Hi,
I have problems connecting to my bt headset since I have installed TomTom3. I am running the build3500 bluetooth stack from the 1.06.02 FRA radio. It was working fine without even losing connection with the mda, but after I installed tomtom, it can pair, but cannot connect. The weird thing is that I can sync using bluetooth. I suspect tomtom is keeping busy some of the bt com ports? i noticed that during installation, it required to close bluetooth (cause it said the file BtcoreIf.dll was in use) and as soon as I did that, it finished installation, but since then the headset stopped working. Anyone has similar problems??
Thanks in advance for any input.
Update
Managed to sort it out by upgrading my BT stack to 1.0.0.3900. Still cannot find any similar complaints in any forums. Can it just happen to my MDA III? Who knows....at least it works now, even if my engineering background is not happy with it :shock:
Upgrading the bluetooth stack
Hi,
I have exactly the same problem as you had, although I'm on the UK network Vodafone and have an XDA2s.
My current radio version is 1.06.02 but I can't fine what version my bluetooth stack is. How do I upgrade to 1.0.0.3900?
Thanks in advance for any assistance you can provide.
Hi,
I am using Qtek9090 with TomTom 3.07 and Jabra BT800 headset and have not the problems you people talk about here. I have to mention that I immediately updated my BT version from 2400 to 3900 the same day I purchased the whole stuff. I was - when I was in the shop - told that TomTom 3.07 can sometimes cause problems due to BT version of Qtek (1.0.0.2400) and I better upgrade it to 3500 and/or 3900. I was also told that there were known problems with earlier versions of TomTom wireless (like in your case TomTom 3.03) and that I (at least) had to use TT 3.07 and/or better upgrade the BT driver of my Qtek9090. In order to find your current BT version:
- Click on Bluetooth icon
- Select Bluetooth Settings
- Go to [About] tab
- And there you see your own Build
- You can also select [Advanced] button in [About] for more details
Anyway, once being at home and taking my device out of package I did a BT upgrade to 1.0.0.3900 right away and so far I have no issue with BT stack. Even Jabra BT800 which a lot people complain about works fine with my Qtek9090 (OK, I admit the CallerID at Jabra still not working but I already expected that).
I downloaded the 3900 version of Bluetooth driver (plus another Audio driver) at the following URL in The Netherlands: http://www.pdanieuws.nl/modules/mydownloads/singlefile.php?lid=37
kind regards,
- Avareh ([email protected])
tomtom gps
The problem is that tomtom is messing around a bit with bluetooth for bt gps receivers.
So after installing tomtom allways reinstall the latest bt drivers.
AFAIK you should always use TTN 3.07 (GPS and Navigator) on SE and Phone Edition devices (Blue Angels is both WM2003SE and Phone Edition)
Big Fat TY
I was getting stupid before reading this 3d.
Even went back to the shop with the motorola headset and had them show me it was working....
Tom Tom was the reason.
Avareh said:
I downloaded the 3900 version of Bluetooth driver (plus another Audio driver) at the following URL in The Netherlands: http://www.pdanieuws.nl/modules/mydownloads/singlefile.php?lid=37
kind regards,
- Avareh ([email protected])
Click to expand...
Click to collapse
This link is not working at the moment, is there another link for this, i am running an xdaIIs and installed navigator3 and could bond but not connect to my bt headset.
will try the stack upgrade also a link fopr nav3 3.07 would be handy too...
cheers.
all sorted now, have got the files and fixed the issue.
If you do let me know if it works the way it should
I'm still having problems using my qtek 9090 on my 3 series BMW with a original BT carkit...
If yours works fine, please let me know wich software is on your PDA and which type of BMW you drive..
I have the following problem... The only way it works is; when I first swich on my car (so also the carkit) and then I activate the bt function on the pda. I also have a solution. That the bt function on my pda is off when the pda is off, but nobody can tell me how this is possible.
