:::1st method:::
Just download and flash the pattern_password_disabler.zip from twrp
Reboot system
File link ??
https://drive.google.com/file/d/19luhyUpsA_IIuSAX_-rCHpcpLn1V4JlY/view?usp=drivesdk
:::2nd Method:::
Go to recovery and then advance >File manager
Open Data>system
Then find these 2 files named
getkeeper.password.key
getkeeper.pattern.key
Just delete these 2 files one by one and reboot system !
Done!
Helpful
Related
Hi, simple MOD to change the boot image of your tab.
HOWTO:
1- put your device in download mode;
2- flash with odin the attached file (PDA filed);
3- copy in the /mnt/.lfs/ folder your new image called logo.jpg
4- reboot and enjoy it!
IMPORTANT:
1- rename the image before the copy cause after you cannot mod it;
2- the image must have the same res of your tab;
3- images too big might don't work.
4- If something go wrong just reflash the .tar and follow again the steps above.
Thanks to ffgf that tested it.
Skin1980 said:
Hi, simple MOD to change the boot image of your tab.
HOWTO:
1- put your device in download mode;
2- flash with odin the attached file (PDA filed);
3- copy in the /mnt/.lfs/ folder your new image called logo.jpg
4- reboot and enjoy it!
IMPORTANT:
1- rename the image before the copy cause after you cannot mod it;
2- the image must have the same res of your tab;
3- images too big might don't work.
4- If something go wrong just reflash the .tar and follow again the steps above.
Thanks to ffgf that tested it.
Click to expand...
Click to collapse
Gonna try this one later. Thx man
Interesting...I never spotted this before. I still have my old 1010, I'll have to try this out! :good:
I edited a configuration file for Bluetooth(main.conf) in which i changed the device discoverable for value to be 0 (by default 120). then i left the folder as is (r/w) mode and saves and rebooted.
rescue mode is available(volume up - home -power)
boot loops continously
Kies not recognising when connecting when the device is turned off
there is a backup of the file at the same folder..
if you can provide me too ..how do i upload to my phone.
need help ASAP.
try installing firmware with odin
Other better ideas!
I am pretty sure that this matter was triggered because of that tweak..(editing of the file). I hope that restoring the original file would help.
Do you know about adb...?
Also i forgot where the actual bluetooth configurations file was in the root folder structure
adb will not work on device in recovery/download mode
to use adb mobile needs to be running
you can flash cwm in your mobile then upload the file and send me the link i will make a flashable zip and upload it then you can flash it
adb is running...just
Adb is running (while the phone keeps on showing boot animation-samsung logo-bootanimation-samsung logo-bootanima....) but it seems that it has permissions issues..i unrooted my phone before using adb .
i can access adb shell and list root directories but cannot enter further directories such as data\ permission denied
I donot have the file that i changed and quiet cannot remember it..
Check on your mobile and see for
data/misc/bluetoothd/
if it has files such as music.conf,main.conf etc etc..then this is the needed folder..
can you create a update.zip
like i used for rooting/ unrooting .that doesnt need CWM
that empties the directory ,because it has some backup files .bak created by root explorer
loads files from your mobile
i am currently unrooted ..do i need root?
actually adb works during splashscreen
get the original file and push it through the system, set permission and it should work
if all else fails,..... odin
download update.zip from http://dl.xda-developers.com/attach...5498d4d803e6a/4fcc0dd2/7/6/3/0/8/8/update.zip and place it in the root of your sdcard
go to recovery flash it you will get root then you can use adb
if it is not flashing first flash cwm through Odin then flash this update.zip through cwm
The file you sent is invalid. corrupt..?
what does this do..exactly.
i already have a update.zip and update-unroot.zip to root unroot my device
so
do i need root permission to use adb..because commands like
adb root gives"error not available in production devices"
&
adb shell
$ su
etc are showing permission denied.
if you have the original files on your galaxy y.. can you make update.zip with the above instruction
if adb works..i dont exactly remember the file path that i changed..so using the hints above please can you send me the file path
My aim here is to use odin or factory reset only at the last.
just root the device by flashing the root.zip in recovery and then use
adb shell
su
and it will work
No still get permission denied.... like always.
cd data
ls
open directory failed, Permission denied.
1. flash cwm recovery through odin
2. then upload the original file
3. I will create a update.zip and will upload it
4. you will need to flash it in cwm recovery
i will flash CWM using cwm.zip
i dont have the original file as i could not pull through adb..i hope your file may work
Finally i remembered the directory
/etc/bluetooth
the file i modified was main.conf however whole folder can be replaced from your mobile's or original one.
Thanks
y2k2r2d2 said:
i will flash CWM using cwm.zip
i dont have the original file as i could not pull through adb..i hope your file may work
Finally i remembered the directory
/etc/bluetooth
the file i modified was main.conf however whole folder can be replaced from your mobile's or original one.
Thanks
Click to expand...
Click to collapse
http://db.tt/2NStXBF8
flash it in recovery but it may not work as I don't have galaxy y I have a different mobile
it didnt allow installation both through cwm and recovery mode
& now
i messed up with CWM
backup-restore feature
create backup
edited the system.tar
put the original file
calculated md5 for new system,tar
edited the nandroid.md5 with appropriate editor and filled with the new calculated md5 of system.tar
advance restoore....select system files...
md5 check pass
restore fail
now boot stuck at initial screen
pretty sure even wipe data wont work
So i Had to resort to ODIN..Thanks for your time mate...
humm
I also think Odin is the last choice
-----ROOT AND INSTALL CUSTOM RECOVERY ON MICROMAX A75 WITHOUT PC-----===========================
Procedure:
1.Download the following package:::::link:Root_&_recovery_for_MMX_A75 - Download - 4shared
2.Extract the package and place the three files in the package to theroot of your sdcard with Rootexplorer.
