Develop Bugs

WICH rom FOR my MAYLASIAN O2 XDA 2?

i tried with 1,72.187 for uk users,,,but i got a country id error code....
where's the ones designed for my pda?

i tried with 1,72.187 for uk users,,,but i got a country id error code....
where's the ones designed for my pda?
Mmm.. you left quite far behind. But it is not too late. I suggess you to upgrade with o2 Uk ROM like you did, but before doing this, "cook" them first, like what i did. I'm from Indonesia,. yes we are neighborhood.
here some guidance. (execuse me Zero... .. (i put this form one of his posting)
1. study this http://forum.xda-developers.com/viewtopic.php?t=12101 by read them carefuly, BUT do not upgrade your's now.Continue to the next step
2. study this http://forum.xda-developers.com/viewtopic.php?t=12547 until finish, my stupid question there will help you much... thanks again Zero... you are the best
3. From this guidance, You can update yours without error country ID and not losing your "auto config". the last is the easiest way to activate your GPRS. Yes, Asian Phone Provider, like mine.
4. Have a nice New ROM

check the next link
check the next link
http://forum.xda-developers.com/viewtopic.php?t=12101

Vodafone Rom

Hi
Is there a UK vodafone ROM for the BA. My provider is vodafone and it would nice to have the correct settingd for my BA, instead of usinf the T-Mobile rom.
Thanks
Lordao

Someone (not me) dumped the ROM here: ftp://ftp.xda-developers.com/Uploads/Blueangel/Vodafone_VPx_1.22.nb1
Read the wiki http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel for details of how to use this file.
Hope this helps!

hi
Thanks for that, but i don't seem to have permissions to get into that directory.
Regards
Lordao

hi
i got the rom, the extension is different to what i expected, do i have to use a different loader for this, as changing the extension from nb1 to nbf did not work.
Thanks
Lordao

Look at this first..
Hi Lordeo..
Do youself a favour.. Look at this..
http://wiki.xda-developers.com/index.php?pagename=BA_GettingStarted
After, have a quick look at this..
http://wiki.xda-developers.com/index.php?pagename=BA_Versions
As you can see, there's no direct UK Vodafone ROM available however, you can look at upgrading your Rom to the highest here..
http://wiki.xda-developers.com/index.php?pagename=BA_1.42.00_Upgrade
Then applying the UK Vodafone MMS, GPRS and SMS settings from a post I authored a while ago by clicking here..
http://forum.xda-developers.com/viewtopic.php?t=32437
Ok, the downside here is that you'll have what is essentally a T-Mobile branded phone..
Lastly, there's always the option of upgrading to WM5.. See here..
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM5_Home
If you do decide to go ahead with this, please read part of a post I authored a couple of days ago.. It states..
General Tips to you (and others)..
If you do want to update or upgrade then make sure you read everything through first.. Make sure you're happy in doing it.. Perhaps use the search function to read through others comments.. I would also recommend reading others comments about trying to downgrade from WM5 to WM2003SE to see what others have encountered
You will not believe the amount of people who end up posting questions when they've not followed the instructions from Wiki that I've pasted for you here..
Finally, if you are stuck, use the search command and describe your problem in the Keywords section, select Blue Angel from the Category and read through the posts relating to it before posting questions..
I think that's everything..?
Goodnight!

Restoring ROM dump
Take a look at this thread: http://en.pdamobiz.com/en/forum/forum_posts.asp?TID=151&PN=1 at the end of the first posting there is a brief section entitled How to Restore. Copy the .nb1 file onto an SD card and follow the instructions in the post to restore. Good luck!

thanks for all the info.
for some reason the rom backup file would not automatically install from the SD. oh well. i went to wm5 very nice but i can not get my gps to pair correctly with bluetooth, back to the t-mobile rom at least tom tom works with 2003 correctly
Lordao

wm6 for tmob vario2 uk... which version should I use and how?

