hi
if i instal bt gps tom tom my i-mate pda2k can`t connect to nokia car kit, but without tom tom navigator car kit conection is fine
rom 1.22.00 wwe
radio 1.12.00
bt 1.0.0 build 3500
Try deselecting 'Recieve all incoming beams' under 'Settings;Connections;Beam'.
tom tom
i trided but didn't worked
i installed different software gpsinf and it worked fine
BT gps and nokia hands free
What vs of TT are you running if vs3 roll back the GPS driver to vs 2.06, alternativly some people have had luck using TT vs3,07 I tried various vs3 settings and never got it to work the headset will pair and connect but when TT vs3 is loaded the headset will pair but fails to connect - I use TT vs5 which works but not with BT GPS and Headset tried it and it worked until you treminated call and at that point you lost GPS - so I went wired for GPS and all is fine. Mike
tom tom v3
my tom tom v3
i would upgrade to v3.07 after my holidy
Give it a try but the only way I got the XDAIIs to do what I needed was to ditch the BT GPS and go with wired, combined with BT headset - had no problem sinse then
Related
Hi,
I have problems connecting to my bt headset since I have installed TomTom3. I am running the build3500 bluetooth stack from the 1.06.02 FRA radio. It was working fine without even losing connection with the mda, but after I installed tomtom, it can pair, but cannot connect. The weird thing is that I can sync using bluetooth. I suspect tomtom is keeping busy some of the bt com ports? i noticed that during installation, it required to close bluetooth (cause it said the file BtcoreIf.dll was in use) and as soon as I did that, it finished installation, but since then the headset stopped working. Anyone has similar problems??
Thanks in advance for any input.
Update
Managed to sort it out by upgrading my BT stack to 1.0.0.3900. Still cannot find any similar complaints in any forums. Can it just happen to my MDA III? Who knows....at least it works now, even if my engineering background is not happy with it :shock:
Upgrading the bluetooth stack
Hi,
I have exactly the same problem as you had, although I'm on the UK network Vodafone and have an XDA2s.
My current radio version is 1.06.02 but I can't fine what version my bluetooth stack is. How do I upgrade to 1.0.0.3900?
Thanks in advance for any assistance you can provide.
Hi,
I am using Qtek9090 with TomTom 3.07 and Jabra BT800 headset and have not the problems you people talk about here. I have to mention that I immediately updated my BT version from 2400 to 3900 the same day I purchased the whole stuff. I was - when I was in the shop - told that TomTom 3.07 can sometimes cause problems due to BT version of Qtek (1.0.0.2400) and I better upgrade it to 3500 and/or 3900. I was also told that there were known problems with earlier versions of TomTom wireless (like in your case TomTom 3.03) and that I (at least) had to use TT 3.07 and/or better upgrade the BT driver of my Qtek9090. In order to find your current BT version:
- Click on Bluetooth icon
- Select Bluetooth Settings
- Go to [About] tab
- And there you see your own Build
- You can also select [Advanced] button in [About] for more details
Anyway, once being at home and taking my device out of package I did a BT upgrade to 1.0.0.3900 right away and so far I have no issue with BT stack. Even Jabra BT800 which a lot people complain about works fine with my Qtek9090 (OK, I admit the CallerID at Jabra still not working but I already expected that).
I downloaded the 3900 version of Bluetooth driver (plus another Audio driver) at the following URL in The Netherlands: http://www.pdanieuws.nl/modules/mydownloads/singlefile.php?lid=37
kind regards,
- Avareh ([email protected])
tomtom gps
The problem is that tomtom is messing around a bit with bluetooth for bt gps receivers.
So after installing tomtom allways reinstall the latest bt drivers.
AFAIK you should always use TTN 3.07 (GPS and Navigator) on SE and Phone Edition devices (Blue Angels is both WM2003SE and Phone Edition)
Big Fat TY
I was getting stupid before reading this 3d.
Even went back to the shop with the motorola headset and had them show me it was working....
Tom Tom was the reason.
Avareh said:
I downloaded the 3900 version of Bluetooth driver (plus another Audio driver) at the following URL in The Netherlands: http://www.pdanieuws.nl/modules/mydownloads/singlefile.php?lid=37
kind regards,
- Avareh ([email protected])
Click to expand...
Click to collapse
This link is not working at the moment, is there another link for this, i am running an xdaIIs and installed navigator3 and could bond but not connect to my bt headset.
will try the stack upgrade also a link fopr nav3 3.07 would be handy too...
cheers.
all sorted now, have got the files and fixed the issue.
