Develop Bugs

02 universal stuck in bootloader, cant fix.

I just got this thing and wanted to upgrade to WM6, i downloaded a new crossbow for the device and started to flash it following the instructions included with the upgrade. a little way thru the flash i got a connection error and now the device is stuck in bootloader. I tried the program to recover from stuck bootloader but on the drop down menu there is no USB option, all COMs only. But oddly enough the bootloader does say USB when plugged in.
I am running Vista which came with my new pc and I am hating it lately.
Please someone help me out, i dont really know what to do now. I really want this thing fixed and properly flashed to WM6.
thanks, Noob

hi
does the PC recognizes the PDA?
if when you connect your pda to your pc (with removed sd card) you see"usb" (on screen) it does

ihave problems like you (vista notebook,no usb on mtty......) but i can fix them
first download:http://www.wikifortio.com/141334/mtty.exe.zip (not from wiki)
(it has usb port for mee)
then
1. Take out the SD and SIM cards
2. Opened ActiveSync and go to file, connection setting and Un-check "Allow USB Connections". Then press Ok and close ActiveSync
3. Put in bootloader mode (Power + Light + reset) which brings up the "un-backlit" screen with "Serial" at the top and v0.XX at the bottom
4. Plug in USB cable DIRECTLY from PC to Jasjar (MAKE SURE NOT TO USE A USB HUB). You MIGHT then see a warning window complaining that an "Unsigned" device driver is being attempted to be installed. You will be prompted to either "STOP INSTALLATION" or "CONTINUE ANYWAY" - this warning can be safely ignored and so just click on "CONTINUE ANYWAY".
5. Open mtty utility / software
6. Select USB from the "Port" drop-down on the upper left corner of the dialog box and hit OK
7. Then another screen will come up. Hit enter and that will show "USB>"
8. Type "set 14 0" and hit enter. You will see some jibberish on the mtty utility which will again be suffixed by "USB>". Your HTC Universal will not seem to have done anything and should still indicate "USB" at the top, and "v2.01" (or equivalent) at the bottom. You can now close the mtty utility.
9. On the Desktop PC unplug the USB cable and re-plug it into the exact same USB port again. From this point onwards, you must use this exact same USB port to flash the ROMs of your Universal because failure to do so will most proably result in "Connection Errors" at the beginning of the flashing process when the RUU attempts to establish communication with your Universal. After re-pluging into the USB port, you can then run the ROM update JASJAR_WWE_13076_164_10900_wwe_ship.exe (or latest version)
9,1.if you can't upgrade your rom on vista see:
http://forum.xda-developers.com/showthread.php?t=291723&highlight=ruu+vista
i recommend you for first time upgrade your rom with"Beasty & Laurentius 2.09.01"
by me:right click on each ruu that you want to use go to properties intop bar
goto compatibility's tab in compatibility mode tik the run this program in...... checkbox then select"windows xp service pak 2"
10. It will go through the upgrade process with the 3 steps and "completed successfully" on the PC
11. Picture 1 below shows what the screen looked like after step 6 after disconnecting the USB cable, as 100% complete
for picture goto
http://wiki.xda-developers.com/index.php?pagename=Instructions for those stuck on Boot Screen

what hapened to you txkuntryboy ?

All you need to fix it is in the WIKI
Psi

i have the same probm i tride but it gives me in mtty programe that usb port cannot open

afash334 said:
i have the same probm i tride but it gives me in mtty programe that usb port cannot open
Click to expand...
Click to collapse
hi afash can you explain me your posision

hi said.
these are my information:
-windows vista home premium.
-using windows mobile device center.
ver. 6.1.6965
if i go to administrative tools i got:
-mobile devices with information:
-location: port_#0008.hub_#001
-microsoft usb sync. with information:
-driver date :5/31/2007
-driver version: 6.1.6965.0
my problem is my device stuck in boot screen with top usb and bottom
v1.01
i tryid what wretin above to uncheck the usb from sync then connect and i start mtty program i chose usb then ok give me this message
{usb port can not open }

