I have upgraded my rom to the new IMATE one and it is now stuck on the first splash screed and wont go any further, i have tried reflashing it a number of times but still no luck.
My universal is now completely dead no bootloader or nothing does anyone know somone who has hardware to reflash the rom
flash instructions new i-mate ROM
After failure, keep Universal connected to PC (with weak visible USB screen) and just retry to flash after soft reset of Universal. Use MaUpgradeUt_noID.exe in flash directory on PC to start. I sometimes have to restart MaUpgradeUt_noID.exe if no luck with flashing and to reflash radio only if Universal is stuck after flash. Good luck. NB. I flashed my MDA Pro succesfully this night after several retries and it is faster, better now.
The screen is blank the the pc just say usb not reconized
please read point 2 here:
http://forum.xda-developers.com/viewtopic.php?t=4534
just got in contact with HTC say about £40 to have it reflashed, so not that bad!!
dude_super said:
The screen is blank the the pc just say usb not reconized
Click to expand...
Click to collapse
try plugging the usb cable into a different socket, then retry the flash
Easy...
I run in the same problem, the procedure bellow help me to solve the problem ...
1. Make sure your i-mate™ device is not Connected to the PC and remove the dummie card or SD/MMC card
2. On your Desktop PC, open Microsoft ActiveSync, then go to File > Connection Settings > Remove the Selection from “Allow USB Connection with this desktop computer”
3. Reconnect your i-mate device to the Desktop PC using the USB Cradle and the Charger MUST be Connected to the Cradle (Don’t use the IrDA or Bluetooth for the Upgrade)
4. Run the Upgrade again and it will work fine without any problems.
Fingers crossed to work with you as well..
I had same problems but i found solutions:
after update the all three files of rom install one more time radio.nbf only. pAfter that reset device by stylus wth pushing Power button.
Device is working.
Sorry for my stuped english
Best regards
marchewa
simon_darley said:
please read point 2 here:
http://forum.xda-developers.com/viewtopic.php?t=4534
Click to expand...
Click to collapse
Who pissed in your Wheaties, Simon? The posting had a reasonable subject line.
The PC wont even connect and cant get the bootloader to come up so it is completly dead, so will have to send back to HTC, most likly take them 5 mins to do
dude_super said:
The PC wont even connect and cant get the bootloader to come up so it is completly dead, so will have to send back to HTC, most likly take them 5 mins to do
Click to expand...
Click to collapse
before sending back try this:
-disconnect USB cable
-disable USB connection in desktop ActiveSync
-connect USB cable
-start mtty (download here)
-create new connection and select USB from ports
press enter to see USB prompt in mtty:
USB>
type (dont copy&paste):
set 14 0
and press enter
then reboot Universal.
it should boot normally.
buzz (of course HIM)
ciao
Thanks i have tried that i think the last time i flashed the rom it messed up the bootloader so cant get any connection with the PC now
Have you tried the various ways to reboot the universal?
Like holding down the two white dashes on the top of the keypad, while pressing the reset button?
Just a thought, but somewhere here is at least three different ways to wake up the JasJar. And reset plus power is not one of them. Note don't expect to get a screen light anymore. Any way that you might have access to a charge battery? If you allow the battery to fully discharge it can be hard to restart the charging process, your battery might just be uncharged.
The battery was fully charged when it died, and i have tried all the ways said on the forum to get it to wake up again, i think it was the error i got when it was flashing the rom and stoped half way through
My MDA Pro died too
Hi all, after changing battery on my MDA Pro it died.
Rebbot it's impossble, I tried all.
When I connect USB cable to pc don't recognize device.
If I connect it without battery the signal led light red end if i put the battery switch off.
What's happens?
By all
Re: My MDA Pro died too
Klaus said:
Hi all, after changing battery on my MDA Pro it died.
Rebbot it's impossble, I tried all.
When I connect USB cable to pc don't recognize device.
If I connect it without battery the signal led light red end if i put the battery switch off.
What's happens?