I have just bought a Generic BlueTooth GPS for use with TomTom 5. I successfully paired the GPS with the XDA IIs, then the problem came of getting tomtom to find it. It will not see it as a Bluetooth GPS so I have to select "Other Cable NMEA GPS", set the baud rate to 38400 and set it to COM 6.
This will work for approx 40mins before TomTom5 crashes. It then takes a soft reboot to get it working again.
Is anyone else having similar problems?
I might have to go back to TomTom3.
My device info:
ROM Version: 1.40.00 WWE (i-mate ROM)
Radio Version: 1.12.00
ExtROM Version: 1.40.176 WWE
Well after struggling with TomTom 5 for the last time, I'm going back to TomTom 3. I believe there is a patch out there to get the TomTom 5 maps to work with 3.
I use my pda2k with tomtom 5.1 and both the Tomtom 3 bluetooth gps and a BT-338 Globalsat GPS Bluetooth Receiver .
In order to get it to work, I have to switch on bluetooth and connect to the gps manually, and then start Tomtom. Occaisonally the gps wont connect or Tomtom just wont detect the gps. I then to a soft reset, try again and it works.
I have not had to do anything clever with the Tomtom settings, in fact I think I just use the Tomtom bluetooth setting for both receivers.
If someone phones me whilst using Tomtom, after the call, tomtom does not detect the gps and I have to quit and restart.
Well I'm back on TomTom 3 now, it's lovely and stable, the BT connect first time everytime and I can make/accept calls on my BT headset.
Perfect!
If only the boys at TomTom had put some effort in and tested 5 before releasing it.
Hello Porkspeare,
can you tell me which version of TomTom 3 you are using and what bluetooth stack? I have the problem that I cannot use my BT headset Bluetrek G2 after installing TomTom 3.01 , even though before the TomTom install it works fine. Would be interesting to know what combination works on your machine.
Thanks
ROM Version: 1.40.00 WWE (i-mate ROM)
BlueTooth Version: 1.0.0 Build 3900
TomTom Version: 3.03 (427)
BT Headset Ver: Blue Trek G2
Hope this helps.
Vavavoom, are you using the very latest bluetooth driver from tomtom for version 3..
tomtom 5 hangs
I have same problem...
The problem goes away if you turn off all POIs
some say copying poi.dat from tomtom3 maps will solve it..
also seen something about a vga registry hack, havent tried any - i have just turned off poi until some solution pops up...
Jan
Hi cruising-thru,
I don't know what you mean by "bluetooth driver for TomTom3" - can you get a seperate update for just the bluetooth driver? The only update I found was for the Navigator (3.07) and GPS (3.07). Unfortunately I can only install the GPS update. If I try to install a Navigator update higher than 3.01 TomTom tells me it cannot find a map even though it's installed and activated. My current combination is therefore Navigator 3.01 and GPS 3.07.
If there is a sperate BT update could you please tell me where to find it?
Thanx
Thanx porkspeare,
I have the same combination except I only managed to install TomTom up to version 3.01. Maybe if I somehow manage to update to 3.03 it solves my problem. Will keep trying
Cheers
I am interested in this http://www.parrot.biz/united_kingdom/products/index.php?id=ck3300 Does anybody have any experience using this device, how well does it work etc. ?
I plan on using it with O2 Mini S and possibly Tom Tom software what do you guys think?
I have a CK3300 and the similar CK3100 (no GPS) in my wife's car.
They work superbly with Sony Ericsson phones, less well with Motorolas and Nokias but a bit of a disaster with the XDA Mini-S. Doesn't auto connect, doesn't synch contacts properly, overwrites voice tags. There's a bunch of posts on the subject in the Parrot forum on their website. Rumours that there will be a software upgrade shortly which will address some issues.
I haven't got around to trying the GPS with TomTom on the XDA (as I can't get it to install!) but it worked fine with my previous PPC (an iPaq RX3715)
--
Dave
I have a CK3300 not had to meany problems on the GPS side but my xda 2s and my axd mini would not work with the handsfree bit.
My xda exec works fine on GPs and handsfree.
Very good bit of kit overall
Beside experience, I have a question to post here.
I have Parrot СК3300 for 2 years. As handsfree kit, it works perfectly with Sonyericsson K750i, 700i, Z800, P900. With Sonyericsson P900, it works perfectly as hands free kit and GPS module simultaneously.
