Hi,
Is there anyway to change the Voicemail number in Cyanogen os. I am aware that you can do this on cyanogenmod but I just can't find the settings because the Dialer app is different as it is the true caller version. When I try hotkey 1, I get Voicemail as a name but it hangs up. I need to change it to 443.
Thanks,
Jev
I managed to find the answer on a cyanogenmod forum.
Click the phone dialler icon, then bottom right is the menu button, go to settings/calling accounts/sim card1/voicemail/setup. You can edit here.
Click to expand...
Click to collapse
Related
Hi,
I installed the LVSW (Pro Style) ROM, and when I press the Dial button (green) - it goes into phone mode, great.
Now.
If I were to press the button again (to dial the last dialed number) then it doesnt work.
also if I press the joystick UP it doesn't go to history - like it used to with the original ROM.
any ideas on how to fix this?
thank you.
romka said:
Hi,
I installed the LVSW (Pro Style) ROM, and when I press the Dial button (green) - it goes into phone mode, great.
Now.
If I were to press the button again (to dial the last dialed number) then it doesnt work.
also if I press the joystick UP it doesn't go to history - like it used to with the original ROM.
any ideas on how to fix this?
thank you.
Click to expand...
Click to collapse
I've been asking the same question without any fixes. Not sure how to do it. There was a utility called "Smartskey" used in WM5. But I am not 100% certain that was employed in some of the WM5 cooked ROMS (Can someone confirm this??). I thought it was built into the functionality of the Hermes. I would love to have this functionality again.
anubus12 said:
I've been asking the same question without any fixes. Not sure how to do it. There was a utility called "Smartskey" used in WM5. But I am not 100% certain that was employed in some of the WM5 cooked ROMS (Can someone confirm this??). I thought it was built into the functionality of the Hermes. I would love to have this functionality again.
Click to expand...
Click to collapse
Either use the WM5 dialler (just change to a WM5 dialler skin as described 200 times already) or simply notice that call history and speed-dials are already in the shortlist above the keypad with the WM6 dialler (unless you;ve changed settings in phone.).
I notice the same in all WM6 and it is a pain in the ass too. But the WM5 dialer did NOT work for me, I use a WM 5 dialer since it looks better but still no fix. I agree and have come accustomed to using the history and speeddial list a lot more.
wpbear said:
I notice the same in all WM6 and it is a pain in the ass too. But the WM5 dialer did NOT work for me, I use a WM 5 dialer since it looks better but still no fix. I agree and have come accustomed to using the history and speeddial list a lot more.
Click to expand...
Click to collapse
I agree it's a pain. Can someone please fix this? Or do we have to install smartskey?
Anyone noticed that the latest Black v2.0 reverts back to the older style that we are looking for? Anyone know how this was done? Is it a new dialer or even an old WM5 dialer? The reason I would like to know is because other ROMs don't have this feature. I would like to install it manually on those ROMs.
I love the functionality of pushing the up directional button to get to history and not to scroll through smartdial.
romka said:
If I were to press the button again (to dial the last dialed number) then it doesnt work.
also if I press the joystick UP it doesn't go to history - like it used to with the original ROM.
any ideas on how to fix this?
thank you.
Click to expand...
Click to collapse
EDIT Registry::
HKLM\Security\Phone\Skin
Enabled = 1
.
.
.
Is this OK?
romka said:
I installed the LVSW (Pro Style) ROM, and when I press the Dial button (green) - it goes into phone mode, great.
Now.
If I were to press the button again (to dial the last dialed number) then it doesnt work.
also if I press the joystick UP it doesn't go to history - like it used to with the original ROM.
any ideas on how to fix this?
Click to expand...
Click to collapse
Start -> Settings -> System (tab) -> TweakUI. Make sure that "Enable VideoCall" is selected (checked). Restart your device. You now have a WM5-like smart dialer with the features you want enabled. Up or Right for call history, Down or Left for Speed Dial entries.
John
install HTC_smartdialer2.5 and any wm5 dial skin and you will get the speed dial and history functions back. Can't remember were I found it sorry.
johnburn said:
Start -> Settings -> System (tab) -> TweakUI. Make sure that "Enable VideoCall" is selected (checked). Restart your device. You now have a WM5-like smart dialer with the features you want enabled. Up or Right for call history, Down or Left for Speed Dial entries.
John
Click to expand...
Click to collapse
I don't have TweakUI on Black 2.5. Where do I get that?
I haven't seen this anywhere else on this forum, but is anyone else frustrated by the notification bar (top of screen) on the TP2?
On my kaiser I was used to being able to tap on each icon to take me directly into the relevant screen (e.g. Mail, calendar appointment, battery status, volume control or connections screen).
