I have recently asked a couple of questions on how to upgrade my ROM on my current O2 XDA. (I was trying to unlock it but could not use the unlock pgm because the ROM version was not current)
I have had a few excellent responses. But not being to computer literate, particularly on upgrading my ROM. I was hoping someone could point me in the right direction. Does anyone know where to obtain a step by step guide to updating the ROM. Also I had asked about safeguarding my existing ROM until the upgrade was successful. Can someone help by answering the following?
I have downloaded the relevant versions of ROM to apply
1) How do I back up my current ROM so that I can re-apply in the event of a problem, i.e. is it possible to back it up to SD and also on my desktop?
2) Is it possible to copy the new ROM you wish to apply to SD/MMC card and then apply it?
3) What is the differences between radio versions I here so much spoke about it and don’t understand this?
Any responses would be very appreciated, hopefully I’ll get my answer in the one go or I can open the relevant thread. Thanks in advance and a merry xmas to you all.
Ok first thing you want to do is to read these three pages:
http://www.xda-developers.com/rom/
http://www.xda-developers.com/XDArit/
http://www.xda-developers.com/bootloader/
They should give you a reasonable understanding of whats involved to update your ROM.
1) The bootloader page covers backing up your current ROM
2) Yes you can copy it to SD/MMC (this is safer than using cradle anyway..) this is covered on XDArit page
3) Unless you are experiencing problems with your current radio stack most people will advise against upgrading it.. to upgrade your OS you only need the CE Rom. These can be made at Yorch's kitchen: http://kitchen.romanweb.com/kitchen/index.php then use XDArit/Osimage to copy it to your SD card.
HTH
Neil
I don´t know. Sorry
This is a newbie question but here goes, I can't load the 2003 upgrade from TMOBILE because it tells me the device is not compatible due to the difference in roms is there anything I can do to reset the rom or is there someway of installing this please help
Thanks[/img]
I have heard about programme a and the xda tools where do i get them and how do I unpack the tmobile 2003 upgrade I'm new at this but my phone is screwed up and I am trying to fix it thanks for any help
You have to use the SD card upgrade method
dougandersonrs said:
This is a newbie question but here goes, I can't load the 2003 upgrade from TMOBILE because it tells me the device is not compatible due to the difference in roms is there anything I can do to reset the rom or is there someway of installing this please help
Click to expand...
Click to collapse
You have to unpack the files of the upgrade, and then run adaptROM before running 'Programme A'. Or indeed use the SD card method, whichever is easiest for you. Both can be done most conveniently if you install our XDAtools.
dougandersonrs said:
I have heard about programme a and the xda tools where do i get them and how do I unpack the tmobile 2003 upgrade I'm new at this but my phone is screwed up and I am trying to fix it thanks for any help
Click to expand...
Click to collapse
Hi,
did you get it managed with your XDA. If so, could you give me a hint how to upgrade fro mthe dev. edition?
Thanks
I tried to upgrade my Dell Axim X50 and used the X50v files from MagLite. Big Mistake, as I did not realize that I have a X50. So now it is dead and I can't do anything . Unfortunately, I do not really know what I'm doing
Can anybody tell how to upgrade to WM5 or WM6 (what I still prefer) or get my WM2003SE back?
Thank you for your help
Nuye2
Does the boot-loader work ? Have you updated it to the one of x50v WM6?
If so, even if your Axim does not boot, but the boot-loader still works, there can be hope to unbrick your x50...
You need to find the original x50 boot loader... And Rename it in a way it could be booted from the bootloader
I tried to put WM5 A01 on it (using the files I found in MagLite's threat). Afterwards I realized that X50v is not equal to my X50. Now I cannot even get into the diagnostic modus (by pressing Record button + Power Button + tap Reset button), the screen just turns on for a second but is black as soon as I release the buttons. So first of all I cannot access the boot loader screen and second I dont have the files for bringing it back to WM2003Se.
Please does anybody know how to bring it back to life. I cannot afford a new one
Thanks
Nuye2
look for the tool to downgrade your axim x50 at dell website, they have a utility to downgrade from wm5 to wm2003se.
it should work for you, i have tried it on my axim x50v and it works fine.
download the following utility for QVGA devices (X50):
ftp : // ftp . us . dell . com / utility / R115117 . EXE
the following is for VGA devices (X50v):
http : // ftp . us . dell . com / utility / R111630 . EXE
make sure to use the first file.
good luck
if it didnt work then try checking the following threed:
http://www.aximsite.com/boards/x50-...olution-how-use-sd-image-loader-flashing.html
I am not a genius
Thank you very much for yout help, EmualDave!
