Develop Bugs

[SCRIPT] [SHELL] [NS4G] remCPU - Really easy to manage CPU controller

remCPU
Here is a script that I have been using to manage my cpu and device specific bits. Here is what it can currently control. Usage is pretty simple.
Code:
sh-3.2# /system/bin/remCPU --help
Lithid's remCPU Controller
Help:
--set:
Look at cpu settings config.
--stat:
Look at cpu freq stats.
--config:
Setup the configuration of your cpu.
--help:
Get help.
Contact: [email protected]
Code:
sh-3.2# /system/bin/remCPU --stat
Cpu freq stats:
1400000 0
1200000 4127
1100000 37
1000000 107
800000 346
400000 897
200000 537
100000 88226
Code:
sh-3.2# /system/bin/remCPU --set
Verified:
>>>
Your current governor is: ondemandx
Your max cpu frequency is: 1200000
Your min cpu frequency is: 100000
Your min memory free config is: 3674,4969,6264,8312,9607,11444
Your tcp buffer w/r is: 110592/110592
Backlight noti: 1
Backlight noti blink: 1
Backlight noti blink interval: 750
Backlight noti blink max count: 30
>>>
You run the script, check out your current settings then go through the settings to set it up. It will create a config in /data/data/com.lithid/kernelscript/config. This config will be pulled into effect during the next and everyother reboot, or by running sh /system/etc/init.d/89remCPU after your config is in place. Like I said, set it and forget it! No app running, no space taken up. Just what you want without the extra!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
-Cpu governors.
-Max Cpu frequency
-Min Cpu frequency
-BLN interface
- - Turn on/off
- - Enable blink
- - Modify blink interval
- - Max blink duration
- Low mem free settings
- TCP Buffer read/write
Something as simple as setting and forgetting is what I like. I will be adding in more and more tweaks to the system, checking for features per kernel etc etc.
You should know what the kernel can and can't do before you attempt to mess with the settings.
>> Download Here <<
Issues? Let me know.​

This is for some changelogs.

Wow! This is almost exactly what I was hoping for! Lithid, will it be possible to add a screen off profile going forward? Thank you. Going to flash now!
Sent from my Nexus S 4G using xda premium

JohnCorleone said:
Wow! This is almost exactly what I was hoping for! Lithid, will it be possible to add a screen off profile going forward? Thank you. Going to flash now!
Sent from my Nexus S 4G using xda premium
Click to expand...
Click to collapse
That's something I'm looking into. Tho that would create the need for a constant while loop checking for changes to the sleep state. While it would not be difficult, I don't think its 100% needed. I will tho look into a good way to implement tho. Thanks!
Sent from my Nexus S 4G using xda premium

One more question for you. Would I be able to run this and only use SetCPU for that screen off profile or would it override the script? If it ruins the script, I may try ditching the screen off profile for a while
Sent from my Nexus S 4G using xda premium

JohnCorleone said:
One more question for you. Would I be able to run this and only use SetCPU for that screen off profile or would it override the script? If it ruins the script, I may try ditching the screen off profile for a while
Sent from my Nexus S 4G using xda premium
Click to expand...
Click to collapse
Shouldn't do anything. I don't use anything else but this. My phone lasts over 24 hours with regular use. So never needed it. Plus that's what deep sleep on our phones is for lol.
Sent from my Nexus S 4G using xda premium

lithid-cm said:
Shouldn't do anything. I don't use anything else but this. My phone lasts over 24 hours with regular use. So never needed it. Plus that's what deep sleep on our phones is for lol.
Sent from my Nexus S 4G using xda premium
Click to expand...
Click to collapse
I am going to set it up without the screen off profile. Thanks again.
Edit..working great here!
Sent from my Nexus S 4G using xda premium

Any love for bld?
†††

FL0OD said:
Any love for bld?
†††
Click to expand...
Click to collapse
BLD, voodoo sound, touchwake, deep sleep support is all on the way. Just trying to get it all out there.