By all
Click to expand...
Click to collapse
Try to put the universal in bootloader mode.
push power+light+reset hole
hope it helps
MaX
Re: My MDA Pro died too
Ti ringrazio ma ho provato di tutto di più..è proprio morto..
Certo devo dire che è l'acquisto più sbagliato che abbia mai fatto.
Uno strumento davvero inutile..
Lo spedirò in assistenza..speriamo bene..
Ciao e grazie comunque..
aefelix said:
Klaus said:
Hi all, after changing battery on my MDA Pro it died.
Rebbot it's impossble, I tried all.
When I connect USB cable to pc don't recognize device.
If I connect it without battery the signal led light red end if i put the battery switch off.
What's happens?
By all
Click to expand...
Click to collapse
Try to put the universal in bootloader mode.
push power+light+reset hole
hope it helps
MaX
Click to expand...
Click to collapse
http://forum.xda-developers.com/viewtopic.php?p=252135
Related
Im a new comer. The 1st time I upgrade my XDA exec but not successfully. I couldn't remmember which ROM i used but it suddenly cancelled when it was running (nearly 90%), I pulled out the cable when it hadn't finished yet. Now, my Exec doesn't work, I can't see blinking orange or green light, only red light appears when I plug in the cable.
I don't know which errors I met and don't know how to resolve this, I need your help, please!
oriolemax said:
Im a new comer. The 1st time I upgrade my XDA exec but not successfully. I couldn't remmember which ROM i used but it suddenly cancelled when it was running (nearly 90%), I pulled out the cable when it hadn't finished yet. Now, my Exec doesn't work, I can't see blinking orange or green light, only red light appears when I plug in the cable.
I don't know which errors I met and don't know how to resolve this, I need your help, please!
Click to expand...
Click to collapse
RTFW and reflash using bootloader.
hic hic
I'm still elementary, i cannot totaly understand those words, could them be more clearly?
1st: Download a working ROM like this: Helmi 3.5 v 1.3.1: http://www.megaupload.com/?d=3S300TQ8
Everything is already in there with the exception of the RADIO ROM (radio_.nbf) and the EXTENDED ROM (ms_.nbf). These you can leave alone, in your case your device will use the old existing one. If you want to upgrade to the latest RADIO ROM. Look for Radio 1.18.00 and copy radio_.nbf and add that file to the folder you already have.
2nd: After extracting the files and placing them on one folder. Place your device on boot loader mode by PRESSING THESE SIMULTANEOUSLY:
POWER BUTTON
RESET PIN HOLE
BACKLIGHT BUTTON
3rd: Connect your Universal via USB cable.
4th: Double tap Ma Upgrade NO ID file to run it. Just follow the screen commands.
---
- The only thing seem to be "alive" in my PDA is RED LIGHT
- Everything doesn't work anymore
- Nothing appears on screen when SR, HR
- Cannot get into Bootloader
It's my EXEC
oriolemax said:
- The only thing seem to be "alive" in my PDA is RED LIGHT
- Everything doesn't work anymore
- Nothing appears on screen when SR, HR
- Cannot get into Bootloader
It's my EXEC
Click to expand...
Click to collapse
It might appear that way.
If you check the screen in boot loader mode under a good light. You will notice the screen has version numbers on it. That is normal. The backlight screen DOES NOT turn on when in boot loader mode. So check it under a nice lighted area.
---
Anyone thinks this is a Flash error?
oriolemax said:
Anyone thinks this is a Flash error?
Click to expand...
Click to collapse
If you are still unable to enter bootloader, remove the battery, wait 10 seconds, re-insert the battery, the hold the backlight whilst pressing the power button. This should get you back into bootloader mode, there is no back lit screen when in bootloader, but if you look carefully you will serial or usb on the screen.
Now re-flash a decent Rom.
Cheers,
Beast
ps, never remove the cable untill the flash utility tells you to!
hic
I removed it for 10... hours. Nothing but "USB Divece not recognized!"
oriolemax said:
I removed it for 10... hours. Nothing but "USB Divece not recognized!"
