so in that regard there were no surprises for me either.
Click to expand...
Click to collapse
I think you dint read my question quite right. What i opined was that my first defy which I just returned back to amazon was a gem. It has those buttons as soft as rubber and the body build itself was different. I used it for 4months and had to give it back to due some hardware problem. Now the one I got yesterday seems a completely different build. Now those are things that no review will be able to tell you right?. Something I thought I will share with other users. It might be that Motorola just started to produce this kind of cheap builds owing to surge in demand.
That said, no complaints on this one too. But i do miss that classic finish and soft soundless buttons.
gdodinet said:
Got mine at amazon(.fr) two weeks ago to replace my desire (it fell hard on the floor and the glass is now broken).
I see the exact same symptoms you describe: cheap power and volume buttons, and overall very plasticky look and feel. That was kind of a disappointment. Then i have been even more disappointed when i realized i wouldn't be able to flash custom roms - i miss my cyanogen.
Well, this is a kind of cheap android device and it sure feels cheap. Won't buy any another moto device nor would i recommend it, that's for sure. In the meantime i try to get the best out of it.
Click to expand...
Click to collapse
Did you get a BT/BF or blue dot device from Amazon.fr?
I was planning on buying a Defy from Amazon but this is bad news...
Why is it so hard to get a decent Defy... First there was the earpiece problem, now this.
I got mine from clevertronic.de in mid November, think it wasn't even out on amazon.de by then.
I also thought that the power and volume button seemed rather cheap looking... and clacking (at the beginning I didn't know where that clacking sound came from, thought something was wrong with the drive or something).
But until now I thought that'd be normal so I didn't complain.
Really odd.
"I tought this was normal until I read this post"
I don't really understand these people complaining about previously-normal (to them) things. It's like when the fear spreads for a pandemic.
I have got a BT33 black european defy, and I repute the build quality excellent even for that price. Sure, it is plastic, but what did you expect from a €300 phone? Brushed aluminium?
Do you think that more expensive phones are all metal builds?
Just look at the Acer Liquid Metal: you can long see it from the pics it won't be nearly the same build quality of the Defy, that it will screak when held in hand. Despite the name, it only comes with a small strip of metal in the back. I also guess the front glass is not even glass, let alone gorilla glass. And that's for €50 more than a Defy.
Anyways mine has no creaking when squeezed in the hand, the back cover paint is soft-touch and well done, the front bezel is well built, glass is perfectly aligned, back cover not bulging, side covers intact, and the volume keys only make a slight click if I shake the phone.
You're all being too picky.
Mine is an all black European model. The buttons are plastic rather than rubber but they don't rattle about or click, and i've never thought of them as being cheap-feeling.
The paint finish on the screws did start to wear off pretty quickly though.
Also have the european black model, from november.
Plastic buttons that rattle slightly, and frontshell dont fit 100% with the backshell. Everything else looks quite expensive.
For around 300€ with the powerful hardware inside its a catch in my opinion.
Sent from my Defy
FWIW, T-MO USA just sent me a replacement Defy. Not the Euro model, of course. But the same high quality of my original and has the BT prefix.
Got mine from telstra aus. It's sweet. I've soaked it in beer and dropped it numerous times. Not a scratch!
Sent from my MB525 using XDA App
scrannel said:
FWIW, T-MO USA just sent me a replacement Defy. Not the Euro model, of course. But the same high quality of my original and has the BT prefix.
Click to expand...
Click to collapse
What are you referring to with 'Euro model'? Do you mean the version with the white rubber section, as opposed to it being black?
I wasn't aware either was area/continent-specific, as both can be purchased in Europe.
If you are somehow implying that European build quality is less than.. well, the build quality of where-ever you are, I doubt there is any difference.
To strengthen my argument i am going to post snaps of the two variants tonight. Hopefully my wife should not have mailed it off to amazon.