Welcome back to Android lithid. I thought you were taking your talents to the iPhone scene?
Sent from my Nexus S 4G using xda premium

EVO-lution of Man said:
Welcome back to Android lithid. I thought you were taking your talents to the iPhone scene?
Sent from my Nexus S 4G using xda premium
Click to expand...
Click to collapse
I have been back on android for some time now. I was using windows phone as well.
and thanks!

Are there any Kernel requirements/recommendations? (other than init.d support) Also Busybox Ver? req
Thanks for this should come in handy!

LucKyPunk said:
Are there any Kernel requirements/recommendations? (other than init.d support) Also Busybox Ver? req
Thanks for this should come in handy!
Click to expand...
Click to collapse
Its using just basic sh shell so unless your running froyo there should not be issues.
In terms of kernels I am using air. But you should know what your kernel can do. I'm writing checks so it will only display options available to you.
Sent from my Nexus S 4G using xda premium

Hmmmm. Will keep my eyes on this....I like the idea of not needing to have two apps(setcpu and bln control) taking up space when I never go into them unless I flash a new kernel. Will there be a way to set governor settings? meaning like on demand parameters for up threshold and such
Sent from my Nexus S 4G using Xparent Red Tapatalk

brianbgrp said:
Hmmmm. Will keep my eyes on this....I like the idea of not needing to have two apps(setcpu and bln control) taking up space when I never go into them unless I flash a new kernel. Will there be a way to set governor settings? meaning like on demand parameters for up threshold and such
Sent from my Nexus S 4G using Xparent Red Tapatalk
Click to expand...
Click to collapse
Maybe in the future. Just don't like the idea of something always running. I will be looking into it tho.
Sent from my Nexus S 4G using xda premium

Welcome back lithid-cm,
Thanks for the script, looking forward to your updates.
Sent from my Nexus S 4G using XDA

interested in this...

cyburke said:
interested in this...
Click to expand...
Click to collapse
It works well actually. I am glad you bumped it. I needed to download it again since I formatted memory
Sent from either ET4G or NS4G using Xparent Tapatalk 2

Wow this looks awesome.

Air kernel by r_data for Galaxy Nexus released!

r_data's air kernel released for galaxy nexus gsm!
here's a link
REMOVED

features on v1.0
Features :
- Based on android-omap-tuna-3.0-ics-mr1 (Linux Kernel 3.0.8) (Tested IMM76I 4.0.4)
- Governor : Interactive, Wheatley, Ondemand, Hotplug, Conservative, Performance, Userspace
- Scheduler : Simple I/O, Deadline, Noop, Cfq,
- Overclockable to 1.5Ghz
- Under Voltage !!
- GPU OverClock Control (Thanks to Imoseyon)
: 307Mhz, 384Mhz, 512Mhz
- Touch Wake // Ezekeel's Mods !! (Thanks to Ezekeel)
- Vibrate Control
- Sound Control
- Color Control
- Temp Control
- WiFi Power Mode Control //
- USB Fast Charge Support (Thanks to Chad0989)
- USB OTG Support
- SLUB Memory Allocator, Tiny RCU
- Lowmemorykiller backport from Linux kernel v3.4-rc1
- Optimized CRC32 Algorithm
- ARM RWSEM Algorithm
- TUN Support (Built-in)
- More Performance TWEAKS !!
- Great Battery Life !!
- Etc ...
Thanks to Ezekeel, imoseyon, franciscofranco, faux123, ch33kybutt !!!

Woah this is awesome.
The air kernel was amazing on the Nexus S. I'm definitely gonna give this one a try.

The stock kernel has tun support built in. Never seen someone mention it as a feature of a custom kernel

Can you make it a clickable link for tapatalk please.
Sent from my Galaxy Nexus using Tapatalk 2

Droid316 said:
Can you make it a clickable link for tapatalk please.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Im using the same app. The way I opened it was by clicking "quote" on his post then just copying the URL and paste in you're browser.

Interested on user reports of this kernel on Stock ROM.