3.Download the root explorer from here and install it.:::::link:Root Explorer v2.20 - Download - 4shared
4.Now reboot in to recovery mode.5.select update zip from sdcard and select the superuser.zip.(it willget flashed and then select reboot).Now your mobile is rooted.You can see superuser app in menu.
6.Now install mu73.apk and open it.
7.After opening it superuser asks you to allow the app.Press Allow....Next Tap on the "flash recovery from sdcard"......and next tap on the recovery.img file.(It'll automatically reboots in new custom recovery).8.That's it you have installed custom recovery.===========================
Disclaimer:
This method had WORKED for ME.
Am not responsible if your mobile is BRICKED.
DO AT YOUR OWN RISK.IF YOU DON'T WANT TO TRY THIS METHOD, THEN YOU CAN USE ANOTHER METHODS PRESENT IN THE FORUM.
Thank you,
Regards
Shrikant......
shrikant716 said:
-----ROOT AND INSTALL CUSTOM RECOVERY ON MICROMAX A75 WITHOUT PC-----===========================
Procedure:
1.Download the following package:::::link:Root_&_recovery_for_MMX_A75 - Download - 4shared
2.Extract the package and place the three files in the package to theroot of your sdcard with Rootexplorer.
3.Download the root explorer from here and install it.:::::link:Root Explorer v2.20 - Download - 4shared
4.Now reboot in to recovery mode.5.select update zip from sdcard and select the superuser.zip.(it willget flashed and then select reboot).Now your mobile is rooted.You can see superuser app in menu.
6.Now install mu73.apk and open it.
7.After opening it superuser asks you to allow the app.Press Allow....Next Tap on the "flash recovery from sdcard"......and next tap on the recovery.img file.(It'll automatically reboots in new custom recovery).8.That's it you have installed custom recovery.===========================
Disclaimer:
This method had WORKED for ME.
Am not responsible if your mobile is BRICKED.
DO AT YOUR OWN RISK.IF YOU DON'T WANT TO TRY THIS METHOD, THEN YOU CAN USE ANOTHER METHODS PRESENT IN THE FORUM.
Thank you,
Regards
Shrikant......
Click to expand...
Click to collapse
Are the packages signed????
Hi Guys,
Today I will share my lenovo boot animation & my boot logo...
I have borrowed it from vibe 2.9 rom for lenovo a6000 plus.
Only I edited it for the loop of the boot animation with the help of few tools..
These are flashable zips,
so download it, put it in your root directory then flash it with your any custom recovery..
Hope you like it..
& press like if you realy liked it...
Nice work bro !! like it :good:
Joker_XD said:
Nice work bro !! like it :good:
Click to expand...
Click to collapse
Thanks man!!
Clean awesome bootanimations works fine with our Lenovo A6000
First of all, credit goes to KonradIC13, he has made all these boot animation, I am just sharing them here..
These all are Boot Animation not boot logo.
These are not meant to be flashed.
Do not try to flash these from recovery
Rename the zip file to bootanimation.zip ( Remove/delete it's serial no eg. bootanimation1.zip rename to : bootanimation.zip)
Using root explore or other app that can browse file ( like ES explorer or X-plore)
Access folder: root\system\media\ and
simply copy and paste the renamed zip bootanimation.zip to folder root\system\media\ where original bootanimation.zip is stored
(backup your old boot animation zip and then overwrite the new is recommended if want your previous boot animation in future ).
Reboot, you've new boot animation , Enjoy :good:
How to flash please ... instruct me in Detail
Do not Flash. It's not a flashable zip.
ayush24 said:
How to flash please ... instruct me in Detail
Click to expand...
Click to collapse
You don't have to Flash the last 5 zips of Clean Boot animation with no texts
Just
Rename the zip file to bootanimation3.zip to bootanimation.zip eg( bootanimation3.zip = bootanimation.zip)
Using ES explorer (open ES explorer , click on Menu> root explorer> R\W Mount R/W
then tick all RW radio botton > OK )
and copy and paste the zip file in folder root\system\media\ and Replace
Reboot...... Done :good:
How to do boot logo
Is it compatible for use in Lenovo Vibe C?
I've installed a MIUI custom rom on it.
I am able to change boot animation in the root directory but how can I change the boot logo and what is the directory.....?
Give the new off-line charging logo for lenovo....pls
Guyz,made a boot animation for lenovo a2010 myself...
"Special thanks to XIHunter for the source::
Anyone interested can try.....(tested on flyme os for lenovo a2010)
Hi,
i want to perform below things on my mi mix 2 :
1. Delete a CONF file located in /system/vendor/etc .
2. Have stock recovery and do not need root thereafter.
Is there any way i can do that like through adb or something so that i don't have to flash SUPERSU and root my phone. This deletion of system file is only a onetime activity and i do not need root on my phone.
Thanks in advance!
Hey Guys, you reply is awaited please. Whole purpose of above request is that if i root and delete that file, i need to flash full OTA everytime and delete that file again. So if without root i could delete that file, full OTA wouldn't need to be flashed.
you can try with adb in recovery, but you must have twrp
thriller76 said:
you can try with adb in recovery, but you must have twrp
Click to expand...
Click to collapse
Could you please list the commands /steps to do so.. I want to delete a file from system/vendor folder..
You must unlock bootloader, install twrp recovery, reboot to recovery and you can delete files from filemanager in recovery