Related
Any help Pls???
a regular install ??
have u tried installing the arabyising suite from imaginet, regularly... ?
u mentionned previously u would install a w2003se, is such a rom available ?
I'm downloading the Arabizer from Imaginet now and will install it as soon as the download completes, but I doubt it will work properly as it is made for windows mobile 2003 and not 2005.
Unfortunately ther is no such Rom "2003" for Jasjar.... if it were there, it would have been much much faster and reliable.
Regards,
Khaled.
arabizer from jasjar extended rom
u can get the arabizer cabs from the erom of jasjar, i have them i can send them via e mail , i think they r too large to post as attachements here. my email is : [email protected]
salam
dr. mohamed eldardiri
Dear Dr. Dardiri,
Thank you very much for your gr8 support.
I have those cab files which came with my Jasjar, but unfortunately whenever I try to install them with the new test rom they don't work properly and they disturb the whole thing, so I think that there is something which needs to be up-graded in these cab files to make them comply with the new test rom.
I'll try the old araizer from Imaginet web site, who knows?! it may work.
I will post the result here after trying to install it.
My email is [email protected]
Regards,
Khaled El-Feki
Dear Dr. Dardiri,
Thank you very much for your gr8 support.
I have those cab files which came with my Jasjar, but unfortunately whenever I try to install them with the new test rom they don't work properly and they disturb the whole thing, so I think that there is something which needs to be up-graded in these cab files to make them comply with the new test rom.
I'll try the old araizer from Imaginet web site, who knows?! it may work.
I will post the result here after trying to install it.
My email is [email protected]
Regards,
Khaled El-Feki
they worked properly with me
i installed only 3 cabs , successively : the one with 1- acert, 2- acert2 , then 3- Ado , in this order, with no interruption inbetween, then i reset , it worked properly, i didnt use other cabs , as i used third party dictionary and calenders and stuff ... so i only installed the cab of my local provider , so that i be able to use wi-fi, everything is ok now. i installed the old imaginet arabizer , but it didnt work at all , and i hard reset.
one question though , i need to know how to use the arabic hardware keyboard as there s no alt key.
salam
Actually I don't know how to use the hardware Arabic keys, but I will check in the mannual guide and post the way to do it here.
You can use the screen keyboard if you tap on the keyboard on the bottom of the screen and choose and then you tap the drop down list and choose لوحة المفاتيح" then you can use the Arabic screen keyboard.
Actually I don't know how to use the hardware Arabic keys, but I will check in the mannual guide and post the way to do it here.
You can use the screen keyboard if you tap on the keyboard on the bottom of the screen and choose and then you tap the drop down list and choose لوحة المفاتيح" then you can use the Arabic screen keyboard.
Mohammad,
One of our room mates suggested me a solution, I tried it and it worked better than the default Arabizer which comes with the original old rom .
If you're interested to view the solution you can access it from this link:
http://forum.xda-developers.com/viewtopic.php?t=43213
Thanks again for your valuble support.
Regards,
Khaled.
arabic hardware keyboard
hello khalled
i was wandering if the new arabizer suite u installed supported the hardware arabic keyboard, coz i failed to use it using the default cabs. i knew that the shortcut keys are (shift+Sym) but it didnt work ...
salam
Hello Dr. Dardiri,
I installed the Arabizer from Imaginet web site, and I can tell you that it's much better than the one came with the I-mate rom.
But unfortunately I tried the hardware Arabic Keyboard but didn't work with me.
I will report this to the i-mate website support and see the result.
Salam,
Khaled.
Base on Dopod Test ROM WM6
CE OS 5.2.1236 (Build 17741.0.2.1)
Modified :
1) Remove Clearvue PDF and IA Zip
2) ClearType Enable By Default
3) Build in Traditional Chinese and Simified Chinese Viewing Function
3) Microsoft Yahei as Default Fonts (best outlooking But 10M )
4) Those Animation GIF, Build in Ringtine and those theme had been removed for save spaces !
Total Spaces 47.75M
Download @ http://www.megaupload.com/?d=KDY200Z4
Pls feel free to propsal any suggestion or improvement !!
This is my first time ... hope u like it !!
*for support a teenager to continue this project or if U really like this ROM,
Please kindly donate through paypal to [email protected]
up'ing nb format ...
Glad to see the Chinese supported ROM available here. Possible to upload some screenshots?
Thx.
Link Busy
Like to know the Chinese ROM has cooked
But the link always busy. Would there another path can download ?
Thanks but the link seems to be busy.
Also, does it have built-in Traditional Chinese Input?