thanx said and thanx wiki after long long search i found the solution

thanxx god
if want put your solution here for others

http://forum.xda-developers.com/showthread.php?t=313001

Device is stuck in bootloader mode

XDA - WIKI says
Problem 4: Device is stuck in bootloader mode (tri-color screen)
Important : Windows VISTA users need to make a change to their system to successfully use many ROM packages. See Mr. Vanx's guide here
If you are using Windows XP or Windows 2000, you MUST have the Microsoft .net framework installed on your computer.
Disable ActiveSync: connections -- settings -- uncheck "Allow USB Connections"
Remove the battery, put it back in, connect the USB cable, power on the unit (this should allow the USB port to be opened again)
Wait a minute or two, if you get a message that device cannot be recognized just close and ignore it
Open mtty.exe and select "USB" from the dialog box, then hit Ok.
You should see a white screen, hit enter and you should see a prompt like this: "USB>"
Type set 14 0 (do not copy and paste!!!) and hit enter
Soft reset with stylus
OS ROM and radio version should be back and OS functional, the unit isn't a BRICK anymore!
if it doesn't unbrick, repeat all the steps but with the command set 16 0
Click to expand...
Click to collapse
Whomever it was that wrote this.... I LOVE YOU!

Nice declaration in Pulbic... hehehehe
Cheers

cannot be detected via pc

i installed the drivers still my sgy only chargers help please
Sent from my GT-S5360

is ur sgy is fully drain? what exactly happen?

maicsdhin said:
i installed the drivers still my sgy only chargers help please
Sent from my GT-S5360
Click to expand...
Click to collapse
Help us help you, Please answer the questions below:
1. What OS are you using? Ex. Windows XP/Vista/7/8 or Mac OSX?
2. Do you get any error when installing the driver?
3. Do you get an error when you connect the device?
4. We're you able to sync or get your phone detected by KIES?
Thanks,
Carl

Re:
i had also encountered the same problem last night. I just don't know what causes the problem. It's was ok since yesterday after i hooked it to charge in my laptop and last night when i tried to charge again i noticed that that usb is not appearing on the status bar. I tried to reboot the both device and nothings change.
BTW im using windows 7 x86.

it's on custom rom,what custom rom r u using? try to wipe data/cache and partition,i also encounter the same problems previously.. but i ended up reflashing my rom..

im using windows xp . no error . it only charges as i connect . no , kies didnt dtect my sgy
r
Sent from my GT-S5360

you only need to do this exactly
1. first install skies or samsung drivers and odin.
2. open odin (1.85 or 1.84)
3. make sure your phone is open not in download mode. then connect usb cable to your computer with odin window open and connect galaxy y then this time turn off your fone and press "home button+power+volume down" and it detects your phone..and done!thats it.
Sent from my GT-S5360 using Tapatalk 2

