Related
---------------2006/May31 Updated---------------------------------------
------------------------------------------------------------------------------
＠繁体字OS
Traditional Chinese ROM <QTEK 130 AKU2 + A2DP +Push Mail ROM>
ftp://[email protected]/Universal/DarkForce_CHS130.rar
＠簡体字OS
Simplized Chinese ROM <QTEK 130 AKU2 + A2DP +Push Mail ROM>
ftp://[email protected]/Universal/DarkForce_CHT_130.rar
PLS use Extrom files which are in above archives to run correctly
See the detaile on next page and use as your own risk!
----------------------------------------------------------------------------
----------------Previouse POST-----No More following ROM----------
it took 2 hours to upload!!!!
http://www.asukal.jp/123/imate13_CHT.rar__65MB
Traditional Chinese130764 Universal
@Upgrade_Utililty.zip
*nk.nbf was my edited ROM of i-mate "JASJAR_WWE_13076_164_10900_wwe_ship" with
the wince.nls and Tarisk Font, enable to encode Japanese/S&T Chinese/Korean/Thailand.
(80% of its interface is Traditional Chinese)
*Radio.nbf and ms_.nbf are not included. pls dl offical one to flash.
*use MaUpgradeUt_noID.exe to make Falsh the ROM.
suggest to connect PC with "Sireal mode" = Light button + Power button +Stylus.
------------------------------------------------------------------
***The Templates.zip and Extrom_Unhider.cab---and Asukal.cab
@while first boot from Flasing ROM, some letters are not discribed correctly,
Such like a ????????. do not care.
@The Doctor Johnson screen to aline the stylus will be come every time after soft reset.
Please delete the short cut of "Welcome.exe" in the \windows\StartUp folder.
No more Dr,Johnson.
@using a Pocket Word, to make New Documents, you will find the error.
You make the "Templates" folder in My Documents with Chines Folder name.
The place the all templates in this archive.
No more error.
@Asukal.cab.==pls install this after finish 1st reboot from installation of Extended ROM files.
Then make soft reset again.
@Extrom_Unhider.cab is to unhide the Extended ROM.
Old Unlocker is not work, just install this cab and make soft reset,
ExtROM will visuable and workable.
http://forum.xda-developers.com/viewtopic.php?p=240986&sid=9e9c8acfa34bb46c11688318be09adb4#240986
Thanks for Mr.sef
Still not perfect and sometimes hang up if you toggle the Today Plug-in.
Pls try as your won risk.
If you feel so bad coz of the OS is not stable, pls use without Asukal.cab.
Less Chinese Interface, but more stable.
or make disable the Device Lock on the Today Screen.
Good Luck
Thanks again for the great word....
Actually I prefer to use English OS interface with the ability to read chinese only.....(I think it should be easiler to build??)
But this one is ok as I didn't install your cab file.
Thanks a lot.
Cheers,
Thanks again , will try today
CJK+Thai wince.nls and font in New I-mate ROM1.3
this is the new one only wince.nls and font, also font registry.
http://www.asukal.jp/123/v13enROM_CJK.rar 65MB
radio.nbf and ms_.nbf for Extended ROM, are not included)
PLS try, so nice! i hope...
1st one i uploaded, if you use Asukal.cab, the more mui can work.
those mui were made from old WM5, so they are not match well with
new os.
for example, thres.dll, old version dll doesnt have "Device Lock",
But new thres.dll have it, so if you use Device Lock on Today, OS will hang up.
Many of dll are different from OLD WM5, i suggest this rom only use for
test.(but without using asukal.cab, not so bad)
Good luck!
The first one after flush look great but install Asukal.cab the today plugin
will be stop try to reset can't be done.
try to install Sino_SIP_No5.zip to hand write , don't work please advise ,
also Monster SIP can't use either , I will text tomorrow and give you freeback
the default chinese input method from dopod 900?
hi asukal,
can you include the chinese input method from dopod 900 to the wwe rom devices?
need it very much!
hanks
Parker
[email protected]
ya, i have found many difference in dll between previouse and new ROM.
so some of mui is not compartible.
i found after made this 1st rom
so i suggest do not use asukal.cab pls, or use 2nd rom.
now i making new mui with dll from new rom.
[email protected]
to inject and enable Chinese SIP from DOPOD will be much hard work.
and i need get full registry and relative dll and dic files.
do someboday sent me a whole registry from Dopod900 chines OS?
i will try but take time and
i am willing to get it for you!
but how?
can you tell me how to do it?
thanks!