Thanks
nice. thx a lot. Got bulit-in chinese input?
leofungwai said:
Base on Dopod Test ROM WM6
CE OS 5.2.1236 (Build 17741.0.2.1)
Modified :
1) Remove Clearvue PDF and IA Zip
2) ClearType Enable By Default
3) Build in Traditional Chinese and Simified Chinese Viewing Function
3) Microsoft Yahei as Default Fonts (best outlooking But 10M )
4) Those Animation GIF, Build in Ringtine and those theme had been removed for save spaces !
Total Spaces 47.75M
Download @ http://www.megaupload.com/?d=KDY200Z4
Pls feel free to propsal any suggestion or improvement !!
This is my first time ... hope u like it !!
*for support a teenager to continue this project or if U really like this ROM,
Please kindly donate through paypal to [email protected]
Click to expand...
Click to collapse
does it also have english?
only chinese?
May I have other download link?
calvin83 said:
nice. thx a lot. Got bulit-in chinese input?
Click to expand...
Click to collapse
I can cook it with CE-Star and Chinese input if anyone wants it.
Is it possible make it become chinese?
May be let me explain better ..
Personally , I prefer english interface,
but as a HK people,
I need to have a function to view chinese ..
and I HATE those fonts that using by CE-Star and Monster chinese
(the outlook of fonts is ugly ...)
therfore I use the fonts from windows vista which call Microsoft YaHei that can support cht and chs ....and best outlooking and never mess up at any size
that's why my rom is in english interface but HAD the function to view chinese ...
and for ppl who seeking for a clean rom, this may also be a good choice is be coz .. I had removed
1) clearvue PDF
2) those animated gif
3) all ring except those ring-standard.wma .....
4) those waterfall.jpg , flower.jpg ..........
I also a HK people, I agree with your point! but is it possible make it with the build in input for EN interface? and is it inculde the Windows Update?
Thanks!
I am using LVSW, rather than flashing again... is it possible to make it read chinese (no need input) like your ROM?
Mind to guide how?
Thanks leofungwai
Thanks leofungwai, as a Chinese user myself, I share the same delimar as you, and I am glad that you are sharing what you did with us. Now, about the Chinese input, would it be possible to have Cantonese pin-yin as one of the inputs?
Yes please Traditional Chinese with hand writing input if possible.
jiyuu0 said:
I am using LVSW, rather than flashing again... is it possible to make it read chinese (no need input) like your ROM?
Mind to guide how?
Click to expand...
Click to collapse
U may refer to this thread:
http://forum.xda-developers.com/showthread.php?t=302878
You will be able to view CHT (or even CHS, I am not sure) using the patch. If you need Chinese inputs, you have to use those software like Monster or CE Star.
dsldsl999 said:
Yes please Traditional Chinese with hand writing input if possible.
Click to expand...
Click to collapse
yeah, i dont mind english interface but I REALLY need chinese hand writing input, thx a lot
Any other Link? I still cann't download it!
Anybody up to making a windows live cab from wm 6.1..
Windows Live Messenger Cab 10.6.0034.0800
Can´t install it
I got the cab but shows unsuccessful install...
do you have it working?
we actually would need the cab to check. this thread asks if anyone has made a cab for the new live? maybe you would be so kind as to provide it
For sure. Where is the cab?
I´m sorry for my bad English
Seems like I missunderstood the original post, I tought that the cab in Matt´s kitchen was the good one. Sorry for the confussion
I tried the one in Matts Kitchen and it worked fine for me. The problem is that it is Build 0600 and not 0700
What is the newest version?
I have installed 10.6.0030.2100 on wm 6.1 and its working correct..
TripleQ said:
What is the newest version?
I have installed 10.6.0030.2100 on wm 6.1 and its working correct..
Click to expand...
Click to collapse
Like to know this also..
My version: Windows Live (10.6.0033.0600)
The newest version of windows Live messenger is 10.6.33.0700 only found in Schap's WM6.1 Pro 4.40 Beta ROM. The Feature that appeals to me is that it has a dropdown box that gives you a choice of , Hotmail, MSN, and Live, . TNT says this will be in his new Wizard Rom Windows Live Messenger 10.6.0034.800, must be the newest, also Khans 2.3 Wizard version has 10.6.0034.800 with the drop down box.
Is it possible to make a cab file of the newest?
m0nkm0nk said:
Is it possible to make a cab file of the newest?
Click to expand...
Click to collapse
I'd like to learn to make a cab file..... I did find the IE 6.1, but still haven't found the SMS 6.1 ...... If anyone has a link to someplace that can help me learn to create a cab file that would be helpful.
Chris
noellenchris said:
I'd like to learn to make a cab file..... I did find the IE 6.1, but still haven't found the SMS 6.1 ...... If anyone has a link to someplace that can help me learn to create a cab file that would be helpful.
