[ROM][UNOFFICIAL] LineageOS 19.1 for Nexus 5 (hammerhead) [DISCONTINUED]

[ROM][UNOFFICIAL] LineageOS 19.1 for Nexus 5 (hammerhead) [DISCONTINUED] - Nexus 5 Original Android Development

LineageOS 19.1 is a free, community built, aftermarket firmware distribution of Android 12.1 (S), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
The source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Known bugs:
There may be a lot of bugs because these builds are experimental!
Downloads:
ROM: https://sourceforge.net/projects/hammerhead-lineageos/files/19.1/
GAPPS: https://bitgapps.github.io/latest.html
Credits:
Many thanks to the LineageOS and LineageOS-UL team and all the contributors out there in the community
Contributors:
z3DD3r
Source Code:
Device tree: https://github.com/z3DD3r/android_device_lge_hammerhead/tree/lineage-19.1
Kernel tree: https://github.com/z3DD3r/android_kernel_lge_hammerhead/tree/lineage-19.1
Vendor tree: https://github.com/z3DD3r/android_vendor_lge/tree/lineage-19.1
Android version: 12.1.0 (S)
Kernel version: Linux 3.4.113
SELinux: Enforcing
Status: Beta
Created 2022-11-20
Last Updated 2023-02-20

ROM Installation
To install rom you should increase the /system partition size
This can be done for example with TWRP HH.R
[RECOVERY][UNOFFICIAL] TWRP HH for Nexus 5 (hammerhead)
TWRP HH for Nexus 5 About: TWRP is an open source, community project. TWRP development is done by roughly 4 people at this point. We also have a large support community with many people who are willing to answer questions and help people with...
forum.xda-developers.com
GAPPS Installation
LineageOS Team have recommendations about GAPPS
My recommendation is BiTGapps for Android 12.1.0 for arm devices.
Google apps should be installed via recovery immediately after installing LineageOS. If you reboot into LineageOS before installing Google apps, you must factory reset and then install them, otherwise expect crashes.

ROM Build
To make your own build of LineageOS 19.1 please use my trees with manifests from LineageOS-UL github.

Reserved

Thanks for keeping building for this beloved device.

Thanks for your great work!
Do you think I can go without resizing if I don't want to use gapps?

I think that isnt possible on A11 maybe even A10 anymore

SirRGB said:
I think that isnt possible on A11 maybe even A10 anymore
Click to expand...
Click to collapse
Thanks for your fast reply. Then I will resize

New build (20230219) with february security patch is out!
Please don't ask me for OTA or any bug fixes.
I don't have Nexus 5 anymore and can't provide proper support.

Just to let you know...
19.1-20221126 is a DREAM. Very fast, extreme battery life, everything works (camera via OpenCamera)
19.1-20230219 - not that fast, long app launch, very short battery life (missing deep sleep mode, imo), camera unusable (stutter typical for Nexus 5 custom roms)
18.1 was almost as good as the 19.1-20221126
20.0 is like 19.1-20230219
I don't use any kind of gapps.
Thank you for keeping this legendary device alive, even though you don't have one

New build (2023-05-12) with May security patch is out!
PS: Android 13 and Android 12 roms can't pass new Play Integrity protection. That means that your device will be not certified in Play Market. The only workaround for now is Magisk with it modules. If someone know how to fix it on rom side (without Magisk) then please let me know.

Related

[ROM][Official][Nightly] LineageOS 16.0 for Xiaomi Mi Note 3

LineageOS is a free, community built, aftermarket firmware distribution of Android 9.0 (Pie), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Important information:
This thread is for LineageOS 16.0 builds for Xiaomi Mi Note 3. The following will not be supported here:
Custom kernels
Mods
Xposed
We don't support Xposed and any logcat which includes a Xposed module will be ignored. You're kindly invited to not report bugs if you:
Flashed a custom kernel
Installed or did mods from untrusted sources
Modified system files
Known bugs:
To be discovered
Tips:
You need at least MIUI10 CN stable firmware, otherwise you'll get error 7 when installing the zip.
Installation:
First time flashing LineageOS 16.0 on your device, or coming from another ROM?
Download the zip(s)
Install a compatible Recovery (Official TWRP 3.3 or higher is highly recommended: https://twrp.me/xiaomi/xiaomiminote3.html)
Perform a nandroid backup of your current ROM (Optional)
Wipe data/factory reset
Flash LineageOS
Optional: Install the Google Apps addon package
Reboot
Source code:
https://github.com/lineageos
Credits:
LineageOS Team & Contributors
Code Aurora Forum
......
Download:
Official: https://download.lineageos.org/jason
Last unofficial: https://androidfilehost.com/?fid=1395089523397897139
Unofficial SU addon: https://androidfilehost.com/?fid=11410963190603887268
XDA:DevDB Information
LineageOS, ROM for the Xiaomi Mi Note 3
Contributors
dianlujitao
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
Version Information
Status: Alpha
Created 2018-10-22
Last Updated 2019-04-16

Changelog
2018/10/22:
Initial release
2018/10/23:
Fixed video recording
2019/1/12:
Sync latest source
VoLTE
Power-off alarm
Miracast
Display density changed to 420
SELinux enforcing
Miscellaneous bug fixes & optimizations & cleanups
Update: Fix fingerprint sensor for fpc users
2019/1/28:
Sync latest source
Fix adaptive brightness level not persistent after unblank in dark environments
Fix GCAM front camera HDR
Fix manual network selection
Miscellaneous bug fixes & optimizations
2019/2/2:
Sync latest source
Custom camera HAL based on LA.UM.7.2.r1-05800-sdm660.0, report if you found regressions
Fix FP sensor keep waiting for authentication after unlock in non-FP ways
2019/2/12:
Sync latest source
Expose aux camera to apps
Enable VNDK run-time enforcement for Treble compliance
Update kernel to LA.UM.7.2.r1-05900-sdm660.0
Miscellaneous bug fixes
2019/2/12:
Sync latest source
Expose aux camera to apps
Enable VNDK run-time enforcement for Treble compliance
Update kernel to LA.UM.7.2.r1-05900-sdm660.0
Miscellaneous bug fixes
2019/2/20:
Sync latest source
Fix rear camera for WeChat video call
Fix bluetooth for GSI
Fix GSI not booting with SELinux enforcing
Fix ril for AOSP master GSI
Fix video lagging for whatsapp
Miscellaneous bug fixes
Future:
https://download.lineageos.org/jason/changes/

前排支持电大！！！牛皮

Very nice to see your work here again. @dianlujitao

Thanks For your Hard Work @dianlujitao

Thanks for the great work, @dianlujitao

最新开发版可以刷入吗？请指点，谢谢。
Google Translate:
Can the latest development version be brushed in? Please give pointers, thank you.