dondieboy said:
i had also encountered the same problem last night. I just don't know what causes the problem. It's was ok since yesterday after i hooked it to charge in my laptop and last night when i tried to charge again i noticed that that usb is not appearing on the status bar. I tried to reboot the both device and nothings change.
BTW im using windows 7 x86.
Click to expand...
Click to collapse
vEget7 said:
it's on custom rom,what custom rom r u using? try to wipe data/cache and partition,i also encounter the same problems previously.. but i ended up reflashing my rom..
Click to expand...
Click to collapse
maicsdhin said:
im using windows xp . no error . it only charges as i connect . no , kies didnt dtect my sgy
r
Sent from my GT-S5360
Click to expand...
Click to collapse
mavszorg said:
you only need to do this exactly
1. first install skies or samsung drivers and odin.
2. open odin (1.85 or 1.84)
3. make sure your phone is open not in download mode. then connect usb cable to your computer with odin window open and connect galaxy y then this time turn off your fone and press "home button+power+volume down" and it detects your phone..and done!thats it.
Sent from my GT-S5360 using Tapatalk 2
Click to expand...
Click to collapse
Please do check the following:1. USB Ports
Try a different port. [Applies to PREVIOUSLY DETECTED PHONE and/or NEW PHONE CONNECTED FOR THE FIRST TIME]
If you are using a desktop computer, try the USB ports at the back of your computer.
If you are using a notebook computer, make sure the power plan you're using is not in Balanced or Power Saver. Try using High Performance when trying to flash and make sure USB Selective Suspend is disabled.​2. USB Filter Driver [Applies to Windows Vista/7 Machines though later version of XP Supports USB Filter Driver]A Filter Driveris a Microsoft Windows driver that adds value to peripheral devices or supports a specialized device in the personal computer. It is a driver/program/module that is inserted into the existing driver stack to perform some specific function.
Written either by Microsoft or the vendor of the hardware, any number of filter drivers can be added to Windows. Upper level filter drivers sit above the primary driver for the device (the function driver), while lower level filter drivers sit below the function driver and above the bus driver.​Try deleting theUSB "Upper Filter" & "Lower Filter" Entry in registry editor and check if it fixes the problem.
Delete the USB Upper and Lower Filter in the Registry by following the steps by following the steps below:
Before we go any further, please first backup the Registry.
Important: This method contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry
incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can
restore the registry if a problem occurs.
For more information about how to back up and restore the registry in Windows:
http://windows.microsoft.com/en-US/windows7/Back-up-the-registry
1. Click “Start”, type “REGEDIT” (without quotation marks) in the “Search” bar and press Enter.
Note: If UAC (User Account Control) pops up, please accept it.
2. Right click “Computer” (the root node) in the left pane, click “Export” under the “File” menu, choose “All” under “Export range”, and select “Desktop”
in the “Save” in box and type backup in “File Name”. Click “Save”.
Note: The backup file is on the Desktop and named backup.reg. We can simply restore the registry by double-clicking the backup.reg file.
3. Click “Start”, type “REGEDIT” (without quotation marks) in the “Search” bar and press Enter again.
4. Locate the “UpperFilters” value under the following key in the registry:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{36FC9E60-C465-11CF-8056-444553540000}
5. On the “Edit” menu, click “Delete”, and then click “OK”.
6. Locate the “LowerFilters” value under the same key in the registry:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{36FC9E60-C465-11CF-8056-444553540000}
7. On the “Edit” menu, click “Delete”, and then click “OK”.
8. Quit Registry Editor and restart the computer.
Make sure you follow the steps correctly.​3. Samsung drivers[Applies to PREVIOUSLY DETECTED PHONE and/or NEW PHONE CONNECTED FOR THE FIRST TIME]
Reinstall Samsung drivers to make sure driver files are intact. Believe it or not, a simple update or program installation can mess up drivers on your computer.
Before you re-install the driver, please take note of the following:
Your phone should be disconnected and/or any USB device (USB Flash drives, cameras, ipod etc etc)
Close any program that communicates with you phone -KIES, Odin etc etc.
If you're using for more than an hour or have opened several programs, please turn of your computer and the turn it back on, a warm boot (restart) is not the best way to "refresh" your computer before you install drivers, It should be a cold boot (shutdown-power up)
If you've taken my notes in consideration, please by all means re-install the drivers ​4. Try a different version of Odin that supports Galaxy Young.
Make sure the Odin version you're using supports Galaxy Young. Some Odin versions support specific samsung phones ONLY​5. Restore your computer to a state where your phone can be detected.[Applies to PREVIOUSLY DETECTED PHONE ONLY]
This option applies if all else fail and do me a favor, don't call your computer's support team, they will make you do a bunch of troubleshooting steps and in the end, a simple restore would take care of it.​ANOTHER NOTE:
Pressing the POWER BUTTON without having both HOME BUTTON and VOLUME UP KEY pressed will not get you anywhere. Either your press HOME BUTTON first then the VOLUME UP KEY before you press the power button or you make yourself believe that your phone won't go into download mode/Odin mode. That being true, previous comment that says: "home button+power+volume down" I believe is a typo. ​Good luck to y'all who have this kind problem.