Air kernel is one of the best kernel on Nexus S, glad to see it comes to Galaxy Nexus

Its a little laggy at first but then it all works =] ahhhh love and missed his kernel
- Google

iGoogleNexus said:
Its a little laggy at first but then it all works =] ahhhh love and missed his kernel
- Google
Click to expand...
Click to collapse
Are you on stock ROM? What are the main benefits of this kernel over stock. I don't know all the specs on the stock kernel to compare.

Sorry my bad
I'm stock completely (Takju)
It runs smooth on my at Max 1200 and 700 Min
I set it to 1500 Max and started lagging like crazy...
Anything is better than Stock Kernel
- Google

What app is everyone using to control the kernel? Does he have his own app like Franco or Trinity?
Sent from my Galaxy Nexus using xda premium

nory82688 said:
What app is everyone using to control the kernel? Does he have his own app like Franco or Trinity?
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
not yet. but he said has a plan to release the app
his blog to download
http://airkernel.blogspot.com/2012/05/ics-air-kernel-v10-for-gnex-gsm.html
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

any feedback guys?
i dont see any new toppic about that kernel on XDA or so. Anybody had his twitter?

castaway1 said:
any feedback guys?
i dont see any new toppic about that kernel on XDA or so. Anybody had his twitter?
Click to expand...
Click to collapse
r_data's twitter
http://twitter.com/ko_ma

daskalos.healing said:
r_data's twitter
http://twitter.com/ko_ma
Click to expand...
Click to collapse
thenks! he will fix some bugs and upload it to xda

14-MAY-2012 out!
http://airkernel.blogspot.com/2012/05/ics-air-kernel-v10-for-gnex-gsm.html
click [Download Link !!] on that post
Edit : Kernel Settings Script (/system/etc/98airtweaks) with English footnotes
edit with Notepad++ on your needs and flash in recovery
(quotation from GLaDOS Control app and GLaDOS thread)
when switching to the other kernel, delete that file

Any chance of this working, or having a desperate kernel for CDMA?
Sent from my Galaxy Nexus using xda premium

Wow, new kernel with various Ezekeel's MOD
But, Air_Kernel_v1.0_GN-05142012 boot loops issue! hope fixed in the next release

reference.phone said:
Wow, new kernel with various Ezekeel's MOD
But, Air_Kernel_v1.0_GN-05142012 boot loops issue! hope fixed in the next release
Click to expand...
Click to collapse
I will fix bugs and, upload it in development.
Sent from my Galaxy Nexus using xda app

Battery Saver Script - 6.30.12

Greetings all!
I have modified Calkulin's Battery Saver Script to work with our GNex devices. I updated the undervolt init.d script to work on both CPUs and tweaked the voltages based off Apex's voltage table. If you are setting cpu setting on boot via control app (ie: Glados, Franco, performance settings) please disable since the conflicting scripts will cause issues. The default governor and other settings can be modified by manually changing values within the scripts.
Prerequisites:
A kernel with init.d support
-default CM9 kernel doesn't work (still looking for a fix)
Flashing Instructions:
1. Reboot into recovery and make Nandroid backup
2. Flash attached zip file just like you would a rom.
3. Reboot and enjoy.
REMOVED FOR STABILITY/COMPATIBILITY
Undervolt Steps are based on # of CPU frequencies available:
Code:
STEPS_10="1475 1375 1325 1275 1225 1175 1050 975 850"
STEPS_9="1425 1375 1325 1275 1225 1175 1050 975 850"
STEPS_8="1375 1325 1275 1225 1175 1050 975 850"
STEPS_7="1325 1275 1225 1175 1050 975 850"
STEPS_6="1275 1225 1175 1050 975 850"
STEPS_5="1225 1175 1050 975 850"
CPU profiles:
Code:
BATTERY_PROFILE_1: From 100% - 85% battery level
MAX_CPU_SPEED="1200000"
MIN_CPU_SPEED="0"
BATTERY_PROFILE_2: From 84% - 0% battery level
MAX_CPU_SPEED="1000000"
MIN_CPU_SPEED="0"
AWAKE_GOVERNOR_ON: Changes to this initially after screen turns on
AWAKE_GOVERNOR="interactive"
AWAKE_MAX_CPU_SPEED=max profile speed
AWAKE_MIN_CPU_SPEED=max profile speed
AWAKE_DURATION="5"
SLEEP_GOVERNOR_ON: Changes to this once screen turns off if no SCREENOFFMAX file is found
SLEEP_GOVERNOR="conservative"
SLEEP_MAX_CPU_SPEED="800000"
SLEEP_MIN_CPU_SPEED="0"
The script at work.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CREDITS:
98% of the credit goes to Calkulin -
bigxie for posting the voltage table
ME