Hi guys, I am a serial lurker here for several years.. and finally decided to upgrade my vario 2 to shiny wm6. I have downloaded black 2.5 and wanted to find out it all works great and how to install....
i haven't made any other changes to my vario 2 so want to get this right first time!

I think you need to lurk (and read) a bit longer, this same question has already been asked today!

lol, I read that which sparked an interest in upgrading...
What I wanted to know was which was the "best version" to install and what was the best procedure to follow for tmob uk.. I have seen plenty that mention the usa networks but no instructions specifically for tmob..
I know that a lot of you guys have already done it, so I just wanted to pull at your experience and get a good safe method!!!

Put on the fire proof suit quickly my friend, I think it will get very hot very shortly.
Check the WIKI, look for custom rom upgrading and follow MrVanx's idiot proof guides.
Black 2.5 has a UK TMob version as well. The thread is fairly obvious.....

great thanks for the advice....
I will look for it.... would be handy to have a direct url for any other tmob users that come across this post...

I used vanx
I used vanx's update method to install the hard spl, and now my phone is stuck on the 4 colours and won't go any further......
Can anyone help?

His guide also has a what to do if things go wrong section IIRC?
Also, read all 74 pages of this thread:
http://forum.xda-developers.com/showthread.php?t=296722

phew I was lucky, I only needed to reset as it was stuck in bootloader. however when I try to instal hard spl it gives me a request to run enterbl.exe which when I run it, resets the device immediately into a boot loader screen (the colors) and doens't update the firmware...

Have you got all the necessary .net framework stuff installed?
Presume you are using XP not Vista.

i'm still using black 2 but will be upgrading to black 2.5 over the next few days when i have time. I'm also on t-mobile uk and although i havn't tried either the standard black2.5 or the t-mobile one, it'll be the standard version I install as i'd rather keep my phone clean from any t-mobile stuff. Thats just me though.

.net framework? I have looked all over and can't see any reference to it.. can you clarify??
edit:sorry am runnig latest 2.0 version

troyDoogle7 said:
.net framework? I have looked all over and can't see any reference to it.. can you clarify??
Click to expand...
Click to collapse
You need .net framework 2. If you havent got it, download from microsoft. You should read MrVanx guide

You will need to wait for one of the gurus to look in then I am afraid - I followed the guide and it all worked for me.....

T-Mobile - UK W'n'W
I've bitten the button and upgraded both my rom and radio and so far so good

Check this thread, it helped me when I was stuck on bootloader:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick

thanks for the message, however I am back in the os... I think it must be some type of software lock.... does t-mob application lock their devices?

Hi, dont know about t-mobile, but I know Orange uk lock their's. However I followed Mr Vanx's excellent guide on the hermes wiki & have flashed a few times with no problems so far. Currently running Black 2.5 (excellent), with no issues.

I use
t-mob and hermes adn black 2.5. Absolutely great.
haven't bothered with the specific t-mobile flavoured rom, but downloaded a cab file which you won't need which oads the settings for mms and other such "treats" like that.
Have used black since 1.0 and think it's great, and continues to get better.

Australian 3 Extended ROM

for those who are interested I have uploaded the Australian 3 extended rom for installation after WM6 installation, plus the cab file for set up of other networks- Dopod D810 only.
http://rapidshare.com/files/38093805/Aust_3_ext_rom.rar
http://rapidshare.com/files/38094297/CWW_Enterprises_AUS_Operator_Con.cab
enjoy!

Does this ETX rom have all the things in it required to use planet 3, stream video, use X-series etc?
Just wanted to say thanks for this!

MontAlbert,
Did you manage to upgrade to WM6 successfully? If so, can you tell me details...are you with 3 Aus? Do i need to first unlock my phone?

can someone host the file on something other than rapidshare, i cant download it for some reason.

zeu569 said:
MontAlbert,
Did you manage to upgrade to WM6 successfully? If so, can you tell me details...are you with 3 Aus? Do i need to first unlock my phone?
Click to expand...
Click to collapse
you need to unlock the extended rom but that is already unlocked on WM6 versions- i have LVSW wm6 rom installed and it works great.
i will try and upload it somewhere else.....

