Please help me out I'm incredibly frustrated with this thing. I recently got the PDA2k and installed WM05 on it. It looks very nice and it runs speedy with no problems. My problem is the bluetooth which is huge thing to me. Either my headset (Tekkeon Eztalker Mini) is not compatible which I doubt or I'm making a stupid mistake.
This is what I did step by step: I click on the bluetooth icon and turn on the bluetooth, I then put my headset in pairing mode and the imate is able to recognize it and I enter the Pw and I put Set as handsfree. That's it, I would think I would be done at this point yet nothing happens, the headset doesn't do anything and I know its not Tekkeons fault because I was able to hook it up easily with my HP 6315.
So what's going what am I missing?
Also theres a tab at the bottom called "Com Ports" but I only see under this option "Incoming Port", and the description at the top says there should be another option called "New outgoing port". Does this have anything to do with it?
What Am i doing wrong? It's driving me crazy I can't really use the phone without the headset.
help me out pls
Bluetooth
I know the feeling, i have gone back to 2003 cause of that but now i am back on wm5. The bluetooth issue is not fixed yet, it is not stable, it keeps going off. There is a suspend cab file, but it does not work for me yet, also try pokect zen beta. You might get a longer period of bluetooth
thanks for responding, but the problem is not that it suspends or stops working. It doesn't start working at all even though the imate detects it. It's like it's not connected at all, not that it disconnects. I'm doing something wrong I just don't know what.
The bluetooth piece is not faulty and the unit is practically brand new. whats going on?
I used "Display Switch" binded button (From Wisbar Advance 2) or "Toggle Screen" (From SPB Pocket Plus) to turn off the backlight instead of using power button .
This work around will keep bt connection alive.
Note:
1. If you suspend your BA using psShutXP your bt connection .
2. You have to disable auto turn off device under Start -> Setting -> Power
Note:
1. If you suspend your BA using psShutXP your bt connection will be disconnected.
I'm sorry I'm not sure I'm explaining myself correctly. I understand that if the power goes off I will lose the BT connection but the problem is not KEEPING the connection alive, the problem is MAKING the connection. I follow all the steps , the imate recognized the headset but I'm not able to use it..also shouldn't a headset picture show up at the top of the screen when the bt headset is connected (cuz mine doesnt). what am i doing wrong?
thanks.
still need help please.. if someone can walk me through how to setup a bluetooth connection that would be great cuz I apparently haven't done it right.
The headset icon only shows in Phone app
The headset icon only shows up in the Phone application. It no longer is displayed in the notification area (top row).
If your device is paired up, when you make a call, you will see the headset icon in the top right corner.
You may also need to clear any old pairings that you headset has. I have a Jabra 250 and it happens all the time.
there we go you have solved my problem!. I didnt' have to open up the phone application on my hp 6315 to use the bt. So wait can I listen to music with windows media player through the bt headset or does it only work when making phone calls? I was able to listen to music on the HP 6315, is it different with the Imate or is it the NEW 05 os? Please enlighten me
thank you thank you
also one other thing does this mean that if i want to use the headset with the phone that I have to press the answer button on the imate rather than the headset..cuz that would suck big time.
what about when people call me can i answer with the answer button of the bt headset or no?
It works fine with the headset button for answering or hanging up.
Later.......... 8)
droy001 said:
what about when people call me can i answer with the answer button of the bt headset or no?
Click to expand...
Click to collapse
Related
I have a O2 XDAIIs been tring to find what exactly I need to do to ativate voice command with my bluetooth headset I have being looking
through the forums but am unable to find the sollution if there is one can someone point me in the right dirrection PLEASE GOING NUTS
I don't think it is possible. Problems with the integratino of Windows Mobile and the Bluetooth Static/Profiles.
So, is this a Blue Angel Issue, a Windows Moblie SE isuse, or both?
If just a Windows Moblie SE Issue does anyone know if WM2005 corrects this?
Thanks!
Its a windows issue rather than a BA issue I think, however there is a partial solution.