Asukal said:
[email protected]
to inject and enable Chinese SIP from DOPOD will be much hard work.
and i need get full registry and relative dll and dic files.
do someboday sent me a whole registry from Dopod900 chines OS?
i will try but take time and
Click to expand...
Click to collapse
Asukal, Dopod files and Modules upload to universal upload folder -- Dopod_files.rar hope that you want
Dopod_files.rar
mwang said:
Asukal said:
[email protected]
to inject and enable Chinese SIP from DOPOD will be much hard work.
and i need get full registry and relative dll and dic files.
do someboday sent me a whole registry from Dopod900 chines OS?
i will try but take time and
Click to expand...
Click to collapse
Asukal, Dopod files and Modules upload to universal upload folder -- Dopod_files.rar hope that you want
Click to expand...
Click to collapse
Excuse me,Would you tell me how to use the Dopod files.rar?
thanks,
but Module and file....i guess those dumped files are dead PE Header.
i need dll with correct PE headers. OK i will dump chinese ROM by my self.
but
i need whole registry value from live device, not from hive in rom.
because all 2bites registries are only in a live device, not in hive.
Asukal said:
i need whole registry value from live device, not from hive in rom.
because all 2bites registries are only in a live device, not in hive.
Click to expand...
Click to collapse
Please pm to me how to get it ,I will doing tonight
Dumping chinese ROM
Asukal said:
thanks,
but Module and file....i guess those dumped files are dead PE Header.
i need dll with correct PE headers. OK i will dump chinese ROM by my self.
but
i need whole registry value from live device, not from hive in rom.
because all 2bites registries are only in a live device, not in hive.
Click to expand...
Click to collapse
That's a great message, I'm waiting your dumper,and tell me how to return to Universal.
Thanks
How to solve inputing Chinese?
How to solve inputing Chinese?
Ce-star or system itself
No SIP for chines in it now.
you must install your favorite SIP.
to get the registry, use TRE (Tascal registry editor and export registry on device,
Asukal said:
to get the registry, use TRE (Tascal registry editor and export registry on device,
Click to expand...
Click to collapse
Done , see your pm
T-Mobile English ROM Bluetooth StereoHead set Profile
Today, the new rom of T-Mobile WWEnglish ROM with A2DP was uploaded.
i injected wince.nls and fonts which can be supported CJK+Thai in that.
uploaded here<no Chinese SIP and Interface,Just encode & font support>
http://www.asukal.jp/123/T-Mobile_A2DP.rar 52MB with MaUpgradeutlity.exe
see the captured screen shots.
http://asukal.seesaa.net/article/14749754.html
<no radio.nbf and ms_nbf were included. you have to dl from
http://forum.xda-developers.com/viewtopic.php?p=246434#246434
or
UNI_TMUK_12032_120_10600_Ship.exe
ROM version 1.20 lower than i-mate 1.30_AKU2
Thanks a lot again. I want the A2DP!!!! Yeah.
mwang said:
Asukal said:
to get the registry, use TRE (Tascal registry editor and export registry on device,
Click to expand...
Click to collapse
Done , see your pm
Click to expand...
Click to collapse
ya, i got it.
but it is not sure it can work or not
must check all regostry one by one.
i tried in my passed, still not good result.
any way, pls wait with long sight!
now i must make many kinds of rom for Japanese guys,
also trying to Get A2DP to i-mate ROM(very low possiblety to get)
also make new mui interface for AUK2,
also have to have a dinner!
also have to ,,,,,,
mwang said:
Asukal said:
to get the registry, use TRE (Tascal registry editor and export registry on device,
Click to expand...
Click to collapse
Done , see your pm
Click to expand...
Click to collapse
i am checking all registry from you.
question, i have found following value.
Is the "HanWang" one of OS SIP, or 3rd parties one installed by you?
[HKEY_LOCAL_MACHINE\SOFTWARE\HanWang]
[HKEY_LOCAL_MACHINE\SOFTWARE\HanWang\HangWang Pen for WinCE]
"Study"="0"
"Sound on"="1"
"Screen segment"="1"
"Default input panel"="0"
"Ink speed"="10"
"Ink width"="1"
"Ink color"="0"
"Ink type"="2"
"Recognizer delay"="400"
"Recognizer range"="600E"
Wait for your rplay.
Hi all,
I am trying to port the mediaplus from AtomLife ROMs which has the second version of mediaplus with icons in circle.
I was successfull in extracting the imgfs.bin but there is onemore file ExROM.img which is not giving up.
