YEAH!!! MP3 RINGTONES for the XDA IIs users - MDA III, XDA III, PDA2k, 9090 General

http://www.pocketgear.com/software_detail.asp?id=17164
anyone tried this?? it claimed to work

There is no need to buy this program just put any MP3 files in your "rings" folder in the windows folder on your PPC Phone and then they will come up in the ring tone list when you pick ringtones. It's then free. We all love FREE.

seal said:
There is no need to buy this program just put any MP3 files in your "rings" folder in the windows folder on your PPC Phone and then they will come up in the ring tone list when you pick ringtones. It's then free. We all love FREE.
Click to expand...
Click to collapse
in case you dont know, MP3 format cannot be supported as incoming ringtones for the XDA II, XDA IIs

I have an XDAII and was able to use MP3 as ring tones without any issues, either with 1.72 or 2.20 ROM.

no, the IIs does NOT support MP3 in the phone ringer app. The device can play MP3s via media player etc, but they are not supported as ring tones.
WMA is supported as ring tones.
No major biggie for me as I don't wanna use the full bitrate MP3 as a ring anyway - just conver to a Mono 22Khz 48bps WMA instead and only convert the 30 secs - 1 min that the phone would actually ring for.

tde said:
I have an XDAII and was able to use MP3 as ring tones without any issues, either with 1.72 or 2.20 ROM.
Click to expand...
Click to collapse
can i know how you managed to do it??
thanks a million
wished my XDA IIs can play MP3 ringtones too

tde said:
I have an XDAII and was able to use MP3 as ring tones without any issues, either with 1.72 or 2.20 ROM.
Click to expand...
Click to collapse
How come? Please assist me ... thx

guys... just use a free prog (I use audacity) to convert to wma.
You generally don't want all of a stereo mp3 as a ring anyway.
I just take the bit of the mp3 I want as a clip in audacity, and convert it to mono mp3 with a low bitrate. I generally turn the db up as high as it will go (without clipping) as well as you want a ring loud. Audacity will also loop a clip and let you trim it to get it to loop just right.
Then just pop the wma in the rings folder and viola !

evilc said:
guys... just use a free prog (I use audacity) to convert to wma.
You generally don't want all of a stereo mp3 as a ring anyway.
I just take the bit of the mp3 I want as a clip in audacity, and convert it to mono mp3 with a low bitrate. I generally turn the db up as high as it will go (without clipping) as well as you want a ring loud. Audacity will also loop a clip and let you trim it to get it to loop just right.
Then just pop the wma in the rings folder and viola !
Click to expand...
Click to collapse
How do you get Audacity to convert to .wma??? it only does .wav, .ogg, and .mp3 - as far as I can see..... :?

Mamaich's new WMP10 rom (found in the Blue Angel upgrading forum) gives the XDAIII mp3 ringtone support.

On MS website (Windows Media downloads section) there is a free down load that will convert MP3 to WMA, will even do Bulk folders if you want

TheLastOne said:
Mamaich's new WMP10 rom (found in the Blue Angel upgrading forum) gives the XDAIII mp3 ringtone support.
Click to expand...
Click to collapse
Pls tell me how to set MP3 file as ringtone, I successfully upgraded that rom. Thanks a lot.

Yes you can upgrade your rom to 1.33.51 for mp3 ringtones and wmp 10.
i had upgrade two days ago, and worked it in my IIs

ardy45 said:
Yes you can upgrade your rom to 1.33.51 for mp3 ringtones and wmp 10.
i had upgrade two days ago, and worked it in my IIs
Click to expand...
Click to collapse
Yes, I did, and WMP10 run smoothly on my PPC, but how to set MP3 file as ringtone?

mp3 ringtones
copy your mp3 ringtones to directory windows/rings in your device.
and setting your notification phone call with them.
or you can install patch englishmp3ringtone.cab (find this file in ftp xda developer)

HKCR\wavefile\Shellex\ContextMenuHandlers\
copy the key "{E88B4A18-6F77-Abb6-8E0D-DCD4B1F8F1DA}"
under the key (create)
HKCR\mp3file\Shellex\ContextMenuHandlers\
Thank's to http://www.newsmobile.it
Italian do it better :lol:

Thanks, but I can set one MP3 ringtone only, and cannot select other MP3 files in \Windows\Rings from Sound & Notifications settings. In addition, my MTUX ringtoneX 2.0 does not work with MP3 ringtone. Any suggestion? Thanks in advance.

hung_ng said:
ardy45 said:
Yes you can upgrade your rom to 1.33.51 for mp3 ringtones and wmp 10.
i had upgrade two days ago, and worked it in my IIs
Click to expand...
Click to collapse
Yes, I did, and WMP10 run smoothly on my PPC, but how to set MP3 file as ringtone?
Click to expand...
Click to collapse
Hi, I'm from Malaysia. I've already upgraded my XDA IIs rom to version 1.33.51 also. But my device also cooked with IA Caller ID version 1.20.
I can assign any ringtone to any contact including mp3 format using the program (Caller ID 1.20). Try it. Thanks.