Sent from my MB525 using XDA App
Please do, I find pictures help a lot when trying to explain something about the look of a product.
naenee said:
What are you referring to with 'Euro model'? Do you mean the version with the white rubber section, as opposed to it being black?
I wasn't aware either was area/continent-specific, as both can be purchased in Europe.
If you are somehow implying that European build quality is less than.. well, the build quality of where-ever you are, I doubt there is any difference.
Click to expand...
Click to collapse
I meant the phone mentioned above with the all black case. Not saying the Europeans don't know how to make good phones since they're most all made in China anyway (I hear there are some made in South America). But the poster was suggesting he had gotten a low quality phone. T-MO in the US only ships the phone with the white case, I believe.
I alos have a European version which exhibits some of the symptoms you describe.
scrannel said:
I meant the phone mentioned above with the all black case. Not saying the Europeans don't know how to make good phones since they're most all made in China anyway (I hear there are some made in South America). But the poster was suggesting he had gotten a low quality phone. T-MO in the US only ships the phone with the white case, I believe.
Click to expand...
Click to collapse
Indeed, they're made in Asia - I would have suggested that as a counter, but seeing your reply, that's not necessary.
Ah, I see. I think some materials had to be different due to this phone being sturdier. Plastic and rubber can be very durable.
SemperEgo said:
Did you get a BT/BF or blue dot device from Amazon.fr?
Click to expand...
Click to collapse
I'm not sure what you're referring to with BT/BF and "blue dot device", so i guess that's a no: i didn't get such a phone from amazon.
I'm looking for a good book/diary/wallet style case for my new T-Mobile Galaxy SII. Something like the BookBook case for the iPhone:
http://twelvesouth.com/products/bookbook_iphone/
or this case for the international Galaxy SII:
http://www.bizwinkorea.com/tablet-p...ine-leather-diary-wallet-type-case-cover.html
I'd kinda want it to look like a leatherbound book, but that's not as important as it actually being leather. I do want it to have pockets opposite where the phone sits to hold money, cards, etc.
Anyone seen anything like this?
None? Nobody's seen anything like this?
Honestly bro I looked high and low for a case like this and it just isn't out yet. There's an OEM product called "Samsung d30 t989 leather slip cover" coming out sometime in the next few months that can be found with Google if you search the quoted phrase. The one case I found like what your asking turned out to be an incompetent eBay seller labeling **** for the international gs2 like it would work for ours.
Sent from my SGH-T989
eeeewwwwww.......
i don't like those cases, yes, they have their good uses, but... not my type
i can see many scenario and situation when & where i might want to use one, but it's not worth the cost
just search for something similar, you don't need an exact fit for those type of cases, look for another phone with similar size spec, and find it
any updates on this case?
bump for great justice. i really like the twelve south case
I've been looking at this
http://www.pdair.com/catalog/product_info.php?products_id=34089
just ordered it few days ago waiting for it to show up
---------- Post added at 10:28 AM ---------- Previous post was at 10:26 AM ----------
dont buy for talkietech or wirless age or something like that, they both dicked me around for two weeks and told me not in stock, there is a guy on ebay from hong kong that has stich color options for pd case, but i got the original from the website above
I ordered a "black Napa leather case" off Amazon. Nice quality but so thick it could hold 2 sgs2's and way too wide. Clearly not made for our phone.
http://cdn.shopify.com/s/files/1/0075/8682/t/1/assets/phonefoldgrey-full07.jpg?111878
This case is exactly what I want but it's only for iPhone and the measurements don't match.... our phones are too wide
I've been searching for the same thing. I found this one and I really like it. Although the camera and speaker holes are wrong. Might get it and try it out anyway..
http://novoskins.com/index.php?main_page=product_info&cPath=87_96&products_id=441
I actually might have found it on ebay.
ebay.com/itm/Twelve-South-BookBook-Style-Leather-Case-Wallet-Samsung-Galaxy-S2-/200697112810?
pt=UK_MobilePhones_MobilePhonesCasesPouches&hash=item2eba7ae8ea#ht_571wt_1341
The picture shows an iPhone but the description says it's for a galaxy s2. It's a bit on the pricey end and I'm not sure about the quality since it's not a genuine Twelve South. But they sold 12 of these so far without negative feedback.
