Hello!
I can`t get connect whit activesync any more when I get a wrong rom for my wallaby device!
It have been nice if any body can send me a wallaby 1010 rom mmc/sd file??
Hope for reply!
http://www.romkitchen.de/
make a rom and use xdatools to put it on a sdcard
when a rom is places on a sd card it cant be copied or even read by a sdcard reader
Related
I have a backup of a rom ESN of qtek 2020i copied in a sd 256mb and downloaded by ftp.
I modify the first 416b (lines 000h to 0190h) extract the rom to my sd 512mb, start my pda, in mode bootloader, the pda install the rom, but it does not work
Is it possible that that the problem is that I use a sd 512mb instead of a sd 256mb?.
Please, help me.
Thank you.
Regards
Hi everyone,
I really need help.... I have an spv m5000 and a 1 gb kingston sd card wich works perfectly on my mp3 player ( I can read, upload and erase files). the thing is that in the spv I can read but I can't upload nor erase files.
I have already format the card and still the same problem
Any suggestion, any idea ??
thanks a lot
Rodrigo
Is the little lock switch on the card itself (usually on the left side as you look at the front) set in the lock position? That would allow you to read without being able to modify files.
On my Transcend card the switch is locked when it is in the down position, and unlocked when it is up.
I hope that helps, that's the only thing I can think of right off.
Thanks you for that ...but I've have try the upper possition, the lower postion and the middle (almost SD card Kama sutra ) possition and still not working.
anyway thanks for the tip
rodrigo said:
Hi everyone,
I really need help.... I have an spv m5000 and a 1 gb kingston sd card wich works perfectly on my mp3 player ( I can read, upload and erase files). the thing is that in the spv I can read but I can't upload nor erase files.
I have already format the card and still the same problem
Any suggestion, any idea ??
thanks a lot
Rodrigo
Click to expand...
Click to collapse
What did you use to format the SD Card? Your computer or the Universal itself?
You can try and install WM5torage, an application that would allow you to view the SD Card while still in the Universal as a drive. Activate WM5torage and connect it via USB, then try "quick format" the SD Card this way.
Solved
Thank you so much for the wm5torage...... that solve the problem with out format
thanks again
Rodrigo
Does anybody know if I can upgrade my HTC Wizard ROM to WM6 using my SD card? My USB port was broken and I am unable to connect USB to ActiveSync. I have seen a thread to do that using XDATools but I could not do it. Would you please help me to do flash my ROM using SD Card? Thanks.
Well its possible to backup the present rom onto a sdcard and in times of need can be re flashed back to the phone again,but to flash altogether a new rom on a sdcard and flash to the phone is not possible.
There's,however, a slight chance,if you can get hold of a phone similar to your with same specifications (make & model) and it has wm6 installed on it,make an sdcard backup of that rom and insert the card in your phone and try to flash,it might work.Just a brainwave
Hi,
Tried this rom, but file size mismatch (rom is only 41MB).
Read somewhere you have to flash this from SD card.
But : now almost everyone works with SDHC cards, and for all the roms that we flash, we have to pull out the SDHC card or flashing does not work.
Any other methods to flash this rom without card in it ?
Thanks,
Innovator
I've been asking the same question, but nobody answered.
I wish I could have this mini ROM.
Would appreciate all helps.
No other possibility....
... as far as I know. Either via activesync or via a non-sdhc card. Don't you have a "forgotten" sd-card in another phone?
Even the smallest card (from 64 mb or more) will do.
Good luck!
HJ
it gives " invalid certificate" error while trying to flash from SD card
any solutions to this prob..
much appreciated.
I flash this ROM using 2GB SD Card.
Your Device it should be Hard SPL first.
I flash this ROM using an old 2GB SD Card. Took few minutes and its done.
Hi all,
Is it possible to flash a device from SD Card ?
How to proceed ?
Can I save RUU and .NBF files on SD card and after start the device, run the RUU ?
My device is not USB connecting (Suyncronize and battery charge) after flashed a WM 6.5 ROM, so no comunication with PC, then I thought flash another ROM from SD Card, once device is running.
Tks,
Cássio
some devices support it
click XDA-Wiki on the titlebar
and find your device and look what and how or if it's don on the device you own