I'll most def be giving this a shot.
D
Sent from my Sprint Galaxy Nexus CDMA using xda premium

installing
so i just flash threw recovery right? if i make a nandroid back up will it remove it if it makes my phone go crazy?

justro said:
so i just flash threw recovery right? if i make a nandroid back up will it remove it if it makes my phone go crazy?
Click to expand...
Click to collapse
yes
Sent From My Sprint Galaxy Nexus via XDA Premium

do I need to install anything else besides this .zip?
script manager?
setCPU??
anything?

Just installed combined with samurai kernal and let me say its pretty damn cool
Sent from my Sprint Galaxy Nexus CDMA using xda premium

broad_st_bully said:
do I need to install anything else besides this .zip?
script manager?
setCPU??
anything?
Click to expand...
Click to collapse
No, the script looks for those programs and deactivates itself. You should only run this script for cpu scaling.
Sent from my Sprint Galaxy Nexus CDMA using Tapatalk 2

justro said:
Just installed combined with samurai kernal and let me say its pretty damn cool
Sent from my Sprint Galaxy Nexus CDMA using xda premium
Click to expand...
Click to collapse
I just installed this combo. I'm using stock rom though. How's your bat life been?
Also are there any setting/options, I havent found any going through settings.

Is there a way to easily remove the script... another zip to flash perhaps? Or is a nandroid restore the only way?
In any case, thanks OP this looks good :thumbup:
Sent using Tapatalk 2

jten9 said:
Is there a way to easily remove the script... another zip to flash perhaps? Or is a nandroid restore the only way?
In any case, thanks OP this looks good :thumbup:
Sent using Tapatalk 2
Click to expand...
Click to collapse
You should be able to just delete the script from the init.d directory.

So far day one test and I'm loving the results so far
Sent from my Sprint Galaxy Nexus CDMA using xda premium

justro said:
So far day one test and I'm loving the results so far
Sent from my Sprint Galaxy Nexus CDMA using xda premium
Click to expand...
Click to collapse
Thanks looks about right to me.
Sent from my Sprint Galaxy Nexus CDMA using Tapatalk 2

Bradart said:
You should be able to just delete the script from the init.d directory.
Click to expand...
Click to collapse
Thanks, easy enough!
Another noob question- what is an easy way to verify that the script is running? I think its possible to check with Script Manager (smanager), can anyone point me to directions? I didn't come up with much from searching...
If it matters, I'm running Franco m3 and stock rom
Sent using Tapatalk 2

justro said:
So far day one test and I'm loving the results so far
Sent from my Sprint Galaxy Nexus CDMA using xda premium
Click to expand...
Click to collapse
What's your screen on time?
Sent from my Sprint Galaxy Nexus CDMA using Tapatalk 2

This is what I've got today. Much improved compared to the same usage before I was getting approx 6-7hrs if I was lucky.

will this work with stock rom + kernal

raisinbagel said:
will this work with stock rom + kernal
Click to expand...
Click to collapse
No, you must have a kernel with init.d support.
Sent from my Sprint Galaxy Nexus CDMA using Tapatalk 2

raisinbagel said:
will this work with stock rom + kernal
Click to expand...
Click to collapse
Sent From My Sprint Galaxy Nexus via XDA Premium

