Develop Bugs

Please help me make my QTEK 9000 faster :)

Hello,
I'm a first timer here ;-) I've bought a QTEK 9000 some days ago and I've tested it a lot these last days. I'm not really satisfied
I find that it's really slow. For example when I'm surfing in Internet explorer and chatting on MSN at the same time, it takes a few seconds for answering to a friend on msn and then go back to Internet Explorer.. It's really annoying
Currently I have this version :
R 1.03.00
G 42.36.P8
D 1.13.72 FRE
Is there a better version, faster ? In french ?
I'm not against english rom if you say it will run faster As long as I can set up my french orange 3G account on it.
One more thing : It's my first PDA and I don't know how to flash a rom, make backups, ... and so on. I'm a newbie, so if you can give me a "how to" you'll be welcome
Thank you guys (and girls ;-)

dont think its a phone problem, you are internetting on gprs and using msn. gprs is a very slow link for communication like a 40 kb/s modem. when you are using umts its faster like adsl 350 kb/s
good luck

Not really
Hello,
Nope I'm connected in UMTS. The connection is not slow. It's the qtek 9000 itself.
Maybe I shall try to install last radio version ?

Install the last i-Mate Rom !

sorry, you mean the swapping is slow. i didn't read correctly
i use the imate rom and the screen rotating is much faster. for the swapping between internet and msn can't i say much.
you can always upgrade rom ad radio . in the i mate rom English is already with radio 1.09 and I think is working nice
be carefull upgrading and read the info on it
direct usb connection to the pc (no hub) remove sd card and sim card etc.
goodluck

ok I'll try to do it. I'm reading the forum. Will my connection with orange (france) still work with this english Rom ?
But I don't want to make a mistake ;-)

Save your GPRS/3G/MMS configuration

i dont think the rom is provider depended
you only have to use the right settings for YOUR provider
qtek has a tool to install the right provider but its for The Netherlands (orange is also in the list)

Hi, I couldn't help notice your rom version below for the Qtek 9000. Is it cooked? Did Qtek issue a new rom for Qtek 9000 like all the other carriers?
Best,
Gilbert

nope upgraded it with the imate rom
its here in xda forum. working better and faster then the original rom

I've upraded my qtek9000 with Radio 1.09 and Rom Jasjar 1.30.76 WWE.
I've also activated the turbo mode.
It goes really faster now !! It's like having a new pda ;-)

How will the "turbo mode" activated? Don't find it anywhere.

kkempe said:
How will the "turbo mode" activated? Don't find it anywhere.
Click to expand...
Click to collapse
It can be found here : http://forum.xda-developers.com/search.php
or if you are really pressed for time, check this out too: http://forum.xda-developers.com/viewtopic.php?t=39099&highlight=turbo+mode
here's another post from a different site: http://www.mdapro.co.uk/phpBB-2.0.18/phpBB2/viewtopic.php?t=37&highlight=turbo

Need Advice on Upgrading Plz help :)

Greetings! I am new here and I recently bought an xda exec here in china. Problem is, the exec was loaded with a chinese rom because it was intended for chinese users so i asked the seller to make it in english. It seemed they had a problem with changing the rom, Im not really sure coz i cant understand half of what theyre saying. After a long wait, I was given an exec with a dopod rom.
Now having a different rom from the supposed manufacturer's one, it seems my unit has a few errors, for example im frequently having a sddaemon (which i found out has something to do with the contacts list) and sddialer (which i think has something to do with voice dialing) errors. Another thing I have a problem with is, the boot screen, since it was loaded with a dopod rom, it says "dopod enjoy mobility" at the boot screen. I feel kinda uneasy with it, simply put, i dont like it.
Also, I think my problems would be solved by flashing a different rom, but im not sure what to use tho. Actually, I want to use a 'proper' o2 rom because i like to have the boot screen back to o2. Yet, it seems everyone is suggesting the JasJar rom, do you think i should use the JasJar rom? If so, How can i change the boot screen to the o2 one?
For anyone who can help, Advice on how to address my problems is very much appreciated. I tried searching the forums but i cant seem to get how the search function working. I humbly ask guidance and advice to my problems and a proper redirection is highly appreciated. thanks in advance!

also..
Also, I'm also considering upgrading to WM6. Is it advisable to upgrade to WM6?