DJaYKaY said:
HKCR\wavefile\Shellex\ContextMenuHandlers\
copy the key "{E88B4A18-6F77-Abb6-8E0D-DCD4B1F8F1DA}"
under the key (create)
HKCR\mp3file\Shellex\ContextMenuHandlers\
Thank's to http://www.newsmobile.it
Italian do it better :lol:
Click to expand...
Click to collapse
care to explain more?

david beckham said:
DJaYKaY said:
HKCR\wavefile\Shellex\ContextMenuHandlers\
copy the key "{E88B4A18-6F77-Abb6-8E0D-DCD4B1F8F1DA}"
under the key (create)
HKCR\mp3file\Shellex\ContextMenuHandlers\
Thank's to http://www.newsmobile.it
Italian do it better :lol:
Click to expand...
Click to collapse
care to explain more?
Click to expand...
Click to collapse
David,
Use PHM registory or Resco registry for accessing the registry on your device.
HKCR\wavefile\Shellex\ContextMenuHandlers\ (Where HKCR is the HK Current User)
copy the key "{E88B4A18-6F77-Abb6-8E0D-DCD4B1F8F1DA}"
Then go to HKCR\mp3file\Shellex\ContextMenuHandlers\
and create a key by pasting the above.
Voila there is your mp3 ringtone. Check and let us knowl.
Hemant.
Then go to this folder

Related

MP3 as Ringtone

Should I be able to use MP3 as ringtones so far I have found a way only .wav's
CarlnAdele said:
Should I be able to use MP3 as ringtones so far I have found a way only .wav's
Click to expand...
Click to collapse
You should be able to use .wma as well.. :? I found a way to locate the .mp3 to be used in the ringtone section, but I didn't figure out yet the way how 2 play it.
As far as I konw, you have to convert MP3 to wma or wav to use it as a ringtone.
Can they be stored on the SD card by default or is there a third party app for this?
Richard
ricmoo2004 said:
Can they be stored on the SD card by default or is there a third party app for this?
Richard
Click to expand...
Click to collapse
Having solved this here is what to do:
Download an app to convert MP3 to wav or wma
Convert file to Wav or wma then copy to storage card
Then Start, Settings, System, Add Ring Tone
This will bring up a list of all the wav etc files on the MDA III just select the one, ones you want to add then they become available as ringtones
Hope this helps
Yes ringtones can be stored on xda iis and xda ii
Edit registry at
\HKCU\ControlPanel\SoundCategories\Ring\
Under Directory change it into \Storage Card\ or \Storage Card\ANY FOLDER NAME YOU WANT\ (example - \Storage Card\WMA\ )
O2 Techies Asia :roll:
As I understand it. If you don't do the registry hack above, the ringtone is copied into main memory any way, so it's pointless having it on the storage card.
Default ringtone location changed
Just don't run addringtone then it would not search for all ring types, simply goto start>settings>phone>select your ring tone (the hack actually forces the phone to not move the ringtone into the \windows\ring\ directory, hence no wastage of space)
o2 Asia Techies :roll:
This machine is amazing
So I just baught the XDA 2, I know, I'm a little behind. I have the manual in .pdf and I was wondering, can the XDA 2 read .pdf's? So far I have had some trouble getting it sync'd.
Any suggestions???
One more thing? Can anyone reccommend an amout of mem? When is too much, too much?
Try Acrobat Reader for PPC here -
http://www.adobe.com/products/acrobat/readerforppc.html
XDA Themes & Screensavers
I'm a new XDA II buyer and would like to know how I download themes and screensavers.
If anyone can tell me a good website where I can get this for free I would be most appreciative.

.WAV items do not play???

