Related
I was wondering if anyone else was having the following issues with the new T-Mobile upgrade, and if anyone had any ideas on how to resolve them:
* The phone turns on sporadically when it is in my pocket. I think this normally happens when it tries to connect to GPRS
* The phone doesn't give me notification of my voice mail all the time
Thanks,
Dan
http://envoisolutions.com/people/dan
I'm seeing #1. In my case it looks like it's every time that the Inbox checks the email. Beta Version 4.00.16 didn't do this (so I might go back).
I had #2 occasionally even with PPC2002. Do you go in and out of coverage areas? This can cause problems, I think.
tmo never fails....
the ghost affect was an issue with the previous tmo betas...but it was not a prblm with att's latest rom
I have a different issue with my newly upgraded rom from tmo:
everything works fine
...except :shock:
wen i press the power button to turn the xda back on, it wont do anything at all
the button works to turn back light off, and to turn the unit off, but not back on
Im about to try with sum other Roms, but has any one eperienced this issue, or might know what might be causing it? (additional soft)?
Memory Leak
I have a memory leak that I can not trace. I have a cooked TMO .16 release radditionally running MS Voice, SharpDeck Sharp Vault, Pocket Streets, Cadenza mNotes.
I slowly but steadilt lose memory unitl I have none left and now have none left.
I am going back to the ATT version (but cooked)
Macudc
Upgrade
Says no connection w/ USB and won't go any further. Any suggestions?
Re: Upgrade
scottyjchef said:
Says no connection w/ USB and won't go any further. Any suggestions?
Click to expand...
Click to collapse
I had to restart my computer to solve this... Sometimes, you need to restart the XDA also.
MrDollyMaker
Upgraded Driver
If you allow the TMOBILE upgrade to install the new updates for you, it also installs a new driver in to your XDA that illiminates ALL upgrade problems from what I have seen.
MrDollyMaker
Upgrade
I have done a hard reset on the phone and I run into the problem when I first start the upgrade. It goes through an initial setup of "unpacking" and after that is when I get the error on the pc. The device connects fine with ActiveSync.
I'm having the turn back on issue, and also some times my text messages don't seem to come through.
I was thinking that maybe when it turns itself on, it's a text message trying to come through or something.
My texts end up coming through in a group!
yep, same here on the sms and missed calls...
i got voice mail, from 3 days ago, show up today!
and.. sms from midnight lastnight, came today at 5pm
although, i DID make fone calls this morning, so... the out of range thingie dont apply here..
also... i cant print to IR anymore!
I just upgraded with T-Mobile.16 ROM and Radio. The only bug im experiencing is when I receive a new sms, and I read it already, the notification of "1 unread SMS" on the Today panel won't go away.
I'm also having a hard time setting up my connection settings (MMS and GRPS) for the advanced section of the connection won;t show the proxy settings. Any1 who has a solution for this? I'm usign the mobile in the Philippines that's why I need to setup the proxy per connection and not per connection group.
Upgrade
Nevermind! I hate when it's something simple like disabling the antivirus on the pc. DUH!! :roll: I have yet to get any sms. Will keep watching :shock:
ntabikha said:
yep, same here on the sms and missed calls...
i got voice mail, from 3 days ago, show up today!
and.. sms from midnight lastnight, came today at 5pm
although, i DID make fone calls this morning, so... the out of range thingie dont apply here..
also... i cant print to IR anymore!
Click to expand...
Click to collapse
I am yet to received any errors like this. The only time I seem to have the XDA turn on is when the reception fringes and it hunts down better reception. It only takes a moment of poor reception to interfear with how it receives a message and than the system waits several hours sometimes to send it.
T-Mobile as with many other carriers like Verison and AT&T state to excpet up to 24 hours for SMS messages to get through to your phone.
MrDollyMaker
Re: tmo never fails....
JUICEe said:
the ghost affect was an issue with the previous tmo betas...but it was not a prblm with att's latest rom
I have a different issue with my newly upgraded rom from tmo:
everything works fine
...except :shock:
wen i press the power button to turn the xda back on, it wont do anything at all
the button works to turn back light off, and to turn the unit off, but not back on
Im about to try with sum other Roms, but has any one eperienced this issue, or might know what might be causing it? (additional soft)?
Click to expand...
Click to collapse
Yes, I had this issue today and I then unistalled the KSE TrueFax Trial (which I installed yesterday) and now the power button is working correctly again. The only way to power up the XDA was to do a soft-reset.