EDIT: New link since the other one ended: ebay.com/itm/Twelve-South-BookBook-Style-Leather-Case-Wallet-Samsung-Galaxy-S2-/200706984428?_trksid=p4340.m444&_trkparms=algo%3DCRX%26its%3DC%252BS%26itu%3DSI%252BUA%252BLM%252BLA%26otn%3D5%26ps%3D63%26clkid%3D5992036502526272942#ht_571wt_1348
got the pdair really happy with it, but can only fit two credit cards in each slot, otherwise it looks like sh... i will post pix if you guys want
beauty0fparting said:
I actually might have found it on ebay.
ebay.com/itm/Twelve-South-BookBook-Style-Leather-Case-Wallet-Samsung-Galaxy-S2-/200697112810?
pt=UK_MobilePhones_MobilePhonesCasesPouches&hash=item2eba7ae8ea#ht_571wt_1341
The picture shows an iPhone but the description says it's for a galaxy s2. It's a bit on the pricey end and I'm not sure about the quality since it's not a genuine Twelve South. But they sold 12 of these so far without negative feedback.
Click to expand...
Click to collapse
If you get this please post back here. I'd love one of those. The last pic actually looks like ags2.
beauty0fparting said:
I actually might have found it on ebay.
ebay.com/itm/Twelve-South-BookBook-Style-Leather-Case-Wallet-Samsung-Galaxy-S2-/200697112810?
pt=UK_MobilePhones_MobilePhonesCasesPouches&hash=item2eba7ae8ea#ht_571wt_1341
The picture shows an iPhone but the description says it's for a galaxy s2. It's a bit on the pricey end and I'm not sure about the quality since it's not a genuine Twelve South. But they sold 12 of these so far without negative feedback.
EDIT: New link since the other one ended: ebay.com/itm/Twelve-South-BookBook-Style-Leather-Case-Wallet-Samsung-Galaxy-S2-/200706984428?_trksid=p4340.m444&_trkparms=algo%3DCRX%26its%3DC%252BS%26itu%3DSI%252BUA%252BLM%252BLA%26otn%3D5%26ps%3D63%26clkid%3D5992036502526272942#ht_571wt_1348
Click to expand...
Click to collapse
I guess, given that there's no hole on the back for camera or speakers, it should work just fine. I don't know how much different our phone is from the original GS2.
Still, at $40, I guess I'd like to hear from someone who has my phone and has bought the case.
I emailed the seller and asked for some pics of the actual item. I'm sure it's an i9100, but here ya go. Looks nice none the less. I may pick one up.
I axially bought one of these and I really like it. It doesn't line up with the holes for the touch buttons perfectly, but my x-acto took care of that easily. Seems to be pretty good quality. I've been using it for about a month.
I know I'm joining the Trophy party a little late (I'm getting mine after a friend upgrades to a WP8 device), but I've been browsing the internet and have seen so many interesting cases and other items for the Trophy, but I am wary about buying a case that isn't listed for the Verizon variant.
Are the two versions (Spark and Spark_W) identical physically? Will a Spark case work on the Spark_W?
Also, I've heard rumors that the slightly larger HTC TouchPro 2\Imagio\Evo 4G battery will fit the Trophy. Is this true? (Can one of the aftermarket Anker batteries also fit?)
Thanks.
EDIT: Discovered there is a major difference between the GSM and CDMA Trophy. Volume and power buttons are switched on the devices. Have to make sure that the cases are for the CDMA one if you're on Verizon.
pizzaboy192 said:
I know I'm joining the Trophy party a little late (I'm getting mine after a friend upgrades to a WP8 device), but I've been browsing the internet and have seen so many interesting cases and other items for the Trophy, but I am wary about buying a case that isn't listed for the Verizon variant.