Silly question but how do you install it?
Hi I have downloaded it and all is well and really it looks like all I need to do is
install the cabs one by one ----- but that ain't right is it?
As Paulene Hanson would say ----- Please Explain

stick them in the extended rom and install from there.

Little foggy on the terminology sorry
MontAlbert said:
stick them in the extended rom and install from there.
Click to expand...
Click to collapse
Hi Thanks for the reply please go easy on my noobness but I am not sure by what you mean??
I mean I extracted the extended rom and went in and excecuted the file in that folder --- I then get a question asking me on my trinity if I want to allow a program (enterbootloader.exe) to execute and then it drops out and the flash screen comes up on the trinity but the flash program on the computer says it has an error comunicating with the device and only finishes with the exit option - however no flash takes place
I get the same with the ax3l rom can anyone help? I think i'm missing some basic ideas here
Maybe i should start a new thread --- but any help would be great

I've uploaded the files to my blog. You can get to them from here:
http://www.webdevblog.net/2007/06/26/windows-mobile-6-setting-for-3-australia-dopod-d810/
Hope this is ok MontAlbert?
Enjoy!

bump please
sorry but i'm still unable to use these files .....I don't want to be a pain but can someone help a fellow ozzie out

andytof47 said:
sorry but i'm still unable to use these files .....I don't want to be a pain but can someone help a fellow ozzie out
Click to expand...
Click to collapse
Sorry, I haven't looked at how to actually use it, just figured I would host it to save people trying to get it off rapidshare.
I haven't upgraded to WM6 as yet (hoping the official release will be soon so I don't void my warranty).

grahamrb said:
Sorry, I haven't looked at how to actually use it, just figured I would host it to save people trying to get it off rapidshare.
I haven't upgraded to WM6 as yet (hoping the official release will be soon so I don't void my warranty).
Click to expand...
Click to collapse
hehe- keep waiting mate- gave up waiting a month or 2 ago and am so glad i did. i figure if anything goes wrong with it i will flash it back to the old rom. I am now using Ax3l's ROM and its great.
to make the files work just click on them and they will install each relevant piece of information.

MontAlbert said:
to make the files work just click on them and they will install each relevant piece of information.
Click to expand...
Click to collapse
Copy the "CWW Enterprises AUS Operator Con" file onto the pda and then run it.
What do you do with the rar file - "Aust 3 ext rom"?? Unzip it and transfer the contents onto the pda (12 odd cab files)?? And what about the exe files in there and the ExtROM.rar file (also in the Aust 3 ext rom rar file).
Thanks for any info you can provide.
Graham
EDIT: Just saw this post by you, now I see where you got all those files from, I just don't know what to do with them now I guess:
http://forum.xda-developers.com/showthread.php?t=307275

I need to check out my 3 on my 3 phone ---- help
Hi I am just wondering something, I have the cab files and am playing around with them, but I really only want one thing from them, and that is the access to my 3 ------ everyone with 3 Australia knows what i'm talking about--- anyway, I am using LSVW windows rom and it nice -- much nicer than the default that came with my dopod/trinity --- but I can't check my account now because the icon is gone -- obviously
but I am guessing it is only a small file or something can anyone help me get my three icon back ---- also can anyone give us a quick break down on what the cabs do and the information of why we would want to install the extended rom??
Cheers all

andytof47 said:
but I really only want one thing from them, and that is the access to my 3
Click to expand...
Click to collapse
search for the cab file, CWW Enterprises AUS Operator Con. Run it and it will setup a access point thingie for 3.
then open your ineternet explorer and type the address three.net.au, go to that page then you will be able to find My3
YOu dont even need the CWW Enterprises AUS Operator Con cab file if you already have the 3 services setup on your phone which can be done manually if it is not already there. You can checkout hte three website or call 3care and ask someone to help you set it up.