What kernel are you using?
Also with this work with franco and or samurai ? i keep switching back and forth not sure what one is better with black ice rom

cheddaface said:
What kernel are you using?
Also with this work with franco and or samurai ? i keep switching back and forth not sure what one is better with black ice rom
Click to expand...
Click to collapse
It causes reboots on Franco milestone 3
Sent from my Galaxy Nexus using xda premium

|KERNEL| SaberN3Kernel_10.7 || 3.4.75 || OC for all || exFAT | 12/23

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SaberN3Kernel ​This Kernel Is Compatible with all TW/Samsung based JB ROMS for this device--- (Not AOSP)​
READ, READ, READ before downloading, flashing, or posting questions
Not all phones are created equal meaning some phones will not handle Overclocking / Underclocking or Undervolting as well as others.
So far this is tested and working on:
(SD 800 Processor N3 Only!!)
SM-N900T
SM-N9005
SM-N900W8​
Features
OC to 2.649GHz
UC to 266MHz
Kernel Version 3.4.75
UV Support to 700
Advanced Power Emulation
Default Scheduler= Row
Default Governor= Ondemand
Default boot set to 2..3Ghz (2.2656)
Built using arm 4.7 toolchain
Touchwake
CPU Boost Driver
Init.d
Ramdisk Mods
- Temporary patch solution for wifi, forcing change in build.prop (Jovy23)
- SELinux= Permissive
- Insecure (Remount not yet online)
Exfat Supported
Added Schedulers:
-FIOPS
-ZEN
-SIO
Edits to DEADLINE for better performance
Added Gov:
-Wheatley
USB FastCharge (USB Charges at AC level)
Faux's Overall Stats for quad core devices (This will show overall CPU frequency statistics via sysfs.)
Faux's CPU Freq Limiter (This driver limits MSM CPU frequency through sysfs file system)
More...
Github
In my GITHUB you can find my sources and code changes
Credits
Samsung for Official Source Code
Xiaolu
Faux123
DoomLord
danieljamie
dormanx
Jovy23
markbencze
livlogik
Imoseyon
Yank555!
Instructions
TWRP Recovery HIGHLY Recommended!
-Download Kernel
-Flash Kernel
-Boot system and DO NOT TOUCH FOR 2-3 MIN
Changelog
Code:
12|23--10.7
There have been many Jedi Elite exclusive versions of Saber so this is a catch up Changelog
-Upgraded to to 3.4.75!
-Touch Wake Implementation Thanks to Yank555!! (will drain battery faster)
-CPU boost driver thanks to Yank555 and Saravana Kannan
-Voltage Modifications
-Removed ifdefs. Unified kernel now
-Edits to Defconfigs
-Dropped bottom freq to 266mhz
-Voltage mods for STABILITY ;)
-Thermal edits
-Edits to Defconfigs
10|25-- 5.2
Patched All the way up to 3.4.67!! (Imoseyon responsible for patches from 3.4.6-3.4.66)
Cores should now all behave as instructed
ALOOTT of voltage work, we can now ALL Run with a RED Saber!!!
Thermal edits
Edits to Defconfigs
Ramdisk edits to improve USB connection Recognition
10|16-- 3.0
3 different kernel choices
-Green = No OC + All Features
-Yellow = OC to 2.5 + All Features
-Red= OC to 2.7 + All Features
Added Schedulers:
-FIOPS
-ZEN
-SIO
Edits to DEADLINE for better performance
Added Gov:
-Wheatley
USB FastCharge (USB Charges at AC level)
Faux's Overall Stats for quad core devices (This will show overall CPU frequency statistics via sysfs.)
Faux's CPU Freq Limiter (This driver limits MSM CPU frequency through sysfs file system)
10|15-- 2.3
-Dropped UV limit
-Work with cpu
10|15-- Initial Release (See Features List)
Downloads
READ BEFORE DOWNLOADING
SaberN3Kernel_Red-10.7
http://d-h.st/znG
Support this Development By clicking this Button,,, Thank you
http://forum.xda-developers.com/donatetome.php?u=4488450
Guide to Thread Participation":
Generally speaking, we are a pretty calm group of people, but as with so many other things in life, there are those that evoke a negative response from the very start. THAT is why we are such believers in maintaining a polite, respectful thread. Most everyone here is eager to help, and the only thing we ask is (despite the associated tedium) read the entire thread, it can only help. If and when you are still stuck, feel free to ask questions, we're all here to help one another.
--TMobTim
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------​
XDA:DevDB Information
|KERNEL| SaberN3Kernel_10.7 || 3.4.75 || OC for all || exFAT | 12|23, a Kernel for the T-Mobile Samsung Galaxy Note 3
Contributors
ptmr3
Kernel Special Features:
Version Information
Status: Stable
Created 2013-10-15
Last Updated 2013-12-23