Nice !

thanks man, this is great to see

Working pretty great so far.
Thumbs up bro, u nailed it again.
Did any1 enabled successfully webdingo port?

朱雪林 said:
最新开发版可以刷入吗？请指点，谢谢。
Click to expand...
Click to collapse
可以，我四清都刷成功了
Google Translate:
Yes, I have successfully brushed all four

panarron said:
可以，我四清都刷成功了
Click to expand...
Click to collapse
相机是什么。小米相机+google相机吗。再问一下小米相机的话前置会不会花屏
Google Translate:
What is the camera. Millet camera + google camera. If you ask the millet camera again, will the front panel be used?

Its not china forum!!

Thank you for your work! Everything working fine so far.

朱雪林 said:
最新开发版可以刷入吗？请指点，谢谢。
Click to expand...
Click to collapse
panarron said:
可以，我四清都刷成功了
Click to expand...
Click to collapse
随风意 said:
相机是什么。小米相机+google相机吗。再问一下小米相机的话前置会不会花屏
Click to expand...
Click to collapse
Please edit your posts ans add English as stated in the forum rules
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature).
Click to expand...
Click to collapse
Thanks

Found some minor bug in Los 16:
- Accent color does not work
- network traffic indicators doesn't work
- audio equaliser doesn't work

Minor bugs:
WiFi don't turn on after reboot.
Battery option of balance and performance mode,shuts down after clicking it.
I think light sensor is not working properly; the auto britness thing is buggy

It seems need disable phone encryption before flash this ROM?
I flash this ROM with phone encryption, then, can not boot.

After unlocking with PIN, home button keeps acting like fingerprint sensor until you satisfy it with the right finger.

NikolayNIK said:
After unlocking with PIN, home button keeps acting like fingerprint sensor until you satisfy it with the right finger.
Click to expand...
Click to collapse
Do you rub it or just gently glide over to satisfy it ?

[ROM][9.0.0_r21] LineageOS-16.0 [lux] [UNOFFICIAL]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is an experimental build
I dont have a moto x play (lux) . so report bugs with adb logs
Hey ,
Welcome to the goodness of Pie This topic will be dedicated to our bring up of Pie for Moto X play
LineageOS is a free, community built, aftermarket firmware distribution of Android 9.0 (Pie), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.

Disclamier:
* Include <std_disclaimer.h>
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
What's working?
RIL
Storage
4G
GPS
Battery LED
Offline charging
What's not working?
VoLTE
Camera
WiFi
Selinux Enforcing
Other minor Bugs Maybe :angel:
Downloads:
Download [lux] (sept-vendor twrp required)
Vendor enabled twrp is required from here
DONATIONS : Paypal
Credits:
AOSP
Open Gapps
LineageOS
TheMuppets
XDA:DevDB Information
[ROM][9.0.0_r21] LineageOS-16.0 [lux] [UNOFFICIAL], ROM for the Moto X Play
Contributors
althafvly
Source Code: https://github.com/MOTO-M8916
ROM OS Version: 9.x Pie
Based On: Lineage
Version Information
Status: Alpha
Created 2019-01-09
Last Updated 2019-07-14

Reserved

Thanks for this one! Not many new ROMs are coming this way nowadays, now we got a fresh pie straight out of the oven

Thanks For This... One More Attempt to use MXP??

Please give proper credits to squid. Who's device tress you are using.

methuselah said:
Please give proper credits to squid. Who's device tress you are using.
Click to expand...
Click to collapse
There is no need to fight here. My work is open source and everyone is free to make use of my commits. @althafvly is a friend of mine, and the trees he used are his own, with help from the community, including some of my commits. Asim has done great work in keeping the Motorola msm8916 family going with new versions of Android while I've been busy with other things.
We may have different approaches, and different standards and practices for official LineageOS trees, but I fully respect the work of Asim.

squid2 said:
There is no need to fight here. My work is open source and everyone is free to make use of my commits. @althafvly is a friend of mine, and the trees he used are his own, with help from the community, including some of my commits. Asim has done great work in keeping the Motorola msm8916 family going with new versions of Android while I've been busy with other things.
We may have different approaches, and different standards and practices for official LineageOS trees, but I fully respect the work of Asim.
Click to expand...
Click to collapse
Thanks brother for your support. For others, I respect all devs who helped me in developing for msm8916 family. I did used squid's commits and my commits for the development of los16 . i thank squid for recent updates for lux. I don't even have a lux, so it was really helpful .im just compiling rom for lux because i saw lux people are not having a fully working lineage oreo or pie build.
If no one want any build from me then, feel free to say
Im ready to quit
Sorry for my bad English

@althafvly No Bro Please Don't....There is no stable oreo roms yet and forget about pie ... You are the savior who thought for us... Please! Please! Please! Continue this one last time for our device...We will be thankful to forever... Please ? ?

althafvly said:
Thanks brother for your support. For others, I respect all devs who helped me in developing for msm8916 family. I did used squid's commits and my commits for the development of los16 . i thank squid for recent updates for lux. I don't even have a lux, so it was really helpful .im just compiling rom for lux because i saw lux people are not having a fully working lineage oreo or pie build.
If no one want any build from me then, feel free to say
Im ready to quit
Sorry for my bad English
Click to expand...
Click to collapse
Hey, I partly agreed with @methuselah because I kinda missed the coloborator/thanks section... But other than that, there's nothing wrong, as @squid2 said, it's open source.
So please, keep the "make" up mate! :highfive:

@althafvly,
I have not tried the Pie Rom yet, but I think you are doing a great job! I use the oreo rom of you and am very excited. Please keep it up. Many thanks for your effort

Definitely don't stop, it is awesome to have a pie build for lux- there is almost no dev keeping this branch alive, you are most welcome!

