Related
Hello.
After many many tinkering and a small hint from @rovo89, finally i can present you the first stable version of the grorkmod.
Added v1.7 LineageOS-Version
Fix for bluetooth
Updated Audio_policy.conf will be copied. Result is a working audio.
Click to expand...
Click to collapse
Added v1.0 LineageOS-Version
Until the fix is integrated in the Rom, you can use the LOS-Version for a working fm-radio.
The Fix will add the following rights to selinux:
system_app fm_device:chr_file {write, read, open, ioctl}
This is a quick'n'dirty way.
Click to expand...
Click to collapse
Added v1.1 lite
In this version the fix is the same, but the script dont need an installed superuser. Also it will leave the system untouched.
Ive tested this version with Eragon v4.0 (With Gravitybox as testmodule, guess what... its working. Ive NOT tested if magisks will work properly with banking apps. please do it for me.
Click to expand...
Click to collapse
Review betaversions
In the past versions i have tried to workaround the problem.
At projectstart i have seen many audit denies. I tried to eliminate them with injecting allows to the sepolicy.
This was a part of the little success i had with the first versions. The other part was to set the classes internally to permissive.
These two components and the "bootprocesshack", in which i changed the sepolicy-binary in root, made the beta versions working.
The problem in the beta version was always, that in some cases the workaround didn't worked.
Click to expand...
Click to collapse
Stable
After an hint that @rovo89 gave me, i saw the problem in seconds, and.... *FACEPALM*
I've saw the problem and didn't saw it anyway.....
For a reason i don't know (maybe it's just a fault from Elephone or mediathek?) they "forget" to setup the contexts files not correctly.
With this mod i fix the entries in the seapp_contexts and file_contexts.
This is the whole magic.
Click to expand...
Click to collapse
Installation
Wipe Dalvik/Cache
Install ROM
Install SuperSU
Install grorkmod
Install xposed
then boot to system
Click to expand...
Click to collapse
Have fun with a fully working ROM!
greetings
vsrookie
CREDIT / INSPIRATION
@Chainfire - for his overwhelming work. @rovo89 - for making apps bend like metal
@skeleton1911 - for making his rom and his work
@Mikos - for his setools for android
@Deepflex - for all the work done to our device
Click to expand...
Click to collapse
Download mod LOS-Version v1.7
Download mod v1.1 lite
Download mod v1.0
Alternative Download
alternative Download mod v1.0
older Versions:
Download mod LOS-Version v1.5
Download mod LOS-Version v1.0
Download mod v0.94
Mirror v0.94
Download mod v0.8
Download mod v0.7
Download mod v0.6
Download mod v0.5
old Projectdescription:
About
This is a solution to get the xposed framework running in enforcing mode AND keep it running after a reboot, dalvik cache wipe and installation of any app.
The main goal is for sure the working xposed framework in enforcing mode, but as we all noticed there are several issues that come with a script that only set the selinuxmode to permissive. That's the second part of this project, trying to not change the behaviour of apps like on stockrom.
Click to expand...
Click to collapse
Background
As i get the p9000 and installed eragon the first time, i installed the xposed framework as fast as i can and.... everything works? Installed modules and... nothing worked!? I tried some things to get it working, but with everything i tried, i had to take a smear.
Pretty annoying, isn't it?
I took a deeper look into selinux and tinkered.... and tinkered ... and tinkered!
Now i think it's time to share my stuff with this great community and i hope that i will help with my mod.
Click to expand...
Click to collapse
BEWARE/Disclaimer
If you don't know what selinux is, then i think you have to read a "little bit" about it. (pure linux stuff; non Android)
If you google it, then you find everything you need, to learn more about it. If you don't know what rooting is, then play Angrybirds instead.
Understand this:
SELinux is a abbreviation for Security Enhanced Linux. That isn't just a name, it's the programm.
With this mod you will loose the S in the name.
Please be sure you have made a backup from everything that's important for you.
I've done this mod in all conscience, but I'm not responsable for bricked devices. Realize it!
You have been warned! :good:
Click to expand...
Click to collapse
The idea behind
This mod installs setools binaries to /su/bin, so you use them on terminal with this mod. We need them to inject permissions to the sepolicy binary. The next problem is, that the original sepolicy is compiled into the kernel (rootfs). Thats why it will be overwritten on boot. If you inject permissions manually, they are gone with every reboot. So i wrote a script that injects permissions on boot to a patched (with superkernel) sepolicy binary and copy it to root.