On the TP2 every icon just takes you into 'Notifications' and then you have to click again to go into mail or appointments, but there is no way to the battery, volume control or connections.
Is there any way of restoring the previous functionality of this bar?
Also - (unconnected) anyone know how to change the text colour on the Today screen?
Cheers,
Yup.... asking same question myself.
Get a registry editor, and find the key HKLM\Services\NOTIFICATIONMANAGER\Flags. It should be 0 by default - change it to 4. This stops the HTC notification manager running and restores the default WM functionality.
spl23 said:
Get a registry editor, and find the key HKLM\Services\NOTIFICATIONMANAGER\Flags. It should be 0 by default - change it to 4. This stops the HTC notification manager running and restores the default WM functionality.
Click to expand...
Click to collapse
Cheers - can you suggest a registry editor that works well on the TP2?
http://forum.xda-developers.com/showthread.php?t=530281&highlight=monx
Try that
spl23 said:
Get a registry editor, and find the key HKLM\Services\NOTIFICATIONMANAGER\Flags. It should be 0 by default - change it to 4. This stops the HTC notification manager running and restores the default WM functionality.
Click to expand...
Click to collapse
Works great. Thank you.
*edit* After hours of trying to find out why my text alerts (custom only) wouldn't ring. I changed the value back to "0" and my text alerts worked again. When I used the HTC stock text tones it would work, but not my custom ones. The phones ringtones and custom ringtones worked fine. Any ideas what would have caused the custom text tones not to work with this registry change?
I dont have that key
Hi
Sorry if i am being an idiot but I dont seem to have that key...
spvm2000 said:
Hi
Sorry if i am being an idiot but I dont seem to have that key...
Click to expand...
Click to collapse
If you are still having this problem, post the ROM version and the registry editor you are using and I can try to help you make the change to your registry key.
Thanks for the response
Rom version is: 1.19.61.3 (51489) WWE This is the standard Orange uk rom
For the registry editor i am using either Schaps registry editor on the phone or Mobile registry editor by Breaksoft on my pc.
Thanks in advance.
If you install the Topaz Notification Manager it gives you the battery status & an icon that'll bring you to the battery options.
elliott_stocks said:
http://forum.xda-developers.com/showthread.php?t=530281&highlight=monx
Try that
Click to expand...
Click to collapse
yep
that solved the problem for me
spvm2000 said:
Rom version is: 1.19.61.3 (51489) WWE This is the standard Orange uk rom
For the registry editor i am using either Schaps registry editor on the phone or Mobile registry editor by Breaksoft on my pc.
Thanks in advance.
Click to expand...
Click to collapse
Sorry, I am not familiar with that ROM. You can try using a different registry editor or just use the Topaz Notification Manager like xnifex suggested.
You can find it here:
http://forum.xda-developers.com/attachment.php?attachmentid=199592&d=1246059667
People Who have had a hard time with the dialer of x2 with the dialpad
..this is a small mortscript that will enable diable the dial pad.
it will install a prgram called dial pad switch to ur start menu
click it to enable/disable the dial pad..
twitter follower starzshowz
thanks will try the fix
doesnt work tried it, the keypad is hidden
if i tab the dialerswitcher, "There is no application assorciated with "changer" run the application first then open this file from within the application"
neowkewl said:
doesnt work tried it, the keypad is hidden
if i tab the dialerswitcher, "There is no application assorciated with "changer" run the application first then open this file from within the application"
Click to expand...
Click to collapse
You run the dialer pad application once! Then open your phone panel and the dialer pad is displayed. Or open phone panel and then run the dialer pad and it was pop up. Press the dialer pad application again and the keypad disappears.
@Rotastrain - When calling voicemail (or any calls) I can't open up the dialerpad to press #s to delete, save, or go on to the next voice mail message. Can ya come up with a fix for that please? Thanks.
Dialer don´t work in Landscape Modus on X1 Win6.1.
There is already a solution to the problem ???
Thanks..
Im Packing said:
You run the dialer pad application once! Then open your phone panel and the dialer pad is displayed. Or open phone panel and then run the dialer pad and it was pop up. Press the dialer pad application again and the keypad disappears.
Click to expand...
Click to collapse
lol i really don`t understand u buddy XD
what do you mean with the dialerpad application? the setup file ->cab?
and the : or open phone panel and poping up dialer pad, doesn`t work
the shortcut in the startmenue doesn`t work.
BUT if i call my voicemail i get the dialpad for that moment but still i can`t use the fixshortcut in startmenue
ok i think the startbar hide the button who tooks out the keypad.... wm6.5... how can i get the pad by an other way? or can i change that the startbutton and bar is up on the screen?
neowkewl, I had the same problem, so I installed mortscript 4.2 and now the dialpad appears.