Click to expand...
Click to collapse
So I assume you can go into boot loader mode now...
On your computer, use the built-in file manager to kill these 3 applications prior to attaching your Universal in boot loader mode via USB:
1: rapimgr.exe
2: wcescomm.exe
3: WCESMgr.exe
Good luck...
---
When it says nothing at all!!!
Hic, I'll kill this EXEC!
I've sent it to many machinists, all of them have no ability to resolve such problem. I put my EXEC on a bed and take them to jungle, waiting for a prince to rescue.
My EXEC still deeply sleeping....
hic...
i flashed my touch diamond with a cooked rom every thing went well untill 1st reboot after completing the flash then black screen with diamond touch logo and nothing i have tried soft reset many times usb cable is not detectable then i tried the program ECShift.exe
when i write ECShift.exe -bl in cmd it says "could not open EC!" so i can not use mtty please help what i can do with the device is it now broken for final or it can be repaired since i can not log in to bootloader
also when i switch it off and put the usb cable it indicates that it is recharging but when i try to turn it on it doesn't start and if i unplugged the usb cable now it still gives me the indication for recharging (whispering light)
usb is not recognized even when making hard reset without formatting the internal storage i get the colored screen the the 3 choices so fast even the diamond does not detect it is connected to pc it suppose to give me a screen writing usb
hi i have the same problem with diamond! you can fixed?tanks
Help pls i have olinex 1.40 hardspl in but my phone is stuck in bootloader with "upgrade ROM code error Please try again" i cant get out...tried hard reset nothing...tried recovery mode (volume down + reset ) nothing...cant get a usb connection help!!!!!!!!!!!!!!!!
are you sure you don't have usb connection? try running an ruu with usb plugged in see if it runs. it sounds like you tried to flash a radio from another device. try flashing a new radio.
Blazeitup123 said:
are you sure you don't have usb connection? try running an ruu with usb plugged in see if it runs. it sounds like you tried to flash a radio from another device. try flashing a new radio.
Click to expand...
Click to collapse
the bootloader shows usb when i plug it in and serial when i plug it out...when hard resetting it goes through the formatting but then just jumps back to bootloader with the message...active sync recognizes nothing but i'll try that right now
edit - ok it seems to be flashing i'm crossing my fingers
edit: ok it seems to have flashed i see my rogers main screen thank you soooooooooooooooo much
glad to hear!
just so you know you can always flash from bootloader. i have seen alot of people around here saying "oh no, my device is bricked and i'm stuck in bootloader". i lol.
Blazeitup123 said:
glad to hear!
just so you know you can always flash from bootloader. i have seen alot of people around here saying "oh no, my device is bricked and i'm stuck in bootloader". i lol.
Click to expand...
Click to collapse
lmao now i know..i was coming from an elfin, not used to diamond as of yet but now i know
Bootloader bottom says "serial" but wont switch to "usb"
Perhaps this is a known issue but I could not find the solution easily and ended up discovering it myself so wanted to share it in case others face the same.
I was try to use the mtty software to "clean" my touch diamond in an effort to get rid of some bugs in macadam 1.2 rom [great rom, by the way].
I had disabled the usb connections in active sync on my laptop [mac running windows xp in bootcamp]
I could enter bootloader easily but the bottom part of the multicolor screen kept saying "serial" and would not switch to "usb" when I connected the phone to the laptop.
What finally worked was ensuring that the phone was set for "activesync" rather than use as a "disk drive" or "internet sharing". I had assumed, wrongly, that once in bootloader the last selected option [disk drive] would be irrelevant.
So I exited the bootloader by pressing the reset key; connected phone to pc via cable; selected the active sync option; disconnected the phone; entered bootloader, connected the phone via cable again and the bottom of the bootloader changed to usb and I was able to use mtty successfully.
I wonder if this has implications for people stuck with bad flashes etc. In my case I could easily exit the bootloader and go back and select 'activesync' from the working phone. One could also hard reset if a working rom was on the phone...