Internet connection does not work with data packets.
I'm not getting impatient, I just let you know. I'll be wait, you're welcome. [/CENTER]
althafvly said:
This is an experimental build
I dont have a moto x play (lux) . so report bugs with adb logs
Hey ,
Welcome to the goodness of Pie This topic will be dedicated to our bring up of Pie for Moto X play
LineageOS is a free, community built, aftermarket firmware distribution of Android 9.0 (Pie), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Disclamier:
* Include <std_disclaimer.h>
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
What's working?
RIL
Storage
4G
GPS
Battery LED
Offline charging
What's not working?
VoLTE
Camera
WiFi
Selinux Enforcing
Other minor Bugs Maybe :angel:
Downloads:
Download [lux] (sept-vendor twrp required)
Vendor enabled twrp is required from here
DONATIONS : Paypal
Credits:
AOSP
Open Gapps
LineageOS
TheMuppets
XDA:DevDB Information
[ROM][9.0.0_r21] LineageOS-16.0 [SEP-VENDOR] [lux] [UNOFFICIAL], ROM for the Moto X Play
Contributors
althafvly , squid2, Alberto97
Source Code: [url]https://github.com/MOTO-M8916[/URL]
ROM OS Version: 9.x Pie
Based On: Lineage
Version Information
Status: Alpha
Created 2019-01-09
Last Updated 2019-01-09
Click to expand...
Click to collapse

I have two moto x play and I test this rom. There are a lot of bug again but you did a really good job to have android 9.0.

If you want it's possible for me for help in the development of this rom with my second moto x play. But i don't understand anything in development language. It's possible for me to give the logs if you explain me how.
The install open gapps android 9.0 no works fine for me. The phone crah after start

seems to run clean and fast for what it does, nicely done.

TEST BUILD
lineage-16.0-20190127-UNOFFICIAL-lux
https://androidfilehost.com/?fid=11410963190603909471

My sources are up here .. anyone can build and try fixes
Heres my manifest
https://github.com/MOTO-M8916/android_manifest

Heres my manifest
https://github.com/MOTO-M8916/android_manifest[/QUOTE]
there is a small error . /setup/android_build_env.sh should be . /setup/android_build_env.sh
i know it seems petty to bring it up, but .......
Once past that, and everything is installed, the "brunch lux" starts, with a few warnings, but carries on, i guess now I have to start learning loads of stuff
failed, after long hours, with "ninja failed with: exit status 1
seems I need to install m4 and ninja build, still failed with ninja failed, So i deleted everything and started again with m4, ninja-build, updated etc running brunch lux again.
Its only when one starts playing with these builds that one truly realises the work the devs put in, to keeping our stuff working, my admiration grows.
xargs: /mnt/WD3/scripts/lineage/out/host/linux-x86/bin/hiddenapi: terminated by signal 4
[ 81% 11299/13844] //frameworks/base/libs/hwui:libhwui link libhwui.so
Warning: request a ThreadPool with 1 threads, but LLVM_ENABLE_THREADS has been turned off
[ 81% 11300/13844] //art/runtime:libart link libart.so
Warning: request a ThreadPool with 1 threads, but LLVM_ENABLE_THREADS has been turned off
ninja: build stopped: subcommand failed.
16:08:46 ninja failed with: exit status 1
#### failed to build some targets (56:10 (mm:ss)) ####

i have stock N rom in moto x play.Now i flashed the vendor unlocked twrp recovery and i want to flash unofficial lineage OS 16,so please tell what should i wipe before installing rom.Do i have to wipe vendor partition or just data and cache?
Please someone describe the step by step process for lineage os 16.

rohilmogal77 said:
i have stock N rom in moto x play.Now i flashed the vendor unlocked twrp recovery and i want to flash unofficial lineage OS 16,so please tell what should i wipe before installing rom.Do i have to wipe vendor partition or just data and cache?
Please someone describe the step by step process for lineage os 16.
Click to expand...
Click to collapse
I wiped all: System, Vendor, Cache and Data.
First time TWRP wont find the cache partition probably as it is remapped so it will throw an error but from the next instances, it shall continue normally.

[ROM][11][UNOFFICIAL] [4.9] LineageOS 18.0 [YSL][29.10.2020]

I installed the firmware using the Sky Hawk Recovery Project. The system has booted up. Rebooted to install gapps. Instead of SHRP, I got into Recovery LineageOS 18.0 with limited capabilities. I flashed TWRP via Fastboot. Booted and configured the system. Mostly it turned out to be working. Auto brightness seems to be buggy, but I don't remember the details. All this happened late at night on October 29th. After rebooting, I ended up in Recovery LineageOS 18.0 again. Rebuilt TWRP again and returned to Havoc OS v3.9. This is the best firmware for YSL in my opinion. Sadly 4.0 is not expected, but thanks for your hard work.

Surprised
Thank you so much, i upgraded from LOS 17.1 to this new one yesterday. At first i got frustrated because after flashing, the rom got stuck at recovery boot. I realised that the android system of LoS 17.1 and this LoS 18 are different haha. Los 18 had lates android 11 apparently. Then the system suggested me to factory reset data, so i let go my all data to be deleted. After that it rebooted again and surprisingly it landed to the home screen. It means it worked. Until now I'm still enjoying and looking for the features. The bug i found for now is when i charge the phone in shutdown mode. There is no charging animation and redmi logo appears.

Is this a 64-bit ROM?

rvcjfrvr said:
Is this a 64-bit ROM?
Click to expand...
Click to collapse
same question? Have u installed it plz tell

Mr Kartik said:
same question? Have u installed it plz tell
Click to expand...
Click to collapse
Yes, it is.

rvcjfrvr said:
Is this a 64-bit ROM?
Click to expand...
Click to collapse
Yes it is.