Press the connect button on your BT headset as if you were answering a call; then press the "contacts" button on your BA. You should then be able to speak into your BT headset. Once finished, disconnect the BT headset as normal
Not perfect, but a reasonable workaround. I have my BA in a cradle in my car & hardly need to glance at it in order to find the contacts button & get nearly-handsfree operation
Its a windows issue rather than a BA issue I think, however there is a partial solution.
Press the connect button on your BT headset as if you were answering a call; then press the "contacts" button on your BA. You should then be able to speak into your BT headset. Once finished, disconnect the BT headset as normal
Not perfect, but a reasonable workaround. I have my BA in a cradle in my car & hardly need to glance at it in order to find the contacts button & get nearly-handsfree operation
Dear weasel,
I have tried what you have advised to get BT head set to activate voice command. However, it don't work. Is there any thing else that I can do? I really hope I can dial a call via BT haed set.
Thank you.
Hi all,
I have been reading about the HTC Universal for a long time, but only became an owner on Monday.
I am having real trouble getting my o2 xda exec to work with my motorola HT820 bluetooth headset!
My problem is that the headset button does not trigger voice dialing.
What happens is this...
I press the headset button for a short beep and nothing!
I press it again for a short beep and my head set seems to connect to the phone and all sounds go through the headset.
But the button STILL does not trigger voice dialer.
The other thing that seems to work is that I press and hold the headset button and the phone automatically dials the last number to be dialed on the phone.
I am pulling my hair out and I cant think what the hell is wrong
I heard that the two devices made a great combination, but I can not get it to work yet.
Can anyone shine a light on my darkest hour?
P.S.
In case it makes a difference somehow, I am not an o2 customer and am with Vodafone. Because of this I removed the o2 active UI software by giving my device a hard reset and chosing a co-operate install.
I did not think this would cause any problems as I heard it was all garbage to do with o2 networks only.
Please guys this is driving me nuts!
Has anybody been through this?
I searched the boards and have not found anything
I can work on it tomorrow for as long as it takes, but I just do not have the faintest idea where to start.
Just wanted to say that I managed to get this working in the end by first using the bluetooth off cab file and then after a soft reset using the bluetooth on cab file.
Both from this thread:
http://forum.xda-developers.com/vie...stdays=0&postorder=asc&highlight=hack&start=0
I even have voice cmd working with contacts and everything!!!
I am a happy guy
Danny
ulic3190 said:
Just wanted to say that I managed to get this working in the end by first using the bluetooth off cab file and then after a soft reset using the bluetooth on cab file.
Both from this thread:
http://forum.xda-developers.com/vie...stdays=0&postorder=asc&highlight=hack&start=0
I even have voice cmd working with contacts and everything!!!
I am a happy guy
Danny
Click to expand...
Click to collapse
nice to hear, just bought a HT820 myself yesterday as finally a SHIPPING ROM with A2DP came out (QTEK weeee)
Have a problem, when i play music, i just hear the first second then it cuts out.
Also in bluetooth settings when i click/hold the stylus on the HT820 icon, i get options to set as either Wireless headset or Handsfree. Isn't this supposed to be automatic? Which do I set it to?
THanks...
Hello Everyone,
i am a proud owner of the S9 bluetooth headset and it worked very well at the beginning (1 day). Than i deletes 2 registry settings as mentioned in a forum somewhere (max bit pool stuff) to get better sound quality.
I dont know if it is the cause of the problem i got now but next day the S9 was gone in the bluetooth device list of my touch dual and cant be found anymore. the strange thing about it is that if i press the telephone button on the S9 the ms voice command icon appears and i can talk to it. also the touch dual seems to use the s9 as headset as the ring tone volume is switched to zero and the headset icon appears in the calling screen (after pressing the send button)
anyway i am not able to conect the s9 for music transfer and that is the problem if got..
any chance to delete the touch dual in the s9 settings so it allows a repairing? or somehow recovering the appearance of the s9 in the device list of the ppc?
any suggestions are welcome.. nice sunday everone
Edit:
Problem solved.. dont know how but the pocket pc found the headset finally again..