mine

Great work as always bro. Killing it already!
Sent from my SM-N900W8 using Tapatalk now Free

Very nice work done, looking forward to using this when I get my note 3.
Sent from my note 2 ya bish!

You are the man, again!
Sent from my SM-N900T using Tapatalk now Free

Downloading now!!! Thank you for your hard work and support of the Note 3 :thumbup:
Sent from my SM-N900T using XDA Premium 4 mobile app

Thanks for for the Beast, banging on it right now:good:

Woot!
Sent from my SM-N900T using Tapatalk

Nice downloading now. Thanks once again ptmr3
Sent from my SM-N900T using Tapatalk

Installed fine with darthstaker rom wifi seems to be working great as well. Thanks for the kernel. Looking forward to a rom son too hopefully .
Edit: it seems that using an app like trickster mod to put the max cpu at say 1.3ghz only caps cpu 1. Cpu2,3,4 still go to 2.5ghz. Anyone else have this problem?
Sent from my SM-N900T using Tapatalk

For uv do we need trickster mod, or should setcpu work?
Sent from my SM-N900T using Tapatalk

Nice to see you around ptmr3. Been looking forward to seeing you post in here.
Sent from my SM-N900T using XDA Premium 4 mobile app

Admiral2145 said:
For uv do we need trickster mod, or should setcpu work?
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
Trickster will flash right in along with the kernel. One of the best apps for kernel control available IMO

Admiral2145 said:
For uv do we need trickster mod, or should setcpu work?
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
I usually try to stick with what the Dev uses, in this case I'm fairly certain it's Trickster, but to each his own.. Let us know either way you go what kind of results you're getting.. :thumbup:
Sent from my SM-N900T using XDA Premium 4 mobile app

This one will not go lower than 800 on voltages. Have a more aggressive kernel testing now
Sent from my SM-N900T using xda app-developers app

ptmr3 said:
This one will not go lower than 800 on voltages. Have a more aggressive kernel testing now
Sent from my SM-N900T using xda app-developers app
Click to expand...
Click to collapse
so i assume we need to wipe cache and dalvik correct? thats what i always did for kernels.

So much smoother, the responsiveness is better, not just blowing smoke. My floating toucher app is actually working flawlessly now, it would be unresponsive to my first touch half the time, now no issues .. I'm pretty happy already and I haven't done any tweaking.. So happy you're working on this device
Sent from my SM-N900T using XDA Premium 4 mobile app

XxLostSoulxX said:
so i assume we need to wipe cache and dalvik correct? thats what i always did for kernels.
Click to expand...
Click to collapse
Not necessary but you can if you want
Sent from my SM-N900T using xda app-developers app

ptmr3 said:
This one will not go lower than 800 on voltages. Have a more aggressive kernel testing now
Sent from my SM-N900T using xda app-developers app
Click to expand...
Click to collapse
When i load up tickster it shows everything from 576mhz and lower at 775. This is the default that loads for me? is it going to that or is it only really at 800.