Click to expand...
Click to collapse
Installing
Now the funny part! :highfive:
What you need
I tested this mod on Eragon v2.8 and Aerom V3.
So you need one of these Roms (i think it will also work on rooted stockrom and Darksense, cause the two three other based on stockrom)
superSu 2.74
xposed framework v85
and of course my mod (see the attachement).
How to
Download everything to your SDCard.
Make sure you have wiped your device, so you can start fresh. (I don't have tried, only to flash this mod.)
Dont reboot. If you reboot, then reboot into recovery again!
Install the rom of your choice. (If you install Eragon v2.8, then be sure to delete the script inside /system/etc/init.d)
Install SuperSu 2.74
Install XposedFramework v85
Install Grorkmod
After this step just reboot. And check if everything is fine.
If not then let me know!
Click to expand...
Click to collapse
XDA:DevDB Information
Grorkmod, Tool/Utility for the Elephone P9000
Contributors
vsrookie
Version Information
Status: Stable
Current Stable Version: 1.1
Stable Release Date: 2016-09-17
Current Beta Version: 0.94
Beta Release Date: 2016-06-09
Created 2016-06-09
Last Updated 2017-02-17
Reserved
LineageOS-Versions
v1.7
- FIX for not working audio over Bluetooth.
LineageOS-Versions
v1.0
- FIX for not working FM-Radio
Stockrom-Versions
v1.1 (lite version; systemless)
- reworked the script, so it will run systemless
- init.d support don't implemented in this version
- old grorkmods wil NOT be removed. So you have to install this one from scratch.
v1.0 (STABLE RELEASE!)
- live patching seapp_contexts and file_contexts
- live patching sepolicy binary at flashing time, add some allows were missing
- add init.d support as supposed to be
- disabling old grorkmod versions at flashin time.
v0.94
- live patching sepolicy binary at flashing time.
- works on all stockbased Roms
- Add init.d support, if it is not implemented already (For Stockrom; busybox EXCLUDED; it has to be installed afterwards to /system/xbin).
Minor changes are:
- cleared out Installer
Current issues:
- sometimes it's lost on reboot. Workaround: just reboot another time, or shutdown phone and reboot again.
v0.8
tidied up scripts
changed hook for injecting sepolicy
v0.7
simplified script
fixed an issue if phone shutdown
v0.6
fixed logcat support in scripts.
v0.5
Beta release
What exactly does your mod do then?
Sent from my P9000 using Tapatalk
mrbubba999 said:
What exactly does your mod do then?
Sent from my P9000 using Tapatalk
Click to expand...
Click to collapse
Hi.
Thank you. Didn't noticed!
I've added "the idea behind" to the first post.
greetings
vsrookie
Sent from my P9000 using XDA-Developers mobile app
do you need the xposed app?
Hi.
What do you mean?
You have to install it for installing xposed modules. Just install it after boot.
Greetings
Vsrookie
Sent from my P9000 using XDA-Developers mobile app
ok, thanks. did a quick test with AeromV3. At first gravitybox, app settings, flat color keyboard* worked after a soft reboot. Ebay app also worked.
Then on next soft reboot there was 2 loops of optimizing apps and only gravity worked.
Shut off the phone and restarted, none worked. After what I have read that was expected.
Did a soft reboot in xposed,then loops of android is starting- optimizing app . after third loop i shutdown the phone and restarted. Then xposed did not work. Tried another soft reboot, this time no loop and xposed modules are working and ebay app works.
mangoman said:
ok, thanks. did a quick test with AeromV3. At first gravitybox, app settings, flat color keyboard* worked after a soft reboot. Ebay app also worked.
Then on next soft reboot there was 2 loops of optimizing apps and only gravity worked.
Shut off the phone and restarted, none worked. After what I have read that was expected.
Did a soft reboot in xposed,then loops of android is starting- optimizing app . after third loop i shutdown the phone and restarted. Then xposed did not work. Tried another soft reboot, this time no loop and xposed modules are working and ebay app works.
Click to expand...
Click to collapse
Hi.
Never tried to softreboot the phone. I will try and report back as fast as i can.
Did you made a clean install? Or dirty flashed the mod?
greetings
vsrookie
clean AeromV3 install. normal reboots do not work
Good I have 3 sim cards on same number the way I mess with my phones.