HTH...
i didnt think xda 1 had fax capabilities! atleast I couldnt get them to work, could u?
ntabikha said:
i got voice mail, from 3 days ago, show up today!
and.. sms from midnight lastnight, came today at 5pm
(
Click to expand...
Click to collapse
FYI, I had the same problems with the XDA-developers Special Edition ROM. I go into many building where I get no signal at all. My guess is that, if the SMS message fails, the T-Mobile network will retry it, but sometimes not for quite a long time.
Re: tmo never fails....
JUICEe said:
the ghost affect was an issue with the previous tmo betas...but it was not a prblm with att's latest rom
I have a different issue with my newly upgraded rom from tmo:
everything works fine
...except :shock:
wen i press the power button to turn the xda back on, it wont do anything at all
the button works to turn back light off, and to turn the unit off, but not back on
Im about to try with sum other Roms, but has any one eperienced this issue, or might know what might be causing it? (additional soft)?
Click to expand...
Click to collapse
I have a similar problem. When the device powers off automatically (after about 3min) I can't get it to come back on. Doing a soft reset actually makes it do a hard reset. Also, while it's in this "coma" state, I can receive a call and hear the person on the other end, but they only hear a ring and can't hear me.
T-mobile had no clue what to do... as usual.
The problem is one of the most annoying ones you can have: it appears only from time to time and you don't know when and even when it does you don't notice.
Simply my phone is not accessible for others even it shows full range and so on. The message "...the phone is switched off...". This problem occurs in as far as I remember 3 releases of ROMS (full, vanillas, etc). The radio ROM was also changed. I don't remember having such issue in early WM6 or in original 2005.
Since it's not related directly to any of the releases I post it as a new thread.
Now I have 3 options:
1. Downgrade to 2005
2. Throw the unit through the window, wait until end of contract and buy an iPhone
3. Try to fight with T-Mobile UK - which is not really an option since I just recovered from fighting with Orange for over a month
Does any of you experienced such problem?
Any known issues with downgrading to 2005 like ISPL required before flashing original ROM?
Any suggestions?
Adigital said:
...
Any known issues with downgrading to 2005 like ISPL required before flashing original ROM?
..
Click to expand...
Click to collapse
Well, I got the answer - couldn't wait and did the downgrade using original ROM. If anyone interested it went without problems. No ISPL needed. Connected, fired-up the exe file and worked OK.
I'll see how about the availability problem.
Ok, seems that it's only me having the conversation ;o)
I apologize for the thread location - it doesn't seem to be related strictly to WM6 anymore as I...
...installed WM5 and did some tests:
(I have voice mail switched off)
- Call waiting enabled = no calls allowed when GPRS active
- Call waiting disabled = no calls when transferring data (large file) but received when no transfer
- Used W660i SonyEricsson handset - could receive calls regardless of GPRS activity
Rang T-Mobile tech support where they told me that this is network feature that when internet connection is active no calls are allowed and since my voicemail is turned off all callers get message that my phone is switched off. In the light of GPRS specification and my tests this is a bull****.
Now I'm asking anyone on UK T-Mobile Web'n'Walk and who wants to help - please do such test. Just try to call your number from different phone when opening a web-page.
This is pretty important to me - I need internet on the move and don't want to get rid of my MDA.
Thanks in advance!
Hi there,
I'm on T-Mobile UK too and I ran some tests myself and found that you are absolutely correct. When you transfer data you cannot receive phone calls.
I've got an O2 device with me I can do some more tests on and I'll also try and borrow my Wife's Samsung and test that too. I'll post my findings here.
Cheers
Alex
ok, i've just tested this on an O2 3G device and there was no problem, next to try a none windows mobile t-mobile phone.
seems this problem has been around for while and on other networks.
http://www.freenfo.net/mobile/archive/index-t-64022.html
ok, final test and conclusion.
I tested the same o2 phone as above but in a NON 3g area (i.e. gprs only) and found the exact same issue.
conclusion: this seems to affect all types of phone and multiple networks but only when using gprs NOT 3g.
I'm suprised we havent heard more about this problem.
cheers
Alex
Thank you Alex very much for your help.
I did some research on the topic last night and found the same info as guys in the thread your linked. It must be that T-Mobile UK operates in NOM-2, which allows to suspend GPRS session only when no data is transferred. When packets are transmitted the device doesn't 'see' incoming calls as it's 'busy' with dealing with the packets. NOM-1 is 'able' to encapsulate information about incoming call into one of the packets and the device is notified about - so it can react, suspend the transmission and pick up the call.