Mr Kartik said:
same question? Have u installed it plz tell
Click to expand...
Click to collapse
Yes it is 64 bit and I have installed it on my redmi Y2. Are you having prblms in installing let me know

mahajant99 said:
Code:
/*
I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
Please do some research if you have any concerns about features included in the products you find here before flashing it!
YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Your warranty will be void if you tamper with any part of your device / software.
Same statement for XDA.
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 9 (pie), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
What's working :
Boots
RIL (Calls, SMS, Data)
Fingerprint
Wi-Fi
Bluetooth
IR camera
Camera
Camcorder
Video Playback
Audio
Sensors
Flash
LED
GPS/GNSS
VoLTE
Known issues:
You tell me (None)
Instructions :
Download the ROM, Magisk (Optional) from the links above.
Wipe System, Data, Dalvik, Cache.
Flash the ROM, Magisk (Optional).
Reboot and Enjoy.
Download :
UNOFFICIAL Build: Sourceforge
Credits:
Eddie Morceri
Nolen Johnson
Rashed Abdel-Tawab
Ashwin RC
Moshe Barash
Marc "ThE_MarD" Bourgoin
Amulya Bhardwaj
Peter Cai
Lineage Team
AospExtended Team
Wang Han
XDA:DevDB Information
LineageOS 18, ROM for the Xiaomi Redmi S2
Contributors
mahajant99
Source Code: https://github.com/mahajant99/kernel_xiaomi_msm8953-ysl
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Stable Release Date: 2020-10-29
Created 2020-10-29
Last Updated 2020-10-29
Click to expand...
Click to collapse
Hey Devs I wasn't able to test your Build because in my phone the touchscreen wasn't responding right from the beggining.

twrp off mising

mahajant99 said:
Code:
/*
I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
Please do some research if you have any concerns about features included in the products you find here before flashing it!
YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Your warranty will be void if you tamper with any part of your device / software.
Same statement for XDA.
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 9 (pie), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
What's working :
Boots
RIL (Calls, SMS, Data)
Fingerprint
Wi-Fi
Bluetooth
IR camera
Camera
Camcorder
Video Playback
Audio
Sensors
Flash
LED
GPS/GNSS
VoLTE
Known issues:
You tell me (None)
Instructions :
Download the ROM, Magisk (Optional) from the links above.
Wipe System, Data, Dalvik, Cache.
Flash the ROM, Magisk (Optional).
Reboot and Enjoy.
Download :
UNOFFICIAL Build: Sourceforge
Credits:
Eddie Morceri
Nolen Johnson
Rashed Abdel-Tawab
Ashwin RC
Moshe Barash
Marc "ThE_MarD" Bourgoin
Amulya Bhardwaj
Peter Cai
Lineage Team
AospExtended Team
Wang Han
XDA:DevDB Information
LineageOS 18, ROM for the Xiaomi Redmi S2
Contributors
mahajant99
Source Code: https://github.com/mahajant99/kernel_xiaomi_msm8953-ysl
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Stable Release Date: 2020-10-29
Created 2020-10-29
Last Updated 2020-10-29
Click to expand...
Click to collapse
Even in power saving mode, there is an error in the 2ghz rom, the CPU clock speeds, other users can install accordingly or the developer friend can make the necessary adjustments.

[UPDATED][04/08/2021][ROM][11.0] LineageOS 18.1 for realme C11 (RMX2185) [UNOFFICIAL]

TechyMinati said:
LineageOS is a free, community-built, aftermarket firmware distribution of Android 11, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
What's working :
Audio
Bluetooth
Camera
EGL
GPS
RIL (Calls, SMS, Data)
Sensors
Video Playback
Wi-Fi
MTP
VoLTE
Everything is Working Except following Bugs
Known issues/Bugs :
Double Tap to Wake
VoWiFi
Selinux is permissive(Temporary. Will soon make it enforcing)
You tell me the rest
Reporting Bugs
DO NOT Report bugs if you're running a custom kernel or you installed any root implementation
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /sys/fs/pstore/console-ramoops and /sys/fs/pstore/dmesg-ramoops-0. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless). Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. Any bug not reported in the bug report format below may be ignored.
Instructions
Have custom recovery installed
Download the latest LineageOS Build and GApps(Optional)
Wipe Data
Flash the ROM and GApps(Optional)
Enjoy the rom
Downloads : lineage-18.1-20210225-UNOFFICIAL-RMX2185.zip
Credits
LineageOS team
@Agent_fabulous for much help & begonia trees as reference
@SparXFusion
@TheMalachite
@M.A.P
@henloboii
@CyberJalagam
@iamlordutkarsh
& All People Who helped me in a way or Other !
Source Code
ROM: https://github.com/LineageOS
Device Tree: https://github.com/techyminati/android_device_realme_RMX2185
Vendor Blobs: https://github.com/techyminati/proprietary_vendor_realme_RMX2185
Kernel Source: https://github.com/techyminati/android_kernel_realme_mt6765
If You Liked My Work, Press Thanks On This Thread !
Click to expand...
Click to collapse
bro everything is working fine but having issue in bluetooth and wifi,wifi and bluetooth addresses are unavialable in settings.
if possible try to fix

I couldn't connect to any wifi network. Network list doesn't even show up and wifi automatically closes

Will this work on realme c15?

Wakohoxi08 said:
Will this work on realme c15?
Click to expand...
Click to collapse
I don't think so. It was made specifically for realme c11/c12 devices. You might brick your phone after flashing it. Be warned.

Mahmudur_Rashid said:
I don't think so. It was made specifically for realme c11/c12 devices. You might brick your phone after flashing it. Be warned.
Click to expand...
Click to collapse
Okay thanks

does call audio works?

Wakohoxi08 said:
Will this work on realme c15?
Click to expand...
Click to collapse
non qualocom edition works fine