Hi.
Tried to softreboot the phone from xposed installer. That don't work, that's sure.
On Eragon normal reboots work. I will test with Aerom soon.
greeting
vsrookie
Sent from my P9000 using XDA-Developers mobile app
ok, will test eragon. It stopped working altogether now on AeromV3 after several soft reboots, shutdowns and normal reboots.
gravitybox seemed to work, but other modules seemed to stop. Disabled gravity but that did not seem to work.
Also the android starting, optimizing app message loops seems random.
Seems better on eragon. Works after normal reboot, and from powered off. Ebay also works.
edit2..
so after installing same apps and some reboots, xposed modules will not function sometimes. A few reboots and this time they came back working.
one app that does not work is amplify, maybe just coincidence but that one seems to brake the other when selected.
mangoman said:
ok, will test eragon. It stopped working altogether now on AeromV3 after several soft reboots, shutdowns and normal reboots.
gravitybox seemed to work, but other modules seemed to stop. Disabled gravity but that did not seem to work.
Also the android starting, optimizing app message loops seems random.
Seems better on eragon. Works after normal reboot, and from powered off. Ebay also works.
edit2..
so after installing same apps and some reboots, xposed modules will not function sometimes. A few reboots and this time they came back working.
one app that does not work is amplify, maybe just coincidence but that one seems to brake the other when selected.
Click to expand...
Click to collapse
Is your edit 2 referring to eragon 2.8?
yes.
3-4 reboots, and not working. 1 soft reboot and they came back.
so seems a luck of the draw when it works after a reboot.
mangoman said:
yes.
3-4 reboots, and not working. 1 soft reboot and they came back.
so seems a luck of the draw when it works after a reboot.
Click to expand...
Click to collapse
Thanks, I'll leave it for now.
I made a backup of my eragon before I did any xsposed stuff, I can install that for eBay etc ...
PS - so I can't install this with xposed already running?
mangoman said:
yes.
3-4 reboots, and not working. 1 soft reboot and they came back.
so seems a luck of the draw when it works after a reboot.
Click to expand...
Click to collapse
That s not true.... sorry.
I am on aeromv3 right now rebooted around 5 times (normal, not over xposedinstaller).
Everything works as expected. Even with amplify.
Do you use backuped Apps?
Greetings
Vsrookie
Sent from my P9000 using XDA-Developers mobile app
arlrb said:
Thanks, I'll leave it for now.
I made a backup of my eragon before I did any xsposed stuff, I can install that for eBay etc ...
PS - so I can't install this with xposed already running?
Click to expand...
Click to collapse
Hi.
You have to do a clean install of the Rom of your choice. Install newest supersu and xposed, install this mod.
Everything should work fine.
If it is not so, there is another Problem. Maybe backuped Apps?
Greetings
Vsrookie
PS: if you install Eragon, don't forget ti delete the initd Script.
Sent from my P9000 using XDA-Developers mobile app
yes, strange. At first on eragon it worked with reboots, but after a few of them not so much. Then soft reboots seemed to do the trick.
Right now got amplify working. This time did not enable it in xposed first, but rather ran the app then enabled it in xposed when it asked.
vsrookie said:
Hi.
You have to do a clean install of the Rom of your choice. Install newest supersu and xposed, install this mod.
Everything should work fine.
If it is not so, there is another Problem. Maybe backuped Apps?
Greetings
Vsrookie
PS: if you install Eragon, don't forget ti delete the initd Script.
Sent from my P9000 using XDA-Developers mobile app
Click to expand...
Click to collapse
They say you should flash the framework before installing the installer & modules.
So should I install this after framework but before installer, or after framework & installer?
mangoman said:
yes, strange. At first on eragon it worked with reboots, but after a few of them not so much. Then soft reboots seemed to do the trick.
Right now got amplify working. This time did not enable it in xposed first, but rather ran the app then enabled it in xposed when it asked.
Click to expand...
Click to collapse
Hi.
Can you give the new version 0.7 a shot?
I had issues if the phone shut down completely. At this point i had also no running xposed anymore.
Fixed this.
Now i can reboot also out of xposed installer.
Greetings
vsrookie
Sent from my P9000 using XDA-Developers mobile app
arlrb said:
They say you should flash the framework before installing the installer & modules.
