Related
I am getting a little worried here.
It is advertised everywhere that the xda IIs has voice dial, which to me reffers to me talking into a bt headset and it calls that contact.
If this is not possible, can fonix ispeak sort it?
The device comes with fonix voicedial software, but it does not work through the headset. I have my MDAIII mounted on the windscreen in the car and manage to use voicedial to make calls with over 90% accuracy and then talk through my jabra bt headset.
Which unit do you have PDA2K or IIs? I haven't seen any postings yet comparing the two devices, O2 may have addressed some BT issues before launching the IIs.
I won't have one (IIs, already have PDA2K) till next week.
getting the 2's next week. new officail date is the 15th nov. so should recieve it on the 16th
So what does it take to make this work? is it impossible. Can we not do something?
it take it that this product is using the mic hardware and not bluetooth mic?
http://shop.store.yahoo.com/cellpoint/padrblvoreha.html
Anyone come acrross this before: (scroll down to Kai’s Bluetooth Headset Patch 2004 )
http://www.pocketpcmag.com/_archives/sep04/bluetooth.asp
could something simular be done on the xda's
Or is this something where only ever going to get to use with bluetooth v2?
read this an help me please
http://forum.xda-developers.com/viewtopic.php?t=12824&highlight=
Its good to see progress being made but the main problem still is a hard ware based. The mic and speaker in phone hardware need to be bridged with the ppc... which gets me thinking.....as we can speak into ppc and listen to the caller then once we BT the call it was bridge/switch it.... dont understand why something so simple and a much required feature is missing :?
Hi,
I have installed the trial version of MS command and it seems to be doing the trick... I have a qtek 9090 and I did not see any installed software for voice dialing... Is it only on PDA2K?
Thanks.
Anonymous said:
Hi,
I have installed the trial version of MS command and it seems to be doing the trick... I have a qtek 9090 and I did not see any installed software for voice dialing... Is it only on PDA2K?
Thanks.
Click to expand...
Click to collapse
MS Command doesn't support bluetooth headsets either.
From the MS blurb: "Bluetooth Headset Support - Voice Command does not support using a Bluetooth headset to initiate a voice command but you can use a Bluetooth headset during the phone conversation."
So its the same as fonix. You have to speak the dialling command into the device, and it only transfers to the bluetooth headset when the device starts dialling out. If you can put up with that, fonix works pretty well.
JD
Well as much as I was looking forward to getting a PDA2K or SX-66, I feel that this is a MAJOR drawback that has me thinking twice. I read that your cannot initiate VOICE calls using a BlueTooth headset no matter what software you are running. Is this accurate?
If so, then why can the Audiovox SMT5600 do it by the way of voice tags?
Thanks,
Frank
Previous ms smartphones and pocket pc phones have not supported the bluetooth handsfree profile which would allow voice dialling. Since the new devices now support it its up to the software developers to implement it in their software. For example, using my SE HBH-200 on my imate PDA2K i can initiate voice dialling on the headset but on the imate there is nothing to interface with. If the Audiovox can do it there is no reason why a more powerful pocket pc cant do it as well
Looking for a way to hit the mic button on the wired headset that comes with the TyTn to dial a number with a voice tag. I am using the leaked official WM6 rom which has the cyberon voice dialer working. What I haven't been able to do is launch the voice dial using the button on the mike. Even AE button mapper cannot pick it up as a button to be configured.
To do my homework, I searched using 8525, headset button, config, etc. but a) I got hits for other phones (ba, etc) and b) got a lot of posts on how to set up bluetooth phones, which doesn't apply in this situation. I found this cab ba_wm5_voice_dialer.zip but it didn't install complaining about insufficient rights, which I had never seen on a pocket pc. Maybe because it's for WM5.
Any help or links to previous threads on this would be appreciated. Right now, I have to take the phone out of my pocket to dial, which kind of defeats the purpose. Many thanks in advance.
I have no idea whether this helps or not but I remember this as a big topic on the Wizard when it first came out and there was this post http://forum.xda-developers.com/sho...highlight=voice+dial+headset+mic+button+wired I'd be interested to know if you get anywhere
Well, I tried those - thanks for the link. I get no feedback after I run the program whatsoever, so I guess it doesn't work. It does run though, since if you run it twice, it gives you energy levels- that much works, but the rest doesn't seem to.
