Does any one know of a very short cable that will go from PDA2k to Akron speaker input. I think it is 2.5mm stereo male to 3.5mm mono male. The Arkon comes with a cable and adapter that work but it is too long and untidy.
Anybody know of an adapter cable that fits the HTC USB-variant and lets me plug in a 2.5mm headset (phones + mic)?
Something like this:
http://www.amazon.com/Stereo-Headset-Speaker-Adaptor-phones/dp/B0013URK04/ref=pd_cp_cps_2
but hopefully something sturdy, including microphone support and with a 2.5mm terminator.
My headset of choice is wired and comes only with a 2.5mm plug, in case you want to know 'why'
EDIT: I did find this:
http://www.amazon.com/OEM-Converter-Cingular-T-Mobile-Cavalier/dp/B001RXTDP2/ref=pd_cp_e_1
But it's a huge dangling dongle, and I don't need the added 3.5mm or usb ports, so something more minimal would be in order.
I would really like to know if it is possible to get audio out from the Micro USB port. I want to use my GN2 in a car dock with audio out to my head unit RCA audio inputs.
I would rather dock with one connection via the micro usb port for charging and Audio out.
Using an NFC tag on the car dock to open Car Home Ultra when docked.
There is some sort of adapter/unit you can buy to do this. Iv have seen people post it, if I see the name of it I'll post on here.
Sent from my Galaxy Note II using XDA Premium.
Yes and I have to say the quality is amazing. You need an otg cable, just a couple of bucks on amazon or fleabay. It has a male mico on one end and a female usb on the other. You can then hook this up to any driverless headphone amp or usb dac of your choice. I have tested with an odac and a fiio e7 and both worked flawlessly.
guisar said:
Yes and I have to say the quality is amazing. You need an otg cable, just a couple of bucks on amazon or fleabay. It has a male mico on one end and a female usb on the other. You can then hook this up to any driverless headphone amp or usb dac of your choice. I have tested with an odac and a fiio e7 and both worked flawlessly.
Click to expand...
Click to collapse
So there is no analog audio out then?
I do have the OTG cable, so I suppose THIS would probably work:
Along with THIS
To my head unit.
Originally Posted by guisar View Post
Yes and I have to say the quality is amazing. You need an otg cable, just a couple of bucks on amazon or fleabay. It has a male mico on one end and a female usb on the other. You can then hook this up to any driverless headphone amp or usb dac of your choice. I have tested with an odac and a fiio e7 and both worked flawlessly.
So there is no analog audio out then?
I do have the OTG cable, so I suppose THIS would probably work:
Along with THIS
To my head unit.
Click to expand...
Click to collapse
That may be a possibility. I've also heard that iBolt is releasing a Note II Car dock that may support this feature. However it is not due out until the end of December.
If you just want analog out, then the headphone is as good as any. The http://www.amazon.com/gp/aw/d/B003N0XDT4/ref=mp_s_a_1?qid=1353503718&sr=8-1&pi=SL75fiio. (hope the kink insert works... ) is cheap and will provide much better quality and level than the headphone jack. I. am not sure if the dac you linked to runs off usb or needs a separate supply. If you need rca jacks then its a male 3.5mm to male rca. There is a good quality pre amp that will give you 2v at least (close to standard car amp input) The one you linked to provides about 1.25v. I have not seen measurements of that dac so don't know how it compares to one in gn2.
The microusbs advantage (or limitation depending on your viewpoint) is that it gives you access to the pure digital signal which of course needs a dac. The dock linked to above and all others I've seen either reroute the headphone jack or provide a really terrible integrated dac which sounds much worse than the headphone jack.
Hello all,
I just purchased the ONE and as part of a promotion from T-MO US they gave me a free car adapter. I would like to hardwire the car adapter to my car, but the connection cable they gave me was just a Micro-USB charging cable.
I do not want to have to dock the phone then have to insert a 3.5mm headphone cable into the top of the phone and have wires running all over the inside the car.
I can modify the bootom of the dock to accept an MHL cable instead of Micro-USB, but I need to find a product that break off MHL into USB (hardwire for charging) and 3.5mm headphone jack that I can then plug into the back of my factory stereo behind the dashboard, thus only having to dock the phone and not have to plug anything else into it.
Any suggestions on such a product?
This thread might help....
http://forum.xda-developers.com/showthread.php?t=1321491
Anyone know of a usb-c to stereo trs microphone adapter?
All the adapters I can find are usb-c to single trrs (4 pin 3.5 plug) which only does mono microphone input