aaah the CWW file is the 2nd file in the OP

acess denied on three.net.au
Yeah, I installed the CWW Enterprises AUS Operator Con, and ran it, then chose 3, but I am getting an access prohibited error when I connect to three.net.au
Am i supposed to install all the three rom? or is it just that cab --- remember that all i want is to access my three
Cheers

Hi,
Does this work with other ROM ?
Thks

cmon little help maaaaates
Cmon guys lets work this out -------- I gather most of us would be on 3 within oz
so it will help us all

installed all and I have the key back
Hi Just an update --- I installed all of the extended cabs ---- I was still getting the problems with access being denied however It was MEEEEEEEEE I was trying to connect via my wireless connection not GPRS
It's all Good now
Cheers all

A little advice?

hello all, I currently have a tilt and am looking to upgrade to a cooked rom. I have my old 8525 Hermes/win 5 that I wanted to upgrade first (to get used to process) before bricking my tilt. I've done much reading & found all the hrd splsh & CID info for my Kaiser but not sure what to use for my 8525.
Can anyone pls, give me link to best hrd splsh for my 8525 to use. If all goes well with my 8525 im going to move on to my tilt. Any advice or warnings would be greatly appreciated.
Thanks in advance!

Srry folks, I've found what I'm looking for. I THINK! Trying it now. If this is wrong guide pls advice!
http://www.mrvanx.org/thg/index.php?option=com_content&task=view&id=16&Itemid=26

It's the right one .

Great... Hrd Splsh was successful! Now I'm off to the races. Just not sure what race to begin with... Any advice on most popular cooked rom to begin with.
And any tips greatly appreciated.

Depends on you... if you want something to play with, try the latest ROMs from TAI (Hero V3) and +QuePPC (Moonspell B2).

Sweet, Found the downloads for those roms! Much appreciated!!!
Do I do the same process as I did to hrd splsh my phone? If not do you know of quick quide to explain steps?
And do you know if that same hrd splsh that I just did will work on my tilt as well?

Just double-click on the RUU_Wrapper.exe and follow the steps, that's it. I'd recommend you to go into bootloader mode first (press and hold power and OK button on left side and reset with stylus) and then connect to your PC, I think it's more reliable .
Every device has its own HSPL.

thxs, I've upgraded to win 6 stripped rom first as QuePPC recommended but when I try to download one of his roms rapid share says the dowload has reached it's limit of 10 and is unavailable. I did find one that was available. I'm going to try it, but in the folder it has a ruwrapper & romupdate utility. I am supposed to click the ruwrapper correct? If so how & when do you use the update utility?

It's all uploaded to MediaFire, isn't it? I'd recommend the latest 28008 if you want a 6.5.x ROM.
And there should be only two files, RUU_Wrapper.exe and ruu_signed.nbh. All other files are automatically generated after you choose the SPL version, perhaps it's a mistake, anyway you don't need to bother about the other file.
BTW you don't need to wait for the customization of the AT&T ROM to finish, just enter the bootloader immediately after you flashed it, saves a lot of time .

I dowloaded Mirion B4 Plain...... ran ruwrapper and Hermes is now modified for first time in 3 years! Sad I know!!! Pretty cool, yet it is plain..... Was first one I could find available from his links... here is the site he has listed...
http://www.techparaiso.com/roms/htc-tytnhermes-queppc/
Well im going to do it a couple more times then attemt the grandaddy of them all "for me that is" moding my tilt. If I brick it the wife will "Brick" me! LOL
I do appreciate all your help you were extremely friendlyl and not rude like many of the replies I've read to noobs.
Thanks again,
newtiltguy

The 28008 are listed at the top... anyway, try for yourself (and give +Que some feedback in his thread).
No problem, man .

If you the SDCard method I can almost guarantee that you won't have to worry about bricking any device! Flashing via USB cable is always risky 10x more if you are flashing a Radio or a ROM with the Radio in.

As long as you installed Hard SPL V7.... ;D