I Tried
1. winimage
2. extended drive creator
3. scooter kitchen tools
but i am not able to look into the contents, it has the required _QHiddenPartition directory which has all the theme and image files for FMRadio/Mediaplus and Equaliser.
can anybody help me .
regards
Shreedhara
Mediaplus is very tricky..the images are in Ext ROM..but the links to executables are somewhere from the XIP section..any way keep working
Well
I don't think u understand my problem.
I was able to run the Mediaplus(v1.0) app on my Eten M700 earlier when I had WM5 on my eten.
But after I changed it to WM6, I want something new and hence I am trying to get the Atom Life Mediaplus (v2.0), which is better looking than the earlier one.
But SInce the latest ROM's from O2 have differenct format
It contains
lot of asm.mbss files (Motherboard assembly ) and FLASH.DIO and ExROM.img
with XLDR.nb and EBoot.nb0 files also.
But that Extended rom is hardnut to crack, it does not open at all for any tools we have here.
That'swhy I asked for help, so that I can extract it.
All the nordic user wich have åä and ö in there keyboard often uses "scandivaisktastatur5.cab" (se attached file) to replace the orginal software keyboard in a WM6 ROM. Tho its very ugly and has the old WM5 design I would like to change the bmp picture in the dll:s inside the cab. How do I do that? I can extract the Cab file, and replace the bmp file in the dll:s but how do I make a Cab out of it again? I have tried to change the BMP picture inside the dll and then copy the dll file in the windows directory (where the dll files are extracted by the cab file) but that will not work. Can anybody help pleas??
Hi
I have already tried what you suggests with no luck. This is what I did:
1) Extracted the dll from the cab
2) Extracted the bmp from the dll with resource hacker
3) Edited the bmp in Photoshop (see the attachment)
4) Inserted the new bmp into the dll with resource hacker
5) Replaced the original dll in the cab with the new one
6) Installed the cab
...and it did not work. Maybe it has something to do with signing of the dll or something, I don't know. If someone wants to try another shot, feel free to us the attached keyboard skin.
Regards,
PK
You would have to sign this dll etc, and even then it may not work - if you cook your own rom it might, but have a look at the new app that came out recently to change the Wait cursor. See how that's been signed and the certificates it uses, with an mui file. A similar technique may help here.
V
paalkr said:
Hi
I have already tried what you suggests with no luck. This is what I did:
1) Extracted the dll from the cab
2) Extracted the bmp from the dll with resource hacker
3) Edited the bmp in Photoshop (see attachment)
4) Inserted the new bmp into the dll with resource hacker
5) Exchanged the original dll in the cab with the new one
6) Installed the cab
...and it did not work. Maybe it has something to do with signing of the dll or something, I don't know. If someone wants to try another shot, feel free to us the attached keyboard skin.
Regards,
PK
Click to expand...
Click to collapse
Okaj...I did the similar thing.....but i guess that you need sign it with a certificate...I hav watched a little on that maybe making your own root certficate and sign the Dll with it, but it seams to be very complicated :-(
vijay555 said:
You would have to sign this dll etc, and even then it may not work - if you cook your own rom it might, but have a look at the new app that came out recently to change the Wait cursor. See how that's been signed and the certificates it uses, with an mui file. A similar technique may help here.
V
Click to expand...
Click to collapse
Do you have a link to that??
Found this
http://forum.xda-developers.com/showthread.php?t=321236
So someone know what his doing....i must be possible to do a nordic keyboard them
vijay555 said:
You would have to sign this dll etc, and even then it may not work - if you cook your own rom it might, but have a look at the new app that came out recently to change the Wait cursor. See how that's been signed and the certificates it uses, with an mui file. A similar technique may help here.
V
Click to expand...
Click to collapse
Hi
Thanks for the info Vijay! BTW: I use many of the free tools you have developed for the XDA's! Thanks for the effort!
The wait cursor thing was done on WM5, right? Could we use the same certificates or does WM6 need others?
Regards,
PK
uffe6 said:
Found this
http://forum.xda-developers.com/showthread.php?t=321236
So someone know what his doing....i must be possible to do a nordic keyboard them
Click to expand...
Click to collapse
Hi!
I don't think the German keyboard is excactly the same thing as we try to achieve. the German one installs as an separate SIP. The SkandinaviskTastatur.cab changes the inbuilt default keyboard SIP, but there is definitely possible to learn something from the German one.