I'm surprised dialing with the wired headset isn't supported out of the box since it's a part of the package, but oh well. I hope someone else has heard of something about this for the tytn.
The touch pro2 can't carry out the voice speed dial function with my bluetooth headset.
tap the call handling button on the headset can not make anything happen. Neither by press and hold the button.
The only function still remain with the sony-ericsson HBH-DS970 is double tap the call handling button on the headset to re-dial the last number.
The voice speed dial function is very useful when your hands is busy, such as driving. What can I do now?
I have two bluetooth headset, one is sony-ericsson HBH-DS970 and the other is SIEMENS HHB-750.
The software I use is cyberon Voice Speed Dial V1.2.
The following is an answer from HTC:
"I do not know how you have got Cyberon installed as it is not instaled on the device by default.
I therefore cannot give you any support as the devices do not have any voice command software installed out of the box.
best regards,
HTC Europe Support"
I can't have anymore words on this.
Correct it doesn't work There are a number of threads about this around here.
I use Microsoft Voice command and have to (long) press the send key on the phone then it kicks in through the Bluetooth car kit. The general theory is this is a side effect of the change in Bluetooth stack made on this phone, I'm sure we'll see a fix, but probably not until we start seeing cooked ROMs.
Gordon
All you can do is to change the settings for the Send button to launch CVSD when you hold it, but for doing this with your headset's button, unfortunately you'll have to wait... for another ROM...
all the best
Reporting in from Canada here... after reading a couple of threads about issues with bluetooth voice dial, I got concerned and tried it this evening with my Jabra BT3030 and Telus TP2. Voice dial using the included MS Voice Command software works properly when I press the voice dial button on the BT3030. So... the problem isn't universal; we have at least some bluetooth devices out there that work properly with voice dialing on a TP2.
Hope that helps,
--VelJharig
VelJharig said:
we have at least some bluetooth devices out there that work properly with voice dialing on a TP2.
Hope that helps,
--VelJharig
Click to expand...
Click to collapse
Would you please list some detail information,such as type number, of the bluetooth devices which work perfectly on voice dial?
I seached on this forum and many other chinese forum, almost all of them report the voice dial can't be launch for the call handling button on the bluetooth device.
Thanks in advance.
net_walker said:
Would you please list some detail information,such as type number, of the bluetooth devices which work perfectly on voice dial?
I seached on this forum and many other chinese forum, almost all of them report the voice dial can't be launch for the call handling button on the bluetooth device.
Thanks in advance.
Click to expand...
Click to collapse
Hi net_walker,
I'm not sure if I correctly followed your question, but if you're asking for the model number of bluetooth devices that seem to work with the TP2, I gave that in my original post. It is the Jabra brand, model "BT3030" that works correctly for me on my Telus TP2. The basic web page for the model is here:
http://www.jabra.com/Sites/Jabra/na-us/Headsets/Pages/JabraBT3030.aspx?productfamilytab=Details
On that website, they list it as the model BT3030, with what I believe is an extended specific model number of "(100-93030000-60)".
Hope that is helpful,
--VelJharig
mmmh ! Very interesting !
At first time, i've thought for a BDR tweack to solve the problem.
Now it sounds like it is radio Rom dependant...
VelJharig said:
So... the problem isn't universal; we have at least some bluetooth devices out there that work properly with voice dialing on a TP2.
Hope that helps,
--VelJharig
Click to expand...
Click to collapse
That's great news! Hopefully this will give the chefs here something to work with.
Gordon
In the forum, i'v seen somebody who had posted the Telus TP2 Sys and OEM's. I'm dowloading it and trying to analyse the OEM concerned with Ms Voice Command. Hope it can help us to solve the prob.
Schmurtz1968 said:
In the forum, i'v seen somebody who had posted the Telus TP2 Sys and OEM's. I'm dowloading it and trying to analyse the OEM concerned with Ms Voice Command. Hope it can help us to solve the prob.
Click to expand...
Click to collapse
I'd be that person. If you need any other details regarding file info from the device, just let me know.
Thanks for your share.
Because at this moment we didn't have an HardSPL from our dear Olinex Team (hope they do there home work (lol)) to make a cooked rom, i'm looking for something like OEM to CAB to test the OEM into my TP2 and maybe solve the problem for all of us who can't use Bth button to make a voice call.