Awesome that you ported LineageOS to the Realme C11/C12. I've been testing your UI 2.0 August 13 build version on a C12 RMX1289. Link:
Release LineageOS 18.1 for realme C11 (RMX2185) · techyminati/releases
LineageOS 18.1 - RMX2185 Changelog : Hotfix Build August Security Patch Addressed all Neverallows, Hence this build is a user build ( previously was userdebug ) Build is Encrypted & SELinux is S...
github.com
Some testing feedback I have:
I tested installing over firmware version ending in C.06 to see what happens and it broke Wi-Fi. So I reinstalled over C.05 to fix that, but only have 2.4GHz Wi-Fi (could be a 2.4GHz-only device anyway, If I use stock OS again then I'll check and report back here again)
On the installation I'm using now (which was installed over C.05), I noticed A2DP isn't working but Bluetooth telephone calls is working.
Screen brightness setting seems to be too low after a restart.
Not sure if this is specific to this port of LineageOS, but I have a SIM plan which uses 3G for calls and LTE for data when not on a call. Sometimes I switch the phone to LTE only mode to prevent calls from coming in If I wish to not be disturbed. (The setting is under *#*#4636#*#*). The issue I noticed is the device doesn't stay in LTE only mode and reverts automatically back to "GSM/WCDMA/LTE prl" mode.
I̶ ̶h̶a̶v̶e̶n̶'̶t̶ ̶d̶o̶n̶e̶ ̶a̶n̶y̶ ̶l̶o̶g̶c̶a̶t̶s̶,̶ ̶b̶u̶t̶ ̶I̶'̶l̶l̶ ̶h̶a̶p̶p̶i̶l̶y̶ ̶d̶o̶ ̶t̶h̶e̶m̶ ̶a̶t̶ ̶y̶o̶u̶r̶ ̶r̶e̶q̶u̶e̶s̶t̶ [edit: logcats posted below]

Here is a logcat taken just after toggling the "Media audio" switch a couple of times while connected to a Bose bluetooth speaker and playing audio in a browser. The audio continues to come from the phone speaker.

Logcat taken just after toggling "LTE only" mode a couple of times. Phone reverts to "GSM/WCDMS/LTE (PRL)" mode

Ritesh Panwar said:
Recommend you to flash Pixel experience as it is best.
I have tried all the ROMs in this thread including linage OS, cipher OS, wave OS etc. all has WiFi and Bluetooth issues accept pixel plus UI which I am using currently this has quite decent performance and good enough for daily usage.
Click to expand...
Click to collapse
Pixel Experience comes with GApps. I became interested in custom operating systems because I wanted to get rid of GApps, so I'll stick to TechyMinati's (who is the OP on this thread) CipherOS builds. https://sourceforge.net/projects/cipheros/files/Cipher-3.x/GRAVITY/RMX2185/

Ritesh Panwar said:
Have you tested it, is there any bugs please tell me some information about it.
Could you please tell me that can I flash this to my device because in cipher OS 2.0 it needs device into Realme UI 2.0 and this device has never got such update for RUI 2.0
It's still running on RUI 1.0 but currently I am Pixel Plus UI.
Device info.
Realme c11
Model no. RMX2185
Thanks in advance
Click to expand...
Click to collapse
Ritesh Panwar said:
Have you tested it, is there any bugs please tell me some information about it.
Could you please tell me that can I flash this to my device because in cipher OS 2.0 it needs device into Realme UI 2.0 and this device has never got such update for RUI 2.0
It's still running on RUI 1.0 but currently I am Pixel Plus UI.
Device info.
Realme c11
Model no. RMX2185
Thanks in advance
Click to expand...
Click to collapse
It's the best working build I'm aware of. I think even VoLTE is up and running now. Here's the changlog.txt https://github.com/CipherOS/OTA/blob/twelve-L/changelog/changelog_RMX2185.txt#L7
Keep a stock firmware image ozip file on your HDD if you want to revert back to RUI1

Ritesh Panwar said:
Bro I flashed it yesterday but it fails after few seconds of progress with lot of errors
Click to expand...
Click to collapse
I feel I'm hijacking this thread with a slightly off topic discussion about a different ROM (although from the same developer).
If you want to flash RUI2.0 ROMS, see ┤Mod Edit├┤Telegram link removed├ to learn how to unofficially upgrade your firmware first.
Probably best to start a new thread if you wan't to ask more about installing CipherOS.

Ritesh Panwar said:
Site is not working
I want to upgrade my firmfare
Click to expand...
Click to collapse
Unfortunately, the link requires a Telegram account

TechyMinati said:
LineageOS is a free, community-built, aftermarket firmware distribution of Android 11, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
What's working :
Audio
Bluetooth
Camera
EGL
GPS
RIL (Calls, SMS, Data)
Sensors
Video Playback
Wi-Fi
MTP
VoLTE
VoWiFI
SElinux is Enforcing
Build is Encrypted
Build is Signed Using Private Keys
Everything is Working Except following Bugs
Known issues/Bugs :
You tell me the rest
Changelog [Updated 04/08/'21] :
July Security Patch
Fixed Double Tap to Wake
Signed Build With Private Keys ( release-keys )
Optimised Performance & Fixed Some Bugs
SElinux is Enforcing Now , Build is Encrypted too
Reporting Bugs
DO NOT Report bugs if you're running a custom kernel or you installed any root implementation
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /sys/fs/pstore/console-ramoops and /sys/fs/pstore/dmesg-ramoops-0. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless). Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. Any bug not reported in the bug report format below may be ignored.
Instructions
Have custom recovery installed
Download the latest LineageOS Build and GApps(Optional)
Wipe Data
Flash the ROM and GApps(Optional)
Enjoy the rom
Downloads :
lineage-18.1-20210723-UNOFFICIAL-RMX2185.zip [Latest Build]
lineage-18.1-20210421-UNOFFICIAL-RMX2185.zip
lineage-18.1-20210225-UNOFFICIAL-RMX2185.zip
Credits
LineageOS team
@Agent_fabulous for much help & begonia trees as reference
@SparXFusion
@TheMalachite
@M.A.P
@henloboii
@CyberJalagam
@iamlordutkarsh
& All People Who helped me in a way or Other !
Source Code
ROM: https://github.com/LineageOS
Device Tree: https://github.com/techyminati/android_device_realme_RMX2185
Vendor Blobs: https://github.com/techyminati/proprietary_vendor_realme_RMX2185
Kernel Source: https://github.com/techyminati/android_kernel_realme_mt6765
If You Liked My Work, Press Thanks On This Thread !
Click to expand...
Click to collapse
I wanted to ask u that can u make custom rom of android 12 for RMX3231[Realme c11 2021] ?

Will this work on redmi 9c ?

