I don't know which is the current script that my wildfire is using, but I've read a lot about the V6 script.
How does it affects the phone's performance?
And is it compatible with Wildfire[Rooted, @710 MHz with cm 7.2.0]?
And what about V8?
Can you give me the link for the tutorial to install V6(or V8) script on Wildfire?
Thanks!
:good:
Related
Hi, can anyone tell me how to adapt ownhere's newest data2ext script (8.8) to leedroid ROM? Or to any other ROM in general? I mean the script where you need 2 ext partitions and a 100mb swap one. I would really like that on leedroid, but no idea how to port the script
Anyone?
Hey guys,sorry if it's written somewhere else,but I haven't found it,so I want to ask if in JokerDROID I can change overcklock settings,or in case if I can change nFinity kernel with HCDR Kernel without compatibility problems.
You can use SetCPU, an app to overclock / underclock. It can be found here somewhere at XDA, Just search.
JokersDroid already includes the nFinity kernel, which supports OC.
Ok,got it,thanks for the answer!
hi can anyone tell me wheter if i installed the bionic cow 2 rom ,do i still need to install the v6 supercharger or is it already in the rom.thanks
The ROM itself has already been optimized. Of course, u still can use V6 for more aggressive supercharging.
I read the thread and some reported that if you apply v6 supercharge, you may experience FC or slowness. The ROM and fully optimized and fast. You don't need v6 supercharge for it.
You dont need it... The rom is fast enough as is
Bionic V2 + SuperCharger
Not needed but if you do a slight speed improvement will be experienced...Go for option no.7.and Nitro etc.
Vroom2.....Have personally tested on CWG's 4th ROM.... on 1.6GHz...OD...n playin' TempleRun...Nice !
Sent from my GT-I8150 using xda premium
Xperia Arc LT15i(anzu)
Kernel: LuPuSv9 OC @ 1.6GHz bfq governor
ROM:Ultimate HD Rom 2.0.3
Mods: Ultimate HD Mod 2.4, v6 supercharged[MFK+Die-Hard Launcher+NLN], Seeder Entropy Generator
Score: 5767
My RAM is still low even though I debloatwared it thoroughly.
Unless I installed UHD 3.0 or flashed .13 base firmware.
[Q]===I want to install either a CM10 based or a .13 firmware or more mods to improve performance. Any recommendations?
Only that I don't want the UI of CM10, and I can't find a stable kernel for the .13 firmware
Credits to: wedgess, zeppelinrox, eaglebooy, jader13254, lambgx02
zgmfx20 said:
Xperia Arc LT15i(anzu)
Kernel: LuPuSv9 OC @ 1.6GHz bfq governor
ROM:Ultimate HD Rom 2.0.3
Mods: Ultimate HD Mod 2.4, v6 supercharged[MFK+Die-Hard Launcher+NLN], Seeder Entropy Generator
Score: 5767
My RAM is still low even though I debloatwared it thoroughly.
Unless I installed UHD 3.0 or flashed .13 base firmware.
[Q]===I want to install either a CM10 based or a .13 firmware or more mods to improve performance. Any recommendations?
Only that I don't want the UI of CM10, and I can't find a stable kernel for the .13 firmware
Click to expand...
Click to collapse
I recommend RacingBean v2.2 !! I used it for daily use and this is the fastest ROM for me. It has Xperia Z launcher and walkman)
I recommend you browse the forum and decide yourself.
XperienceD said:
I recommend you browse the forum and decide yourself.
Click to expand...
Click to collapse
Yes !
HeadFox said:
I recommend RacingBean v2.2 !! I used it for daily use and this is the fastest ROM for me. It has Xperia Z launcher and walkman)
Click to expand...
Click to collapse
Thank you! Hit it.
XperienceD said:
I recommend you browse the forum and decide yourself.
Click to expand...
Click to collapse
I asked for recommendations cause I myself can't decide.
zgmfx20 said:
I asked for recommendations cause I myself can't decide.
Click to expand...
Click to collapse
Stick with a stock ROM then, probably best for users like you.
Personal choice, personal taste. This was discussed zillions of times.
Thread closed.
Hello people , I rooted my desire 2.3.3 official with Superuser , but when I have opened No frills cpu , minimum cpu what can I select was 128 mhz and maximum 980 mhz ...I mean there must be a 1190 mhz but its missing , please help
What did u use to root? HTC Desire?
Maximum MHz is 1113..
Try installing Rom Toolbox and check there.
It's probably your kernel. There's CronMod kernel for Gingerbread, try that. Using it w/ CyanogenMod 7.2 and I get 1220MHz Overclock.
Some kernels doesn't allow overclock at all ( Like sense ones ).
Edit:
CronMod ( Rom w/ Kernel )
Download it below in main post. ( Under CronMod Kernel )
Don't flash it on Sense rom. If you want your Sense roms, then take a look at Development section and flash a sense rom.
They are most likely to be better than official roms, because of features like A2SD or INT2EXT and extended overclocking capabilities.
SaySayonara said:
What did u use to root? HTC Desire?
Maximum MHz is 1113..
Try installing Rom Toolbox and check there.
Click to expand...
Click to collapse
Hello ive used Revolutionary ..Did you mean , when I change Rom overclock will work?
EvilShadeZ said:
It's probably your kernel. There's CronMod kernel for Gingerbread, try that. Using it w/ CyanogenMod 7.2 and I get 1220MHz Overclock.
Some kernels doesn't allow overclock at all ( Like sense ones ).
Edit:
CronMod ( Rom w/ Kernel )
Download it below in main post. ( Under CronMod Kernel )
Don't flash it on Sense rom. If you want your Sense roms, then take a look at Development section and flash a sense rom.
They are most likely to be better than official roms, because of features like A2SD or INT2EXT and extended overclocking capabilities.
Click to expand...
Click to collapse
Maximum 998 , minimum 245 , please help how to go on 1113
markedoodlenup said:
Maximum 998 , minimum 245 , please help how to go on 1113
Click to expand...
Click to collapse
Did you flash a custom Sense / rom or a custom kernel? I meantioned that a post before.
As I said, you kernel might be restricting the overclock.
Edit:
Now I am using Evervolv Kitkat 26.12.13 nightly, It's great, got 1113 OC with it, A little bit less than with cronmod, but still good speed.
Really, Don't stay with stock sense, since you can't do much with it, If you want sense there's plenty of roms in Development section, w/ kernel optimisations and larger overclocks ( sounds kinky) .
If you don't know how to flash a custom rom / kernel ( w/ recovery ) then you should check tutorials of doing that.
My config;
- CM7r2 hboot
- 4EXT Recovery
- 2GB ext4 partition
- 32GB Sandisk Extreme Class 10 card
- CM 7.2.0.1 - rom altered by me with 7Zip and UOT Kitchen
- Go Launcher EX
markedoodlenup said:
Hello ive used Revolutionary ..Did you mean , when I change Rom overclock will work?
Click to expand...
Click to collapse
Like EviLShadeZ says; it depends on the ROM, and the kernel.. Rooting ur phone, does not automatically mean wild OC'ing..
Besides, most (if not all..?!) CyanogenMod ROMS have built-in CPU control, so u wont need NO frills CPU, or whatever..
- H