But there isn't way to hide it again you will go back to run the fix to hide. is there an option to hide/unhide the dialpad?
Im Packing said:
@Rotastrain - When calling voicemail (or any calls) I can't open up the dialerpad to press #s to delete, save, or go on to the next voice mail message. Can ya come up with a fix for that please? Thanks.
Click to expand...
Click to collapse
neowkewl said:
lol i really don`t understand u buddy XD
what do you mean with the dialerpad application? the setup file ->cab?
and the : or open phone panel and poping up dialer pad, doesn`t work
the shortcut in the startmenue doesn`t work.
BUT if i call my voicemail i get the dialpad for that moment but still i can`t use the fixshortcut in startmenue
Click to expand...
Click to collapse
neowkewl said:
ok i think the startbar hide the button who tooks out the keypad.... wm6.5... how can i get the pad by an other way? or can i change that the startbutton and bar is up on the screen?
Click to expand...
Click to collapse
david-x1 said:
neowkewl, I had the same problem, so I installed mortscript 4.2 and now the dialpad appears.
But there isn't way to hide it again you will go back to run the fix to hide. is there an option to hide/unhide the dialpad?
Click to expand...
Click to collapse
The keypad button is hidden behind most wall papers. That's why Rotastrain made the mortscript.
Press the Phone button. Then go to windows start and press the dialpad fix program. Exit out of the Start menu. You should now have the dialpad open. Repeat procedure to close dialpad from the phone.
You could always try and program a softkey to the mortscript dialpad program and see if that works to simplify opening and closing the dialpad.
ok here is a video what says what my problem is right now
the fix doesn`t work
http://www.youtube.com/watch?v=VcPKMoRIcTo
neowkewl said:
ok here is a video what says what my problem is right now
the fix doesn`t work
http://www.youtube.com/watch?v=VcPKMoRIcTo
Click to expand...
Click to collapse
You need to install Mortscript 4.2, then you can click on that link on the Start menu.
ok now it`s working !!
but now i`ve got an other problem, if i push a number onec the sound that it makes, still continues für 10 seconds
any solutions ?
It works great, even when I restart the dailer the dailpad stays!
But is it possible to use dailpad while calling? I can't give response when calling my bank..
Does anyone know what it's this and how it work?
Added in MIUI 1.10.21:
Phone:
Added support for custom number attribution (area code, location and group numbers)
Click to expand...
Click to collapse
I found it in "Settings -> tab Programs -> Call Settings -> Customize attribution", but I don't understand how it works. On Google I found nothing.
Yeah, I'm also wondering about that.
theLofD said:
Yeah, I'm also wondering about that.
Click to expand...
Click to collapse
Me too - let me know if you find anything on it.
This is all I could find and it sounds dodgy
http://www.appbrain.com/app/go-contacts/com.jbapps.contact
It's to show City & State for callers. I previously had TouchPal Dialer and it had that feature.
Hello guys
the problem with impossibility change stock ICS dialer by another one from third party is driving me crazy... I tried everything including factory reset and complete wipe. Always the bloody stock dialer come up when use any dialer from the market. Even if I swipped launcher and phone icon on home screen. Third party dialer itself works OK, but when dialing I always getting stock ICS dialer!!
Kinldy ask all for help how to disable stock ICS original dialer that I hate!
Thanks indeed
Ciao
Go to settings for the phone.apk and clear defaults.
I did it, but when dialing form eXdialer, always stock comes up..., I rebooted phone after change, but still in troubless...
any clue?
If you mean the actual dialing (call active), you can't change that. Dialler is the app used to find the number, and the call itself is done through the stock dialer.
Swyped on my CM9 Galaxy Nexus
I recently found the answer in another thread...http://forum.xda-developers.com/showthread.php?t=1388274
bdangol said:
How can I change the default dialler for SGN so I can use Dialer one or Go Contact EX? it wont come up with the action request pop up.
Click to expand...
Click to collapse
The OP answered it himself, and did so by updating the #1 post, so it might not have looked like the answer...
The phone icon in the launcher is actually a direct link to the phone app so you just have to replace that with your own chosen dialler app! in 2.x it was a link to the default phone app but in ICS it is different.
Click to expand...
Click to collapse
So, just drag the phone icon off the bottom area and drag the alternate dialer you want to use down there.
Thanks guys for help.
To make it short, the main problem with dialer is that no possibility of SPEED DIAL. This has been solved by using shortcuts on second home screen for frequent calls. The key problem is impossibility to see right below the contact also a company. Actually I register roughly 1.400 contacts in the phone and not always sure about which caller belongs to what company once I get ring up. So I see only the name and not sure about company that the guy comes from.
Maybe some solution is already existing, so I would really apreciate it from you
Ciao