[ROM][OFFICIAL][ginkgo][11] AICP r16.1 for Redmi Note 8 / 8T

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!
Until Android Lollipop, the ROM has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LOS), we became LineageOS based with some tweaks from AOSP and then changed to be based on the "Ground Zero Open Source Project" (GZOSP) for Android Pie.
We changed again for Android Q-R with a base of AOSP repositories and some additions from LineageOS for device-specific repositories.
If there are any bugs we will sort them out if it concerns our codebase. This ROM isn't LineageOS supported, so there is no need to report errors/bugs to them!!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Feature list (rough overview)
In the beginning we would like to thank:
GZOSP team
LineageOS & CM (R.I.P.) team
@maxwen and the rest of the OmniRom team
DU team
Resurrection Remix team
AOSiP team
Community
@LorD ClockaN
@eyosen
@semdoc
@SpiritCroc
@wartomato
@Miccia
plus the rest of the crazy bunch that we call "team"
We are paying for servers that build weeklies and everything that comes with this, so EVERY DONATION will really be appreciated and be used to cover those expenses.
Thank you!!
Latest Stable Release Version 16.1
Download link: https://dwnld.aicp-rom.com
Please note that official builds will be deleted from our servers every month due to maintenance services.
Starting with AICP 15 we will be storing a copy of the most recent release here: https://media.aicp-rom.com/vault/.
Full Changelog link: https://dwnld.aicp-rom.com/
(Just click the changelog button next to the download link in the list of builds available for your device)
Google Apps:
We recommend MindTheGapps as it has been thoroughly tested and it works well with the ROM, some other minimal GApps packages still have issues, however feel free to try other GApps if you want to, just try MindTheGapps if you have any GApps related issues
MindTheGapps: https://androidfilehost.com/?w=files&flid=322935
Mirror: http://downloads.codefi.re/jdcteam/javelinanddart/gapps
You tell...
FAQ:
Before using the ROM:
Q. Can I have an ETA for the next build?
A. Yes, just look here to see what day your device is built on.
Q. Does this ROM support custom kernels officially?
A. No. You can still use them, but the discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter while using them!
Q. Does this ROM include GApps or do I have to flash them separately?
A. No, we do not include prebuilt GApps, because of possible licensing issues with Google Software and because some users do not want GApps preinstalled as they want to use alternative services like MicroG or just prefer flashing a GApps "flavor" of their liking.
Q. Does this ROM use the camera or gallery app from stock?
A. It depends on the device. In most cases these apps include proprietary libs/code and cannot be included in the device trees on Github or we risk having the ROM banned from Github. In this case, we might try to make them installable (separate from the ROM zip), or we might provide a version of these apps with the ROM that doesn't include any proprietary libs. It's also sometimes the case that these apps are simply not included because we didn't feel the need to do so for the device in question.
Q. Does this ROM have Extended/Scrolling screenshot?
A. No, extended screenshot was implemented using an app extracted and modified from manufacturer firmware/system images and is proprietary as well. It led to the closing of many ROM's sources on GitHub.
Q. Does this ROM have FaceUnlock?
A. No, FaceUnlock was also an app extracted and modified from some manufacturers. Even Google removed the Trusted Face (FaceUnlock) feature for security reasons on Android 9.0/10.x. Adding the modified feature did the same to ROM sources as described above.
Q. Can you add (insert favorite weather provider)?
A. No, we cannot add more weather providers as the implementations change and we (the ROM) now have to pay for most services, and that is not cheap, so we decided to use the best free service that we could find, the only way to add your own is for users to apply for their own API key to use their preferred service.
Q. Does this ROM have private official builds with the above proprietary libs included?
A. No, we believe in open source software, this way users know what's in the build and can replicate it themselves, all official builds are built on our build servers using the public sources from github and no one can (or would) add their own private sources to the build.
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the flashing instructions...
Q. Can the builds be dirty flashed over each other?
A. Yes, this is the usual behavior on flashing a new official build by (or using) the build-in updater service.
Q. How do I 'dirty flash' builds?
A. Wipe the System, Cache, and ART/Dalvik cache. Flash the ROM, GApps (only needed if you wipe the system), your preferred root solution, and reboot. Or just use the OTA app to perform that task for you.
Q. How do I flash kernel builds?
A1. If it's a .img file, boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot" as the destination, then swipe to flash, then go back to the install screen and install your root method again, if you don't want to lose root and reboot.
A2. If it's a flashable ZIP, you can flash it together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue if you don't want to lose root. Now swipe to flash and reboot afterward.
Using the ROM:
Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat AND the model name. (Note: Please just link the logcat from your GDrive, Dropbox, etc. Do not post the content here. Thanks.)
Q. How do I get a logcat, what type should I get, and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog (Root needed).
A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the others section on the AICP Extras main page.
The ROM should contain everything you need to enjoy Android R. You don't need to install any Add-ons, simply download the latest ROM and GApps, then follow the flashing instructions and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM zip file.
It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup (or with any backup/restore app) as this can cause stability issues that are very hard to debug, restoring regular apps is fine though.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
How to flash for the first time:
(Again: Don't do it if you don't know!)
1. Download the ROM and GApps and transfer them to your device.
2. Boot to recovery (OrangeFox Recovery recommended).
3. Wipe the System, Vendor, Cache, and Data (you might need to format the data partition!).
4. Flash the ROM zip file.
5. Flash the GApps (optional, needed for e.g. Google Playstore to work)
6. Reboot and set up your device.
7. Reboot back into TWRP recovery.
8. Flash the root solution of your choice (optional).
9. Reboot your device.
The procedure may vary from device to device and is a bit different on system updates!
The ROM has GApps persistence in between dirty flashes, so you only have to flash them once! This might differ on AvB Devices.
Currently supported Root Solution:
Magisk stable
Magisk versions >= 20.4 don't usually need to be flashed on every dirty flash.
Depending on the device, you may need to flash it every time, unless your maintainer says otherwise, you should be fine.
PREREQUISITE FOR OTA ("Over-The-Air" Updates):
TWRP recovery is needed to be able to flash using the built-in OTA app.
Please make sure that you are on the latest OrangeFox recovery, keep in mind that this could also be an unofficial version!
On encrypted devices, you will have to enter your PIN/password in TWRP before the process starts.
If you want to contribute to AICP, or if you want to see what is being worked on/merged, feel free to visit our Gerrit code review system. (Link is at the bottom!!!)
Kernel source:
https://github.com/AICP/kernel_xiaomi_ginkgoDevice tree source:
https://github.com/AICP/device_xiaomi_ginkgoVendor source:
AICP/proprietary_vendor_xiaomi
Contribute to AICP/proprietary_vendor_xiaomi development by creating an account on GitHub.
github.com
ROM & Additional links:
AICP's Homepage
AICP Gerrit Code Review
AICP sources on Github
AICP Download page for official builds and media content
AICP Discord Community
AICP Telegram channel for server notifications on official builds
Contributors:
@Adithya R
@madmax7896
Information:
ROM OS Version: 11.x
Kernel: Linux 4.14
ROM Firmware required: Latest Firmware from MIUI 21.4.28 and up
Status: STABLE
Release Date: 05-20-2021
You want to see a "normal" night at the "DEV office", click here!!