Thanks
I can use it as a dumb carkit but it does not sync the addressbook or the SMS
I have a Qtek9100 WM5.0 os 5.1.70 (Build 14420.1.1.0) ROM 1.1.7.5, radio version 01.01.10 and the car is an X3 330D
I found on several forums that you need to be at a higher version.
so if anyone knows how to only upgrade the Bluetooth or a sollution for us
is there somebody here tried software like BTaudio, BTToggle, bluemusic, or something else (if any)??
i tried all those software to my BA with win 2003se but all weren't working, and after i upgrade to wm5 (helmi with new bluetootoh stack) still not working. but actually those software working with other pda with wm5 (like xv6700 and i730)
note: there's no problem with stereo headset like i-tech r-35 and jabra BT620s
but i my mono bluetooth (jabra bt110) working also, because its small and using standart battery a3
thanks for any help
Qprett
I've tried with Bluecast, it works on my Qtek 2020i which uses WM2003 SE
http://www.simplesmartphone.com/BlueCast/
I recently installed the HTC WM6 ROM and was pleased with its speed etc. however the bluetoth has changed in some way and I was unable to use my Mototola handsfree car kit. I then tried the B&B 3.7 and had the same problem.
Is there a workaround i.e. have the wm6 rom with the old bluetooth ?
Thanks in advance for any help!
Some car-kits show as a headset, some as a hands free. The WM6 blutooth only seems to recognise Hands Free. My car kit does both, On Nokia it shows both, on WM6 only Hands Free.
Does anyone have a Headset Stack?
WM6 and car kit!
I have the same problem! If i activate the hansfree e deactivate it works! Is a motorola a like carkit! Can sameone help me? Tks
I have the cheapo aldi BT car cd radio. If I turn the radio on then the BT on my phone the radio mutes. But if I do it the other way round, ie BT on then turn radio on, it worls fine
hth
After upgrade to the official HTC WM6 ROM (spanish version) my integrated bluetooth hansdfree CAR-KIT doesn't work anymore (with WM5 the system works perfectly).
The car is a new CITROËN C4 Picasso, but i think this problem must involve any new PSA Group Car (CITROËN, PEUGEOT...) that mount the same kit.
I can pair the CITROËN hansfree with the TyTN, and both connects (i can see the operator name, the battery level, and the signal level, that WM5 stack doesn't show) but when i try to call, or i receive a call, there is no sound throw the hansfree system.
I also have tried the Jetware bt extension with no succes.
At now i had to downgrade to WM5 because this problem (i need the handsfree working).
The cuestion is...
Is it possible for a ROM MASTER to extract a previous bluetooth working TyTN stack to overwrite the stack that comes with official WM6?... (the WM5 or any working WM6 working stack).
Thanks
The same problem here with the same car; also the Artemis on WM6 (I tried several roms) has no sound.
Downgraded to WM5, and it's all working again.
Not yet tried to get an update for the car; maybe there is also a solution.
I have the same problem with Motorola HF-850 car kit. I'm about to downgrade too. This sux.
Same issue here with Nissan Sentra 2008.
I can dial and receive calls but the audio works about 30% or the time. It is hit or miss.
Same here in a 2007 UK CITROËN C4 (5 door hatchback) with factory fitted Bluetooth car kit, using an Orange M3100 with the Schap's WM6 Pro 3.60a ROM. Looks like I'm going back to the Orange WM5 ROM as this is a deal breaker for me. Very disappointing.
try this
I had similair problems a few pretty good solutions:
-jetware search google i use this one
-Solution:2
Change the COD (Class of Device) from a PDA device to a smartphone device.
This can be done this way:
1. First make sure you've got a backup, or remember all settings you change in the registry.
2. Edit with a registry editor the following key:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\SYS\COD
By default my vario II does have the value: 1048852 (decimal)
Change this to: 5374476 (decimal).
3. Soft restart your device
4. Voila! Your device now identifies itself as a smartphone
see this thread
http://forum.xda-developers.com/showthread.php?t=290871
Thanks!