So should I install this after framework but before installer, or after framework & installer?
Click to expand...
Click to collapse
Hi.
This order:
wipe
install rom
install supersu
install xposed franework
install mod
boot
install xposed installer
install modules
activate them
restart phone
greetings
vsrookie
Sent from my P9000 using XDA-Developers mobile app
Hello,
I have version D85130e installed on my phone and am rooted on the stock ROM. I received a System update notice this morning so i thought there was a new software version for the phone, but when I check on the T-mobile site for the LG G3, it says that D85130e is the latest version. (Cant post links because I am a new user).
I am confused, has anyone else received this update? I couldn't find anything about it. It is 133.0MB in size and says that it 'includes Android Security updates among other changes'.
I don't want to install it in case in breaks my root or worse. Does anyone here have any information about this?
Thank you!
received the update too
seleucid said:
Hello,
I have version D85130e installed on my phone and am rooted on the stock ROM. I received a System update notice this morning so i thought there was a new software version for the phone, but when I check on the T-mobile site for the LG G3, it says that D85130e is the latest version. (Cant post links because I am a new user).
I am confused, has anyone else received this update? I couldn't find anything about it. It is 133.0MB in size and says that it 'includes Android Security updates among other changes'.
I don't want to install it in case in breaks my root or worse. Does anyone here have any information about this?
Thank you!
Click to expand...
Click to collapse
tho i was disappointed it wasn't a 7.0 update, but i'm installing it right now and i would love to know: what's new?
Its a April security update. I will make a flashable zip with it. If anyone wants to try it pm me and I will share the link when its uploaded.
Link to try it: https://forum.xda-developers.com/showpost.php?p=72931940&postcount=98 Flash MagiskSU after flashing the zip.
from what I read yesterday, it's the D85130G update. https://goo.gl/ktuJMP
I don't want to chance unrooting my phone with this update. I'll wait till there is a rooted version to flash
jdmst77 said:
from what I read yesterday, it's the D85130G update.
I don't want to chance unrooting my phone with this update. I'll wait till there is a rooted version to flash
Click to expand...
Click to collapse
You can flash the update from the zip above and then flash magisk. That worked for me, I have v30G and root access. Thanks to MESA for suggesting it.
edit: MESA already said this above.
Stable update by MESA. No need to think about losing root access as MAGISK does the trick perfectly.
Everything is stable so far after 2 days of usage. I'll continue to give updates as and when I detect something unusual.
@eadumensah: is your safetynet working with MAGISK?
MESA said:
Its a April security update. I will make a flashable zip with it. If anyone wants to try it pm me and I will share the link when its uploaded.
Link to try it: https://forum.xda-developers.com/showpost.php?p=72931940&postcount=98 Flash MagiskSU after flashing the zip.
Click to expand...
Click to collapse
Thanks for keeping this old phone alive, it's running much better after the update. I just flashed it right over everything.
bluehacker007 said:
@eadumensah: is your safetynet working with MAGISK?
Click to expand...
Click to collapse
Not anymore. It worked on V12 but stopped after I upgraded to v13. Let me know in case you get a solution to that.
bluehacker007 said:
@eadumensah: is your safetynet working with MAGISK?
Click to expand...
Click to collapse
Ignore my earlier update. It does now after upgrading to v13.2
eadumensah said:
Ignore my earlier update. It does now after upgrading to v13.2
Click to expand...
Click to collapse
After a lot of testing it seems to me that safetynet works fine until I install xposed. Furthermore, installing systemless xposed from the magisk repository results in failure to boot. If I install systemless xposed from the xposed materialdesign app I am able to boot and use xposed modules but my safetynet check fails. I'm using magisk v13.2, magisk manager v5.0.6, material xposed installer v3.0.1 and systemless xposed v87.0 sdk 23 by topjohnwu.
Edited to add versions.
bluehacker007 said:
After a lot of testing it seems to me that safetynet works fine until I install xposed. Furthermore, installing systemless xposed from the magisk repository results in failure to boot. If I install systemless xposed from the xposed materialdesign app I am able to boot and use xposed modules but my safetynet check fails. I'm using magisk v13.2, magisk manager v5.0.6, material xposed installer v3.0.1 and systemless xposed v87.0 sdk 23 by topjohnwu.
Edited to add versions.
Click to expand...