Are the two versions (Spark and Spark_W) identical physically? Will a Spark case work on the Spark_W?
Also, I've heard rumors that the slightly larger HTC TouchPro 2\Imagio\Evo 4G battery will fit the Trophy. Is this true? (Can one of the aftermarket Anker batteries also fit?)
Thanks.
EDIT: Discovered there is a major difference between the GSM and CDMA Trophy. Volume and power buttons are switched on the devices. Have to make sure that the cases are for the CDMA one if you're on Verizon.
Click to expand...
Click to collapse
Wah wah? As far as the case, both devices are physically the same. Every picture I have seen of the two phones shows the volume/camera/power buttons in identical locations. Just looking at the two side-by-side, I'm sure that there is no difference, so any case you buy should fit either (I recommend a Casemate personally.. I have the original version of the Casemate case and it has been awesome.. except for the little stand thingy).
Now, as far as batteries go, I have never observed a difference in the standard battery sizes between my HTC Eris/Trophy/Touch Pro 2, all the batteries fit perfectly, mind that they are of the standard capacity. I recently ordered the "Fosmon 2200mAh Extended Lithium-ion Battery w/ Cover for HTC 7 Trophy T8686" and am going to see if this fits and works well with the SparkW.
The differences between the Spark and SparkW are all in the hardware. I wanted to obtain a Spark for development, but now see no point (as I got an HTC Pro 7 [on Alltel] and you really REALLY have no choice but to downgrade bootloader's with anything but GoldCard method) as the perfect rom already exist for the device.
Are you planning on running Trophy on Verizon, or another carrier with unlocked sim card? This is where we see people go wrong, as most can't get HSPA+ data working with the VZW Trophy and another carrier.
TheXev said:
Wah wah? As far as the case, both devices are physically the same. Every picture I have seen of the two phones shows the volume/camera/power buttons in identical locations. Just looking at the two side-by-side, I'm sure that there is no difference, so any case you buy should fit either (I recommend a Casemate personally.. I have the original version of the Casemate case and it has been awesome.. except for the little stand thingy).
Now, as far as batteries go, I have never observed a difference in the standard battery sizes between my HTC Eris/Trophy/Touch Pro 2, all the batteries fit perfectly, mind that they are of the standard capacity. I recently ordered the "Fosmon 2200mAh Extended Lithium-ion Battery w/ Cover for HTC 7 Trophy T8686" and am going to see if this fits and works well with the SparkW.
The differences between the Spark and SparkW are all in the hardware. I wanted to obtain a Spark for development, but now see no point (as I got an HTC Pro 7 [on Alltel] and you really REALLY have no choice but to downgrade bootloader's with anything but GoldCard method) as the perfect rom already exist for the device.
Are you planning on running Trophy on Verizon, or another carrier with unlocked sim card? This is where we see people go wrong, as most can't get HSPA+ data working with the VZW Trophy and another carrier.
Click to expand...
Click to collapse
I went to the Microsoft Store and typed in HTC Trophy into the search, and it came up with 2 kinds of case. One is listed as HTC Tophy (base) by Incipio, and the other is listed as just HTC Trophy by incipio (That's the brand of case that I purchased)
Looking at them, the volume and power buttons are on opposite sides. I had to go to Verizon's Site to find which layout I needed (I needed the one with the large cutout in the back, not the small cutout for just camera and speaker)
Compare http://www.microsoftstore.com/store...-HTC-Trophy-Base/productID.247343200/vip.true
to http://www.microsoftstore.com/store...e-for-HTC-Trophy/productID.247343500/vip.true
and you'll see what I mean. Headphone and power buttons are switched.
As for what carrier I will be using it on, I do plan on using it on Verizon. I have the grandfatered unlimited data plan and plan to cling to it for as long as possible. This means getting a WP7 device now, and a WP8 device when they are reasonable off contract.