Chris
Click to expand...
Click to collapse
hello!
to make a cab is not a big deal!if you have wincecab manager it's preatty easy but you must search some tricks over the net!i would glady help you but i'm not so good in english language so i better stay away!if you need wincecab manager you can find it here
IM a naughty XDA member that posted warez!!!
NO WAREZ ON XDA
Mate, whilst applauding your kindness in helping out your fellows, I think you should edit and delete your post in case you get a bit of a hullaballoo started.
Mustn't post links warez like that on here, mods are quite adamant about it usually.
pashamangl said:
hello!
to make a cab is not a big deal!if you have wincecab manager it's preatty easy but you must search some tricks over the net!i would glady help you but i'm not so good in english language so i better stay away!if you need wincecab manager CeCabManager
Click to expand...
Click to collapse
Thanks for the response! I will look for WinCECab and give it a go. You can edit your post and remove the download links to the Warez... I wouldn't want to anger the Modz...
I can't wait to start dabbling with these cabs.....lol .... I'm sure I'll be Hard reseting a few times after I apply some of my new cabs....lol
Chris
what's new in new build ?
i don't have a time for creating a cab, but maybe the package will be useful for some of you to create a cab
attached, enjoy.
Well thanks TNT! It's a good start, someone will probably beat me to it though. I'm at work and won't be able to get to this till tonight or 2morrow.
Chris
Xda 2?
Does this one work on the xda 2? If not is there any msn i can install for it? Please help.
Thanks a million TNT
you are welcome
i want to tell that this build has many fixes with new features were not there in previous versions.
First of all i wanna thank all of the amazing members here in XDA for giving me help and amazing ROMS.
here is a file to enable arabic in all roms based on wm6 - wm6.1 and wm6.5
http://rapidshare.com/files/271636867/win_6.5_Arabic_SUPPORT_1_.Cab.html
and soon my rom wm6.5 will be released. so i hope u wait for me
regards
and excuse my English
change file location to 4shared,com plz
beastfellow said:
change file location to 4shared,com plz
Click to expand...
Click to collapse
I, have AT&T Tilt with W6.5, looking for Arabizer as you mentioned link is not valid ...Could please email me link or SW...Thanks
Link broken
i hope to fix it
can you give another link ??!!
OK 3ks very much~~
ROMANCEMAN84 said:
First of all i wanna thank all of the amazing members here in XDA for giving me help and amazing ROMS.
here is a file to enable arabic in all roms based on wm6 - wm6.1 and wm6.5
http://rapidshare.com/files/271636867/win_6.5_Arabic_SUPPORT_1_.Cab.html
and soon my rom wm6.5 will be released. so i hope u wait for me
regards
and excuse my English
Click to expand...
Click to collapse
I am trying to dowload your file thats enable the Arabic but it seems that the link is dead, please send it to me???? I need it
Thank you so much
Download Error
I need the file too.. can not download reup please
thanks and regards
i want a file too but i can't download
Please upload this file again
Fix the link plz!
i am not arabic but i did search the net for this cab file and i found a link to it for you guys, http://depositfiles.com/files/a2ahwnjj9 this is a direct link to the file have fun.
Thanks man
it's not right posting something then letting everyone hanging there and asking for the person to re-up it and they don't.
Thaaaaaaaaaaanks
its worked fine with me
many thanks bro..
no problem i am glad i could help.
thx man was really good
thanx but we need to reupload the file so we can use it.
please do your best
best regards
much respect.thanx a million thanx
u rock.much respect.thanx a million thanx 4 the share.lol.aaaaaaaaaaaaaaaaaaaiiit
---------------------------------------------------------------------------------------------------------
Learn 2 live & live 2 learn.learn 2 listen & listen 2 learn.Live 2 love & love 2 live.
We live 2 die & we die living.
life is what u make of it
File Arabic cab for WM6 or All windows mobile
File Arabic cab for WM6 or All windows mobile you can download it in url bellow : ul.to/y1jyz1
you can read and write arabic now
or you can download the smallest cab for arabic here url : ul.to/pzybm7
hi folks, i've found out recently that Swype v3.9.10.10.5032
(the HD2 version) has been cabbed up for use on any(w)vga device.
i've been having a hell of a job trying to convert the cab to an EXT but it keeps failing
i'd be very grateful if someone would be willing to post a working ext for this new version?
many thanks in advance for any help
Chris
chrisd1a1 said:
hi folks, i've found out recently that Swype v3.9.10.10.5032
(the HD2 version) has been cabbed up for use on any(w)vga device.
i've been having a hell of a job trying to convert the cab to an EXT but it keeps failing
i'd be very grateful if someone would be willing to post a working ext for this new version?
many thanks in advance for any help
Chris
Click to expand...