Before I get started, there are still some things I dont get . I downloaded the posted file but this only works via activesync. So I read the tutorial on how to create CRC files. Do I have to do this with the *.img file, which is part of the package you posted, and use a hex editor to create a bootloader and OS image?
And as I would like to put back the german version of WM2003Se, on the Dell homepage
(http://support.euro.dell.com/suppor...-1&impid=-1&formatcnt=1&libid=7&fileid=133533)
I found an *.img for just updating WM2003Se. Can I use this version and create the CRC files?
I was just too brave when I tried to upgrade my axim and now I just want to undo it.
Nuye
okay .....
first of all can you get the boot loader menu????
EmualDave said:
okay .....
first of all can you get the boot loader menu????
Click to expand...
Click to collapse
He already said in his third post that he cannot access the bootloader screen, meaning, its already bricked, the PC wont even recognize the device when plugged. Basically (correct me if im wrong) the only way to revive it is though JTAG, but looking for the JTAG points is tricky as it require complete dissassembly of you PDA.
Sorry for your loss mate.
Dear Eikichi, EmualDave and all the other who can help me,
I managed to access the boot-loader screen again. Therefore, I can use my SD card to fix it. But I still have a question on how to solve it (sorry, for being so annoying): Do I have to take the *.img file from the Dell homepage and use the tutorial, which EmualDave posted (http://www.aximsite.com/boards/x50-x...-flashing.html) and create the bootloader and OS image? Does anybody know if I can also do it with the file I found (see my threat above) in order to get the german version back.
I am overcautious right now just not to make more mistakes.
Thanks for all your help
Nuye
I still dont get it
Hi,
as I said I can access the bootloader (so I am really relieved). I read somewhere that the bootloader of X50 and X50v are the same so I didnt brick it completely. I tried to create my own *.nb0 files by following the tutorial (http://www.aximsite.com/boards/x50-...w-create-your-own-flash-images-your-axim.html)
but it doesnt work. Everytime I want to create the OS file and select the appropriate block, it doesnt work. I tried several ROM images which I downloaded from the Dell site. Can somebody help me and tell me which ROM image I have to take. Or perhaps somebody has the *.nb0 files already and sent them to me. (that would be great - I only find outdated links).
Thank you very much
Nuye
nuye2 said:
Hi,
as I said I can access the bootloader (so I am really relieved). I read somewhere that the bootloader of X50 and X50v are the same so I didnt brick it completely. I tried to create my own *.nb0 files by following the tutorial (http://www.aximsite.com/boards/x50-...w-create-your-own-flash-images-your-axim.html)
but it doesnt work. Everytime I want to create the OS file and select the appropriate block, it doesnt work. I tried several ROM images which I downloaded from the Dell site. Can somebody help me and tell me which ROM image I have to take. Or perhaps somebody has the *.nb0 files already and sent them to me. (that would be great - I only find outdated links).
Thank you very much
Nuye
Click to expand...
Click to collapse
MUCH EASIER WAY
Get another X50 to borrow
Run the WM6 ROM update for the working X50
When It comes to the "UPdate" Button
Remove the working X50 mand put your own on the cradle
Hit Update.
Do a Hard reset
The X50 is now Un-bricked and has WM6 Installed!!
However, please use the working one to charge your battery, because when it's bricked the battery will not charge
reggaepoo said:
MUCH EASIER WAY
Get another X50 to borrow
Run the WM6 ROM update for the working X50
When It comes to the "UPdate" Button
Remove the working X50 mand put your own on the cradle
Hit Update.
Do a Hard reset
The X50 is now Un-bricked and has WM6 Installed!!
However, please use the working one to charge your battery, because when it's bricked the battery will not charge
Click to expand...
Click to collapse
Err the x50 doesnt have a wm6, (correct me if im mistaken) its the x50v which has unofficial WM6 and flashing both x50 with a rom not intended for it will make matters worse than it is already.
It vdoesn't matter WHICH rom u flash it with.... so longst as its a working rom for the device. It wan be a WM5 rom as well. The TECHNIQUE is what matters here. I can see that you are not exoerienced in these things
Bless
reggaepoo said:
It vdoesn't matter WHICH rom u flash it with.... so longst as its a working rom for the device. It wan be a WM5 rom as well. The TECHNIQUE is what matters here. I can see that you are not exoerienced in these things
Bless
Click to expand...
Click to collapse
im not stupid ok, i have no qualms with your technique, im only informing you that there is no wm6 for x50, get it?