Glad that it works again for you.
I have a Blueangle with WM 6.1 and the S9.
Can you get yours to play music and have the display off (not dimmed but off). I have found a device lock that works fine while BT is off however when BT is on and connected to the S9 it always wakes up the screen.
What Version of WM are you running ??
Oops, sounds like my yet-to-be-solved case.
What I have: Qtek 9100 and Jabra BT250v. Some time ago I also deleted this partnership (don`t ask why) and when tried to re-establish it again, the device kept declining the connection with the headset. The device finds the headset, asks for a password and whatever combination of digits I enter it rejects to establish a new partnership.
I guess, the problem is in registry. Anyone could help with this one? What should I fix in a registry to re-pair the headset and device? Thanks in advance.
Ok in case anyone else got that problem i guess i know what it caused: i paired the bluetooth headset with my laptop after pairing it with the pocket pc. and although no service could be used (ms bluetooth stack) the S9 didnt use the PPC as standard music device but the laptop. after deleting the pairing from the laptop the S9 i could pair it to the ppc again.
about MDAIIIUser's problem: dont know any way of listening to music with the device turned off. i use AE Button to switch display off by double cklicking the green button or starting S2U2 by double clicking the red one. anyway, if display is switched off and i press a button on the bluetooth headset the display turns on again thats why i just lock the device and dont care if the display is on for some minutes in my pocket..
Hello at all,
I've searched a long time for a solution, but I really couldn't find it.
I have an
- Ameo (same like HTC x7500, with original t-mobile WM6 german) and a
- LG Style-i HBM 700 - http://www.amazon.com/gp/product/B001CZICHA , for calling.
I had bought a couple of weeks ago a wunderful bluetooth bracelet LM 959. http://www.lm-technologies.com/ci/index.php?/products/details/38
Both, the bracelet and the Style-i want and could connect to my Ameo over the same profile (phone profile, hands-free).
I've tried a couple of days, but it doesn't run as I want:
I want that the bracelet will shake when the phone is ringing (that's normal).
And then I will accept the call with my LG Style-i. If the call finish, all should go again in stand by.
If the next call arrive, the bracelet have to shake first, and so on.
But reality is hard and bad:
If I power on the bracelet, and power on the LG iStyle the bracelet go in sleep and the LG Style-i is active connect to my Ameo. No action's could make the bracelet function, only if I power off the LG Style-i. But than I couldn't take a call (not with this brick on my ear)
I think both are using the same profile (hands-free). And only one could go in active, or ?
Is there a way to let both function, and as I want ?
I would be lucky for any suggestions.. any idea ?
I'm afraid I can't answer that with any experience, but I think the bluesoleil driver will allow connections to two devices.
When someone with more experience comes along, does anyone know if it is possible to connect two devices with different profiles.
I wish to connect my car kit (HFP) and an audio streaming connection (A2DP), to a kaiser, and keep them both connected.
ping, I want infor on this to for my ameo before I buy the bracelet!!
new status:
I've seen, that all entries in the registry between the braclet and the LG style-i are different. Not the channel entry : both are channel 0x2.
I've changed the channel from bracelet in the registry:
HKLM/Software/Microsoft/Bluetooth/Device/001b3500023b
from 0x2 to 0x1.
Bracelet connect with Ameo furthermore, but situation doesn't changed.
Now I will change the ROM from 6 to 6.1 (from original t-mobile 6 to sogarth 6.1) this weekend.
let me see ...
bad story ... sorry.
I've changed the ROM from original t-mob WM6 to sogarth WM 6.1 ROM but without any changes.
I've no solution to connect the bluetoorh bracelet AND the Bluetooth headset at the same time.
Any other idea's ?
please help ...
Not possible afaik. I personally tried it when I had two Motorola s9s and only one would connect at the same time :S.
Does anyone know if you can connect to *different* profile devices?