Click to collapse
hi chris
i can make it work for you if yo uhave the cab for me
one other thing though can you help me out whit something?
i am loking for al vga ext packages
i have found a thread whit manilla packs ported to vga but only manill packs arent enough
can you help me on all ext packages that will work whit sense 2012
best regards
chris
miniterror said:
hi chris
i can make it work for you if yo uhave the cab for me
one other thing though can you help me out whit something?
i am loking for al vga ext packages
i have found a thread whit manilla packs ported to vga but only manill packs arent enough
can you help me on all ext packages that will work whit sense 2012
best regards
chris
Click to expand...
Click to collapse
the swype cab is available below (us english only)
http://forum.ppcgeeks.com/showthread.php?t=101376
i'm assuming you mean just the base sense packages you need?
i'm happy to upload to my 4shared and post a link for you but they are also available in the post below
http://forum.xda-developers.com/showpost.php?p=5635954&postcount=2
you need the vga, wvga and the required packages.
instructions on how to cook in are in the post below
http://forum.xda-developers.com/showpost.php?p=5636160&postcount=6
hope this helps
hi chris
i will downlaod it and make it tomorow for you if you are alright whit it as it is 23:15 here and the misses wants me gone from the computer
as for the packages i mean every package
not only manilla packs but the entire ext packages
also all cm packages all htc packages
i need everything
i downloaded a kitchen from deepshinning and i know how to make roms as i make my own for my blackstone
although it is 23017 its not a problem ill update it to 21895 myself(this isnt the problem
the problem is i cant find any up to date ext packages except the manilla packs:S
and as a cook you know there are way more ext packages besides the manilla packs
so can you provide me whit all ext packages to make a full sense 2012 vga rom
best regards
chris
couldnt help myself
see attachment this should work
dont forget you need to add lines to youre initflash.dat to make swype work
miniterror said:
couldnt help myself
see attachment this should work
dont forget you need to add lines to youre initflash.dat to make swype work
Click to expand...
Click to collapse
many thanks, specifically what do i need to add. i'll upload my packages to 4shared and post the link tomorow
cheers again
Chris
ok the sense packages are in a zip file below
http://www.4shared.com/file/246352120/ca008eb6/upload_files.html
unzip and add all of them to EXT>Diamond>common
the ereader and footprints are not needed as they are not ported or working fully yet.
enable them all and you should be up and running.
any other packages are optional and down to the individual
i would suggest using l3v5y's kitchens. very stable and easy to use.
i'm going to be upgrading my phone in a few weeks so will think about uploading and posting my kitchen at that stage. look out for it
regards
Chris
chrisd1a1 said:
ok the sense packages are in a zip file below
http://www.4shared.com/file/246352120/ca008eb6/upload_files.html
unzip and add all of them to EXT>Diamond>common
the ereader and footprints are not needed as they are not ported or working fully yet.
enable them all and you should be up and running.
any other packages are optional and down to the individual
i would suggest using l3v5y's kitchens. very stable and easy to use.
i'm going to be upgrading my phone in a few weeks so will think about uploading and posting my kitchen at that stage. look out for it
regards
Chris
Click to expand...
Click to collapse
hey chris
thank you verry much for uploading it
this is gonna save me alot of time
as for what t add to initflash.dat ill have to come back to teel you that as i have read that swype must be added to initflash but im not sure what to add
as i dont use swype
luckily there is a kitchen uploaded in the blackstone kitchen whit swype in it
so ill check it out there if its in
otherwise i know the person who wrote it and we swich pm so i could ask him what to add
so i can tell you what to add but give me a little time
best regards
chris
miniterror said:
hey chris
thank you verry much for uploading it
this is gonna save me alot of time
as for what t add to initflash.dat ill have to come back to teel you that as i have read that swype must be added to initflash but im not sure what to add
as i dont use swype
luckily there is a kitchen uploaded in the blackstone kitchen whit swype in it
so ill check it out there if its in
otherwise i know the person who wrote it and we swich pm so i could ask him what to add
so i can tell you what to add but give me a little time
best regards
chris
Click to expand...