Bricked my x50 too
I have exact the same problem, ****ing ebay scammer sold me a wm 6 upgrade for my x50 but what i didnt know is that it was impossible to upgrade an x50 to wm6, i think he gave me an x50v update because i can get into the boot menu
Usb wont work becouse my pc wont recognise my x50 when its in boot menu
If anyone knows a solution for this ...
Thanks in advance
wow, i keep on saying this everywhere, if you are not experienced enough to tell the difference between a x50 and an x50v (especially when it says it on the front of the device in plain letters) then you should not upgrade your ROM! it is only for advanced users! i dont mean to troll or flame but if you dont even know what device you have you should not do a ROM upgrade
btw, it is spelled thread not threat. the word threat has a COMPLETELY different meaning. it even says at the top of the page to reply to a thread it says "Reply to Thread" not once, but twice
What is the hardware difference, then, between a x51 and x51v? Would it be difficult to make a x51 version, much like football's x51v ROM?
http://forum.xda-developers.com/showthread.php?t=391392
xd1936 said:
What is the hardware difference, then, between a x51 and x51v? Would it be difficult to make a x51 version, much like football's x51v ROM?
http://forum.xda-developers.com/showthread.php?t=391392
Click to expand...
Click to collapse
X51 is QVGA, X51v is VGA. They have different CPU and GPU.
Since posting that, I've come across this knowledge... I wasn't aware of the different CPU and GPU at the time. Thanks
Hi all new? here got an o2 orbit need advice?
Im just wondering what i could and should do to improve it, its currently runnin on wm5 i have the official file to update to wm6 but dont want to lock out my orange sim card ?
any advice ?
Hi can i install these special roms on this site without messing up the usual features on my phone . Pleases help?
Yes you can. Make sure you unlock the CID first: http://forum.xda-developers.com/showthread.php?t=308242
Cheers m8 so which rom is recommended at the moment and i wont mess up my phone will i as im unlocked o2 at the moment. Also can i backup my rom im using now simply?? thx again
I have the same phone on o2, (I didn't know Orange done this phone ?) anyway, I would reccomend this ROM, its what im using.
http://forum.xda-developers.com/showthread.php?t=342298
It is based on Windows mobile 6, and has all extra toys to play with.
Read the post, see if you like it (its best one IMO)
Download it, do step one first (This is CID unlocking), then step two (flash the device).
I think you can backup your device now but it depends on what you want to backup.
If you mean backup your contacts, SMS messages, photos ect then sure you can. Copy them with activesync or search google, there are many programs out there.
If you mean backup your device entirely (As in ROM) im pretty sure you can but its not needed. You will find on this site both the offical ROM that your phone came with WM5 so you can go back to that, or the offical ROm for WM6 so you can go back to that.
All custome ROMS are SIM unlocked so you will be able to use your orange sim card.
Hope this helped.
Hey Everybody,
Heres a big hello to everyone, this is my first post here. My brother gifted me a Dell Axim x51v with Windows Mobile 6 Classic installed on it. He flashed it himself earlier on. Now, I'm wanting to install Windows Mobile 6.1 on it, but am pretty much lost on how to do so. I've never flashed my Dell before, so have no clue about it. If anyone could refer me a guide to do so, or help me out with it, it'd be much help!
Which is the best ROM to install? I've read up and seems like Lenny's is the best to Install. Is it stable on x51v?
Any help will be much appreciated,
Thanks in advance,
Regards,
Sibot
You might want to have a look at this
Lennysh, didnt try them yet but Makuu has a sweet one out now with Voip embedded. Looks pretty sweet.
Hey, Thanks for replying. I'm looking into the football version. I don't really require VOIP support apart from Skype.
The football version has A03 and A07. Any idea which is the more stable version?
Also, I have 2 memory cards. CF and SD card.
On my CF card I store some programs. I plan to flash the ROM using SD card. Do I make sure that the CF card is not in the Dell Axim while flashing? Also do I delete the "Program Files" folder in my CF card on the new install?
Is there any way I can take a back-up of my current Dell Axim ROM? Incase if I mess it up, I can load it back on? I remember there was FUBAR when I used to flash my Siemens Cellphone, like a backup.
Regards,
Sibot
Do you mean all the files included in the rom image or all the files (ones that came with rom AND personal files)? If just the files in the rom image, you just need the nb0 file for a backup. If it's everything, use a backup program like Data Backup (not sure if came bundled with rom, ususally has) or SPB Backup.
Hi!
How i flash my Axim with CF card?
Thanks ;-)
So I got it brand new, I am trying to get basic windows executables running. I was wondering if anybody could recommend me with any good ROM images. I have the original ROM, but the PDA dosent see it for some reason.