Click to collapse
I got rid of xposed and deleted the play store data. Got into the magisk hide option and checked the following
1. Google play store
2. Google services framework
This is to hide it from detection by google. You can try it without deleting xposed first and let's see the outcome.
eadumensah said:
I got rid of xposed and deleted the play store data. Got into the magisk hide option and checked the following
1. Google play store
2. Google services framework
This is to hide it from detection by google. You can try it without deleting xposed first and let's see the outcome.
Click to expand...
Click to collapse
Tried that but it did not work. If I enable magisk core only mode (which disables systemless xposed) then I can pass security check. The only other magisk module I have is unified hosts adblock and I very much doubt that that is causing the safetynet failure.
Interesting side note: I've deleted apps from /system/apps and /system/priv-app from TWRP and I've changed the DPI using texdroider and these changes don't seem to trip safetynet.
lg g3 d851 30e MM not rooted
please help
i have an lg g3 d851 30e MM not rooted
i want to root(magisk systemless root) my lg g3 instal twrp and get the firmware v30G !!!!
what should i do
---------- Post added at 11:20 PM ---------- Previous post was at 10:43 PM ----------
MESA said:
Its a April security update. I will make a flashable zip with it. If anyone wants to try it pm me and I will share the link when its uploaded.
Link to try it: https://forum.xda-developers.com/showpost.php?p=72931940&postcount=98 Flash MagiskSU after flashing the zip.
Click to expand...
Click to collapse
lg g3 d851 30e MM not rooted
please help
i have an lg g3 d851 30e MM not rooted
i want to root(magisk systemless root) my lg g3 instal twrp and get the firmware v30G !!!!
what should i do
bluehacker007 said:
After a lot of testing it seems to me that safetynet works fine until I install xposed. Furthermore, installing systemless xposed from the magisk repository results in failure to boot. If I install systemless xposed from the xposed materialdesign app I am able to boot and use xposed modules but my safetynet check fails. I'm using magisk v13.2, magisk manager v5.0.6, material xposed installer v3.0.1 and systemless xposed v87.0 sdk 23 by topjohnwu.
Edited to add versions.
Click to expand...
Click to collapse
so you were able to get xposed to install and work correctly on 30G? Please confirm
whenever I tried, I could never boot up the device. If failing safetynet means that i can have xposed on 30G, I'm ready to upgrade from 30E
jdmst77 said:
so you were able to get xposed to install and work correctly on 30G? Please confirm
whenever I tried, I could never boot up the device. If failing safetynet means that i can have xposed on 30G, I'm ready to upgrade from 30E
Click to expand...
Click to collapse
I did get xposed to work but don't download and install the framework from the magisk app - use the xposed material design app to download and install the framework. I'm not sure why the magisk supplied framework doesn't work - it caused me to get stuck at boot as well.
bluehacker007 said:
I did get xposed to work but don't download and install the framework from the magisk app - use the xposed material design app to download and install the framework. I'm not sure why the magisk supplied framework doesn't work - it caused me to get stuck at boot as well.
Click to expand...
Click to collapse
I've been waiting for this info to upgrade. Thanks for all the details, including version, etc
A modified xposed installer and framework for nougat is now available thanks to the Purify os team and rovo
https://forum.xda-developers.com/xposed/xposed-android-nougat-sdk-25-arm64-t3639221
Follow the link above.
1. Make backups, twrp/titanium
2. Install the modified xposed installer first, must be done first!
https://forum.xda-developers.com/devdb/project/?id=13191#downloads
Use the top one on the list it may get updated
3. Next download the modified xposed framework from Purify here
http://fastkit.org/xposed/
Follow the links.... SDK24 for nougat 7.0..... Then download the xposed version 87 model... Flash from twrp
Again make sure you fully back up, it all went fine for me, but sometimes these things don't go right.
Plenty of posts in the linked forum but a bit of a jumble as usual, all with varied results, but the above will work for us.
Not sure how many modules are usable yet, I have one working so I know it does work.
Which are you using, and what would you like to use?
undrwater said:
Which are you using, and what would you like to use?
Click to expand...
Click to collapse
Status bar sleep.. Working
Status bar download progress.... Working (mostly)
Status bar cpu temp.. Not working
Status bar cpu frequency.. Not working
Any of the status bar theming such as wanams xtouchwiz would be good
Also xinternalsd was useful but not working
Can you change aspect ratio yet?
blaze82 said:
Can you change aspect ratio yet?