Regards,
PK
DEPRECATED VERSION: USE 0.2 BETA INSTEAD
PLEASE NOTICE THAT THIS KITCHEN IS A VERY EARLY BETA AS IT HAS NOT BEEN DEEPLY TESTED
*** USE IT AT YOUR OWN RISK! I ASSUME NO RESPONSIBILITY! ***
Hi guys,
after many days of testing I'm releasing my kitchen for i780.
It is very basic: no gui, only batch Windows scripts.
What you can do with this kitchen:
A) Convert your Part02.raw dumped rom to bin flashable PDA rom
B) Create a dump folder to cook your own rom and recreate a bin flashable PDA file.
Please notice that there's no tool included to edit, add or delete modules and files from rom dump.
You must use one of the tools available here in forum to do this or do this by hand.
Donwload the zip file and extract everything.
READ CAREFULLY THE README FILE IN THE ZIP ARCHIVE
This file explains how the procedures work and what you need.
PLEASE TEST THIS KITCHEN AND REPORT YOUR RESULTS
I thank chaimd for his bintonb0 tool, tadzio for his tools and Juggler for conv3 sourcecode.
I also thank Topogigi for his original procedure.
I modified conv3 tool to make it work with i780 rom files and made split and merge tools.
If you want to try this kitchen, I thank you!
[FONT="]If any guru in the forum wants to make a gui for this kitchen or insert tools for module, file and registry editing (like the ones you can find in other kitchens), it would be appreciated.[/FONT]
Issue 1: it seems there's a problem with Part02.raw conversion. It screws up connection settings. Problem is being investigated.
[Partial solution]: it seems that this problem is due to both size and language: I used an English rom to convert an Italian Part02.raw.
Using an Italian rom seems to solve the problem. But you must check the new rom size: if it's too big it gets cut down and it doesn't work.
Amazing Thank you very much!
inertiax3 said:
Amazing Thank you very much!
Click to expand...
Click to collapse
wheres the download link ?
Everything's online now!
Have a good time and let me know!
Thank you very much
And is it possible to use it for create a .bin flashable phone rom ?
sorry for a noobie question.
with this kitchen, can i cook a wm6.1 by replace all the wm6 files with wm6.1 files?
Thanks famucs i have tried your procedure.
It's all ok but i nedd to split i780_XIHA7_Rev12.img in tree part loader, pda and phone.
Can You help me?
sorry for my terrible english.
tatoone said:
Thanks famucs i have tried your procedure.
It's all ok but i nedd to split i780_XIHA7_Rev12.img in tree part loader, pda and phone.
Can You help me?
sorry for my terrible english.
Click to expand...
Click to collapse
thats easy .. heres how to do it
fire up mirage on ur pc and chose the eboot+phone+pda option and select ur file ..
then dont connect the samsung to pc.. instead use file explorer on pc nd go to c and copy the three files to some other folder.. cancel the mirage on pc then
ruffruff said:
sorry for a noobie question.
with this kitchen, can i cook a wm6.1 by replace all the wm6 files with wm6.1 files?
Click to expand...
Click to collapse
i was thinking the same thing.. ? if you try let me know too !
zohaer21 said:
i was thinking the same thing.. ? if you try let me know too !
Click to expand...
Click to collapse
I love your footer about the 8502 being a mistake. I also own one. what a dissappointing and relatively useless machine it is, and I can't find a buyer...
I have tried with dump of HC1 italian but I have more problems.
The more little is the desappear of office folder but most important is the deseppear of remote connection e wifi connection.
tatoone said:
I have tried with dump of HC1 italian but I have more problems.
The more little is the desappear of office folder but most important is the deseppear of remote connection e wifi connection.
Click to expand...
Click to collapse
That's interesting:
can you tell me exactly what rom did you use as a base?
ruffruff said:
sorry for a noobie question.
with this kitchen, can i cook a wm6.1 by replace all the wm6 files with wm6.1 files?
Click to expand...
Click to collapse
Don't think you can.
In another thread, people were talking about a xip part needed to switch from wm6 to wm6.1
famusc said:
That's interesting:
can you tell me exactly what rom did you use as a base?
Click to expand...
Click to collapse
I have the the loader and the phone of i780DXHC4 english.
I have processed a dump of italian rom version i780XIHC1 with yor software.
Peraphs the dump of italian rom is broken??
tatoone said:
I have the the loader and the phone of i780DXHC4 english.
I have processed a dump of italian rom version i780XIHC1 with yor software.
Peraphs the dump of italian rom is broken??