May 20, 2021
- Initial Build

May 28, 2021
Changelog:
• Fixed Battery Capacity Values
• Switched to Arrow Tree
• Kernel Upstream for 4.14.234
June 20, 2021
Changelog:
• Initial Official release
• June Security Patch
• Fixed missing APN and Keyboard when booting without gapps
• Updated blobs from MIUI 21.5.27
• Upstreamed SurgeX .237
• Disabled blur by default
August 6, 2021
Changelog :
* Blobs updated from LA.UM.9.11.r1-04500-NICOBAR.0 (CAF)
* Updated blobs from MIUI V12.0.1.0.RCOMIXM
* Upstreamed SurgeX .241
* Enabled IORap prefetching
* Undervolt GPU to reduce heat
* Boost GPU to max for blur
August 20, 2021
Changelog :
* Updated blobs from MIUI V12.0.2.0.RCOMIXM
* Upstreamed SurgeX .242
* Various updates and optimization in kernel
* Removed Widewine hack (R fw is now required)
* Boost I/O during bootup to improve boot speed
* Boost CPU during wake for faster faceunlock
* Increased default f2fs checkpoint interval
* Disabled conservative PL boost
October 15, 2021
Changelog:
* Switched to QuicksilveR kernel
* Fixed wakeup spams
* Updated KCAL preview from MIUI12
* Added 2 KCAL preview
* Disable Notification LED on willow
* Fix mic issues
* Added CABC and HBM support
* More changelog from past weekly builds in support group

Screenshots
https://drive.google.com/drive/folders/1FAkpBX5RaIKjc6KaRxsIaeeoZkN8hs9T?usp=sharing

nice

Why does it come without a keyboard? Can't connect to WiFi or login into Play Store because of that.
The ROM feels pretty snappy tho.
I'm on willow (8T) btw.

I'm on willow.
for me, all works perfect, smooth, fabulous battery life !!!!
After three days of use 40% left with 1h 43 min screen on. All the other room I've tried had a lot more battery drain per hour without any usage.

Hi! Few questions:
Does this ROM pass SafetyNet?
In the guide you suggest OrangeFox as recovery, but for OTA you say TWRP is recommended...so which recovery we should flash?

GattoLesso said:
Hi! Few questions:
Does this ROM pass SafetyNet?
In the guide you suggest OrangeFox as recovery, but for OTA you say TWRP is recommended...so which recovery we should flash?
Click to expand...
Click to collapse
• Pass even without Magisk
• It does support both recovery but I recommend OrangeFox

CSAPawn said:
• Pass even without Magisk
• It does support both recovery but I recommend OrangeFox
Click to expand...
Click to collapse
perro

Hi all , i am on latest at this moment version 31/12/2021 . It seems to me that the sound enhancement does not work as it should. Turning these options on or off will not change the sound quality. For example, the same settings on RedmiNote9S "miatoll" work fine .. and you can clearly hear the difference ..

Hayastan said:
Hi all , i am on latest at this moment version 31/12/2021 . It seems to me that the sound enhancement does not work as it should. Turning these options on or off will not change the sound quality. For example, the same settings on RedmiNote9S "miatoll" work fine .. and you can clearly hear the difference ..
Click to expand...
Click to collapse
Sound enchantment do you mean the Xiaomi Parts one?

CSAPawn said:
Sound enchantment do you mean the Xiaomi Parts one?
Click to expand...
Click to collapse
Sorry , yes , i forgot to mention about that . yes i am about Xiaomi Parts

Hayastan said:
Sorry , yes , i forgot to mention about that . yes i am about Xiaomi Parts
Click to expand...
Click to collapse
Will look into it, in the meantime do you have any magisk modules? That can break sound enchantment?

CSAPawn said:
Will look into it, in the meantime do you have any magisk modules? That can break sound enchantment?
Click to expand...
Click to collapse
No i don't , only systemless hosts .

