I can't get the Rikaline 6033 to work with my O2 Xda Exec. It seams like the devices wont pair. Is this a knowen issue?
I got the GPS working with my PC but I'm not gona carry around my PC to use it as a GPS
So I know the GPS unit is working.
The XDA discovers the GPS but won't seam to pair.
Any help, please?
What happens exactly during the discovery process ? Can you go through all the pairing steps without any errors ?
That's weird coz I am using the same device with the O2 Exec on Dopod 900's latest ROM and it pairs just fine. In fact I have used it with other ROMs before and they worked fine too.
Once you have paired it, you need to give it an Outgoing COM port before you can use it.
Related
This has been frustrating for me.
Been playing arround for hours to get TOM TOM 3 working with my Xda2's.
Can't seem to get the Bluetooth GPS Recevier to work properly.
I have paired the device.
I can see the GPS OUTPUT service however there is nothing incoming on both fronts.
Am i missing something or can any1 help.
Have you installed the 3.07 update from Tomtom?
Apparently this is required to get it to run properly on the XDAIIs
I wouldnt know yet as I'm still using an old Ipaq - waiting till I get paid before I buy a gps mount and use that with my new Xda
You can try so: launch navigator 3; go to GPS (clicking between Status and Log); on top you must see: TomTom Wireless GPS and Bluetooth Serial Port COM6, and the little square signed. So, the two devices would be connected.
A fix
Thanks for the last comment. It seems like it works with the COM6 port.
help me
I have a Imate Jas-Jar windows mobile 2005. A new version of GPS Nav-N-Go was released for WM 2005 I installed it and it doesn't work! It doesn't recognize my GPS on the Parrot CK3300.
I talked with the Nav-N-Go developers and they told me that the Nav-N-Go works with 9 GPS antenna's. It seems to me that the problem is in the definition of a communication "COM port".
Please help me to solve this problem. Is there a way to define a "COM port" for GPS in the CK3300
jorge
JasJar & TomTom5 using a Parrot 3300 for GPS & Phone
I also have a Jas Jar badged as an Orange SPVM5000 and have similar problems. I am not a techie by any meands but I do not think the problem is with the Parrot 3300.
The Bluetooth pairing connects Parrot and Phone.
Setting the com port is identifying where the incoming gps signal is made of available on the phone.
TomTom5 is the sat nav software I use and it seems only to work by connecting to certain com ports. Unfortunatley, the phone does not like assigning the connection to this port.
Elsewhere on this site there are instructions which allowed me to pair the phone with another GPS BT reciever I use when out and about.
The same procedure will not work with pasiring the parrot.
Does anyone have any suggestions as to how I can pair with the Parrot to get the phone and gps working?
You may find some answers here -- worth a try, anyway.
http://www.parrot.biz/forums/english/
I am interested in this http://www.parrot.biz/united_kingdom/products/index.php?id=ck3300 Does anybody have any experience using this device, how well does it work etc. ?
I plan on using it with O2 Mini S and possibly Tom Tom software what do you guys think?
I have a CK3300 and the similar CK3100 (no GPS) in my wife's car.
They work superbly with Sony Ericsson phones, less well with Motorolas and Nokias but a bit of a disaster with the XDA Mini-S. Doesn't auto connect, doesn't synch contacts properly, overwrites voice tags. There's a bunch of posts on the subject in the Parrot forum on their website. Rumours that there will be a software upgrade shortly which will address some issues.
I haven't got around to trying the GPS with TomTom on the XDA (as I can't get it to install!) but it worked fine with my previous PPC (an iPaq RX3715)
--
Dave
I have a CK3300 not had to meany problems on the GPS side but my xda 2s and my axd mini would not work with the handsfree bit.
My xda exec works fine on GPs and handsfree.
Very good bit of kit overall
Beside experience, I have a question to post here.
I have Parrot СК3300 for 2 years. As handsfree kit, it works perfectly with Sonyericsson K750i, 700i, Z800, P900. With Sonyericsson P900, it works perfectly as hands free kit and GPS module simultaneously.
However, after connecting my QTEK2020i (1.11.00 WWE, Radio 1.02.00, ExtROM 1.11.113 WWE dd 27of Jan 2005) I can use Parrot as GPS module only. Any attempts to use Parrot as kar kit leads only to loud clicks from speakers. So just for now, I use Parrot as hands-free for Sonyericsson K700i and as GPS module with QTEK simultaneously.
No way to fix it. I delete all Bluetooth devices, soft reset, ad only Parrot as hands-free, soft reset. No result.
Can you suggest me how to fix it.
Thanks in advance!
Hi,
I have a CK 3000 intsalled with Tom Tom and a third party BT GPS mouse. The Parrot works very well but it has to be paired as a Hands-free set and not as a headset. One small bug, though: I have to start TT first for the GPS to connect when getting back into the vehicle. After that I start the engine, which connects the CK3000 to my MDA II. If the CK is connected first, TT can't find the mouse.
I've been looking for a way to get the audio to be put through the the CK. I once found a piece of software that could do that on this site but inspite of hours of searching, I haven't been able to find it again. - HELP!
parrot car kit
I have a parrot CK3500 GPS car kit and it works well with TomTom Mobile 5 on my SPV E200 ,C500, C550 and has worked with TomTom Navigator 5 my M2000 as well. This is for Voice AND GPS simultaneously.
with earlier versions of TOMTOM i needed to rename the bluetooth connection from Parrot to TomTom Wireless GPS.
I have an XDA Mini S too which is on a data only tariff (so havent tried handsfree) but TomTom 5 works with it for GPS. They seem a little fiddly to set up, but once set up they are great.