Click to expand...
Click to collapse
Not something I would normally do, is there a particular module you use for that?
It's been such a long time since I came across this, being able to adjust screen ratio and dpi on a per app basis. No real reason to now but with the 4:3 ratio on this tab, it'll be nice.
Also, been a while since I've used xbosed
does not work for me.. i get a recovery-boot loop and it does not start the system
Ch3ck3rM0n said:
does not work for me.. i get a recovery-boot loop and it does not start the system
Click to expand...
Click to collapse
I have been using it without problem for a while, but the versions used are crucial to success, I couldn't get the magisk systemless to work. Try going back to the beginning and make sure each download is correct, the method in the first post will work.
hmm.. but i need magisk :-/
Ch3ck3rM0n said:
hmm.. but i need magisk :-/
Click to expand...
Click to collapse
Ok, it may be possible for it to work, I didn't persist with it, what is the benefit with magisk for you?
rorymc928 said:
Ok, it may be possible for it to work, I didn't persist with it, what is the benefit with magisk for you?
Click to expand...
Click to collapse
Get it work with super su but installed OBBonSD does not work (with GTA, KotoR,...). Do you have any idea?
EDIT: Found a solution with http://repo.xposed.info/module/com.pyler.xinternalsd
I have followed the directions exactly and I tried twice to install xposed on my t825 rooted with magisk 14. No luck unfortunately. Has anybody been successful in installing it ??
If yes, could he share the methodology ?
xpil said:
... with magisk 14
Click to expand...
Click to collapse
had the same problem.. remove magisk and install superSU.. xposed do not work with magisk -.-' on this tablet..
Question, how do I remove xposed again?
Can I do it with the installer app, or do I need a special skript? Never used Xposed on Samsung before and I know everything works differently.
Hello,
Your experience : Do you have a "" Tab S3 SM-T825, Nougat 7.0, Root SuperSU "" on which you have installed Xposed.
1- Does Xposed work normally with different modules?
(No Bootloop or tablet block?)
2 - Which version xposed * .zip ?
3 - Which Version XposedInstaller _ *. Apk ?
Thank you
Cordially
Yam_y
Yam_y said:
Hello,
Your experience : Do you have a "" Tab S3 SM-T825, Nougat 7.0, Root SuperSU "" on which you have installed Xposed.
1- Does Xposed work normally with different modules?
(No Bootloop or tablet block?)
2 - Which version xposed * .zip ?
3 - Which Version XposedInstaller _ *. Apk ?
Thank you
Cordially
Yam_y
Click to expand...
Click to collapse
Fairly old thread this, I have a T820, however I've made roms for both variants, the t825 thread is here,
https://forum.xda-developers.com/galaxy-tab-s3/development/rom-sm-t825-tweaked-t3769742
the earlier versions are nougat the latest 3.0 on are oreo both work fine, you'll find instructions in the thread, if changing to oreo you need to flash the oreo bootloader, through odin, if returning to nougat you need to flash the older nougat bootloader as they're not cross compatible.
Xposed works fine on both, xposed installer included after booting, start the xposed installer app and select install it picks the correct version.
Root is by magisk.
rorymc928 said:
Fairly old thread this, I have a T820, however I've made roms for both variants, the t825 thread is here,
https://forum.xda-developers.com/galaxy-tab-s3/development/rom-sm-t825-tweaked-t3769742
the earlier versions are nougat the latest 3.0 on are oreo both work fine, you'll find instructions in the thread, if changing to oreo you need to flash the oreo bootloader, through odin, if returning to nougat you need to flash the older nougat bootloader as they're not cross compatible.
Xposed works fine on both, xposed installer included after booting, start the xposed installer app and select install it picks the correct version.
Root is by magisk.
Click to expand...
Click to collapse
Hello Rorymc
Thanks for the answer and for the link SM-T825 TWEAKED, but I'm already Root with SuperSU + Dm-Verity with Rom ARA2 Nougat 7.0 and I just have to flash Xposed with TWRP.
So, I think I have to take Xposed.zip and Xposedinstaller APK from rovo89 in pure version without add and unmodified ?
I hope I'm not mistaken .....