I tried the Jetware solution: no luck.
I also tried the COD trick: very strange result, I was able to make just 1 (one) call and other calls were again not possible (no sound).
Maybe there is a solution in updating the software of the handsfree set in the car. I will ask my Citroen agent to do this, if possible.
I will post the results.
I haven't tried the COD trick, but I don't think this will work. It's not a case of my car 'ignoring' my M3100... it pairs OK, and the car's display shows an incoming call, allows me to pick it up, etc, but no sound comes out of the speakers and the other party doesn't hear my voice. It's like the car is receiving the data stream to tell it what's happening on the call, but not the sound.
I don't have any of these problems with WM5, I don't even need to use the JetWare solution.
same problem with Peugeot 407
Same problem here with Peugeot 407
What I found is that if I start a call without Bluetooth and start Bluetooth during the caal, the sound works perfectly. Every next call has the same problem as before though.
TyTN; WM6 Schap's 3.60a;Radio 1.47.00.10
Hi.
I am with Motorola's HF-850 car kit and I get the sound only after 8-10 full seconds from answering. It is so sad that I have to say "wait....wait" every time I answer a call....
There is a post on this forum that suggests someones got it working with an Audi and the latest Black beta rom...
http://www.4winmobile.com/forums/hermes-black-rom-support/11291-black-x-beta-2-smash-trash-11.html
Anyone tried this?
This post also suggests that the newest Black roms may have fixed the issue
http://htc-devs.com/forum/index.php?topic=42.msg321;topicseen
Here's hoping!
That will not work on the Artemis
But I tried several WM6 roms, including the Black & Blue 4.1: no luck.
Looks like a real WM6 issue, as it's happening with several phone models.
UPDATE: No software update for the factory Citroen bluetooth handsfree according to the local dealer; so that's no solution
I have tried 5 of the latest roms yesterday including all the fixed mentioned in this forum. The best I got was with Sleuth rom where I get audio about 50% of the time. Answering with that rom results in a 5 seconds delay before audio connects causing me to yell "wait, wait, I am here ... "
I even tried a blootooth stack from Broadcomm but the result was not better.
Out of desperation as I bought this car specially for its built in bluetooth kit, I downgraded to Cingular Mobile 5 Rom version (2.15.502.3)
I am surprised and kind of thrilled to report that my 8525 and the car kit are working perfectly together and reliably.
There must be either a bug or a setting/configuration issue on the Mobile 6 bluetooth stack that caused this issue. I am unfortunately back to mobile 5 for the time being until this issue is resolved.
SPV m3100, CK3100 AND WM6
I have an Orange SPV M3100 in Spain with WM6 and i have the same problem. With WM5 and Jetware estension, i had to pair parrot and pda manually every time i got into my car, because they did not connect automatically (Blueetoth-->Devices-->Parrot CK3100-->FreeHand-->OK), but then it works well and i could receive and make phone calls.
But since I upgrade to WM6 i have to pair it manuaaly too, they connect, but it only works from time to time; most times, if i make a call it dials but i cannot speak and people does not hear me; if there is an incoming call, I see the number in the displsy but i can receive it.
Anybody with WM6 and Parrot Ck3100 works well?
I have the same problem with a Mio C520 SatNav. Its bluetooth handsfree works fine with WM5 but not WM6.
I also posted this on a thread on bluetooth headsets, http://forum.xda-developers.com/showthread.php?t=301636&page=6
I tried many different versions. So far with Sleuth's WM6, I had sound around 50% of the time. Similar to one of the previous posters.
Until there is a fix I will have to go back to WM5
I use a parrot car kit and it works fine. However, I noticed some new functionality on my lcd, like displaying battery and signal levels which was not available with the original WM5. That was available only with specific phones. Based on that I believe that a firmware update of your car kit could solve the problem. The issue is whether this is provided for you and if you will have to pay. Parrot offers them for free and you can upgrade via BT.