The fact is that our MDA/Artemis uses Class B of GPRS which doesn't allow simultaneous CDA/GPRS at the same time. Even if it can suspend active data transfer it is the network that has to support that feature.
What I must notice is that I had lot more problems wiht this when I was using WM6. It seems that there were some packets transmitted by the system or something. I had my mail set to check servers every 15 mins at the beginning but lately ony once an hour or two. Other soft that could transmit anything was Weather module from SPB or Touch. Now when I'm on WM5 and was checking the issue during loading a page I was unavailable but as soon as a page was completely loaded my phone was accessible back.
My surprise is that if the 'issue' seems to be quite normal and there is nothing to do about it why I couldn't find any info about it here. Doesn't it affect anyone of our community?
I may be wrong with the WM6 expirience but still. If WM6 works fine in that respect it must have happened that someone missed a call when browsing the net.
i hadnt noticed to be honest
mugglesquop said:
i hadnt noticed to be honest
Click to expand...
Click to collapse
Did you try ringing your phone when it was loading a long page or downloading a file?
TBH I think I've noticed it just as much on WM6 as I did (or didn't) on WM5, I think I put these odd voice mails turning up down to weird WM issues! Now I know the truth though.
Obv. there isn't a lot we can do about this and I'm not prepared to turn off my Windows Live Mail or my direct push. I think we just have to wait until our contracts are up for renewal and get over to a 3G device - I'm liking the look of the Touch Cruise myself, or the Touch Dual if I want that keyboard back and by the time my contract is up I think they should be on T-Mob UK.
does the same thing happen in Edge areas or as that rolls out will the problem disappear?
I'm not sure about how EDGE works but the problem affects GPRS rather than 3G due to the fact that GPRS and the incoming call are submitted alongside each other and 3G is seperate. I don't think t-mob uk have edge running yet so I can't test, perhpas some else can test for us.
Bro.. My first 3rd party ROM is the Touch 3.0.. and yes.. my connnection did go off once a while (no bars as well).. that was kinda irritating. I have to go to connection manager and toggle my data connection or something like that, before my phone will get the GSM signal.
And yea.. the original WM5 and WM6 have no such issues.. I wonder if this is because of the new radio version..
i am a newbie of Vodafone (PH20B2),
Device Version is
Rom Version : 1.31.00 WWE
Rom Date 12/13/04
Radio Version : 1337.42
Extrom Version : 1.31.175 WWE
with Windows mobile 2003 Second Edition
the problem is that sometime i could not receive the call , the message occurs "unable to answer the call".
When i try to tab phone icon the message " The phone is not ready wait 15 seconds and try again" occurs .
anybody could help me what to do.
I am getting the same problem why is this?
I have a o2 xda IIs, i have installed WM6 Pro CE OS 5.2.1933 (Build 18533.0.7.0) Updated [30.11.2007]
i face the same problem, furthermore i realize when the battery is near 30% da phone becomes buggy in the sense dat messages stop getting sent and after soft resets da trouble is the network stops getting detected only after 5 minutes i see network signals,as soon as i hookup the phone with power the sms problem is immediately solved!
It may be helpful to note i have not installed any third party software and the phone has been hard reset only a few days ago!
Does the parite virus affect the phone? i installed parite infected .exe software through AS 4.5 and as a precaution hard resetted the phone following that!!
furthermore tapping answer doesnt work and the call automatically gets disconnected!!!
Try Upadating your ROM to Xplode's one. And yes one important thing , always keep your bluetooth on ( you may uncheck the beam option). This may solve your problem.
basharatwant said:
Try Upadating your ROM to Xplode's one. And yes one important thing , always keep your bluetooth on ( you may uncheck the beam option). This may solve your problem.
Click to expand...
Click to collapse
NO dont do that. it will drain your battery faster if bluetooth is on.
make sure it is OFF and also check the infrared (Beam).
You're battery might be failing to power up the phone module.
Try a new battery.
I've experienced some used battery.
Below 30% is very critical for ALL PocketPC operations, this is the point where some glitch tends to pop-up because the battery cant support
the power requirement of the hardware in which the software was using
(Ex. Phone, Camera, LCD, Speaker, Mic, Digitizer) thus, it fails bigtime or sometimes crashes.
Except if your battery is newer where the 30% which steadily and accurately give power to our BA.