Click to collapse
many thanks
and here it is
i dont know f it works right for you as vga as some thing say wvga
you can always try and otherwise i have looked in the app.dat file that is in the 0409 folder
it looks the same so you could also use that entire entry i think
one other thing
i loked at the packages and for example there isnt a youtube package in
you think i can use the youtube package i have in my wvga kitchen?
best regards
chris
;***IME_SWYPE***
Directory("\Windows\"):-Directory("Swype")
Directory("\Windows\Swype\"):-Directory("Azerty_LS")
Directory("\Windows\Swype\"):-Directory("Azerty_PT")
Directory("\Windows\Swype\"):-Directory("Qwertz_LS")
Directory("\Windows\Swype\"):-Directory("Qwertz_PT")
Directory("\Windows\Swype\"):-Directory("SwypeRef_LS")
Directory("\Windows\Swype\"):-Directory("SwypeRef_LS_Editing")
Directory("\Windows\Swype\"):-Directory("SwypeRef_LS_Numeric")
Directory("\Windows\Swype\"):-Directory("SwypeRef_PT")
Directory("\Windows\Swype\"):-Directory("SwypeRef_PT_Editing")
Directory("\Windows\Swype\"):-Directory("SwypeRef_PT_Numeric")
Directory("\Windows\Swype"):-File("SwypeArrowLeft_Blue.bmp","\Windows\SwypeArrowLeft_Blue.bmp")
Directory("\Windows\Swype"):-File("SwypeAzerty-LS-Latin1.zkb.le","\Windows\SwypeAzerty-LS-Latin1.zkb.le")
Directory("\Windows\Swype"):-File("SwypeAzerty-PT-Latin1.zkb.le","\Windows\SwypeAzerty-PT-Latin1.zkb.le")
Directory("\Windows\Swype"):-File("SwypeBasicWCL.bmp","\Windows\SwypeBasicWCL.bmp")
Directory("\Windows\Swype"):-File("SwypeBlueKey.bmp","\Windows\SwypeBlueKey.bmp")
Directory("\Windows\Swype"):-File("SwypeButtonWatchVideo.bmp","\Windows\SwypeButtonWatchVideo.bmp")
Directory("\Windows\Swype"):-File("SwypeCafeWCL.bmp","\Windows\SwypeCafeWCL.bmp")
Directory("\Windows\Swype"):-File("Swypecancel_VGA.png","\Windows\Swypecancel_VGA.png")
Directory("\Windows\Swype"):-File("SwypeCapitalization.bmp","\Windows\SwypeCapitalization.bmp")
Directory("\Windows\Swype"):-File("SwypeComma.bmp","\Windows\SwypeComma.bmp")
Directory("\Windows\Swype"):-File("SwypeEdit-LS-Latin1.zkb.le","\Windows\SwypeEdit-LS-Latin1.zkb.le")
Directory("\Windows\Swype"):-File("SwypeEdit-PT-Latin1.zkb.le","\Windows\SwypeEdit-PT-Latin1.zkb.le")
Directory("\Windows\Swype"):-File("SwypeEnglishUS.htm","\Windows\SwypeEnglishUS.htm")
Directory("\Windows\Swype"):-File("SwypeEnglishUS.zdb.le","\Windows\SwypeEnglishUS.zdb.le")
Directory("\Windows\Swype"):-File("SwypeFastSloppy.bmp","\Windows\SwypeFastSloppy.bmp")
Directory("\Windows\Swype"):-File("SwypeFrench.htm","\Windows\SwypeFrench.htm")
Directory("\Windows\Swype"):-File("SwypeFrench.zdb.le","\Windows\SwypeFrench.zdb.le")
Directory("\Windows\Swype"):-File("SwypeFullLogo.bmp","\Windows\SwypeFullLogo.bmp")
Directory("\Windows\Swype"):-File("SwypeGerman.htm","\Windows\SwypeGerman.htm")
Directory("\Windows\Swype"):-File("SwypeGerman.zdb.le","\Windows\SwypeGerman.zdb.le")
Directory("\Windows\Swype"):-File("SwypeInfoIcon.bmp","\Windows\SwypeInfoIcon.bmp")
Directory("\Windows\Swype"):-File("SwypeInfoIconFlashBig_Blink.png","\Windows\SwypeInfoIconFlashBig_Blink.png")
Directory("\Windows\Swype"):-File("SwypeInfoIconFlashBig_Normal.png","\Windows\SwypeInfoIconFlashBig_Normal.png")
Directory("\Windows\Swype"):-File("SwypeInfoIconFlash_Blink.png","\Windows\SwypeInfoIconFlash_Blink.png")
Directory("\Windows\Swype"):-File("SwypeInfoIconFlash_Normal.png","\Windows\SwypeInfoIconFlash_Normal.png")