Click to expand...
Click to collapse
No, I think there's a problem with payload update.
Thanks i will try it
where to get the part02.raw from ? i wanna work with dh4 rom ?
thanks
Convert Part02.raw to .bin
Hello famusc,
Thanks for your effort to create a kitchen for the i780! I wanted to create a backup of my Dutch i780-rom (PDA: i780XKHA3) and I managed to dump part00.raw, part01.raw and part02.raw.
Now I wanted to convert part02.raw to a flashable .bin file so I could reflash this Dutch rom if I want to go back to factory defaults, but the warnings make me a bit scary to test the .bin I created, so I wanted to ask some questions first:
-The .bin has to be as large as possible, I have the i780pda_WWE_test2.bin which is 78.512 kB and my Part02.raw is 79.104 kB. The .bin I get when the conversion is finished has a size of 78.512 kB. Does this mean some data of my original dump is lost? (I kinda understand your conversion tool replaces the part02.raw file of a flashable .bin rom with another part02.raw which in my case is the Dutch part., but is all the information still in it?)
-My second question is if it is a problem if I used an English .bin with a Dutch .raw?
If you could please anwer my questions I would be very happy, because I have seen some requests for Dutch i780 roms and it might come in handy for other languages, because in this rom Windows Live Messenger is included (and obviously working). So maybe someone can extract it.
If you are interested I could upload the .raw files i have dumped and maybe you or someone else can create a flashable Dutch rom from it (or extract WLM if it is needed).
Grtz,
Manchurian
Manchurian said:
Hello famusc,
Thanks for your effort to create a kitchen for the i780! I wanted to create a backup of my Dutch i780-rom (PDA: i780XKHA3) and I managed to dump part00.raw, part01.raw and part02.raw.
Now I wanted to convert part02.raw to a flashable .bin file so I could reflash this Dutch rom if I want to go back to factory defaults, but the warnings make me a bit scary to test the .bin I created, so I wanted to ask some questions first:
-The .bin has to be as large as possible, I have the i780pda_WWE_test2.bin which is 78.512 kB and my Part02.raw is 79.104 kB. The .bin I get when the conversion is finished has a size of 78.512 kB. Does this mean some data of my original dump is lost? (I kinda understand your conversion tool replaces the part02.raw file of a flashable .bin rom with another part02.raw which in my case is the Dutch part., but is all the information still in it?)
-My second question is if it is a problem if I used an English .bin with a Dutch .raw?
If you could please anwer my questions I would be very happy, because I have seen some requests for Dutch i780 roms and it might come in handy for other languages, because in this rom Windows Live Messenger is included (and obviously working). So maybe someone can extract it.
If you are interested I could upload the .raw files i have dumped and maybe you or someone else can create a flashable Dutch rom from it (or extract WLM if it is needed).
Grtz,
Manchurian
Click to expand...
Click to collapse
Thank you for using my kitchen.
First of all I ask you to use version 0.2 BETA: it contains some important corrections in conv3 tool.
Now:
1) Part02.raw is usually bigger than required. So we are interested into its shrinked size. I think that your 78512K bin file should be good.
In 0.2 kitchen it is explained how to check bin size is enough for new data.
2) It's not clear whether you'll have problem with a bin of a different language than raw file. As for my experience, I always got connection problem when I used a different language bin. You can try and then have a look at connection settings and at wifi Internet-Work settings. If you find no connection defined or you can't connect through wifi, than it doesn't work.
You should use a Dutch bin to be sure you'll have no problem.
Hope I helped you,
Bye
Hi, Thank You for your I780 Kitchen ,
this is first time i build a rom,
may i know that where can i found the file
part02.raw?
Thank You for reply =)
Hello, I'm new here, and I have been attempting to make two custom ROMs for the HP iPAQ 21x series, and I ran into a huge problem. I have two dump folders, and I can't figure out how to turn either of them into an NBH(or NBF) file. Any help would be highly appreciated.