LG G4 after flashing it went dead.

Hello, Friends, I wanted to unlock an LG G4 T-mobile for a customer with "Device unlock app"
after the flashing using LG Tools from z3x the phone now is a dead black screen. When I plugged into the computer I can hear the sounds it's connected but nothing is showing. Need help to turn it back on thanks. I can't even load in Download mode.
Thanks for any help.

umarmansare said:
Hello, Friends, I wanted to unlock an LG G4 T-mobile for a customer with "Device unlock app"
after the flashing using LG Tools from z3x the phone now is a dead black screen. When I plugged into the computer I can hear the sounds it's connected but nothing is showing. Need help to turn it back on thanks. I can't even load in Download mode.
Thanks for any help.
Click to expand...
Click to collapse
Can you boot to recovery? Should be the power + volume down combo until the logo comes up.
Alternatively,
Have you installed ADB and fastboot drivers?
Can ADB see your device when you're plugged into the computer? Perhaps you can get into bootloader mode through ADB if so.
Connect LG G4 to your computer.
On the PC, access the Android SDK folder (download it if you don't have it).
There, open a command prompt window by pressing shift + right click on any blank area.
In the CMD window, execute the command " adb reboot bootloader " without quotes. If you haven't enabled USB debugging, you may be out of luck.

Tried but not working
Hello, Friend Thank you very much for your time and efforts while typing this to help me out. I did but still doesn't recognize took the owner. Technically the phone is dead.

umarmansare said:
Hello, Friend Thank you very much for your time and efforts while typing this to help me out. I did but still doesn't recognize took the owner. Technically the phone is dead.
Click to expand...
Click to collapse
why you use flash tools.? you should ut use LGUP and KDZ file.
what is this app customer with "Device unlock app"
unlock what.??

umarmansare said:
Hello, Friends, I wanted to unlock an LG G4 T-mobile for a customer with "Device unlock app"
after the flashing using LG Tools from z3x the phone now is a dead black screen. When I plugged into the computer I can hear the sounds it's connected but nothing is showing. Need help to turn it back on thanks. I can't even load in Download mode.
Thanks for any help.
Click to expand...
Click to collapse
1. Point us to that dubious unlock app please!
2. Very very often an issue occurs because a user do not use the correct commands or important error messages are thrown and the user do not show. So please write EXACTLY what you do. For example the exact command to proof the connection (e.g. "adb devices") and the exact result. easiest and best way is to just make a screenshot of anything.
3. Another example is how to you try to get into download mode? There are some guides which do not work so explain what you do always helps others to help you.
I use the following method:
Pull out battery
Plugin USB cable connected to the pc
Press vol Up and keep pressed while putting battery back in place
4. To avoid driver issues you should consider to use FWUL ( https://tinyurl.com/FWULatXDA ) for anything else then kdz flashing (this requires windows)
.
Sent from my LG-H815 using XDA Labs

steadfasterX said:
1. Point us to that dubious unlock app please!
2. Very very often an issue occurs because a user do not use the correct commands or important error messages are thrown and the user do not show. So please write EXACTLY what you do. For example the exact command to proof the connection (e.g. "adb devices") and the exact result. easiest and best way is to just make a screenshot of anything.
3. Another example is how to you try to get into download mode? There are some guides which do not work so explain what you do always helps others to help you.
I use the following method:
Pull out battery
Plugin USB cable connected to the pc
Press vol Up and keep pressed while putting battery back in place
4. To avoid driver issues you should consider to use FWUL ( https://tinyurl.com/FWULatXDA ) for anything else then kdz flashing (this requires windows)
.
Sent from my LG-H815 using XDA Labs
Click to expand...
Click to collapse
Hi, Thank you very much for taking your time and energy to answer me. I used Z3x to Factory the LG G4 (T-Mobile) I wanted to flash it by downgrading before to see if it could work. this is how I break the phone with the downgrading. So now the phone is not recognizing by the computer as Modem when I plugged in, I see it only as External Drive.