BUT If one is stuck with the option of only the bootloader, would it matter on what the last selected option was [active sync or use as usb disk drive or internet sharing]?
faisal said:
Perhaps this is a known issue but I could not find the solution easily and ended up discovering it myself so wanted to share it in case others face the same.
I was try to use the mtty software to "clean" my touch diamond in an effort to get rid of some bugs in macadam 1.2 rom [great rom, by the way].
I had disabled the usb connections in active sync on my laptop [mac running windows xp in bootcamp]
I could enter bootloader easily but the bottom part of the multicolor screen kept saying "serial" and would not switch to "usb" when I connected the phone to the laptop.
What finally worked was ensuring that the phone was set for "activesync" rather than use as a "disk drive" or "internet sharing". I had assumed, wrongly, that once in bootloader the last selected option [disk drive] would be irrelevant.
So I exited the bootloader by pressing the reset key; connected phone to pc via cable; selected the active sync option; disconnected the phone; entered bootloader, connected the phone via cable again and the bottom of the bootloader changed to usb and I was able to use mtty successfully.
I wonder if this has implications for people stuck with bad flashes etc. In my case I could easily exit the bootloader and go back and select 'activesync' from the working phone. One could also hard reset if a working rom was on the phone...
BUT If one is stuck with the option of only the bootloader, would it matter on what the last selected option was [active sync or use as usb disk drive or internet sharing]?
Click to expand...
Click to collapse
This doesn't make any difference. When you're stuck in bootloader just plugin your USB and the display will state "USB" as well. You can flash a rom at this point.
I want to upgrade rom on may diamond but when conect the phone to my conputer the phone it just starts to charge. The computer does not detect him and I have activated usb conection on the phone.
I am using a standard miniusb cable used also for canon fotcamera, Nokia N95, motorola V3 (v360 L6, L7 etc.)
I did instaled Activesync on my computer but still no result.
You did no say which Win OS you are using - If Vista then you do not need activesync (AS) but windows mobile device centre or any other Win OS Before Vista then AS is what you need. AS needs to be installed before you connect your phone to the PC.
Have you restarted your PC first before install - this also helps sometimes
Try this....
Start>Settings>Connections>USB to PC and here ....uncheck the box Enable advanced network functionality
Just a reminder to please use the Internal Method when flashing a new Rom or Radio. Do not rely on your PC as errors occur more frequently.
R3PUBL1K said:
You did no say which Win OS you are using - If Vista then you do not need activesync (AS) but windows mobile device centre or any other Win OS Before Vista then AS is what you need. AS needs to be installed before you connect your phone to the PC.
Have you restarted your PC first before install - this also helps sometimes
Click to expand...
Click to collapse
I am using Win XP SP2 and I have tried every thing that you said but nothing.
band27 said:
Try this....
Start>Settings>Connections>USB to PC and here ....uncheck the box Enable advanced network functionality
Just a reminder to please use the Internal Method when flashing a new Rom or Radio. Do not rely on your PC as errors occur more frequently.
Click to expand...
Click to collapse
I did uncheck that box but without any results so now I will try internal method. But I'll have to send the file to the phone via bluetooth and see if it works.
band27 said:
Just a reminder to please use the Internal Method when flashing a new Rom or Radio. Do not rely on your PC as errors occur more frequently.
Click to expand...
Click to collapse
How much is it supose to take "Internal method"?
After pressing Vol_Down + Back button it showed the three color screen then it changed to a white screen with loading on it and it stays like that (after pressing Vol_Down + Back button I didn't press nothing else).
The Internal Method shouldn't take you any longer then 2 min. or so.
Once you have started the flashing to begin in the Grey menu....it will eventually say OK...OK
and yes
at this stage you soft reset and press vol down and centre round button.
Grey menu then gives you a choice to reset back to manufactures settings which is what you want (vol UP)......this should take an additions 2 min. if that.
band27 said:
The Internal Method shouldn't take you any longer then 2 min. or so.
