after trying to flash to a newer version something has gone completely wrong.
is there anyone in holland who can do a COMPLETE "re-install" for my handicaped brother..?
The XDA seems to "hang" in a grey screen.
done reset a few times, but it said :
"updating ROM " when nothing was happening.
NOW the screen only show gray lines, and NO text is shown on the display.
tried all soft / hard resets..
someone PLEASE help.
Related
I was attempting to upgrade the rom image (to an O2 rom for an O2 device), when the device powered itself off. It hadn't written anything, it just got to the splash screen where it said checking device.
My PC never shut down, just my Exec. I thought it was one of the various power offs that the devices do during rom flashing.
I can do a hard reset, and I get the screen that says press zero or x, but after that I never get anything. even if I plug the device in, I don't even get a charging light.
can anyone help me with where I should begin troubleshooting????
well, I just tried re-updating it, just to see what woudl happen, even though there is no display. I used the WM6 I found, and it made it through the radio stack (screen is now dark, no back lit, but can see X% upgrade completed), so it looks liek its working, just needs to finish the rom. I hope, lol!
well, it made it all the way through the rom update, and asked for a cold boot, but the screen just stays dark, even after the hard reset.
Any ideas anyone???
okay, problem solved! I was able to get the device into bootloader mode, and then ran a flash for WM6.
toast said:
I was attempting to upgrade the rom image (to an O2 rom for an O2 device), when the device powered itself off. It hadn't written anything, it just got to the splash screen where it said checking device.
My PC never shut down, just my Exec. I thought it was one of the various power offs that the devices do during rom flashing.
I can do a hard reset, and I get the screen that says press zero or x, but after that I never get anything. even if I plug the device in, I don't even get a charging light.
can anyone help me with where I should begin troubleshooting????
Click to expand...
Click to collapse
hi toast
i got the same problem with xda exec. i read all your thread but cant find any instuction which you might got. can you please let me know what you have done to solve that issue. cheers
how did you get it through!!
hey, you the got the problem to be solved, please help me too in solving this porblem. I am getting the same problem of that screen scrambleness. Please help through step by step information.
LMAO....help me too...it wont even sync with with the ative sync program...how am i supposed to even begin fixing this problem????
I tried to upgrade the ROM n my trinity without putting the device in the SPL. The device went dead completely and I could not start it on. I tried to soft reset, hard reset, and tried to get the SPL but nothing is working. When I tried to upgrade it gives message 260 “no connection”. Could anybody tell me how to revive my trinity or get it working again?
Been there a few times myself.
Do you live in the US? If so, I could call you and walk you through it, or MSN chat, or??? or if you'd rather, let me know and I will try to walk you through it in here.
I am in Europe, time difference is large, appreciate if you give step by step instructions in this forum. Thanks again.
SuperSport,
Hi agin, waiting for ur instructions. I am missing my trinity.
Once agin thanks for ur help
Sorry to hear that...you can have a look here:
http://forum.xda-developers.com/showthread.php?t=299659
and here
http://trinityguides.info/index.php?option=com_frontpage&Itemid=1
hope that can help...
good luck...
jma81113 said:
I tried to upgrade the ROM n my trinity without putting the device in the SPL. The device went dead completely and I could not start it on. I tried to soft reset, hard reset, and tried to get the SPL but nothing is working. When I tried to upgrade it gives message 260 “no connection”. Could anybody tell me how to revive my trinity or get it working again?
Click to expand...
Click to collapse
I apologize jma81113. I was unexpectedly called out of town. My nephew crashed his motorcycle and is in the hospital, so I rushed over there. I'm back now.
Any time I cannot flash another rom, I am forced to flash back to an OEM rom, in my case, I use the one found here: http://www.dopodasia.com/download/RUU_Trinity_DOPODASIA_WWE_3.00.707.18_6275_1.46.30.11_108_Ship.exe
This flashes back the original SPL, Radio, OS, etc... It works best if you can do it from a Windows XP computer. If you don't have that option, there are ways to do it using Vista outlined here.
Then I always flash the Hard SPL found here. In my case, I use Des' Crash Proof. I've had the most success flashing Cooked ROMS with this one.
From there, Flashing Cooked ROMS should work just fine. If you run into trouble, you might have to flash back to the OEM ROM again. Occasionally, I have to. I keep a copy on hand at all times.
Oops! Actually, as I read back through your message, I see that you might be getting just a BLACK screen? Is this correct? And I assume by you saying you tried to get the SPL that you mean you pushed the 'power' 'camera' and 'reset' buttons and nothing? If that's the case, let me know and I'll do some more research.
Just so I know, do you get the orange LED lighting up when you plug in the USB cable showing it's charging?
SuperSport
I am sorry to hear about your nephew accident, I hope he is well and wish him well.
Yes I got a BLACK screen when I press the 'power' 'camera' and 'reset' buttons. The device is completely dead.
