Someone sent me a PM and I tried to reply, however, I noticed it's now sitting in my "Outbox" rather than in my "Sentbox". When I open my reply message, I don't see any button that says "Send". Is the system on some sort of timer to send it out, or am I doing something wrong?
If you have opened the message, clicked reply, composed your reply then hit submit, it should be sent, however i have noticed that messages I send tend to sit in the outbox until collected by the recipient, then marked sent.
Related
I'll keep it simple. I get that error message every hour or so, but i have NO text in my outbox, or drafts, or deleted, just inbox. I even deleted all of them from my inbox and it still says it..anyone else have this problem. specs on what im running in my sig.
Please do not make new threads read the wiki and do searches before you post
I did and didn't find anything, thats why a made a new post
I get this message when i try to send a text to multiple contacts on Black2.5 but the thing is they recipients are getting the message. I resend and they get it again.
Get dinarsoft's mem maid and do a reg clean, see if that helps
yea sometimes i'll send a txt and it will sit in the outbox but the recipient got it...eventually it will move to drafts and ill get the same message, but when i delete it i still get it.
Hi all,
I have LVSW WM6 and I can create NEW email and send it using Pocket Outlook. However, if I want to send an email via "reply", I kept on getting a message that says:
The message could not be sent. Check that you have network coverage and that you account information is correct. Then try sending again.
I have good 3G coverage and can browse the Internet via PIE or Netfront. I have enabled POP in my GMail account.
Is there a particular POP setting that I must configure in WM6 for sending replied email via GMail?
Kinda funny, i had no problem until a couple days ago, with my gmail accounts, to send messages. Not exactly same problem, but the message is the same. My WM6 is Black 2.5.
hknoener said:
Kinda funny, i had no problem until a couple days ago, with my gmail accounts, to send messages. Not exactly same problem, but the message is the same. My WM6 is Black 2.5.
Click to expand...
Click to collapse
Couple days ago? Did you made any changes to the device before this happened?
I wonder if this is caused by GMail and have nothing to do with WM6...
hknoener said:
Kinda funny, i had no problem until a couple days ago, with my gmail accounts, to send messages. Not exactly same problem, but the message is the same. My WM6 is Black 2.5.
Click to expand...
Click to collapse
I had the same problem, and the solution i found is the following:
When you press the reply button you find: "Edit the sender's message" underlined.
click on it and the original sender's message will open fully
Now you can write your reply and send it well
Thanks a lot pasil.pt it seems to be the solution!!!
I had very same issue. Using gmail on Treo800/winmo 6.1, I get a message that refuses to send. Once stuck in outbox, nothing will send unless I remove it. Every time this happened I saved the offensive msg and now I have 7 of them. When I retry send any, each one fails. These are the facts for my case:
1) It happens on some messages.
2) Happens when replying or forwarding.
3) If I delete the content, the msg sends fine. At least, I can rule out problems with msg properties and header.
One thing I noticed when comparing native PO to FlexMail, is FM defaults to indenting the original msg using '>' character. PO does not. Since FM can send all these 7 msgs fine, I thought this should be good start to investigate.
So I grabbed one of the bad msgs and I indented it manually line by line and to my surprise, It sent successfully. I repeated this with each of the 7 msgs and all sent just fine.
PO does not have a UI control to toggle the 'indentbody' and 'indent character' features, but I did see there are some registry keys related. However, I could not get these keys to work.
HKCU/sofware/microsoft/inbox/settings
--> AddLeading
--> IndentBody
--> LeadChar
I can not get my changes to stick and not sure how to enter a 'dword' value for the above.
Can someone please help me find out...
- steps in changing above values and make them effective
- how to enable body indenting, make e.g. '>' the leading char using dword values.
I could not find a tweak tool to do this as well.
Any assistance will be highly appreciated.
Same issue. Very frustrating. After reading last, i tried deleting the original text (below but not including the header) and the message sent fine.
Hey folks,
This is my first post and I looking for some assistance.
I seem to have a strange problem with my messsages but it only happens with one particular contact and its doing my head in.
I am using the Chomp App and I think its great but the problem I have is one of my friends (who is on the orange network) when he sends me a message and I try to reply to him the message fails. When I check the view message details it shows his telephone number as 44XXXXXXXXXX it has removed the + sign from in front of the number.