WM6 has a better looking than WM5, and most of the software are newer.
If you want stable, you can use WM5, most of the new ROM are all for the WM6, I am also a user in China, I am now using WM6 with a chinese language supporting package.

How unstable is wm6? Does wm6 have features or anything to offset the instability?
@XingYun: are you using an english rom with chinese text support or is your rom purely chinese? Im thinking of copying your setup, would you advise it?
BTW, my Device information says the ff:
ROM version: 1.30.111 WWE
ROM date: 04/06/06
Radio Version: 1.04.02
Protocol Version: 42.37.P8
ExtROM version: 1.13.188 WWE
Any more help and advice is very welcome

Later builds of WM6 for Universal isn't really unstable. It's actually better. There's only one problem. NO VIDEO CALL.
You can get the latest WM5 ROM here:
http://forum.xda-developers.com/showthread.php?t=286036
You can get the latest WM6 Crossbow ROM here:
http://forum.xda-developers.com/showthread.php?t=303685
Use the Search facility... It really helps.

Ok, ive decided to upgrade to wm6. Since I want to have an o2 boot screen, should i use the o2 rom from the jwright link? Will it be compatible with my unit even tho I am running a dopod rom? All I need to do is follow the directions from the wiki :
http://wiki.xda-developers.com/inde...tion On How To Upgrade with Bootloader method
Am I correct? Sorry for sounding like a n00b, but I'm quite scared of making a mistake, so I want to be extra sure and extra careful. Advice and help is appreciated. thx.

I am using a English ROM with Chinese language support, and YouYuan text format, my machine infomation is like this:
ROM version: 2.05.00 WWE
ROM date: 04/09/07
Radio version:1.15.00
This is the ROM I am using:
http://forum.xda-developers.com/showthread.php?t=305512

Finally upgraded with Jwright wm6 rom, works fine now, thx everyone.

Hi, HProvider
Could you tell me where did you find the chinese language support package?
Mine does not work well with the Jwright ROM.
Thanks!

Downgrade Artemis back to WM5

Hello to all
i've tried different WM6 Roms but i'm noct convinced to use it yet.
That's why i'm trying to find a way to downgrade to WM5.
I know that there are several how-tos but none worked yet.
I already tried the opposite way via uspl to downgrade. no success yet.
WM5 Rom is here, when trying to downgrade i get the error message 260 which means no connection to the device. i'm using the same machine for downgrading as for upgrading, nothing but the Rom on the phone has changed.
Currently i'm using the o2-xda-orbit german rom.
If anybody has a clue what to do to get the old stuff back, thx in advance
blue

You can downgrade your O2 Orbit successfully if you have Original German ROM (WM5) which is available somewhere in this forum. I can't remember which thread but if you do some search I am sure that you will find it.

I have just found Original German O2 Orbit ROM here : ftp://xda:[email protected]/Uploads/Upload/Official XDA Orbit ROM

Thank you for your answers!
I own a HTC P3300 Artemis.
Using USPL and the original o2 german wm6 rom i flashed it with WM6.
I already downloaded a german wm5 rom, my problem right now is that i cannot by any unknown circumstances get this rom on my phone.
No matter whether i use uspl before trying to flash the original rom or if i don't use uspl the result remains the same.
The update utility keeps telling me that it is not possible to connect to my smartphone.
Active Sync/ Mobile devices center connection is working fine though.
Greets blue

You can try with this Original HTC Artemis WM5 ROM here : http://rapidshare.com/files/19322112/HTC_1.12.405.01_026790_WWE_SHIP.rar
Let us know if this help you.

Thy to all, i made it!
Main problem seemed to be my os!
even though i already flashed using vista as os this time it didn't work out.
I used my other computer running xp and it worked on the first run!
greets blue

... hear that
i recognize that problem... even though i always sync with my laptop (Vista) i use another com (XP) to flash..
Don´t know why but it seems alot have experienced this prob.