And make sure you terminate all your programs if you've finished using it, if it is running it might affect the power consumption because it is still present in the memory.
anyone can sync without using original cradle or bluetooth? i m having problems with non-ori cables..on usb port.. help pls!!!
plusdesign_np said:
i am a newbie of Vodafone (PH20B2),
Device Version is
Rom Version : 1.31.00 WWE
Rom Date 12/13/04
Radio Version : 1337.42
Extrom Version : 1.31.175 WWE
with Windows mobile 2003 Second Edition
the problem is that sometime i could not receive the call , the message occurs "unable to answer the call".
When i try to tab phone icon the message " The phone is not ready wait 15 seconds and try again" occurs .
anybody could help me what to do.
Click to expand...
Click to collapse
Does this happens right after powering on ?
It is normal to take a long time to boot up the SIM Cards configuration and specially SIM contacts onto the phone's memory.
JP
OMG i realize after 35% my phone starts getting buggy, messages dont get sent :s phone hangs and has to be reset :O...can anyone tell me if a new battery for a blue angel is a good idea? and furthermore I am willing to invest in a new battery can anyone send me links for a cheap O2 XDA IIS battery which will last rigorous use? can anyone verify stability issues after 30%?
The phone is not ready. Wait 15 secondsd and try again. !!!
And can't open Options for the phone and not able to send SMS.
Using:
WM6 5.2.1938 (Build 18538.0.7.0.PV.HAT)Touch & Office 6.1 NetCF 3.5
Radio 1.12
Trying reflashing and also with another PV WM6 2000 and trying to send SMS immidiately after reflashing but no luck! Though it worked in the first days of switching to WM6.
Could it be the Radio 1.12 version problem?
Thanks for helping!
Ok see if you SIM is perfectly making contact. I had the same problem. I did put some bit of paper on the over the SIM . So that after closing the back cover it fitted snuglly to its slot.
basharatwant said:
Ok see if you SIM is perfectly making contact. I had the same problem. I did put some bit of paper on the over the SIM . So that after closing the back cover it fitted snuglly to its slot.
Click to expand...
Click to collapse
I can receive SMS but not send them out!
And the phone is working though the Phone Options says the same thing about waitinf for 15 seconds and cannot be opened at all!
Thanks for your kind reply.
surely the battery keep it powered by da charger and den try
or try a new battery like i said in the 5th post of this thread.
SilverSamurai said:
or try a new battery like i said in the 5th post of this thread.
Click to expand...
Click to collapse
I did charge the battery and while in the cradle the phone Options and sending out SMS says the same thing about waiting for 15 seconds.
But the phone itself works with incoming and outgoing calls and I can receive the SMS !!!
Using:
WM6 5.2.1938 (Build 18538.0.7.0.PV.HAT)Touch & Office 6.1 NetCF 3.5
Radio 1.12
Could it be the Radio 1.12 version problem?
Thanks for helping!
try to upgrade your radio. i have 1.15. then let us see what happens.
SilverSamurai said:
try to upgrade your radio. i have 1.15. then let us see what happens.
Click to expand...
Click to collapse
Which upgrading method of the 2 that are described in the XDA Wiki?
Last time I tried both it seems it didn't work for me.
One says that is just Radio updating and the other the whole WM operating system?
Kind Regards
www.myspace.cn/taijiyoga
Just try the radio updating only. The one in the wiki is good.
or copy the radio.nbf to where nk.nbf is. then flash both only if you want.
if you just want the radio. delete the nk.nbf.
then launch MAUpgradeUT_NoID.exe
I had a very same problem.
The problem was solved by buying a new battery.
At least for me, the only problem was the battery. Now everything is going fine...
Yup. Mostly, but not all, problems are battery related. our BA's really a powermonger when it comes to eating battery mAh
so the most common advice for a hardware failure or such is a change of battery.
note: even our desktop PC's malfunction if it is running undervolt.
Hello,
i am facing some problems with my Hermes and I really don't know what is going on, the problems is that, although it shows that is connected to the telephone network, if somebody calls me it doesn't ring and is not responding. At that time that is not responding if i try to call the phone screen shows that is dialing but it is not, if i click the "End call" it doesn't end until it times out, after that it is not responding again and it needs a reset. After the reset it's working again until the next time that will crash.
I am using Schap's 4.31 rom with 1.54.30.10 radio
What do you suggest that i should do?
I got the same problem with older Schap's ROMs. When I flashed to K's or anything else (not based on Schap's) the problem disappeared.