Prod1702 said:
When i load up tickster it shows everything from 576mhz and lower at 775. This is the default that loads for me? is it going to that or is it only really at 800.
Click to expand...
Click to collapse
It is that low, but if you go to change them, they will default to 800. I will have a fresh one up in maybe an hour
Sent from my SM-N900T using xda app-developers app

[KERNEL] Furnace-1.3.6 for Nexus 5 [AOSP/CAF][6/30/2014][RGB][BiDi-S2W][S2D][GCB]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I will update this as long as I have time, introducing new features and fixes for any issues that may arise.
If you have any feature requests or ideas that haven't been seen before, don't hesitate to throw it out there, I love new things!
If you're concerned about benchmarks, go here.
Features:
Code:
Linux Kernel 3.4.95
LZ4 Compressed Kernel/Ramdisk
LG Thermal Control
Fast Charge
IntelliPlug
Bidirectional Sweep2Wake
Bidirectional Sweep2Sleep
[url=http://forum.xda-developers.com/showpost.php?p=53601815&postcount=368]Sweep2Dim[/url]
DoubleTap2Wake (User configured tap radius)
Samsung's exFat module support
Enabled extra TCP cong. controllers
LG G2's latest PM driver (replaces lpm)
Shared Memory driver (smem)
Xbox Controller support enabled
Kexec-Hardboot support
F2FS Support
Gamma Control
Full RGB Color Control
(RGB/Gamma) Startup Config
[url=http://forum.xda-developers.com/showpost.php?p=52940349&postcount=2]Gamma Corrected Brightness[/url]
Sound Control
Wheatley CPU Gov
Intellidemand CPU Gov
Intelliactive CPU Gov
OndemandPlus CPU Gov
SIO/BFQ/FIOPS/ZEN/VR IO Schedulers
Dynamic fsync
frandom
Powersuspend
Overclock to 2.7Ghz
Underclock to 96Mhz
Voltage Control
Thanks to:
Code:
Lithid
flar2
franciscofranco
faux123
showp1984
yorici
Piereligio
The Gingerbread Man
vomer
Code:
Both overclock-enabled and stock-clock (2265Mhz) builds are available below.
Want some F2FS(-ALL) support? Check out this thread maintained by @kdh2834
Click to expand...
Click to collapse
Download:
Furnace Kernel / source / changelog / mirror
Boot Image Unpacking/Repacking:
If there's anything you want to utilize within the boot.img, (ramdisk for example) here's a quick guide on unpacking boot.img
You will need to get a hold of the latest unpackbootimg/mkbootimg, I recommend CM11 source.
Boot partition is located in /dev/block/platform/msm_sdcc.1/by-name/boot
To unpack:
Code:
mkdir output
./unpackbootimg -i boot.img -o output
To repack:
Code:
./mkbootimg --kernel output/boot.img-zImage-dtb --ramdisk output/boot.img-ramdisk.gz --cmdline "console=ttyHSL0,115200,n8 androidboot.hardware=hammerhead user_debug=31 maxcpus=4 msm_watchdog_v2.enable=1" --base 0x00000000 --pagesize 2048 --ramdisk_offset 0x02900000 --tags_offset 0x02700000 -o new_boot.img
(OLD: Furnace-1.1.0 and below) Strict Mode:
Trickster Mod does not support this module parameter yet, so here's some sysfs!
-Make sure MPDecision is disabled and IntelliPlug is enabled
-Make sure Eco Mode is not enabled
Code:
echo "1/0" > /sys/module/intelli_plug/parameters/strict_mode_active
Sweep2Wake/Sleep
Yes many apps support this but here's some more info on it and sysfs.
Code:
echo "2/1/0" > /sys/android_touch/sweep2wake
Code:
echo "1/0" > /sys/android_touch/doubletap2wake
Selecting "2" for Sweep2Wake will limit the feature to S2S only, to use, swipe from the left or the right of the navbar to the alternate side.
Selecting "1" will enable both S2W and S2W, to turn on your display, swipe from the left or right of the screen to the alternate side.
DoubleTap2Wake Feather Radius
You will be able to control the allowed distance between tap #1 and tap #2. This will help with unintentional wakes quite a bit.
Code:
echo "3/2/1" > /sys/android_touch/doubletap2wake_feather
Value 1 is the stock radius, 2 is a tighter radius, and 3 is a very tight radius (which I found quite nice).
Diag Mode enable:
Code:
setprop sys.usb.config diag,adb
Disable:
Code:
setprop sys.usb.config mtp,adb
Want to customize? Use this.
If you pick your kernel based on buzzwords then this has all that crap I guess.​

WOO HOO!!! Good job dude!!

