How can i hear my tomtom navigator in my bleutooth headset ????
You can't I have tried also
Currently you cannot hear anything except for voice communication through the headset
bluetooth kit for car.
Hi, I installed the AudioBlue kit for my car and I can´t control the xdaII completely, only make and receive calls. It´s because the kit prompts when pairing devices to select a level of control for the xdaII. U can choose between headset control or handsfree control. With the headset control u can only make and receive calls and with the handsfree control level u can download all the contacts to the car and also voice dialing etc The XDAII does not support handsfree, only headset level.
With a Nokia 6250 it works great cause it supports handsfree.
Does anybody know if there is any software arounf for upgrading the xdaII to handsfree control level bluetooth??
Bill
Spain.
same problem
WeatherB said:
Currently you cannot hear anything except for voice communication through the headset
Click to expand...
Click to collapse
. I have the same problem I've been looking for a fix to,any help would be appreciated.
Related
Hello together,
because I want to work with Voice-Dial controlled from a BT-Headset, I try to find a solution for upgrading the BT-stack.
Also would this allow to use BT-Headset for music and video....(Mediaplayer,etc.)
Did anyone have an idea in which way we can integrate a headset-profil??
May be, anyone can post the related files and registry-entries from a other device, that uses Widcomm/Broadcom-Stack.
Thanx
Delfin
Handsfree - would be nice for the BMW Car BT as well
Yes, the handsfree Profile in the MDA III is missing and it hurts badly. I can't make it work with my BMW BT Carkit.
Does anyone know how to integrate Handsfree into the MDA III?
I alos would like to see this get fixed.
Just before this site had technical difficulties and lost several weeks worth of posts, there was a thread on this very topic.
It seem to me that progress was being made, but the current BT Profile only allows for Phone audio, not audio from device.
Even the not so good iPAQ 6315 had audion from device support.
I suppose first that I-Mate should fix the BT Profile all together, which is unstable on my PDA2K.
Just to clear this up....
The PDA2K does have handsfree profile. The profile only supports handsfree for phone.
What everyone is asking about is the ability to transfer audio from device to a bluetooth device (headset etc.). Is this profile called handsfree or something else, have read posts where someone mentioned it was called a different profile name?
Nighthawk said:
Just to clear this up....
The PDA2K does have handsfree profile. The profile only supports handsfree for phone.
What everyone is asking about is the ability to transfer audio from device to a bluetooth device (headset etc.). Is this profile called handsfree or something else, have read posts where someone mentioned it was called a different profile name?
Click to expand...
Click to collapse
...Hmmmm....
In a recent online conversation with a "club i-mate" tech rep- I asked about the so-called "Hands Free" profile they advertise the PDA2K as being compliant with....
ME: "My other bluetooth phone would allow me to simply speak the contacts name via my wireless headset and the phone would dial.....With my PDA2K I have to actually use the phone to dial out.......This is not a 'TRUE Handsfree OPeration'....."
Club i-mate: "True."
ME: "So the PDA2K doesn't really support 'Hands Free' profile as advertised, but rather ONLY 'Headset' profile?"
Club i-mate: "Yes."
I have been VERY pleased with all of my PDA2K EXCEPT for the Bluetooth functions. They totally dropped the ball with the Bluetooth on this device....
Interesting news.
Have you tried with voice software on the PDA2K?
Tomorrow (Saturday night now) I will break out the car kit and headset and see what I can learn. The car kit (nothing special, just Supertooth) allows both headset and handsfree, different button combo to activate.
Nighthawk said:
Interesting news.
Have you tried with voice software on the PDA2K?
Tomorrow (Saturday night now) I will break out the car kit and headset and see what I can learn. The car kit (nothing special, just Supertooth) allows both headset and handsfree, different button combo to activate.
Click to expand...
Click to collapse
Yes, I have Microsoft Voice Command on my PDA2K.
However, It requires activation by pressing a button on the PDA2K- and will only accept voice commands directly- via its own microphone- It will not activate/accept speech via a wireless headset, like ALL my previous bluetooth phones....