I had the same exact issue, my solution to this issue was to replace the radio with 1.47.30.10. It has been 5 days without any issue. I hope that helps.
you just changed the radio? or the windows rom also?
I've had this issue on my Hermes, although it was evident on WM5, which is one of the reasons I upgraded to WM6, which alas just created other problems
http://forum.xda-developers.com/showthread.php?t=355823
Elwyn M3100 said:
I've had this issue on my Hermes, although it was evident on WM5, which is one of the reasons I upgraded to WM6, which alas just created other problems
http://forum.xda-developers.com/showthread.php?t=355823
Click to expand...
Click to collapse
nah i don't think i will downgrade to WM5, maybe i will try another rom.
also the battery doesn't last long, maybe 3 hours, i don't know why is that, and maybe that is what is causing the problem.
I just downloaded the radio from this link http://www.parkingdenied.com/filebrowser/Hermes/Radio+Roms
If I was you, I will try Radio down-grade first.
Good luck
When the phone freezes on the "dialing..." screen it is cuz the phone lost its network connection (although it wont show it). U can remedy this by turning the "phone" part (not the whole device) off then on again, so it will reconnect to the network.
Also, some radios are very power draining. Try check here for feedback on different radios.
Basically, there is a good chance all this messin u up is ur radio
Recurring 8525 problem since upgrading to WM6 ROM (AT&T version). The phone will freeze completely (clock doesn't advance, screen and buttons and keyboard don't accept input, display freezes at on or off). When restarted by soft reset, the phone will frequently come back up with no GSM. When that happens, sometimes if I remove the battery and leave the phone off for a few hours then GSM will come back and will work for a while and then lock up again.
When it comes back with GSM service all of the network logon info for GPRS, my Wi-Fi networks with their auth info is gone.
Also email accounts are gone from the account picker and can't be re-created with the same names even though they have completely disappeared. I assume the settings are still in the registry but accounts just aren't showing. One account still shows on the Today screen, but isn't in the account picker.
A hard reset "fixes" things for a while. I've experimented with only installing a few of the most necessary 3rd party apps, without finding any "smoking gun" program that's causing problems. I've also re-seated the SIM card multiple times. I'm thinking it might be a hardware problem.
Today I flashed the radio to 1.54 and it has worked for a couple of hours without needing to be reset.
I'd be interested to hear what possible diagnostic paths I should look at before I call AT&T and begin the rigmarole required by tech support. Anyone with a very similar situation?
Thanks in advance.
I'm having the same problem. I was thinking of going to AT&T to get a new SIM, thinking that was the problem. Any solution yet?
-Pete
I started having the same problem with mine last week.
Sometimes it locks up, sometimes it gets stuck at the windows logo durring boot, always displays no gsm rom on boot.
Take a look at the how to unbrick thread. no gsm rom msg is one of the types of brick.
I installed hard spl ( already had it actually ). Flashed os, but it didn't help. Flashed GSM and no gsm msg went away. The phone is still acting strangely.
remember, just because the rom came from your carrier DOESNT mean that it doesnt have problems. Alot of people seem to have problems with upgraded rom versions from their carrier and end up either downgrading to previous rom or flashing cooked roms. try the previous rom or another cooked rom and see if that fixes the problem before blaming the hardware. It will save you a major headache trying to troubleshoot something that is working perfectly....
Please remember to do a bit of reading and hard spl your device before going off and bricking your Hermes. 10 minutes of reading might prevent hours, days or weeks of hair pulling, nail biting insanity to find the answer. Cheers.
hello people,
I have my SVP M3100, original from orange spain - but CID unlock to work with portuguese carrier, now I live and work in Hereford UK, and I use a sim from Three and other from Lebara the three sim is to have net on my pc and the lebara sim is to make low cost international call, and i switch many times the sim's to make calls and to have internet, now i have the same problem that you have, i try to upload the HTC original rom that have IPL. BOOTLOADER, SPLASH SCREENS EXTROM GSM, but lock at 12% I try upload ongly radio rom and the same a think that somekind of hardware problem caused by to many sims switch, if any body have one solution please tell me
Sometimes it locks up, sometimes it gets stuck at the windows logo durring boot, always displays no gsm rom on boot."
Same thing happened to me. Tried to reflash original ATT ROM , Radio Only, OS only. Gonna send it for the repair. Phone is not under warranty anymore hope that the price of repair will be less than price of new phone.