However if I go into the failed message and select forward the message sends no problem and + is in front of the number.
I have checked his contact details on my phone and they are fine and if I send him a normal text it sends, the problem only seems to arise if I try to reply to the message he sends me.
Anybody got any idea how to fix this ????
I appreciate any replies
thanks
Apologies if this has been in here before, couldn't find my issue with a quick search.
Right, basically the issue I'm having is that for some of my contacts, when I try to reply to a text it won't send. This isn't the error I've seen before of numbers not being formatted properly and a failure to deliver message, it's different: When I receive a text and compose a reply, nothing happens when I hit send! Te send box lights up, so it knows I've pressed it, but nothing happens (is if it were never pressed at all). The message still just sits there in the compose box waiting to be sent. The only work around is to save it to drafts and then reselect the recipient and send it from there.
Now, I have yet to try an alternative SMS app, or troubleshoot my installed apps. I'll do that if no one else has come across the problem before.
Is this a problem other people have experienced or is it just down to my individual set up?
Any help much appreciated, thanks!
Chaz
I sent someone a PM earlier and got a response. I responded to that, but there's no evidence of my response as part of the thread in either my Inbox or Sent mailbox. That didn't seem familiar from prior experience, though it had been awhile since I'd PM'd here. So I resent with the same result. So far, no response from the recipient, so since I don't see evidence of my outgoing message, I don't know if it went where it was directed or not. Should I be seeing evidence that my message actually went out? Shouldn't I see my message in the PM area somewhere?
maigre said:
I sent someone a PM earlier and got a response. I responded to that, but there's no evidence of my response as part of the thread in either my Inbox or Sent mailbox. That didn't seem familiar from prior experience, though it had been awhile since I'd PM'd here. So I resent with the same result. So far, no response from the recipient, so since I don't see evidence of my outgoing message, I don't know if it went where it was directed or not. Should I be seeing evidence that my message actually went out? Shouldn't I see my message in the PM area somewhere?
Click to expand...
Click to collapse
Resend your pm.
Sent from my PH-1 using Tapatalk
maigre said:
I sent someone a PM earlier and got a response. I responded to that, but there's no evidence of my response as part of the thread in either my Inbox or Sent mailbox. That didn't seem familiar from prior experience, though it had been awhile since I'd PM'd here. So I resent with the same result. So far, no response from the recipient, so since I don't see evidence of my outgoing message, I don't know if it went where it was directed or not. Should I be seeing evidence that my message actually went out? Shouldn't I see my message in the PM area somewhere?
Click to expand...
Click to collapse
go to the following link (be sure your logged in to XDA first)...
https://forum.xda-developers.com/profile.php?do=editoptions
... scroll down to the last option under the "Private Messaging" category and select the option "Save a copy of sent messages in my Sent Items folder by default" then scroll down and select "Save Changes".
Also, when you are creating a new private message, and you scroll down, you'll see the "Additional Options" area that has some options like saving a copy of your sent messages. These are only the options for that specific message.
Unless you change the default to save Sent messages as explained above, you'll need to select to save them for each message.
I hope that I had explained this okay via text...
Good Luck!
~~~~~~~~~~~~~~~
Sent using The ClaRetoX Forum App on my SM-G900V device.
Ibuprophen said:
go to the following link (be sure your logged in to XDA first)...
https://forum.xda-developers.com/profile.php?do=editoptions
... scroll down to the last option under the "Private Messaging" category and select the option "Save a copy of sent messages in my Sent Items folder by default" then scroll down and select "Save Changes".
Also, when you are creating a new private message, and you scroll down, you'll see the "Additional Options" area that has some options like saving a copy of your sent messages. These are only the options for that specific message.
Unless you change the default to save Sent messages as explained above, you'll need to select to save them for each message.
I hope that I had explained this okay via text...
Good Luck!
Click to expand...
Click to collapse
Thanks for that. Clearly stated. I just set it so that there's a permanent save to the Send folder. I'd done Quick Reply earlier, where the save option isn't present, so it's no wonder I missed it there.
sd_shadow said:
Resend your pm.
Click to expand...
Click to collapse
I did that, too.