umarmansare said:
Hi, Thank you very much for taking your time and energy to answer me. I used Z3x to Factory the LG G4 (T-Mobile) I wanted to flash it by downgrading before to see if it could work. this is how I break the phone with the downgrading. So now the phone is not recognizing by the computer as Modem when I plugged in, I see it only as External Drive.
Click to expand...
Click to collapse
you cannot downgrade h811 it has antirollback. and in autoprime 20i thread says it bricks phone.. if it was on MM and flashed lower antirollback.
what is Z3x.???

USB debugging

Hello everyone, I really need help bad!! I just got my honor 7x and was trying to unlock my bootloader. I have followed directions for how to do this. The problem is that although I can see phone and files on laptop. For some reason the phone doesn't show as connected. I have tried adb commands as well as multi tool. Every way I try it doesn't work. I have unlocked bootloaders on other phone before. No matter what driver I have downloaded I still have yellow caution. Sighn in device manager ager. I have searched and searched for solution with no resolve. If it matters it is the model that a
Ends with the number 24. Thanks in advance

Hmmm..
edshawn911 said:
Hello everyone, I really need help bad!! I just got my honor 7x and was trying to unlock my bootloader. I have followed directions for how to do this. The problem is that although I can see phone and files on laptop. For some reason the phone doesn't show as connected. I have tried adb commands as well as multi tool. Every way I try it doesn't work. I have unlocked bootloaders on other phone before. No matter what driver I have downloaded I still have yellow caution. Sighn in device manager ager. I have searched and searched for solution with no resolve. If it matters it is the model that a
Ends with the number 24. Thanks in advance
Click to expand...
Click to collapse
Hello..
Original Cable ?
What Version Of Windows ?
Drivers Installed ?
ADB Debugging Switched On ?
When You Type "ADB / FASTBOOT DEVICES" Seeing A Series Of Letters & Numbers ?

RaiderWill said:
Hello..
Original Cable ?
What Version Of Windows ?
Drivers Installed ?
ADB Debugging Switched On ?
When You Type "ADB / FASTBOOT DEVICES" Seeing A Series Of Letters & Numbers ?
Click to expand...
Click to collapse
original as well as tried other cable.
windows 8
installed whatever drivers i could find. nothing said 7x .
i have allow adb debugging in charge only mode checked. i
when i type fastboot command as well as adb devices it doesn't find anything.

edshawn911 said:
original as well as tried other cable.
windows 8
installed whatever drivers i could find. nothing said 7x .
i have allow adb debugging in charge only mode checked. i
when i type fastboot command as well as adb devices it doesn't find anything.
Click to expand...
Click to collapse
Ok... Since I have no intention to root until Huawei pushes the Oreo and Facial Recognition updates, I have kept USB Debugging "OFF" and set Select USB Configuration to: Media Transfer Protocol (MTP)
Then, I attempted to do what you are trying to do... and it worked perfectly..
So.. Do This:
Step 1 Click on your windows icon and in the search bar type "CMD"
Step 2 Set USB Configuration to MTP.
Step 3 Again I had Debugging off.. you can try it with it on if you like.. either way turn off your device.
Step 4 Hold down the Vol-Down button while plugging your device into your USB cable connected to your computer.
Step 5 This will turn on your device and put you in Fastboot Mode.
Step 6 Now go to your ADB Command Line and type "fastboot devices"
You'll see it.....