My mother is still using her Touch Pro 2, so I plan to check battery sizes when I am home next to see how much bigger the TP2 battery is compared to the Trophy. I know it's only 200MAH, but that's still something. Plus, an Anker 1700mAH battery is designed to fit without a different battery cover in a TP2, so I would assume it would fit without an extended battery cover on a Trophy. And since my mother needs a new battery on her Touch Pro 2, I might as well get the 2 pack.
pizzaboy192 said:
I went to the Microsoft Store and typed in HTC Trophy into the search, and it came up with 2 kinds of case. One is listed as HTC Tophy (base) by Incipio, and the other is listed as just HTC Trophy by incipio (That's the brand of case that I purchased)
Looking at them, the volume and power buttons are on opposite sides. I had to go to Verizon's Site to find which layout I needed (I needed the one with the large cutout in the back, not the small cutout for just camera and speaker)
Compare http://www.microsoftstore.com/store...-HTC-Trophy-Base/productID.247343200/vip.true
to http://www.microsoftstore.com/store...e-for-HTC-Trophy/productID.247343500/vip.true
and you'll see what I mean. Headphone and power buttons are switched.
As for what carrier I will be using it on, I do plan on using it on Verizon. I have the grandfatered unlimited data plan and plan to cling to it for as long as possible. This means getting a WP7 device now, and a WP8 device when they are reasonable off contract.
My mother is still using her Touch Pro 2, so I plan to check battery sizes when I am home next to see how much bigger the TP2 battery is compared to the Trophy. I know it's only 200MAH, but that's still something. Plus, an Anker 1700mAH battery is designed to fit without a different battery cover in a TP2, so I would assume it would fit without an extended battery cover on a Trophy. And since my mother needs a new battery on her Touch Pro 2, I might as well get the 2 pack.
Click to expand...
Click to collapse
Ah, I see, so it has to do with the stupid pictures on Microsoft's site that has lead to your confusion. Well, those case pics are wrong: Here is a picture/review of the GSM Trophy, and you can see it is very much the same outside, camera included.
I grabbed my Trophy in the last month before the end of unlimited data, so I understand wanting to keep it (I will be looking to buy a WP8 at full price as well). I'd love to try a 1700mAh battery, but I'm pretty sure the original Verizon battery is only rated at 1250mAh-1300mAh, so 1700mAh is a much bigger upgrade then you realize (the phone doesn't get that great of battery life, even with good reception and mild use). I'll be trying out the 2200mAh over-sized battery with replacement backing to see how it works (it was cheap, can't complain), so I'll be interested to hear what your results are with the 1700mAh battery.
TheXev said:
Ah, I see, so it has to do with the stupid pictures on Microsoft's site that has lead to your confusion. Well, those case pics are wrong: Here is a picture/review of the GSM Trophy, and you can see it is very much the same outside, camera included.
I grabbed my Trophy in the last month before the end of unlimited data, so I understand wanting to keep it (I will be looking to buy a WP8 at full price as well). I'd love to try a 1700mAh battery, but I'm pretty sure the original Verizon battery is only rated at 1250mAh-1300mAh, so 1700mAh is a much bigger upgrade then you realize (the phone doesn't get that great of battery life, even with good reception and mild use). I'll be trying out the 2200mAh over-sized battery with replacement backing to see how it works (it was cheap, can't complain), so I'll be interested to hear what your results are with the 1700mAh battery.
Click to expand...
Click to collapse
This is what I"m looking at. http://www.amazon.com/1700mAh-Batte...urpose/dp/B0050MUSLY/ref=cm_cr_pr_product_top
They say that it's a drop in replacement for an Evo 4G\Touch Pro 2\Whatever, and so I would assume that it's like the MugenPower 1800mAh that does the same thing for the Trophy.