Edit:Oh, and also, in case anyone was wondering, I'm trying to make them a Windows Mobile 6.1 ROM and a Windiows Mobile 6.5 ROM, and they are both(as far as I know) clean, except for the HP stuff.
nbh or nbf... ? for what ? it is inpossible to flash it back, you need bldiag.nb0 and hpimage.bin (foxconn format) but fortunatly pdocwrite works fine, so you need to: dump or download dump of imgfs (part02, os) unpack it via imgfstodump, cook to wm 6,1 or 6.5, then convert back to imgfs via imgfsfrom dump, and write via pdocwrite, xip can be also writed by this way, xip is part01, it works but i'm not a rom cooker so I cant cook it myself...
edit: it is also possible to edit marvell obm's and bootloader, but only via linux
edit2: here is my post about ipaq 214 and pdocwrite http://forum.brighthand.com/showpost.php?p=1762892&postcount=4
edit3: it will also works on any 21x and 11x and as I think on other hp devices manufactured by foxconn
I'm sorry elektrownik, but I don't really get what you're saying, I'm not very experienced with this ROM stuff, this is the first time I've ever tried to make one. But in response to what you're asking(I think), I was going to make them NBH files, make a backup ROM image of the device, and then use the HP RUU, which I have made to look for a file called 'RUU_signed.nbh'(what I will name them), to update the device via Activesync connection.
Update:OK, I've managed to get a little further, and now I have two BIN files, and two NB.PAYLOAD files, and I'm pretty close to turning them into NB Files.
But how do you want to sign it for hpruu it need hp cert and key, or did you cracked it. Anyway here is default rom. http://rapidshare.com/files/2236847...n_marked_internally_with_custom_extra_data.7z
Oh, well I didn't know it had to be signed, but in the ROM files which I was basing mine off of(which I thought you made) was an HP digital signature file(.cer) that said it went an HP 21x Image Update, I clicked on it, Windows said it installed the certificate, and then the file dissapeared. I'm not sure if that will help use the HP RUU or not, but I found it kind of odd. Also, if you'd like to take a look at it I can put it up for download somewhere(there was another one).
Fdo35 said:
Oh, well I didn't know it had to be signed, but in the ROM files which I was basing mine off of(which I thought you made) was an HP digital signature file(.cer) that said it went an HP 21x Image Update, I clicked on it, Windows said it installed the certificate, and then the file dissapeared. I'm not sure if that will help use the HP RUU or not, but I found it kind of odd. Also, if you'd like to take a look at it I can put it up for download somewhere(there was another one).
Click to expand...
Click to collapse
just do what I wrote - cook wm 6.1 or 6.5 to romdump convert it back to imgfs and it will be posible to write it to device by pdocwrite application
Fdo35 said:
Update:OK, I've managed to get a little further, and now I have two BIN files, and two NB.PAYLOAD files, and I'm pretty close to turning them into NB Files.
Click to expand...
Click to collapse
What parameters did you use for Tadzio's imgfs tools on NBSplit?
Fdo35 do you know how to flash ipaq 21x?
Maybe you can work together with some people already trying to make wm6.5 rom....
Kind regards,
W.
Steven855 said:
What parameters did you use for Tadzio's imgfs tools on NBSplit?
Click to expand...
Click to collapse
What's "parameters", I don't know what you mean. Also I don't remember using NBSplit, I started out with a IMG file which I then dumped.
Edit:Oh wait, I see what you mean. I didn't use NBSplit, I was following the attached directions to reconstruct ROM, except it wasn't for the device the file specified, and instead of 'imgfs.bin', I used a file called 'ipaq214.img', and instead of 'Windows.nb' I used a file called 'flash.nb'. And, I'm pretty sure that elektrownik made both files.
lol why you all dont read what i wrote, i have rom, which was reconstructed from dump, but it impossible to flash it from sd like on htc by flash.bin, ipaq 214 need bldiag.nb0 and hpimage.bin to be flashed from sd, but those files never was released so it is impossible to study format in which they coming, 214 can be also flashed from pc, but it need foxconn application and like before hpimage.bin, and there is official metchod - hpruu, but files which it use need to be signed first, we dont have cert and key to sign them, it wold be possible to patch hpruu to delate sign validation but i dont see anyone who working on this, as i wrote only one working metchod is pdocwrite application, i check it and it works, but i'm not room cooker so i cant cook wm 6.1 or 6.5 imgfs...
I think there are quite few topics about it.
It would be maybe better to have EVERYTHING relevant in one so everyone who posesses knowledge can help.
Now it looks that we (you) are inventing hot water... no offence - i appreciate all the hard work you put into this. But we (you) need better cooperation and clean topic.
I am grateful to everyone who share and try to make something. Respect to you all!
Kind regards,
WODP
The HP iPAQ 110 has a ROM update on HP's website, is it possible to get any of those files from that?
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=215348&prodSeriesId=3644061&prodNameId=3644062&swEnvOID=4014&swLang=13&mode=2&taskId=135&swItem=hh-59617-3