I'm gonna try this with Codefire X
Thanks for the hard work
Sent from my AOSP on HammerHead using XDA Premium 4 mobile app

installed this kernel, battery life increase noticed by me
Sent from my Nexus 5 using XDA Premium 4 mobile app

Jashanmallan said:
installed this kernel, battery life increase noticed by me
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
That was fast.
Sent from my LG-LS980 using XDA Premium 4 mobile app

Jashanmallan said:
installed this kernel, battery life increase noticed by me
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Really... 42 minutes and you're already saying battery increase. Come on now...
Sent from my Nexus 5 using Tapatalk

Oh man. This is gonna be a great kernel. Like this dev
Sent from my Nexus 5 using XDA Premium 4 mobile app

This looks like a smoking kernel! Sweet!!

This works great on latest P.A.I do notice my phone feels a little more snappy.I say that based on reopening apps on as well as scrolling.Thank you for sharing.

Sounds awesome. Flashing it now

0dBu said:
Really... 42 minutes and you're already saying battery increase. Come on now...
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
brother I got 30min Sot with 5 percent and that's really good for me..
Sent from my Nexus 5 using XDA Premium 4 mobile app

Jashanmallan said:
brother I got 30min Sot with 5 percent and that's really good for me..
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
For optimal results, take 2 of these and report back in about a week

Jashanmallan said:
brother I got 30min Sot with 5 percent and that's really good for me..
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It depends what you're doing in that 30 minutes. 30 minutes of playing GTA San Andreas and 30 minutes of reading is quite different.
Sent from my Google/LGE Nexus 5 (Hammerhead) using XDA Premium 4

Jashanmallan said:
installed this kernel, battery life increase noticed by me
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse

Going to give this a go and see how it compares to franco
---------- Post added at 10:43 AM ---------- Previous post was at 09:46 AM ----------
daleski75 said:
Going to give this a go and see how it compares to franco
Click to expand...
Click to collapse
Quick antuntu x benchmark and franco gets around 24k and this kernel gets around 28k

daleski75 said:
Going to give this a go and see how it compares to franco
---------- Post added at 10:43 AM ---------- Previous post was at 09:46 AM ----------
Quick antuntu x benchmark and franco gets around 24k and this kernel gets around 28k
Click to expand...
Click to collapse
Are you using F2FS?
Anyway "This kernel is available for AOSP ROMs only, ROMs that use CAF are not supported at this time.." No idea wad is CAF? But is stock rom considered as AOSP roms? Isn't AOKP or CM considered as well?

tanjiajun_34 said:
Are you using F2FS?
Anyway "This kernel is available for AOSP ROMs only, ROMs that use CAF are not supported at this time.." No idea wad is CAF? But is stock rom considered as AOSP roms? Isn't AOKP or CM considered as well?
Click to expand...
Click to collapse
Don't use with CM. It'll work fine on stock/pa/omni/etc.
Sent from my Moto G using XDA Premium 4 mobile app

Savoca said:
Don't use with CM. It'll work fine on stock/pa/omni/etc.
Sent from my Moto G using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Okay thanks a lot man!

tanjiajun_34 said:
Are you using F2FS?
Anyway "This kernel is available for AOSP ROMs only, ROMs that use CAF are not supported at this time.." No idea wad is CAF? But is stock rom considered as AOSP roms? Isn't AOKP or CM considered as well?
Click to expand...
Click to collapse
Not using F2FS at all.

Is there something wrong with F2FS support? When I use other kernel (This I tried http://d-h.st/6w5), it manages to boot up. But when I use this kernel, when booting up, it gives me the screen "Type password to decrypt storage"...