Directory("\Windows\Swype"):-File("SwypeIntroVideo.wmv","\Windows\SwypeIntroVideo.wmv")
Directory("\Windows\Swype"):-File("SwypeItalian.htm","\Windows\SwypeItalian.htm")
Directory("\Windows\Swype"):-File("SwypeItalian.zdb.le","\Windows\SwypeItalian.zdb.le")
Directory("\Windows\Swype"):-File("SwypeKey.bmp","\Windows\SwypeKey.bmp")
Directory("\Windows\Swype"):-File("SwypeLicense","\Windows\SwypeLicense")
Directory("\Windows\Swype"):-File("SwypeLogo.bmp","\Windows\SwypeLogo.bmp")
Directory("\Windows\Swype"):-File("SwypeLogoIcon.png","\Windows\SwypeLogoIcon.png")
Directory("\Windows\Swype"):-File("Swypemore_VGA.png","\Windows\Swypemore_VGA.png")
Directory("\Windows\Swype"):-File("SwypeNoSpaceKey.bmp","\Windows\SwypeNoSpaceKey.bmp")
Directory("\Windows\Swype"):-File("SwypeNoSpaceOverlay.png","\Windows\SwypeNoSpaceOverlay.png")
Directory("\Windows\Swype"):-File("SwypeNumbers-LS-Latin1.zkb.le","\Windows\SwypeNumbers-LS-Latin1.zkb.le")
Directory("\Windows\Swype"):-File("SwypeNumbers-PT-Latin1.zkb.le","\Windows\SwypeNumbers-PT-Latin1.zkb.le")
Directory("\Windows\Swype"):-File("SwypePeriod.bmp","\Windows\SwypePeriod.bmp")
Directory("\Windows\Swype"):-File("SwypePool.bmp","\Windows\SwypePool.bmp")
Directory("\Windows\Swype"):-File("Swypeprev_VGA.png","\Windows\Swypeprev_VGA.png")
Directory("\Windows\Swype"):-File("SwypePut.bmp","\Windows\SwypePut.bmp")
Directory("\Windows\Swype"):-File("SwypeQuestionMark.bmp","\Windows\SwypeQuestionMark.bmp")
Directory("\Windows\Swype"):-File("SwypeQwerty-LS-Latin1.zkb.le","\Windows\SwypeQwerty-LS-Latin1.zkb.le")
Directory("\Windows\Swype"):-File("SwypeQwerty-PT-Latin1.zkb.le","\Windows\SwypeQwerty-PT-Latin1.zkb.le")
Directory("\Windows\Swype"):-File("SwypeQwertz-LS-Latin1.zkb.le","\Windows\SwypeQwertz-LS-Latin1.zkb.le")
Directory("\Windows\Swype"):-File("SwypeQwertz-PT-Latin1.zkb.le","\Windows\SwypeQwertz-PT-Latin1.zkb.le")
Directory("\Windows\Swype"):-File("SwypeReturnKeyIcon.png","\Windows\SwypeReturnKeyIcon.png")
Directory("\Windows\Swype"):-File("SwypeScreen.ini","\Windows\SwypeScreen.ini")
Directory("\Windows\Swype"):-File("SwypeSpanish.htm","\Windows\SwypeSpanish.htm")
Directory("\Windows\Swype"):-File("SwypeSpanish.zdb.le","\Windows\SwypeSpanish.zdb.le")
Directory("\Windows\Swype"):-File("SwypeThe.bmp","\Windows\SwypeThe.bmp")
Directory("\Windows\Swype"):-File("Swypewcw_divider_ls_VGA.png","\Windows\Swypewcw_divider_ls_VGA.png")
Directory("\Windows\Swype"):-File("Swypewcw_left_ls_VGA.png","\Windows\Swypewcw_left_ls_VGA.png")
Directory("\Windows\Swype"):-File("Swypewcw_left_pt_VGA.png","\Windows\Swypewcw_left_pt_VGA.png")
Directory("\Windows\Swype"):-File("Swypewcw_middle_ls_VGA.png","\Windows\Swypewcw_middle_ls_VGA.png")
Directory("\Windows\Swype"):-File("Swypewcw_middle_pt_VGA.png","\Windows\Swypewcw_middle_pt_VGA.png")
Directory("\Windows\Swype"):-File("Swypewcw_popup_left_VGA.png","\Windows\Swypewcw_popup_left_VGA.png")
Directory("\Windows\Swype"):-File("Swypewcw_popup_middle_VGA.png","\Windows\Swypewcw_popup_middle_VGA.png")
Directory("\Windows\Swype"):-File("Swypewcw_popup_right_VGA.png","\Windows\Swypewcw_popup_right_VGA.png")
Directory("\Windows\Swype"):-File("Swypewcw_right_ls_VGA.png","\Windows\Swypewcw_right_ls_VGA.png")
Directory("\Windows\Swype"):-File("Swypewcw_right_pt_VGA.png","\Windows\Swypewcw_right_pt_VGA.png")
Directory("\Windows\Swype\Azerty_LS"):-File("Azerty_LS_Blue_Shifted_WVGA.png","\Windows\Azerty_LS_Blue_Shifted_WVGA.png")