BTW, is there any way to remove Hard SPL from the phone?
how much was the price of repair?
Try changing you radio to a new one. i have had the same problems in the past with different radio roms and rom versions. so i am using radio 1.54.30.10 with pdavet roms and have had no isuue.
Ray_jai said:
how much was the price of repair?
Click to expand...
Click to collapse
Got my phone back fixed. They charged me for shipping only $19
only $19!?
What if I don't have ATT anymore?
do you know?
i had the same issue check for my previous posts i think no GSM is a common error there is method flashing himalaya rom on hermes to erase GSM sector.
if you cant find the link PM me .
i hope it solves your problem.
tracylynnt said:
Recurring 8525 problem since upgrading to WM6 ROM (AT&T version). The phone will freeze completely (clock doesn't advance, screen and buttons and keyboard don't accept input, display freezes at on or off). When restarted by soft reset, the phone will frequently come back up with no GSM. When that happens, sometimes if I remove the battery and leave the phone off for a few hours then GSM will come back and will work for a while and then lock up again.
When it comes back with GSM service all of the network logon info for GPRS, my Wi-Fi networks with their auth info is gone.
Also email accounts are gone from the account picker and can't be re-created with the same names even though they have completely disappeared. I assume the settings are still in the registry but accounts just aren't showing. One account still shows on the Today screen, but isn't in the account picker.
A hard reset "fixes" things for a while. I've experimented with only installing a few of the most necessary 3rd party apps, without finding any "smoking gun" program that's causing problems. I've also re-seated the SIM card multiple times. I'm thinking it might be a hardware problem.
Today I flashed the radio to 1.54 and it has worked for a couple of hours without needing to be reset.
I'd be interested to hear what possible diagnostic paths I should look at before I call AT&T and begin the rigmarole required by tech support. Anyone with a very similar situation?
Thanks in advance.
Click to expand...
Click to collapse
I've got exact the same symtoms. No GSM, network and auth settings gone, opera registration lost etc. It started a few days a go, in the beginning I had a working GSM most of the time, but it became less and less and now it doesn't have service at all anymore.
Currently device information shows:
ROM version: K's Rom v1.21
ROM date: 10/03/07
Radio version: NONE
Protocol version: NONE
Model No.: HERM300
IMEI: <empty>
Does anyone know a permanent solution?
I have the SAME PROBLEM!
I was about to get radio to work 3 days ago, and now the radio says none.
it's like the radio removed itself.
ok this doesn't make sense, I used the hima rom to remove the radio.
and now the radio is back! wtf?
Hm I tried everything but I can't seem to reflash the radio. About every version I try hangs at 0%. Sometimes when I flash from SD card it hangs at arount 10%.
Tried different SPL versions as well
Damn you radio!!!
BTW, I have no idea what they did to my phone there, but after returning from the AT&T Repair center the Call timer was zeroed and Device ID is now different from what it was before in Skyscape software
Any solutions yet? Im having the same issues.
The reason why Active Sync restarts
For many people the Workaround "not a hack or registry at all" does not work is because of a event based notification that runs the program anytime the time changes. Since your phone updates from the cell tower, it updates the time alot even if by mere seconds well this update runs activesync. Get yourself MemMaid
run it in advanced mode then Jump to Databases then select Notification Queue you will see a list of 3 types of Queues; Time Based, Classic Time Based, and Event based. Go to the event based queue, you should see at the end of this list 3 listing for repllog.exe with the active sync icon. Click on them individualy and read what shows up in the window below put a check mark next to the listing that describes the event as "apprunaftertimechange" it is normaly the last one on list
Also make sure there is no repllog.exe listed in any other queue for a time based event. Leave the other instances of repllog.exe since you still want your device to sync when its connected to the computer. Once you select all events that desribe running repllog.exe after a time change or at a certian time and date press the delete button.
This worked for me on my 8125 and the tilt and if i would of figured this out before i had ATT replace my 8525 i probably would of not got the tilt but lol they gave me tilt free cause all the problems i had with 8525.
let me know if this works for you guys that still see activesync running after the fake server WORKAROUND.
This should work
memmaid is not free but i think its free to try and if all you do with it is fix this problem then great or find a way to register it cause it does help has cool tricks and tweaks
Wow, still no real fixes for this problem, bummer
running memmaid work
running memmaid works and fixes the random start of activesync and once the random start of activesync is fixed the device will not lock up because of activesync this not to say if some other program you may have installed locking you up as well