Ever since I got my XDA IIs, any .wav file i add to my pda, i cannot play it... When i click on the file, the little rectangular box comes up and I press play. Less than a second after het, it stops playing... this means I can't use any wav files as ringtones!
I can olny play them using a 3rd party app (Betaplayer)...
Has anyone else experiened this problem, or does anyone have a fix?
Cheers
Richard
Don't have this problem on my Qtek 9090 and can't imagine why it doesn't work for you. The Windows default ringtone is .wav !!! Does this work ?
Yes,
all the default ones work, but whatever other .wav files I put on don't work?!
Its really annoying 'cos all the default ones are really crap!
PLEASE SOMEBODY HELP!!!!
Cheers
Rich
Make sure the wav files are PCM-format.
Use Windows Sound Recorder (Programs, Accessories, Entertainment) to 'save as' this format. You can also alter bit-rates etc

anyway to use mp3 files as ring tones?

i have just changed to an XDA IIs from my k750i and so far i have found londs of things the XDA wont do that the K750i could to..
like play mp3 files as ring tones for instance. i transfered them all across and the XDA wont find them as ringtones.
anyway around this apart from converting the files!?
thanks in advance
They just need to be in the \Windows folder.
Edit: OK, just tried it. You could try converting to WMA format.
just copy your ring tones to windows/rings and you'll be able to see them in phone settings...
however, there is a registry hack to change rings path to Storage instead of RAM.. it works fine with me ( Magician )
Cheers :wink:
could u please post the registry hack here...would love to have my sd card songs all as ringtones ......also is there a reg hack to play .mp3 as a ringtone instead of converting it to .wma and then play as a ringtone...its quite annoying to convert them first and etc etc.....
MP3 Ringtone Bitrate to battery power ratio.
I'm guessing from owning an iRiver iHP-140 Personal Media Player that the MP3s Bitrate will have a bearing on the battery power usage. Going on other Forums tests 128 kbps mono/stereo 44khz will be the best bitrates for battery consumption. look forward to reg hack as well, upgrading rom to PDA2K 140.0 iMate ROM for my o2 UK xda2s, wonder if this makes a difference, will report if it dose.
if you have wm10 you get mp3 as ring tones
and to get wm10 you need a rom which include it
wm2005 does
2003SE chinese version does
Well i got this file and installed it onto my xda iis and it works. It adds a set as ringtone option in the menu that shows when u hold ur stylus on the mp3.
Soory newbie here with XDA
Could you tell me how can i install the cab file posted by you.
Thanks
Anybody have info on the reg hack to change the ringtone location from \windows\rings to your storage card??
medowance said:
Soory newbie here with XDA
Could you tell me how can i install the cab file posted by you.
Thanks
Click to expand...
Click to collapse
just copy it to ur pda usin active sync...tap on it to run or install....
fingery said:
Anybody have info on the reg hack to change the ringtone location from \windows\rings to your storage card??
Click to expand...
Click to collapse
i am also waitin for this hack so that i can use my sd card to good....
jedi-knight83 said:
i have just changed to an XDA IIs from my k750i and so far i have found londs of things the XDA wont do that the K750i could to..
like play mp3 files as ring tones for instance. i transfered them all across and the XDA wont find them as ringtones.
anyway around this apart from converting the files!?
thanks in advance
Click to expand...
Click to collapse
Place your *.mp3 file to \storage card\My Documents. You can choose that *.mp3 file as ringtone. The more free space on your storage card, the more mp3 ringtones. Cheers.
zyxer_raffy said:
Place your *.mp3 file to \storage card\My Documents. You can choose that *.mp3 file as ringtone. The more free space on your storage card, the more mp3 ringtones. Cheers.
Click to expand...
Click to collapse
But when you right click the mp3 and 'set as ringtone', it still gets copied to \windows\rings :?
Select it (*.mp3) the usual way, i.e., Start>Settings>Sounds & Notifications. There you will see the mp3 file you placed in \Storage Card\My Documents\. Also applicable for *.wmv files.
Correction: Applicable to *.wma files too.
Doesn't work on the XDA Exec
It has worked in an Universal with WM6