VelJharig said:
Hi net_walker,
I'm not sure if I correctly followed your question, but if you're asking for the model number of bluetooth devices that seem to work with the TP2, I gave that in my original post. It is the Jabra brand, model "BT3030" that works correctly for me on my Telus TP2. The basic web page for the model is here:
http://www.jabra.com/Sites/Jabra/na-us/Headsets/Pages/JabraBT3030.aspx?productfamilytab=Details
On that website, they list it as the model BT3030, with what I believe is an extended specific model number of "(100-93030000-60)".
Hope that is helpful,
--VelJharig
Click to expand...
Click to collapse
Hi, everybody,
Did someone know some other bluetooth headsets work with Touch Pro2 to carry out the Voice dial function,except this one "Jabra BT3030" ?
Yes, I have the Tmobile TP2 and the Bluetooth voice dial function works with the MSVC that came with the phone. There is a 5-7 seconds wait until the microphone activates. So after I hold down the call button on the ear piece for few seconds to activate voice command, I have to wait till I hear a second sound that tells me the phone is now listening. Other than this, it works just fine.
Its an old plantronic bluetooth ear piece, dont remember the model number, but its the one with silver stripes down the length of the device on the sides. Its in my car, I will check later and add that if anybody needs the number.
My Plantronics headset can call voicedial the same way it did on my Kaiser - a long press of the "call" button.
Genesis3 said:
My Plantronics headset can call voicedial the same way it did on my Kaiser - a long press of the "call" button.
Click to expand...
Click to collapse
Hmmm, very strange.
I have a Plantronics Discovery 925 myself and it's supose to be one in the winner team of Plantronics, but still nothing
And I have to say that it works just perfect with Touch Cruise, Diamond and HD.
Not with this one. You're sure you didn't done anything to your phone regarding this?
all the best
Nope - one of the first things I checked when I got the phone, it worked right out of the box before I started hacking on the registry and such.
DesperateScorpion151 said:
Yes, I have the Tmobile TP2 and the Bluetooth voice dial function works with the MSVC that came with the phone. There is a 5-7 seconds wait until the microphone activates.
Click to expand...
Click to collapse
I can confirm that issue on the T-Mobile Touch Pro 2. It is a VERY long time to wait for MSVC to start listening. I wish there was a way to put the standard Bluetooth stack on here so that Voice Command would work better.
I use a variety of Bluetooth headset devices; BlueAnt S1 car kit, BlueAnt Interphone (motorcycle helmet kit), Nextlink G5, Motorola 850 Stereo headphones... and all have the same slowness for activating MSVC.
I have a MOTOROKR™ T505 and if I hold the button down it'll do last number redial but I have to hold the dial key on the phone down to get Cyberon to listen.
Can't use MSVC as it won't understand me. Lot's of humans have this problem too so it's no surprise
Anyone get anywhere with this ?
Is it fixed in 6.5 or are there any ROMs with a fix cooked in ?
I have the same problem with my SE bluetooth
I have a Tilt2 (wm 6.5) stock with a Motorola H17 and voice command works fine. About 2-3 sec after headset button push and MSVC is listening.
Need a help to make T7373RUS works with bluetooth mono handsfree.
Actually it works with, but does not the whole functionality, one thing is missing - it's a voice dialing via pressing call button on BT handsfree. OK, I know T7373 (non USA) does not have any voice dialing, but this is a WM, well I set up VITO VoiceDialer and it works perfect. But there is a problem - my bluetooth handsfree don't launch it. I've tryed to use wired handsfree it works perfect. What is a point, why such perfect phone cannot does that any nokia or SE phone does like a piece of cake.
Please help, this is really sad thing need to be fixed, can some one to figure out how to solve this?
May be anyone know USA version of Tp2 uses the same bluetooth stack?
May be some parts of USA version software is possible to integrate into my TP2?
Does anybody use Bluetooth handsfree with HTC TouchPro2????
Hi there,
I've searched this great forum for this piece of information and haven't found it, so here goes:
I was about to buy a Desire HD and then I read several users reporting absence of voice dialing over a bluetooth headset. I have to be sure about this, because it would be a deal breaker for me. Apart from this the DHD seems to be a device that fits my needs perfectly.
Hope you guys can help me out.