Directory("\Windows\Swype\Azerty_LS"):-File("Azerty_LS_Blue_WVGA.png","\Windows\Azerty_LS_Blue_WVGA.png")
Directory("\Windows\Swype\Azerty_LS"):-File("Azerty_LS_Standard_CapsLock_wBlue_WVGA.png","\Windows\Azerty_LS_Standard_CapsLock_wBlue_WVGA.png")
Directory("\Windows\Swype\Azerty_LS"):-File("Azerty_LS_Standard_Shifted_wBlue_WVGA.png","\Windows\Azerty_LS_Standard_Shifted_wBlue_WVGA.png")
Directory("\Windows\Swype\Azerty_LS"):-File("Azerty_LS_Standard_wBlue_WVGA.png","\Windows\Azerty_LS_Standard_wBlue_WVGA.png")
Directory("\Windows\Swype\Azerty_PT"):-File("Azerty_PT_Blue_Shifted_VGA.png","\Windows\Azerty_PT_Blue_Shifted_VGA.png")
Directory("\Windows\Swype\Azerty_PT"):-File("Azerty_PT_Blue_VGA.png","\Windows\Azerty_PT_Blue_VGA.png")
Directory("\Windows\Swype\Azerty_PT"):-File("Azerty_PT_Standard_CapsLock_wBlue_VGA.png","\Windows\Azerty_PT_Standard_CapsLock_wBlue_VGA.png")
Directory("\Windows\Swype\Azerty_PT"):-File("Azerty_PT_Standard_Shifted_wBlue_VGA.png","\Windows\Azerty_PT_Standard_Shifted_wBlue_VGA.png")
Directory("\Windows\Swype\Azerty_PT"):-File("Azerty_PT_Standard_wBlue_VGA.png","\Windows\Azerty_PT_Standard_wBlue_VGA.png")
Directory("\Windows\Swype\Qwertz_LS"):-File("Qwertz_LS_Blue_Shifted_WVGA.png","\Windows\Qwertz_LS_Blue_Shifted_WVGA.png")
Directory("\Windows\Swype\Qwertz_LS"):-File("Qwertz_LS_Blue_WVGA.png","\Windows\Qwertz_LS_Blue_WVGA.png")
Directory("\Windows\Swype\Qwertz_LS"):-File("Qwertz_LS_Standard_CapsLock_wBlue_WVGA.png","\Windows\Qwertz_LS_Standard_CapsLock_wBlue_WVGA.png")
Directory("\Windows\Swype\Qwertz_LS"):-File("Qwertz_LS_Standard_Shifted_wBlue_WVGA.png","\Windows\Qwertz_LS_Standard_Shifted_wBlue_WVGA.png")
Directory("\Windows\Swype\Qwertz_LS"):-File("Qwertz_LS_Standard_wBlue_WVGA.png","\Windows\Qwertz_LS_Standard_wBlue_WVGA.png")
Directory("\Windows\Swype\Qwertz_PT"):-File("Qwertz_PT_Blue_Shifted_VGA.png","\Windows\Qwertz_PT_Blue_Shifted_VGA.png")
Directory("\Windows\Swype\Qwertz_PT"):-File("Qwertz_PT_Blue_VGA.png","\Windows\Qwertz_PT_Blue_VGA.png")
Directory("\Windows\Swype\Qwertz_PT"):-File("Qwertz_PT_Standard_CapsLock_wBlue_VGA.png","\Windows\Qwertz_PT_Standard_CapsLock_wBlue_VGA.png")
Directory("\Windows\Swype\Qwertz_PT"):-File("Qwertz_PT_Standard_Shifted_wBlue_VGA.png","\Windows\Qwertz_PT_Standard_Shifted_wBlue_VGA.png")
Directory("\Windows\Swype\Qwertz_PT"):-File("Qwertz_PT_Standard_wBlue_VGA.png","\Windows\Qwertz_PT_Standard_wBlue_VGA.png")
Directory("\Windows\Swype\SwypeRef_LS"):-File("SwypeRef_LS_Blue_Shifted_WVGA.png","\Windows\SwypeRef_LS_Blue_Shifted_WVGA.png")
Directory("\Windows\Swype\SwypeRef_LS"):-File("SwypeRef_LS_Blue_WVGA.png","\Windows\SwypeRef_LS_Blue_WVGA.png")
Directory("\Windows\Swype\SwypeRef_LS"):-File("SwypeRef_LS_Standard_CapsLock_wBlue_WVGA.png","\Windows\SwypeRef_LS_Standard_CapsLock_wBlue_WVGA.png")
Directory("\Windows\Swype\SwypeRef_LS"):-File("SwypeRef_LS_Standard_Shifted_wBlue_WVGA.png","\Windows\SwypeRef_LS_Standard_Shifted_wBlue_WVGA.png")
Directory("\Windows\Swype\SwypeRef_LS"):-File("SwypeRef_LS_Standard_wBlue_WVGA.png","\Windows\SwypeRef_LS_Standard_wBlue_WVGA.png")
Directory("\Windows\Swype\SwypeRef_LS_Editing"):-File("SwypeRef_LS_Editing_WVGA.png","\Windows\SwypeRef_LS_Editing_WVGA.png")
Directory("\Windows\Swype\SwypeRef_LS_Numeric"):-File("SwypeRef_LS_Numeric_WVGA.png","\Windows\SwypeRef_LS_Numeric_WVGA.png")