mp3 file as ringtone

I have tried this several times, even contacted orange, but am now getting conflicting information
The manual says mp3 files can be used as a ringtone
orange then advised me to move the files into the /rings folder
However, the device cannot recognise them
I've now been told by orange the device does not support mp3 files at all!
I then told them that I can play them in Windows Media Player and was told the device shouldn't be able...
Any ideas?
Try the attached file; works for me on my SX66.
How is this installed, and into which folder(s) on the Pocket PC?
just move into any folder...and...tap on it.. it'll automatically install...
just as simple as 1-2-3...
Tried that, no change...
I have a file called bigbrother.mp3 in windows/rings folder, but this is not being recognised
If I move any other type of file (.mid .wav) into this folder, then I can set those as ringtone
I can also setup any other ringtones from the start/settings/system/add ring tones
What next?
WAV ringtones...
Hi! I also had issues getting an MP3 to play as a ringtone... Not sure if it was due to the file size or the file type.
My work around was to use a tool to slice and dice the file to
1. Make the ringtone duration 20 seconds
2. Convert the file to WAV
3. Increase the gain so the ringtone is louder than original
There are tons of free applications to do this... I usually download todays' most popular from http://www.download.com ...
Enjoy!
Hi There,
Try renaming bigbrother.mp3 to a smaller name i.e big.mp3
I had an MP3 that wouldn't display in the list until I renamed it to a smaller name, then it became available and worked succintly.
let us know how you get on
Terry
No, no change
I was wondering of the file is too large, so uploaded a smaller one at 0.9MB, but this too was not recognised
The only conclusion I can come to is the orange SPV M2000 (QTEK 9090) does not support mp3 files as ring tones, only mid and wav
That still doesn't match the manual though (clearly states "use mp3 files as ring tones")
Update to latest rom (1.40.00 ?) That should fix it - I had the same problem - updated rom & voila
I've tried the latest orange ROM 1.40 and as really unstable and went back to ROM 1.31
I'll try again and see if there is any change
If you convert a MP3 file to Wav or WMA, then you would be able to set it as a ringtone (by right clicking it in your phone).
WMA is comparitively smaller than WAV, so I personally recommend WMA. I am converting files from ""Microsoft Digital Media Edition""Audio Converter" http://www.microsoft.com/windows/plus/dme/Music.asp#audio.
Cheers
Sidd
Just upgrade. This is an issue solved long ago. Newer ROMs are more stable, just get used to them
after you have your file in the phone, make sure you put it in mydocuments/my music folder on MAIN MEMORY, then go to file explorer and find it, hold down the stylus on the song mp3,wma,midi you want and there will be an option to set it as ringtone.
easiest way to do it..
anyway now that this has been answered, i keep a 2gb minisd card full of mp3s on my phone and i need an app that will let me cut a small (30 - 60 sec) clip .mp3 and be able to send it via bluetooth, it doesnt have the option to beam built-in but it would be easier. does anyone know of such a program? (for the phone not for a PC)
again sorry for the thread hijack, theres just no need to create a new one.
I've updated the ROM to the latest version from orange
The ringtones are still in the correct folder
Also tried right click and set to ringtone
Still no change, none of the mp3 files are recognised
It does look as if it is a misprint then in the orange handbook
Note this is an orange SPV M2000
Found out why I had previously downgraded to an old orange ROM
The one (currently) on the orange website is faulty when used with the camera... and causes an internal error
Works perfectly on my i-mate jam
Ya, it not work on M2000/O2.
I think ,this causes the system do no identify MP3 type(you can see the
files property).
Please change .mp3 type to WMa or WAV, then you can enjoy.
doesntwork on my xda 2... i got set it as a ring tone, click it , then nothing else happens :O/
This can be caused if a third party app takes control of the .mp3 extension. I installed a media player and it took .mp3 control away from WMP10. in order for your phone to use mp3 as ringtone it has to be associated with WMP. I had to use pocket tweak to re-associate mp3 to WMP. and this cleared my issue.
ooh, i think i have pocket tweak somewhere, makes me so irrate when other phones less complex can use mp3 ringtones with no fuss and bother. infact this phones annoying ime more and more , its so faddy!

[HACK]Use each music and each audio format with each size as Ringtone , Alert , Alarm