I'm planning on buying it when I get the phone, and if it doesn't fit, I have 2 batteries for my mother's Touch Pro 2 to last her until she shears the display off or crushes it with her car again.
EDIT: canceled my order w\ Microsoft before it shipped. Going to look at the cases for a bit longer than 3 minutes and see if I can find out which one is the real one. I'd rather get the one with the small cutouts, but I doubt that is actually for the Trophy. I could buy it and see if it arrives and fits my phone. I'm seriously thinking that it probably is designed for the HTC Radar instead (looks rather similar to my GF's Radar case) and the wrong picture was posted.
(Just checked it against the Radar page on HTC, and the one that is listed as "base" is for the Radar) Going to probably order the other case soon so that I have one before they disappear.
pizzaboy192 said:
This is what I"m looking at. http://www.amazon.com/1700mAh-Batte...urpose/dp/B0050MUSLY/ref=cm_cr_pr_product_top
They say that it's a drop in replacement for an Evo 4G\Touch Pro 2\Whatever, and so I would assume that it's like the MugenPower 1800mAh that does the same thing for the Trophy.
I'm planning on buying it when I get the phone, and if it doesn't fit, I have 2 batteries for my mother's Touch Pro 2 to last her until she shears the display off or crushes it with her car again.
EDIT: canceled my order w\ Microsoft before it shipped. Going to look at the cases for a bit longer than 3 minutes and see if I can find out which one is the real one. I'd rather get the one with the small cutouts, but I doubt that is actually for the Trophy. I could buy it and see if it arrives and fits my phone. I'm seriously thinking that it probably is designed for the HTC Radar instead (looks rather similar to my GF's Radar case) and the wrong picture was posted.
(Just checked it against the Radar page on HTC, and the one that is listed as "base" is for the Radar) Going to probably order the other case soon so that I have one before they disappear.
Click to expand...
Click to collapse
Okay, so I got the 2200 unofficial battery, and it REALLY should only be used on Spark. See, there is one TINY difference in the battery cover, and it is a small clip in the upper right of the phone! On Spark is must be vertically, but on SparkW it is on horizontal! I didn't realize this and forced the cover on and it made a bit of a divot in the phone... since this is my frank-n-Trophy, I'm not considered (but impressed that the new back held up, didn't break.. and even broke the phone's case lol). I'll charge the battery and give it my "at work" torture test tonight.
Now, what I WISH I had seen was this: Official OEM HTC Trophy extended battery. It's rated at 2150mAh (so basically the same)... cost be damned its an official part, and this one is for the Verizon Trophy. Maybe I'll get one of these for my original Trophy.
I am digging the added weight. The phone finally feels as heavy as I wish it had (yeah, I'm a weirdo, I don't like light phones).
TheXev said:
Okay, so I got the 2200 unofficial battery, and it REALLY should only be used on Spark. See, there is one TINY difference in the battery cover, and it is a small clip in the upper right of the phone! On Spark is must be vertically, but on SparkW it is on horizontal! I didn't realize this and forced the cover on and it made a bit of a divot in the phone... since this is my frank-n-Trophy, I'm not considered (but impressed that the new back held up, didn't break.. and even broke the phone's case lol). I'll charge the battery and give it my "at work" torture test tonight.
Now, what I WISH I had seen was this: Official OEM HTC Trophy extended battery. It's rated at 2150mAh (so basically the same)... cost be damned its an official part, and this one is for the Verizon Trophy. Maybe I'll get one of these for my original Trophy.
I am digging the added weight. The phone finally feels as heavy as I wish it had (yeah, I'm a weirdo, I don't like light phones).
Click to expand...
Click to collapse
Care to post a picture of the two backs side-by-side so I can see what you mean about the cilp?
Let me know how the extended battery performs. I know where to get just the official back for the extended battery pretty cheap (I hope) and may get the pair to try and save some money. Unless the Spark back still works fine.
And what do you mean by "frank-n-trophy"? Storage upgrade mod?