I found i needed to use "AnyGPS Tweak" on all the smartphones to get it to connect initially
I had a CK3300 in another car and that worked exactly the same.
The only criticism is that the GPS voice instructions dont go through the speakers. However sometimes they do, and it seems to be if you start TomTom before you switch on the car ignition, the car kit thinks a call is in progress and relays the GPS through the speakers. It doesnt always work, but sometimes its a bit of a shock to get Jane bellowing through the speaker!!
The downside is that if you take a voice call over the car kit, it seems to re-set and the GPS voice then reverts back to the phone speaker.
I have emailed Parrot about this and have not had a reply as yet.
Re: parrot car kit
shadowman said:
I found i needed to use "AnyGPS Tweak" on all the smartphones to get it to connect initially
I had a CK3300 in another car and that worked exactly the same.
Click to expand...
Click to collapse
Thanks for your reply.
As far as I understand, I can't solve problem with incoming - outcoming telephone calls by some "secret' QTEK settings.
Therefore, I'll try to find "Any Bluetooth Tweak" program to fix it.
Can you suggest any "Tweak" software?
Can any body tell me the best 6.1 cab to use tom tom on have trouble with bluetooth at the moment wont stay paired up.
Will consider using a 6.0 cab if this is the only way.
is there a fix
thank you
Had no problems with either Farias R-32 versions, and Schaps was fine too.
i found TomTom pretty good with pairing and finding bluetooth signals.
TNT 19999
Hy...
no problem with this rom.... i hope this notice can help you.....
If you need some other information cantact me!!!
Bye!!
there must be another problem, mabe with your bt-gps. Been flashing about 7 different 6.0 and 6.1 roms's the last few weeks and none of them heve instable bluetooth gps pairing and using.
i'm using a bt-gps and bt-stereo headset intensive together. listening to mp3, on the same time tomtom is telling directions, while on the background pushmail is bringing me new mail that i can read at the same time, being interrupted for incoming sms.
on top of that all an incoming phone call on my bt-headset will work, just as using a voice command to dial a number myself. and the mp3 player automaticaly pauses and restarts at the end of the phonecall.
tomtom keeps working.
just when ending a phonecall sometime the mp3 sound goes to the pda speaker instead of the headset.
Pays 6.1 ROM works with tt6 and bt.
My hermes kept droping out with TomTomon WM5 all the time, but since I switched to WM6 i never had a single drop.
For me WM5 > WM6 stopped all TomTom problems I had
l3it3r said:
Pays 6.1 ROM works with tt6 and bt.
Click to expand...
Click to collapse
Better late the never: Correct
photoscubaman said:
Can any body tell me the best 6.1 cab to use tom tom on have trouble with bluetooth at the moment wont stay paired up.
Will consider using a 6.0 cab if this is the only way.
is there a fix
thank you
Click to expand...
Click to collapse
hi Photoscuba, i have the exact same problems
First it wont pair properly (says that the key is incorrect).
Its there in the Bluetooth device list, so i open a com port for it then run my gps software, goto detect GPS but then i keep getting GPS reciver wants to pair with you message, as soon as i can answer yes or no, another screen will pop up saying the same
i have asked in several other threads if anyone else is having the same issues, but everyone elses seem fine.
i did read some where about all wm6.1 rom having problems with pairing when using the pass code 0000 (something along the lines of it sending a NULL or a single 0), but i cant find now. ill keep looking for it maybe someone has over come this, on a thread on XDA.
i use a HOLUX GPSlim240 receiver and it works flawlessly with wm6's
im using K's 1.3 at the mo
All these ROMS worked for me
I like to test new ROM and play around a lot.
I have tested Tom Tom 6 and my Bluetooth GPS on the following WM 6.1 ROM all worked.
Below are the ROM in the order i used them.
FARIA-R-32-CLEAN
TNT.19199_Professional_Hermes
CRCs_PHKv12r10
Binky11'sv3_3 - Great Clean ROM and i loved S2U2
PDACorner.V10 - New ROM i am testing right now
What map software and GPS units are everyone using?
maybe theres a incompatibilty problem with certain makes of GPS and wm6.1
im using destinator 7 and igo6 with a holux 240 GPSlim
crusti said:
What map software and GPS units are everyone using?
maybe theres a incompatibilty problem with certain makes of GPS and wm6.1
im using destinator 7 and igo6 with a holux 240 GPSlim
Click to expand...
Click to collapse
Considering they are talking about Tomtom, I assume thats the software they are using....
yea, lol, shoulda seen that coming
but the problem seems to be the gps unit connecting or staying paired to the phone, so if there a list of bluetooth gps units that are working fine with wm6.1 then maybe see why some units wont connect
It all works fine on all the WM6's, so the change is in how wm6.1 handles it as far as i can work out
if theres a list of workin and non working GPS's then maybe i could see what the problem is
Hi, I am trying to get my MDA Compact & SPV M500 to recognise my Bluetooth GPS Unit I bought recently The Unit is A Copilot BT-GPS-365E50. My problem is, I installed Mobile Bluetooth Tools and it installed with no problems. It recognises my GPS Unit, but when pairing the devices the com port setup screen flashes for a moment then disappears. I therefore cannot setup a BT Serial Port. Any suggestions? Is it the GPS Unit? Is it not compatible with my MDA. I have tried this on both my Phones and get the same result. They are both HTC Magicians. I used this process on an XDA II with no problems. I just want to get my SatNav up and running. Hope myou can help and thanks for reading..
use nav n go Igo8
sirftech
Hi!
I also use iGO 8, ith connects automatically. If you like to use tomtom for instance, then I would use the SirfTech tool to establish the connection to your BT-GPS and then run your Nav applcation.
Cheers
Lui