I want to connect a HFP device and an AD2P device.
ian_c said:
Does anyone know if you can connect to *different* profile devices?
I want to connect a HFP device and an AD2P device.
Click to expand...
Click to collapse
Hello all,
I'm currently using wm6.1 build 20273.1.3.3 cook (FInixNOver v3.6) on my Trinity with iDream BTSH01 + Nokia BH-102.
The BTSH01 can act as either "Hands Free" or/and "Wireless Stereo" (A2DP).
I can select which mode I want to use on that device by using the standard "Bluetooth Settings-->Device" menu.
The BH-102 is only an "Hands Free" device.
I successfully can listen music on the iDream and make/receive calls with the Nokia.
As you may guess, my main use of these combination is on the car! the Trinity is used as my MP3 player, my GPS and my phone with ear bud, while its battery is being charged.
The BH-102 works very smooth alone! just need to power it on, wait 2-3 seconds to ear the beep and start to use it, even while receiving a call (it happens a lot while I'm driving!).
That particular cook has the BT sound volume adjustment working very well!
The BTSH01 is tricky to pair... I always have to start it in "pairing" mode and do a BT search on the Trinity (I have a button on the "Today" for that!) to have it work properly. If I not do this way, the music is shopped in 500ms pieces !!!
I can only launch the music/sound app (Mortplayer and/or GPS app) after pairing it. If not, the sound goes out through the internal speaker.
By having the BTSH01 decoding music, the HTC becomes slower (still ok for the GPS app)!
Now, combining both... I'm using both since a couple of days and I still have no procedure to have both running ok (BTSH01 as "Wireless Stereo" and BH-102 as "Hands Free") at first shot!
Sometimes the BTSH01 start to decode my calls, sometimes the BH-102 is not able to pair ... it's always been asked the PIN code.
But, once both are up, I have no more troubles and can start my trip!
i'm using an r35 itech set as handsfree...although it can be switched to include a2dp. however, i also have a sony ericsson car kit that's set for a2dp or wireless stereo. thus, when i'm in the car my u1000 automatically connects to the ericsson and thus streams the music. any calls that come i can answer through my r35. when i leave the car, the ericsson then disconnects with my u1000 (either through range or when i shut off the ignition). my r35 is continuously bonded and thus any calls are answered through it.
i don't think it's really possible to connect 2 bt devices with hands free profiles at the same time. i tried that with both my r35 and ericsson kit....if the first device bonded is my r35 a message appears on my ameo indicating an error when i try to set hands free. it only accepts wireless stereo.
cheers
I don't think so. In my opinion it's not possible. u can use stereo.
hello friends,
my logitech headset bluetooth seems to working properly,
it is properly recognized and function without problems until i shut the headset but ,when I turn it on again, the system does not recognize anymore. I have to remove the headset of the list from bluetooth devices and i have to register again on the system... to use it properly (until next headset shutdown).
Of course this does not happen wm6.0 original. I use Kavana rom (modified by Rickwatt).
someone know a remedy for this bug?
Thanks brothers
fwood said:
hello friends,
my logitech headset bluetooth seems to working properly,
it is properly recognized and function without problems until i shut the headset but ,when I turn it on again, the system does not recognize anymore. I have to remove the headset of the list from bluetooth devices and i have to register again on the system... to use it properly (until next headset shutdown).
Of course this does not happen wm6.0 original. I use Kavana rom (modified by Rickwatt).
someone know a remedy for this bug?
Thanks brothers
Click to expand...
Click to collapse
When you shutdown your headset, turn off bluetooth then back on then, turn on your headset, give it a try as thats what i do.
Generally also open up media player after headphone sync
Thank you for your reply Stylez.
I tried but unfortunately without success !If I'm going in bluetooth settings and select "set as heands-free" ... nothing happens. With the WM6.0 rom was in this way and the headset was recognized! I tried to turn off and on ..many times bluetooth and headset..... still nothing !
I must delete headset in the list and register it again!
I'm having same prob.