CSAPawn said:
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!
Until Android Lollipop, the ROM has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LOS), we became LineageOS based with some tweaks from AOSP and then changed to be based on the "Ground Zero Open Source Project" (GZOSP) for Android Pie.
We changed again for Android Q-R with a base of AOSP repositories and some additions from LineageOS for device-specific repositories.
If there are any bugs we will sort them out if it concerns our codebase. This ROM isn't LineageOS supported, so there is no need to report errors/bugs to them!!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Feature list (rough overview)
In the beginning we would like to thank:
GZOSP team
LineageOS & CM (R.I.P.) team
@maxwen and the rest of the OmniRom team
DU team
Resurrection Remix team
AOSiP team
Community
@LorD ClockaN
@eyosen
@semdoc
@SpiritCroc
@wartomato
@Miccia
plus the rest of the crazy bunch that we call "team"
We are paying for servers that build weeklies and everything that comes with this, so EVERY DONATION will really be appreciated and be used to cover those expenses.
Thank you!!
Latest Stable Release Version 16.1
Download link: https://dwnld.aicp-rom.com
Please note that official builds will be deleted from our servers every month due to maintenance services.
Starting with AICP 15 we will be storing a copy of the most recent release here: https://media.aicp-rom.com/vault/.
Full Changelog link: https://dwnld.aicp-rom.com/
(Just click the changelog button next to the download link in the list of builds available for your device)
Google Apps:
We recommend MindTheGapps as it has been thoroughly tested and it works well with the ROM, some other minimal GApps packages still have issues, however feel free to try other GApps if you want to, just try MindTheGapps if you have any GApps related issues
MindTheGapps: https://androidfilehost.com/?w=files&flid=322935
Mirror: http://downloads.codefi.re/jdcteam/javelinanddart/gapps
You tell...
FAQ:
Before using the ROM:
Q. Can I have an ETA for the next build?
A. Yes, just look here to see what day your device is built on.
Q. Does this ROM support custom kernels officially?
A. No. You can still use them, but the discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter while using them!
Q. Does this ROM include GApps or do I have to flash them separately?
A. No, we do not include prebuilt GApps, because of possible licensing issues with Google Software and because some users do not want GApps preinstalled as they want to use alternative services like MicroG or just prefer flashing a GApps "flavor" of their liking.
Q. Does this ROM use the camera or gallery app from stock?
A. It depends on the device. In most cases these apps include proprietary libs/code and cannot be included in the device trees on Github or we risk having the ROM banned from Github. In this case, we might try to make them installable (separate from the ROM zip), or we might provide a version of these apps with the ROM that doesn't include any proprietary libs. It's also sometimes the case that these apps are simply not included because we didn't feel the need to do so for the device in question.
Q. Does this ROM have Extended/Scrolling screenshot?
A. No, extended screenshot was implemented using an app extracted and modified from manufacturer firmware/system images and is proprietary as well. It led to the closing of many ROM's sources on GitHub.
Q. Does this ROM have FaceUnlock?
A. No, FaceUnlock was also an app extracted and modified from some manufacturers. Even Google removed the Trusted Face (FaceUnlock) feature for security reasons on Android 9.0/10.x. Adding the modified feature did the same to ROM sources as described above.
Q. Can you add (insert favorite weather provider)?
A. No, we cannot add more weather providers as the implementations change and we (the ROM) now have to pay for most services, and that is not cheap, so we decided to use the best free service that we could find, the only way to add your own is for users to apply for their own API key to use their preferred service.
Q. Does this ROM have private official builds with the above proprietary libs included?
A. No, we believe in open source software, this way users know what's in the build and can replicate it themselves, all official builds are built on our build servers using the public sources from github and no one can (or would) add their own private sources to the build.
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the flashing instructions...
Q. Can the builds be dirty flashed over each other?
A. Yes, this is the usual behavior on flashing a new official build by (or using) the build-in updater service.
Q. How do I 'dirty flash' builds?
A. Wipe the System, Cache, and ART/Dalvik cache. Flash the ROM, GApps (only needed if you wipe the system), your preferred root solution, and reboot. Or just use the OTA app to perform that task for you.
Q. How do I flash kernel builds?
A1. If it's a .img file, boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot" as the destination, then swipe to flash, then go back to the install screen and install your root method again, if you don't want to lose root and reboot.
A2. If it's a flashable ZIP, you can flash it together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue if you don't want to lose root. Now swipe to flash and reboot afterward.
Using the ROM:
Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat AND the model name. (Note: Please just link the logcat from your GDrive, Dropbox, etc. Do not post the content here. Thanks.)
Q. How do I get a logcat, what type should I get, and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog (Root needed).
A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the others section on the AICP Extras main page.
The ROM should contain everything you need to enjoy Android R. You don't need to install any Add-ons, simply download the latest ROM and GApps, then follow the flashing instructions and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM zip file.
It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup (or with any backup/restore app) as this can cause stability issues that are very hard to debug, restoring regular apps is fine though.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
How to flash for the first time:
(Again: Don't do it if you don't know!)
1. Download the ROM and GApps and transfer them to your device.
2. Boot to recovery (OrangeFox Recovery recommended).
3. Wipe the System, Vendor, Cache, and Data (you might need to format the data partition!).
4. Flash the ROM zip file.
5. Flash the GApps (optional, needed for e.g. Google Playstore to work)
6. Reboot and set up your device.
7. Reboot back into TWRP recovery.
8. Flash the root solution of your choice (optional).
9. Reboot your device.
The procedure may vary from device to device and is a bit different on system updates!
The ROM has GApps persistence in between dirty flashes, so you only have to flash them once! This might differ on AvB Devices.
Currently supported Root Solution:
Magisk stable
Magisk versions >= 20.4 don't usually need to be flashed on every dirty flash.
Depending on the device, you may need to flash it every time, unless your maintainer says otherwise, you should be fine.
PREREQUISITE FOR OTA ("Over-The-Air" Updates):
TWRP recovery is needed to be able to flash using the built-in OTA app.
Please make sure that you are on the latest OrangeFox recovery, keep in mind that this could also be an unofficial version!
On encrypted devices, you will have to enter your PIN/password in TWRP before the process starts.
If you want to contribute to AICP, or if you want to see what is being worked on/merged, feel free to visit our Gerrit code review system. (Link is at the bottom!!!)
Kernel source:
https://github.com/AICP/kernel_xiaomi_ginkgoDevice tree source:
https://github.com/AICP/device_xiaomi_ginkgoVendor source:
AICP/proprietary_vendor_xiaomi
Contribute to AICP/proprietary_vendor_xiaomi development by creating an account on GitHub.
github.com
ROM & Additional links:
AICP's Homepage
AICP Gerrit Code Review
AICP sources on Github
AICP Download page for official builds and media content
AICP Discord Community
AICP Telegram channel for server notifications on official builds
Contributors:
@Adithya R
@madmax7896
Information:
ROM OS Version: 11.x
Kernel: Linux 4.14
ROM Firmware required: Latest Firmware from MIUI 21.4.28 and up
Status: STABLE
Release Date: 05-20-2021
You want to see a "normal" night at the "DEV office", click here!!
Click to expand...
Click to collapse
Does AptX and LDAC work?

promethsuresh said:
Does AptX and LDAC work?
Click to expand...
Click to collapse
Don't know bout LDAC, but AptX worked flawless last time I ran the rom (some weeks ago).

NeoPreacher said:
Don't know bout LDAC, but AptX worked flawless last time I ran the rom (some weeks ago).
Click to expand...
Click to collapse
LDAC doesn't work

Hmm cant find anything related Xiaomi Parts in the changelog for 07/01/2022 build , but dirty flashed over previous build and now Audio Enchantment of Xiaomi Part works as expected )

Hello, does your rom support signature spoofing for microG ? thanks

Develop Bugs

welcome