Directory("\Windows\Swype\SwypeRef_PT"):-File("SwypeRef_PT_Blue_Shifted_VGA.png","\Windows\SwypeRef_PT_Blue_Shifted_VGA.png")
Directory("\Windows\Swype\SwypeRef_PT"):-File("SwypeRef_PT_Blue_VGA.png","\Windows\SwypeRef_PT_Blue_VGA.png")
Directory("\Windows\Swype\SwypeRef_PT"):-File("SwypeRef_PT_Standard_CapsLock_wBlue_VGA.png","\Windows\SwypeRef_PT_Standard_CapsLock_wBlue_VGA.png")
Directory("\Windows\Swype\SwypeRef_PT"):-File("SwypeRef_PT_Standard_Shifted_wBlue_VGA.png","\Windows\SwypeRef_PT_Standard_Shifted_wBlue_VGA.png")
Directory("\Windows\Swype\SwypeRef_PT"):-File("SwypeRef_PT_Standard_wBlue_VGA.png","\Windows\SwypeRef_PT_Standard_wBlue_VGA.png")
Directory("\Windows\Swype\SwypeRef_PT_Editing"):-File("SwypeRef_PT_Editing_VGA.png","\Windows\SwypeRef_PT_Editing_VGA.png")
Directory("\Windows\Swype\SwypeRef_PT_Numeric"):-File("SwypeRef_PT_Numeric_VGA.png","\Windows\SwypeRef_PT_Numeric_VGA.png")
miniterror said:
and here it is
i dont know f it works right for you as vga as some thing say wvga
you can always try and otherwise i have looked in the app.dat file that is in the 0409 folder
it looks the same so you could also use that entire entry i think
one other thing
i loked at the packages and for example there isnt a youtube package in
you think i can use the youtube package i have in my wvga kitchen?
best regards
chris
Click to expand...
Click to collapse
many thanks, will give it a go wvga will build but it won't size right
run a search, you should find what you need
chrisd1a1 said:
many thanks, will give it a go wvga will build but it won't size right
run a search, you should find what you need
Click to expand...
Click to collapse
thx for the rep
i think i will have to start building the rom to see what i actually miss
if i miss a thing and cand find it can ask if you have it?
miniterror said:
thx for the rep
i think i will have to start building the rom to see what i actually miss
if i miss a thing and cand find it can ask if you have it?
Click to expand...
Click to collapse
feel free, my diamond just died on me so i may be stuck for a while...
chrisd1a1 said:
feel free, my diamond just died on me so i may be stuck for a while...
Click to expand...
Click to collapse
sorry to hear that mate
can you still enter bootloader or is bootloader also dead?
miniterror said:
sorry to hear that mate
can you still enter bootloader or is bootloader also dead?
Click to expand...
Click to collapse
it's dead, dead.. no lights, no power. nothing.
good thing i've still got 20 days of the warranty.
chrisd1a1 said:
it's dead, dead.. no lights, no power. nothing.
good thing i've still got 20 days of the warranty.
Click to expand...
Click to collapse
you think it will work:-o
if you send it for repair and the manage to get it working again they will see the changed spl and rom
but i sure hope they can manage to fix it for you whitout complaining about it
miniterror said:
you think it will work:-o
if you send it for repair and the manage to get it working again they will see the changed spl and rom
but i sure hope they can manage to fix it for you whitout complaining about it
Click to expand...
Click to collapse
lol, it's an O2 XDA, i work for em and know the process. it it doesn't boot they are likely to swap it for a reconditioned one. (at least they have in the past) it costs less than trying to fix it.
here is hoping cos i wanted to get my build working fully before my upgrade