I have bought a htc3300 from a dealer that i find at skroutz but after 1 day i had lost the 2nd language keyboard so i took it back to the dealer to fix the problem he said that wm6 is free to upgrade so let passed it but he put the touch htc software that don't work good how can i downgrade to wm5 again please help it's only 2 days mobile !!!!

well after many pockets of tobaccos i fix it with the Original HTC Artemis WM5 ROM here : http://rapidshare.com/files/19322112...0_WWE_SHIP.rar thanxs very much it finds the image version of htc touch and make a downgrade that was that the upsl cannot do ,the upls reload the same version that had before maybe because it didn't know the previus

Humm??
The UPLS is not a ROM??
When you run UPLS it sets the CID registration, so you can flash any ROM you want - but offcouse you still have to get the ROM

you 're right after upsl you can downgrade or upgrade... many tnx for info...

HTC P3300
can´t dowgrade wm6 to wm5 after 2 percent it return with a error
ERROR [244] : INVALID MODEL ID
rom image HTC_1.12.405.01_026790_WWE_SHIP.rar
help
++++++++++help++++++++++

For French User, i'd Upload an Official Operator Orange Version here :
ftp://xda:[email protected], Original ROM Fr) pour M650_0407.rar
Direct Download here :
http://www.mobilite.fr.orange-business.com/public/oev4/html/fr/pme/mobiles/ba/dl.php?mi=164&pi=2580

Reccommended WM6 version for iPaq hx2495b

I love my iPaq to death. I really do. But I want to stab Windows Moblie 5 in the eye IN THE EYE. Particularly since I have version 1.0.1. Can some kind folks recommend me the version/custom-build of WM6 that works best with the hx2xxx or even better the hx24xxb? I am eternally in your debt for saving me from the monster that is WM5.
Sincerely,
GK

Hello? Anyone?

check my website out, http://wm6.flyingarizona.net

Alright, I'm running into problems. I can hard-reset just fine, but when I try to get into the white bootloader, I just get a white screen, no USB anything. I've tried both 1.02.00 h and 1.00.00 h. Both do the same thing. Also, when I try to flash to the WM6 rom, I get an Invalid SKU error... I realize you guys are all very busy and tired of the WM6 problems, but could someone PLEASE help me?

Read this thread:
http://forum.xda-developers.com/showthread.php?t=329079
I think you will find all the answers

dpdurst, I have check your website, and notice that the ROM is for Hx2750, I have an iPAQ hx2495b with 192 mb ROM. Do you think if it will work for me?
Thanks

The roms for hx2000 series work and your device. And I think that the procedure is the same or very similar like for hx2490b, and for this reason I suggest the thread at my above post.

Hi dancer_69, I have just yesterday upgrade my hx2495b to WM6 using dpdurst ROM. But I have a question, why I cannot user messenger?

Just download an updated version, I think you can find it here in the forum. Use search

How to downgrade wm6 to wm5 (P525)

Hello,
I installed wm6 to my p525 and now I have to downgrade it to wm5. But i can't install wm5 rom to it. How can I do this? Please help me

do you speak french because i can help you but i'm french so it's most easy for me to explain in french!

you can directly use .nb0 rom .it can let you go back to wm5.dont use .cap its dangerous and cant work.but you boot will keep 07.....

louco21 said:
do you speak french because i can help you but i'm french so it's most easy for me to explain in french!
Click to expand...
Click to collapse
I don't know french. But I can translate it Please tell me how i can do this

Do a search on my posts. I posted this before.

Hi guys
have a P525, originally purchased in UAE(English).
have sucessfully flashed to various WM6 Mobiz roms, v10, 18, 19 etc
now want to revert back to WM5, as PIM does not transfer, etc and many other programs (from WM5 ) do not work in WM6 environement.
Baut cannot revert back to WM5.
- downloaded various ASUS WM5 ROM, WWE, WWE ARA all versions 3.43 etc
- have tried using both bootloaders 06xxxxx and 07xxxxx
- with any official ASUS ROM, always get the following error
ROM image found :\MiniSD Card \Galaxy.cap
Language(English), is compatable with the device language(Unassigned).
then click System- Rom update , and imiditaely get the error:
ROM update cannot be applied to this regions version!
- i have also tried the ASUS.UnlockLangID ( runing this before attempting above update), but no difference, same error.
- i have also tried changing the local in system properties, to English, Arabic, Thai and reatempt falshing with ASUS WM5 roms but always get same error message as above.
PLEASE HELP
were can get .nb0 WM5 ROMs please?
Any other assitance would be apreciated, thanks guys
thanks