Again, this is not a true hands free mode- and it is entirely a limitation of the firmware/bluetooth radio stack Carrier Devices is using in the PDA2K at this time....
...for instance, with my SE T610, I could leave my phone in my jacket pocket or briefcase- in the trunk of my car, and still activate/voice dial anyone in my contact list simply by pressing one button on my wireless headset....
...as well, I could accept incoming calls just the same, as a tone would be heard in the headset, and a single press would accept the call. The PDA2K will not allow this. My PDA2K will not automatically find/activate my headset when an incoming call is made- it wont even let me use the headset 'unless' I have an active link to it- but when you keep an active link to ANY bluetooth headset and turn the unit off, it will repeatedly turn itself back on and run the battery nearly dead in a couple hours. I discovered this the hard way.
ABSOLUTELY USELESS bluetooth software in the PDA2K.....
I'm using SE HBH60 headset with Qtek 9090, if i receive a call and bt headset is off, i can just simply turn it on and press the button on the headset and the call is answered...If it's on already, i hear a ring in the headset and can answer the call by just pressing the button in the headset.
d3vil said:
I'm using SE HBH60 headset with Qtek 9090, if i receive a call and bt headset is off, i can just simply turn it on and press the button on the headset and the call is answered...If it's on already, i hear a ring in the headset and can answer the call by just pressing the button in the headset.
Click to expand...
Click to collapse
"...simply turn it on AND press a button on the headset and call is answered..."
Would you care to exaggerate here?
When I recieve calls, if I do not have an active link to my bluetooth headsets, I cannot answer with them... I must first go inot bluetooth manager and click on headset and click on 'connect'- which can take more than a few seconds each time I do....
I have tried this woth my Motorola, several Bluespoon's and my in-car handsfree system.... None will work unless the connection was made 'live' before the call, and then the PDA2K will not stay shut off, thus draining the battery...........
babj615 said:
Yes, I have Microsoft Voice Command on my PDA2K.
However, It requires activation by pressing a button on the PDA2K- and will only accept voice commands directly- via its own microphone- It will not activate/accept speech via a wireless headset, like ALL my previous bluetooth phones....
Click to expand...
Click to collapse
I think part of problem is the required button press, which isn't required on your other phones.
BlueAngel and BT Headset
d3vil said:
I'm using SE HBH60 headset with Qtek 9090, if i receive a call and bt headset is off, i can just simply turn it on and press the button on the headset and the call is answered...If it's on already, i hear a ring in the headset and can answer the call by just pressing the button in the headset.
Click to expand...
Click to collapse
When you have your bluetooth headset connected and the PDA enters the standby mode (for example, you don't use it for few minutes), if you receive a call does the headset automatically reconnect?
I'm using 9090 with Nokia HDW-3 BT headset, and I'm in trouble when I put my PDA in stand by leaving BT activated and the headset connected. It seems that after few minutes of standby the headset disconnects, but PDA's BT led is still flashing... Maybe is there any power saving feature in PDA's bluetooth stack so when in standby it disconnects the headset?
BMW bt car kit
The Xda IIs works fine with handsfree profile BT devices (such as car kits), I have personally tried it with a BMW built in jobby (X5) & a Nokia ck 7w. It also works fine with BT headsets.
I can only assume that the other providers/networks have made the same mistake that O2 did with the XdaII, i.e. use the Microsoft BT stuff which does NOT support hands-free, only headset profiles.
Perhaps one of the clever folk on here can suggest a way to get the O2 version on your phones?
BMW bt car kit
The Xda IIs works fine with handsfree profile BT devices (such as car kits), I have personally tried it with a BMW built in jobby (X5) & a Nokia ck 7w. It also works fine with BT headsets.
I can only assume that the other providers/networks have made the same mistake that O2 did with the XdaII, i.e. use the Microsoft BT stuff which does NOT support hands-free, only headset profiles.
Perhaps one of the clever folk on here can suggest a way to get the O2 version on your phones?