However, after connecting my QTEK2020i (1.11.00 WWE, Radio 1.02.00, ExtROM 1.11.113 WWE dd 27of Jan 2005) I can use Parrot as GPS module only. Any attempts to use Parrot as kar kit leads only to loud clicks from speakers. So just for now, I use Parrot as hands-free for Sonyericsson K700i and as GPS module with QTEK simultaneously.
No way to fix it. I delete all Bluetooth devices, soft reset, ad only Parrot as hands-free, soft reset. No result.
Can you suggest me how to fix it.
Thanks in advance!
Hi,
I have a CK 3000 intsalled with Tom Tom and a third party BT GPS mouse. The Parrot works very well but it has to be paired as a Hands-free set and not as a headset. One small bug, though: I have to start TT first for the GPS to connect when getting back into the vehicle. After that I start the engine, which connects the CK3000 to my MDA II. If the CK is connected first, TT can't find the mouse.
I've been looking for a way to get the audio to be put through the the CK. I once found a piece of software that could do that on this site but inspite of hours of searching, I haven't been able to find it again. - HELP!
parrot car kit
I have a parrot CK3500 GPS car kit and it works well with TomTom Mobile 5 on my SPV E200 ,C500, C550 and has worked with TomTom Navigator 5 my M2000 as well. This is for Voice AND GPS simultaneously.
with earlier versions of TOMTOM i needed to rename the bluetooth connection from Parrot to TomTom Wireless GPS.
I have an XDA Mini S too which is on a data only tariff (so havent tried handsfree) but TomTom 5 works with it for GPS. They seem a little fiddly to set up, but once set up they are great.
I found i needed to use "AnyGPS Tweak" on all the smartphones to get it to connect initially
I had a CK3300 in another car and that worked exactly the same.
The only criticism is that the GPS voice instructions dont go through the speakers. However sometimes they do, and it seems to be if you start TomTom before you switch on the car ignition, the car kit thinks a call is in progress and relays the GPS through the speakers. It doesnt always work, but sometimes its a bit of a shock to get Jane bellowing through the speaker!!
The downside is that if you take a voice call over the car kit, it seems to re-set and the GPS voice then reverts back to the phone speaker.
I have emailed Parrot about this and have not had a reply as yet.
Re: parrot car kit
shadowman said:
I found i needed to use "AnyGPS Tweak" on all the smartphones to get it to connect initially
I had a CK3300 in another car and that worked exactly the same.
Click to expand...
Click to collapse
Thanks for your reply.
As far as I understand, I can't solve problem with incoming - outcoming telephone calls by some "secret' QTEK settings.
Therefore, I'll try to find "Any Bluetooth Tweak" program to fix it.
Can you suggest any "Tweak" software?
I recently installed the HTC WM6 ROM and was pleased with its speed etc. however the bluetoth has changed in some way and I was unable to use my Mototola handsfree car kit. I then tried the B&B 3.7 and had the same problem.
Is there a workaround i.e. have the wm6 rom with the old bluetooth ?
Thanks in advance for any help!
Some car-kits show as a headset, some as a hands free. The WM6 blutooth only seems to recognise Hands Free. My car kit does both, On Nokia it shows both, on WM6 only Hands Free.
Does anyone have a Headset Stack?
WM6 and car kit!
I have the same problem! If i activate the hansfree e deactivate it works! Is a motorola a like carkit! Can sameone help me? Tks
I have the cheapo aldi BT car cd radio. If I turn the radio on then the BT on my phone the radio mutes. But if I do it the other way round, ie BT on then turn radio on, it worls fine
hth
Hello,
I have just bought a Jabra BT530 bluetooth headset and a BlueNext BN-905GR bluetooth GPS receiver. I'm having trouble getting them to work simultaneously with my TyTN running WM6. If I first connect my Jabra then neither tomtom nor Pocket nav can receive data from the GPS - Pocket nav says "GPS: Can't open COM port". If I switch off the Jabra then tomtom picks up the GPS in about 6 seconds. The Jabra will then not connect until tomtom is switched off... then if tomtom is restarted GPS no longer works. I have tried the available COM0, COM2, COM5 and COM9 for the GPS serial ports (with receive incoming beams switched off). I did actually manage to get both devices working simultaneously for a short while by uninstalling them both, resetting the PDA, installing the Jabra then installing the GPS on COM9. However when I switched them both back off and on again I was back with the original conflict. I'm using:
ROM Version: 3.30.3.3
ROM Date: 05/15/07
Radio Version: 1.38.00.01
Protocol version: 32.71.7020.12H
Any suggestions would be greatly appreciated.
Cheers,
Tim