Once you have started the flashing to begin in the Grey menu....it will eventually say OK...OK
and yes
at this stage you soft reset and press vol down and centre round button.
Grey menu then gives you a choice to reset back to manufactures settings which is what you want (vol UP)......this should take an additions 2 min. if that.
Click to expand...
Click to collapse
I have tried everything that you said and nothing.
The only diference is that now when I conect the cable to the phone it asks me witch mode to conect it (Activesync or storage), but the computer still doesn't see's it.
Tried another USB-cable?
chribruu said:
Tried another USB-cable?
Click to expand...
Click to collapse
I tried with 3 diferent cables.
Have you tried putting your device into bootload mode (soft reset & vol. down) and the connecting to your pc. The bottom of your coloured screen should switch from serial to usb....If this switches to USB then you are good to go with downloading what ever Rom using the RUU_
Keep me posted...
band27 said:
Have you tried putting your device into bootload mode (soft reset & vol. down) and the connecting to your pc. The bottom of your coloured screen should switch from serial to usb....If this switches to USB then you are good to go with downloading what ever Rom using the RUU_
Keep me posted...
Click to expand...
Click to collapse
It doesn't switch's to usb it only shows "serial". If I put it into bootmode while it is conected to USB it shows nothing, not "USB" or "Serial" it's blank.
I am begining to belive that there is a hardware problem in my phone.
Do you have .NET framework installed on your PC! if not, get it from http://www.microsoft.com/downloads/d...DisplayLang=en
Hi all, i have problem with my P8000. My phone was discharged to 0%, and then i cant turn on phone. When i plug it to charger, blue circle do not light. i try to do:
1. Hold POWER - phone starts but when display elephone logo (1 second) telefon turn off
2. Hold POWER and POWER + - phone gone to bootloader, and them whatever i choose (recovery, normal) phone starts but after shown elephone logo turns down (like 1.)
3. Flashed stock rom via Flash tool (format + download) - like 1.
4. I have unpluged battery
after all, phone cant start... Someone can help me?
I think you have to leave it charging for a while before you are able to turn it on again. Just give it some time
jman0 said:
I think you have to leave it charging for a while before you are able to turn it on again. Just give it some time
Click to expand...
Click to collapse
I charged it for 48h and i cant turn it on...
mczlowiek said:
I charged it for 48h and i cant turn it on...
Click to expand...
Click to collapse
Try another charger/usb cable, just in case the one you're using is defective, or charge the phone connected to a computer
jman0 said:
Try another charger/usb cable, just in case the one you're using is defective, or charge the phone connected to a computer
Click to expand...
Click to collapse
another charger/usb cable did not solve my problem. When i plug phone into computer, then computer recognize it. I flashed stock rom with flastool, but problem was the same.... I changed battery (buy new one) but problem is this same...
blimps
mczlowiek said:
another charger/usb cable did not solve my problem. When i plug phone into computer, then computer recognize it. I flashed stock rom with flastool, but problem was the same.... I changed battery (buy new one) but problem is this same...
Click to expand...
Click to collapse
Hi,
I have/had the same problem. The problems started, with the phone powering down, at half the battery level. Then I got a spanish battery overheating message. After the message appears, the problem starts.
I solved the problem like this :
First you have to completely drain your battery. How to do that ?
- Go to the boot-menu (press power on button, and volume up at the same time). Select : Fastboot. The phone will halt. BUT, keep your phone in that state, so it consumes energy. After a while your phone will go out. After that : go again to your boot menu, but DON'T select any options. After a period of ± 5 minutes your phone will go out.
- THEN : remove your SD-Card, and SIM-Card.
- THEN : Connect your phone with the net-usb-charger. DON'T connect it to your PC.
- After 1 to 2 hours of chargeing, your down center button, should start glowing blue again.
I got my phone working again 2 times using this method.
I hope it works for you.
Phone Restored with this method! Thanks pal!
worked for my phone
thank you very much