Thanks for your help in advance
best regards
André
it does do voice dialing over bluetooth with android 2.2 and up, hope that's useful for you.
thanks for answering
I heard that Froyo solved the issue, but that there was still a problem with the Desire HD regarding this feature. could you just confirm that it works. do you have the dhd and tested it yourself? Hope you don't mind my asking, but I don't want to buy a USD 500 phone and find out that this very important feature for me doesnt work. So could you kindly tell me if your info is based on your personal experience with it?
Thanks in advance
Hi,
i am also very curious about this question. I was searching the internet and did not find information about how to get this feature to work. It is not so important for me, as for my father (he owns desire 2.2 fw), but i will also appriciate it. It`s mostly needed in car and it`s quite dangerous without it, i think you know what i am talking about. Thank you for your answers.
I tried voice dialing using Google's Android Voice Actions which worked. However, I did not use bluetooth headset.
I understand there is another app that does voice dialing too (became free from USD$10) which name I cannot recall now.
I believe these can do the job you require.
*Edit* The name of the other app is Vlingo. You can try it out.
just tried Google Voice Search with my BT headset (Plantronics 975) and long-pressing the button didn't get me anywhere...
let's see if Vlingo works
if anyone has a solution it would be very appreciated, since having to tap the phone while driving completely misses the point of using a bluetooth headset in the car.
best regards
André
I have a 10 day old desire hd, it does indeed come with a voice dialer (cyberon voice commander) - at least the telus version of the phone does.
I've not had issues with getting the voice dialing to work...
BUT, after much troubleshooting, I have found that whe the cyberon voice commander app is running, the phone's external speaker volume becomes much quieter - the result: it can be difficult to hear your phone ring in an environment that is not extremely quiet.
the fix: force close the voice commander.
I'm currently in search of a replacement voice dialer app to replace it with
Revolution HD 3.0 is based on Froyo 2.2.1 and I am not able to dial via BT.
There is no response to BT button!
Froyo 2.2 should solve this problem. Should.... In my case this is still issue.
ps. My BT is Plantronics 975
Vlingo does not work with BT Headset long-press button, but it's kind of a workaround. Very, VERY big mistake on behalf of HTC in not making handsfree BT headset voice dialing work, at least until now. I've been escalated in the HTC support, but up to now the only thing they told me is that i works with the plantronics 220. I asked them why it doesn't work with Plantronics 975, since it is their top-of-the-line headset and am waiting for an answer.
If this doesn't get fixed soon it'll be a dealbreaker for me.
Hope someone has a clue as to how to solve this.
best regards
André
See this thread
http://forum.xda-developers.com/showthread.php?t=780687
it has the voicedialer.apk which works along side with google voice actions (does not replace it) and allows you to voice dial with a long press of the bluetooth button.
I installed it this morining, works great. It is included in LeeDroid Rom.
Nerds2You said:
See this thread
http://forum.xda-developers.com/showthread.php?t=780687
it has the voicedialer.apk which works along side with google voice actions (does not replace it) and allows you to voice dial with a long press of the bluetooth button.
I installed it this morining, works great. It is included in LeeDroid Rom.
Click to expand...
Click to collapse
Thanks a lot. Will try it later this evening Does my DHD have to be rooted in order to use it?
Vlingo was working rather well will bt heaset long button press until the update to 3.0. now I have to interact with the screen, which defeats Voice Dialing with BT headset for me.
Does anyone have another solution which works well for BT Headset Voice Dialing?
Best regards
André
I'm having problems getting voice dialing to work with the bluetooth headset as well. I've tried both RCMix3D Runnymede 1.4 and Android Revolution 6.1.1. It was very difficult to get the headset connect and it won't reconnect automatically. Further, the voice dialing app was missing from one of the ROMs and when bluetooth voice dialer starts up on the other one, it freezes the phone and you have to pull the battery which you know is a nightmare on this phone. Note that bluetooth will work when the phone is used to do the dialing but I need to be able to initiate this from the headset so it is truly hands-free to satisfy safe driving laws.
Does anyone have bluetooth voice dialing working on their Desire HD where it is invoked from a tap on the bluetooth device? Please post which ROM you are using and any special tricks required to set it up.
Thank you.
As a followup, I installed LeeDroid to try that out. It is still difficult to connect to the headset and reconnect automatically. However, once it is connected, handsfree bluetooth dialing works!
Can anyone tell me what needs to be fixed to make the BT connection work properly?