Cordially
Yam
Yam_y said:
Hello Rorymc
Thanks for the answer and for the link SM-T825 TWEAKED, but I'm already Root with SuperSU + Dm-Verity with Rom ARA2 Nougat 7.0 and I just have to flash Xposed with TWRP.
So, I think I have to take Xposed.zip and Xposedinstaller APK from rovo89 in pure version without add and unmodified ?
I hope I'm not mistaken .....
Cordially
Yam
Click to expand...
Click to collapse
Yes that's correct, just make sure you get the correct versions, if anything goes wrong just restore your backup.
rorymc928 said:
Yes that's correct, just make sure you get the correct versions, if anything goes wrong just restore your backup.
Click to expand...
Click to collapse
Hello,
Thank you. Well understood. I like your precise answers
Cordially
Yam
Hi z5 premium users, there is a guide for installing xposed on nougat 7.1 .1
There are some z5 users who used this method and it's working for them.
Any one tested this on z5 premium ?
Working or not?
https://forum.xda-developers.com/xposed/xposed-android-nougat-sdk-25-arm64-t3639221
mahyjooon said:
Hi z5 premium users, there is a guide for installing xposed on nougat 7.1 .1
There are some z5 users who used this method and it's working for them.
Any one tested this on z5 premium ?
Working or not?
https://forum.xda-developers.com/xposed/xposed-android-nougat-sdk-25-arm64-t3639221
Click to expand...
Click to collapse
I Have Z5p E6853 and Android N 7.1.1 32.4.A.0.160 stock rooted kernel and Xposed(SDK25 ARM64 ) does work on my device and a lot of modules work great and even Amplify works great, but only after i moved it to system partition and changed permissions to 777, not all modules work though (Greenify doesn't work) - but i moved it to system/priv-app folder and i use it as "Root + Privileged (Rom-integrated)" working mode .
So i Suggest to try your best with Xposed too!
Shade20041987 said:
I Have Z5p E6853 and Android N 7.1.1 32.4.A.0.160 stock rooted kernel and Xposed(SDK25 ARM64 ) does work on my device and a lot of modules work great and even Amplify works great, but only after i moved it to system partition and changed permissions to 777, not all modules work though (Greenify doesn't work) - but i moved it to system/priv-app folder and i use it as "Root + Privileged (Rom-integrated)" working mode .
So i Suggest to try your best with Xposed too!
Click to expand...
Click to collapse
Thanks for your feedback ?
I always use some modules like : fsbi, lolistat, hide navbar, xposed edge, battery notification mode, are these working on nougat too? Could you test them if it's possible for you? However I'm on e6833.
And is there any unistall patch for nougat xposed to flash through twrp?
mahyjooon said:
Thanks for your feedback
I always use some modules like : fsbi, lolistat, hide navbar, xposed edge, battery notification mode, are these working on nougat too? Could you test them if it's possible for you? However I'm on e6833.
And is there any unistall patch for nougat xposed to flash through twrp?
Click to expand...
Click to collapse
You are very welcome!
As for "Xposed edge pro", I use it all the time and it works great but you need to restart after every change to see the affect.
Here is the link to the Uninstaller(System-less and system mode): http://main.purifyos.it/xposed/
It literally saved me many times after boot-loops or sony logo freeze and etc...
All taken from here: https://forum.xda-developers.com/xposed/xposed-android-nougat-sdk-25-arm64-t3639221
As for other modules, i'm currently testing another rom(LineageOS) so i haven't installed Xposed there yet, but i'll keep you posted for when i install Xposed if you wish.
Hope it helps!
Did you ran into an issue where the Xposed is installed but not active? If so how did you resolve it?
DarkSilentSC said:
Did you ran into an issue where the Xposed is installed but not active? If so how did you resolve it?
Click to expand...
Click to collapse
Make sure you install the latest Xposed Installer,
Always pick the latest("XposedInstaller_by_dvdandroid_04_08_17.apk" in this case ):
https://forum.xda-developers.com/devdb/project/?id=13191#downloads
I have tested it myself, it partly worked for me too, z5 premium dual e6833 7.1.1 build. 160, fsbi and lolistat worked partly again, I needed fsbi for changing the size of notifications,but it isn't working for notifications (
Hide navbar is not working too. I'm waiting for stable and fully work framework
I have tested. Working (7.1.1-Z5)
how to root xperia z5 premium dual
mhyr said:
Thanks for your feedback
I always use some modules like : fsbi, lolistat, hide navbar, xposed edge, battery notification mode, are these working on nougat too? Could you test them if it's possible for you? However I'm on e6833.