Hey guys
I finally found : Use .m4a , .wma , .wav and .mp3 formats as Alarm, Alert, Ringtone ((without size and length limitations))
without changing the audio name for example: Alert-01.wma or .....
first copy/paste your favorite(s) music(s) to \windows folder.
ok go [HKCU/ControlPanel/Sounds/
OEMNotifications <------------<< for Alerts
OEMAlarms <------------------<< for Alarms
OEMRingtones] <--------------<< for ringtones and Alarms
in these 3 folders add "new value" and then :
Value Name: name.mp3 or name.wav or name.wma << name=name of your audio file that pasted in WINDOWS folder.
Value Data: enter a name for your audio that you want be shown.
Value Type: String
then click "ok" to set it and go to Setting>ringtones+sounds and see
I tested with .aac , .amr , .m4a , .ac3 , .aiff , .flac , .mka , .mp2 and .ogg formats but just .m4a worked as SMS Alert.
I try it to add a small .mp4 video as ringtone but did not work.
I think if we can add more formats for Ringtones Category it will be possible to have video as ringtone.
IMPORTANT: If you use a long music as sms alert you would not be able to stop playing it, so you must shutdown your phone.
do not forget THANKS
Great!
A big-big thank you for this!
I don't know how did you find this out, but this is great!
I always had to rewrite the notification sounds in the registry after changing the ringtone, they somehow it got resetted to none after, but now this problem is gone.
I can change notification sounds and ringtones like it was factory implanted.
Thank a lot!
cheers and Happy New Year to you!
PS.: If you could find the reg key to stop converting down the resolution of pictures attached to an e-mail, you'll be a HERO.
wait, FLAC?
Obviously, the phone can't magically transcode every format. The advantage of this approach (over the official way to install ringtones) is that you can use any format that the phone supports, instead of just a subset of them.
So no, you probably can't use FLAC. I honestly don't know why you'd want to, given the speaker quality of the phone, but you can use any file that the phone could play through its media player, for example (includes AAC/M4A, for example, which I don't think is normally allowed for ringtones).
Snake. said:
wait, FLAC?
Click to expand...
Click to collapse
FLAC
Free Lossless Audio Codec.The highest quality in music/sound.
I think using mp3 as a ringtone is more than enough.
Hey guys
Thanks.
I'm not expert. I just tried all formats to see is it possible or not to complete my theory.
I have an audio converter and I tried this method for all formats that was known as audio ,but with these 4 formats and even with the most popular format .mp3 we got it.
It was one of main favorites that all of us needed and now it is possible.
I am so happy.
I wish everyone enjoy.
Sorry for my bad english.
Snake. said:
wait, FLAC?
Click to expand...
Click to collapse
yes .flac was an audio format that I saw yesterday for first time in an audio converter.
Ttblondey said:
FLAC
Free Lossless Audio Codec.The highest quality in music/sound.
I think using mp3 as a ringtone is more than enough.
Click to expand...
Click to collapse
yes really, mp3 is enough.
arses said:
yes .flac was an audio format that I saw yesterday for first time in an audio converter.
Click to expand...
Click to collapse
wait till you hear the sound quality.I prefer FLAC or atleast Lossless but it consumes alot of mb for each song.
Im gonna try adding some other stuff using this method ,just adding files to the windows folder and proting to the corresponding path in the registry ,should be interesting!
i am new to registry editor i dont know how to copy paste songs to Windows folder
can someone explain from which folder i can find the songs...
i am noob here please help me.
thanks
Hi
I tried to add a folder containing alerts using WPDM to windows folder but did not work.
neptunex3 said:
i am new to registry editor i dont know how to copy paste songs to Windows folder
can someone explain from which folder i can find the songs...
i am noob here please help me.
thanks
Click to expand...
Click to collapse
Hi
You can copy and paste your audio files using Windows Phone Device Manager or File Explorer installed on your device.
For these actions your device must be full unlocked.
Important and Useful
Hi
l deleted this post because it was a stupid mistake.
I want say excuse me for this mistake.
All audio files must be in windows folder.
Sorry and sorry and sorry.
arses said:
Hi
If you want add SMS Alerts to your device easily and without replacing them to WINDOWS folder :
Just sync them via zune as ringtone then go:
[HKCU/ControlPanel/Sounds/CustomRingtones]
they must be there. ( I suggest you for simplify your action and name your Alerts to: sms1, sms2,....)
In the path you must see your audio files with their name. OK
now remember their VALUE NAME (example : 8d.mp3) and go to
[HKCU/ControlPanel/Sounds/OEMNotifications]
In the new value you want to add, in VALUE NAME type exact value name shown in CustomRingtones and press ok. done
Note: every audio files that sync as RINGTONE via Zune are not required to move to Windows folder.
again sorry for my bad english .
Click to expand...
Click to collapse
Works with Alarm ?? .. or i must copy my mp3 file in Windows folder if i want change my alarm ?
Hi
Yes it works but you know well that when you want to add audio files as ringtone via zune it must be smaller than 1MB.
Therefore if you want to use a fav music az alarm you can sync it as music and move it to Windows folder by FileExplorer.
If somebody could change the Zune limitations for ringtones via registry on PC all of our problem would be solved.
Still not working for me. Anyone else having issues with the alert tones not showing up?
kweis87 said:
Still not working for me. Anyone else having issues with the alert tones not showing up?
Click to expand...
Click to collapse
Hi
Please send some shots of your work exactly like the photos I uploaded in the first post.
I solve your problem.
Hi
If you have sms alerts please upload here.
I will make a pack and I'll put them in first post.
Thanks
dendenmushi
here is a link from box.net with two sms alert based on denden mushi by One Piece anime
i love this as sms tone, so please add one of these to the pack
thanks in advance
ps
i have edited the registry but still cannot view the new sms tones on the list (and on custom ringtones values i cannot see any m4a, only mp3)

Categories

Resources