Also microsoft voice command does not support activation by bluetooth headsets, its not a fault of the imate, just no software to accept the voice dial command from the bluetooth headset
BMW BT with XDAII?
Would you please irblinx be more specific about how have you been able to made ANY kind of call through your XDAII?
My BMW series 5 built in BT hands free simply fails to Connect to the XDAII. I'm carrying a SE T68 just to use my car hands free system. Stupid way of using an 1000+ $ BMW extra.
Any help is wellcome!
:?
some confusion here (at least partly due to O2 giving the new model a confusing name!), the xda II does NOT work with car kits.
Only the new IIs works
Headset profile for PDA2K/9090
Sorry for my poor English
I need "HEADSET profile" for my PDA2K
Now all headset work with headset and hands free, but i nead "force" the headset mode with PDA2K
In headset mode (no hands free) I can use one headset for more devices, like PDA2K, notebbok, cellular phone.
In hands free mode the headset work with a device at time.
Regards
Hi all,
There was problems with the BT Stereo headsets for 02 ATOM with the previous ROM. I would like to poll everyone's opinion if the latest ROM updates have resolved the problems, and which headset is now working beautifully with ATOM.
Please advise, thanks!!!!
itech BT stereo headset works good with my Atom
BT headset Logitech 0228A works fine
BT headset Logitech 0228A works fine
Voice Dialing Not Working
My Plantronics 640 headset works well, but my Voice Dialer thru the BT headset doesn't work with the 0402606 ROM--though it did with the original 0102306 ROM.
Any resolutions?
anyone try with Samsung SBH100? It is a A2DP spec stereo headset. BT 1.2.
Using Motorola HS850 easy connection no problem. But can't get the voice dialing to work.
Jabra BT620s w/ latest firmware
* A2DP - ok but random hiccups. Perfect quality with Pc
* Vol - Too soft on Atom, had to preamp. Perfect quality with Pc
* AVRCP - Perfect but only in WM10
* Phone - Sometime fail to answer a call by headset when music still playing, must manual
We wish the next firmware would improvise the A2DP, great feature but buggy...
bro, how much u paid for the jabra bt620s in SG?
Third headset and no success
I need a small headset, what I can use for Skype on my Atom and to listen to mp3. How's the Plantronic 640 working? Does it support the A2DP profile? I don't wanna have one of these big Stereo BT Headsets... I also tried the btaudio program, what works perfectly for the sound, but the mic quality is too poor, nobody understands me by using skype...
Please give me your recommendations which one works 100% and supports all the features...
Thanks
Ellork
Motorola HT 820 works great with Atom Exec. Audio is loud and clear with lots of bass, and WMP 10 pauses on incoming call (press left button to answer) and resumes after hangup (press left button again). Good thing is you only hear beeps for incoming call not a 110db ringtone...You can use your Atom charger to charge the headset too.
???
hi guys, "BT headset" + Atom will get "real" stereo sound, right ???? I know that Atom does not have bluetooth with "A2DP".
I have a Helmi Broadcaom BT stac on my Universal. A day ago I 've bought a BT stereo headphones type Siemens HHB-750. It has function both HF and Hi-FI stereo ouput. The enigma is that the headphones works gerat as a stereo wireess, but I cannot put it to work as HF. When a call comes or when I dail a number I can hear from headphones a gently noise, but voice is still heard form Universal's speaker. I 've tried with another BT HF and I've got the same result, eg. Universal can detect the device, can connect itself with it, but during a call it cannot switch sound form bulid-in speaker to a BT headset working as HF. What to do?
Hi there, have you verified that you BT headphones have all their functions enabled in their profile?
Open the comm manager, Bluetooth settings, look for your phones (with the phones on, update the available services if needed), tap on all the services they suppose to have.
Hope it helps.
Alas not... I've activated all the function of my BT hHeadset ie. high quality stereo output and HF. The first function works great, the second one is still dead :-(((
First of all, I would like to says big thank to all rom cooker. You all did a very great roms. However, I still have a little problem that annoy me a lot...