When i connect the device to the laptop, red LED lights up for 10 seconds and then disappears, I even changed the battery but no sucess.
Hard Reset?
Oops! Sorry, just re-read your first post. Looks like you tried this already...
The Black Screen is new to me, so I'm shooting in the dark.
You many have already done this, but, have you tried a HARD reset? Press the 'Calendar' 'Contacts' and then 'Reset' buttons all together. Hopefully this will bring up a screen that asks if you want to do a reset. Press the Green Send key and it will reset. Let me know if that works or not...
Buttons shown in attached image:
I have done it already no luck, it seems I am going to send it to the dealer in Malaysia. Thanks any way Supersport for your time and effort. Once again hope your nephew is will.
Hi all,
Wonder if anyone could give me a hand. My messaging function went into white screen, cant type or send message out.
I did a reboot a while ago because the phone froze on the wm screen. It chucked my spl back to 1.37. Wonder if anyone could give me a hand to let me know how to deal with this problem?
Do i need to hardflash my spl first?
Thanks.
tchiuhangng said:
Hi all,
Wonder if anyone could give me a hand. My messaging function went into white screen, cant type or send message out.
I did a reboot a while ago because the phone froze on the wm screen. It chucked my spl back to 1.37. Wonder if anyone could give me a hand to let me know how to deal with this problem?
Do i need to hardflash my spl first?
Thanks.
Click to expand...
Click to collapse
.
could you be a bit more specific? have you tried soft-resetting the device since it had this problem? if so you may need to hard-reset the device
not sure why, i tried hitting down vol + reset for a soft reset.
Went into the bootloader, but froze. Only said serial.
I am wondering do i need to hard flash the device first -.-"
Would be great if i get some help from someone.
Thanks!
Hi guys, strange problem here. I have flashed many rom's and no problem till now. I have allways used mtty before flashing. Now my device has freezed, soft reset - freeze again, hard reset - freeze on align screen. Mtty again, flashed stock rom, hard reset - freeze on align screen. Tried everything and nothing worked. It would'nt go any further from align screen. It's driving me crazy! Please help me, some advices would be thruly apreciated. thanks
I had an old iPaq which had some sort of rom hardware error and would give errors because of that. Have a look at the errors when you use mtty (assuming you format with the 'task 29' command), there's usually some, but if there's something that looks a bit out of place it might be a physical issue. Also, make sure you're taping the align screen firmly, and if all else fails, just leave it for a few hours on that screen, it may just be taking ages to start up
EDIT: maybe there's a limit to how many times a rom can be flashed? can anyone help us out here?
I know that this issue has been discussed several times here on the forum, but I couldn't find a solution for my situation. So, kindly bear with me.
I was talking on the phone when it slipped and fell down to the ground. When I lift the device, the screen was fine but the touch was not working. I couldn't draw the lock pattern or type the password or anything. I restarted the device several times but without success.
I found a youtube video on how to open the device to check the screen flat cable. I opened the device and checked the cable. It was a little bit loose, I secured it and put everything back. I turned on the device and the screen worked, but it gave the message "Your device is corrupt ..." (Red warning).
The google support forum said that this warning is due "tampering" with the OS. This is not my case because simply, I don't know how.
I tried "Factory Reset" several times, but wasn't successful. The device keeps showing this warning and when I continue, it works for half an hour or so before it restarts again, and so on.
My problem now is that I don't know if this is a hardware or software problem.
I really appreciate all your help and support.
Best Regards,
mwahid
mwahid said:
My problem now is that I don't know if this is a hardware or software problem.
I really appreciate all your help and support.
Best Regards,
mwahid
Click to expand...
Click to collapse
That is what shows up on every boot after you unlock the bootloader. There may have been a short circuit of some kind and was viewed as tampering. It affects nothing in the way your phone operates but affects warranty.
If it is really bothering you, you can try to flash the factory image and relock the bootloader. Then re-unlock the bootloader to see if that gets rid of the problem. However, as stated above it does not affect how your phone operates; so personally I would just leave it.
Thanks for your reply.
The problem is that the device is not working properly. It keeps restarting every half an hour or so and sometimes it hangs even when I am not using it.
I checked the bootloader from the fastboot menu and it is locked. I didn't try to unlock the bootloader or reflash the device. This message appeared only after I opened the device to fix the screen.
I will try reflashing the factory image and see what will happen.
Thanks again for your help.
I followed this guide to the letter, but the problem is still the same. The phone works for a few minutes then suddenly restarts and displays the message "Your device is corrupt ..." (Red warning)
I really appreciate any ideas.
Thanks
Hello again,
Could a hardware malfunction be the cause of this problem?
I just want to know so I can evaluate my option whether to fix it or buy a new one.
Thanks,
mwahid
Im haveing the same problem but i never drop it or open it its did not boot half the time now its having none of it its will not even turn on so gg LG.