And is there any unistall patch for nougat xposed to flash through twrp?
Click to expand...
Click to collapse
Hi my friend,
how did you root this version of android?
My phone is the same as you but E6833,could you please help me and show me the way?
thanks in advance
Hey just a thought, I found Magisk was great in managing all of this kind of stuff, where it takes the questions out of it. Just root your phone with magisk and install the Xposed module, download and install the magisk supported Xposed app and there you have it, fully working Xposed framework, systemlessley!
I've searched XDA and tried all the suggestions, but I still can't get Magisk to open on my Tab S. It is rooted with Lineage 17.1. I downloaded Magisk V26.1, renamed it to a zip file and installed with TWRP. I uninstalled and installed 3 times and still no luck. I also cleared cache and storage. There is no hidden version of Magisk. Anything else I can try? Maybe an older version of Magisk? Should I try wiping Dalvik cache using TWRP and if so, before or after installing Magisk?
Thanks!
Tom
try magisk canary or magisk delta
lapsmith said:
I've searched XDA and tried all the suggestions, but I still can't get Magisk to open on my Tab S. It is rooted with Lineage 17.1.
Click to expand...
Click to collapse
As you say it's rooted already why do you need to install Magisk 26 again at all, the current version already is 26.2 btw.
Cheers
Toscha
toscha42 said:
As you say it's rooted already why do you need to install Magisk 26 again at all, the current version already is 26.2 btw.
Cheers
Toscha
Click to expand...
Click to collapse
Good question. I'm a noobie and thought that Magisk provided more features or capabilities. But maybe I've been wasting my time on something I don't need!
Fytdyh said:
try magisk canary or magisk delta
Click to expand...
Click to collapse
Thanks, but it looks like canary only supports 64 bit systems. What is the difference between delta and the official Magisk? And if my tablet is already rooted, do I even need Magisk?
You don't need the Magisk app any longer. But honestly, as long as it is rooted I simply wouldn't touch it anyway. Just leave as it is.
The newer Magisk version is rather suitable for Android 13 and younger. Doesn't need to bother you and for < A12.
Cheers
Toscha
toscha42 said:
You don't need the Magisk app any longer. But honestly, as long as it is rooted I simply wouldn't touch it anyway. Just leave as it is.
The newer Magisk version is rather suitable for Android 13 and younger. Doesn't need to bother for you and < A12.
Cheers
Toscha
Click to expand...
Click to collapse
Well, that's great to hear, I don't have to mess with it any longer. Thanks so much Toscha!
Tom
Now I remember why I was trying to install Magisk I can't install Netflix from the play store (message says will not run on my device). But I found some comments here (https://forum.xda-developers.com/t/...m-t705-sm-t800-sm-t800-sm-p600.4270943/page-6) who used Magisk to get it to run:
mp1967 said:
I installed magisk v23 via twrp (renamed apk to zip first),
rebooted, used magisk modules liboemcrypto disabler and magiskhide props config and rebooted, enabled magisk hide
installed netflix app via sideload and tick box in magisk to hide this app
went to netflix account to enable HD streaming for the device
Click to expand...
Click to collapse
I tried searching that thread for any more clues, but I can't get the "Search this thread" tool to work and didn't want to read 73 pages of posts. Anyway, do you know another way to get Netflix to work on LineageOS 17.1?
I've Netflix installed on my SM-T805 (LineageOS 18.1) without any Magisk modules. Runs fine.
Cheers
Toscha
Thanks again, Toscha. I wonder if it is because I only have LineageOS 17.1, the latest available for my T700. Do you remember if you downloaded it from apkmirror?
Actually I'm not sure. At least in the settings for Netflix app it says 'Installed from Play Store'. Not sure though whether it's the same for apps installed from APKmirror.
I did that a while just for test purpose. Not using Netflix actively on the tablet. And yes, it might have been from APKmirror.
Cheers
Toscha
I appreciate all your help, Toscha. I'll try some other versions....though I think the one I used should work on the T700 processor.
Much obliged!
Hey Toscha, just wanted to let you know I got it to work. I was using TWRP to install but all I needed to do was use APKmirror installer app! All is good now
Tom
Glad it worked finally!
Cheers
Toscha