I had connected the stero bluetooth headset with Hermes and choose both "Wireless Stero" and "Headset" profiles in bluetooth setting.
Then when there is incomming call, the Hermes will not ring. So I had a lot of miss calls.
However, if I disable the "Wireless Stero" profile in bluetooth setting, the Hermes will ring normally.
I used to use the Prophet before and there is no problem. The Prophet will ring normally although I choose both profiles.
The stero bluetooth headset is the same, iTech Clip Radio.
I had tried on many roms and found the same problem. So I guess that maybe I have to modify the registry setting to enable ringing on "Wireless Stero" profiles. Can somebody help me to solve the problem please???
I have the same issue and assumed that's how it worked since I just got this Jabra BT8040 that supports wireless stereo. It would only ring through my headset when wireless stero was enabled. If there is a way to get the phone to ring also that would be great. Right now I do the same thing as you, disable the wireless stereo until I need to use it.
My guess is this is by design since all sound is routed to stereo headset then so would the ringer. This isn't an issue for me since the Jabra BT8010 I can turn on/off stereo by simply pressing a button on the headset.
Sorry don't know of a solution.
Thinking about it I guess you could use something like mortscript and make a button that turns stereo pairing on/off to make it simpler I dunno.
I have similar issues with the PAYS rom, when listening to music via my BT earpice (Jabra) where you click the answer button on the earpice it then takes the music from the device and plays it through the jabra ONLY for about 5 seconds and then defaults back to the device?
Any suggestions would be appreciated?
in my tp2 i noticed that when i have a wired or bluethooth headset conected and someone calls me it only rings in the headphones! this made me lose several phone calls.
in other devices i had , i used a reg hack for it to ring in the device speaker and headphone,so i tried in my tp2 but it does not work as the reg hack is related to the microsoft bluethooth stack.
therefore i m asking for help and also if other tp2 users can confirm this issue.
my bt heaset is a jabra bt3030.
thanks
I am having the same problem with my TP2, the headset becomes useless for this reason.
I use a Sennheiser MM-200 headset, bought this headset not to have earphones plugged in ears all time but only when i have incoming call.
Not sure what to tell you about the wired headset, but is your BT using the normal headset BT profile or is it connecting also with A2DP/Stero BT? That could be part of the problem.
In the Bluetooth menu it is connected with: "Stereo Audio" and "Hands-free"
you can switch off the stereo audio function and stay with the hans-free function only. it works fine, but you have to do it manually.
wolfgang
I made a soft reset and now the phone rings even with stereo audio enabled - whats good for me, but i do not understand why
Hi Faria,
There is a setting in the BT config to transfer "ALL" system sounds to the connected audio device, this may be your issue. I don't use a wired but my Rhodium rings in the headset and on the device after removing this option.
Cheers,
Beasty
I really hate this feature too. I am used to listening to music on my BT hedset. So when I get home I would just take them off, put the phone on my desk and go about my business. But if I don't disconnect the headset now I won't notice it ringing... which can lose in lost phone calls.
Hopefully someone will find a workaround.
Start>Settings>Connections>Bluetooth
First tab (gears)>Advanced>Audio
"Play system sounds on remote hands-free device" = uncheck
Just tested and works for me.
I get the normal ringtone from the phone and the regular "beep" from the stereo headset.
FYI, this is basically the same information as listed two posts up...
On my old phone if my headset was in and my phone rang it would say call from and state the persons name through my headset. The ringer itself wouldn't play through my headset nor the phone. And now I can't remember but I know it beeps in my ear but I think the phone plays the actual ringer also at the same time. But if I checkmark what you guys are unchecking will the actual ringer play through my plantronics bt headset and not on the phone.. I kind of would like that for if I am out and dont' want my phone to ring all loud I would rather the ringer play in my ear and was wondering if that's what happens when I check that. Mine was unchecked when I got the phone.. I don't havea bt headset I use for music just talking mostly when driving..