Develop Bugs

Please Help: Problems with charging!!

:?: Hello. I was wondering if anybody has had same problem as i have.
I work on my xdaIIs a fair bit away from home and as a result i need to recharge it every now and then. I have a usb charger cable that i use to charge it using other computers and also via a usb car charger pluggy thingy sorry cant remember name :lol:
The problem i have is that while i am charging my xdaIIs using this method the battery power starts running DOWN as if the power is being drained!!! The device is definately telling me its being recharged.
Please help... I have no idea what is going on???!!!
THANKYOU in advance. 8) :?

Depends what you are using to charge I had the same problem with a mini sync cable I bought sync'd fine but didnt charge but that because it was designed for an XDA not an XDA2 bought a new one from boxwave and its fine.
But certainly if your device is sufficiently drained it will be pulling more power that your PC's USB slot will be willing to give it so you could be running into that.

Novice Gadget Boy said:
The problem i have is that while i am charging my xdaIIs using this method the battery power starts running DOWN as if the power is being drained!!! The device is definately telling me its being recharged.
Click to expand...
Click to collapse
I would guess that the charger doesn't supply sufficient current to actually charge the unit. I say this, because I have seen exactly the same thing (= orange light on and the battery power level decreasing fast) when I built my custom charger for XDAII. XDAII is very "picky" and needs a lot of power to charge and the "USB car charger", as you described it, probably can't supply enough.

Thanks for the reply guys.
It used to work when i first bought it but now doesnt.
Any ideas on what i could purchase that WOULD work??

I have had a similiar problem with a similiar charging setup, but mine charges fine as long as the battery level does not fall too low, if it gets below about 30% then it seems to decharge instead of charge... its really strange.

Cigarrete adaptor charger Draining mine too..
I had a Ipaq 2210 installed in the handle bars of my bike with a Holux BT GPS, recently after breaking 2 of them( IPAQS) I've replaced with a XDA IIs, I had a cigarrete adaptor for the IPAQs and another for powering the speakers... as now i can't use the speakers (due to the horrible 2.5 jack)I've modified the supplied connector for charging without the craddle to fit the connector for the speakers...
I realized from time to time the XDA turned it self off... and last travel it just died with the orange led on and battery 0%....
However first time I've used it was a 700km trip (paris - switzerland) and that time had no pbm (once or twice it turned off but that was all)
I've noticed that the supplied wall power adaptor is a 2Amp one... which looks like enourmous to me... but i tought that cigarrete adaptors were not amperage limited (but for your battery and generator/alternator)
One think I havent tried is to cut the Ipaq's one and fit the connector there... as the Ipaq uses the same wall power thing perhaps the cigarrete adaptor will be the same too....
Please any advice for me ??
I would also like to mod the suppplied connector into a usb stand alone sync cable (pls advise on it too....)
Also i would like to fit an Ipaq IR led onto the XDA to use it as remote for my digital rebel camera.... (advice again?)
Thanks in advance
N

Charging a TMobile MDA PRo in the Car

Hi, I have a TMobile MDA Pro and i have purchased an in car charger so that I can use it with TomTom satnav unit, slight problem, unit does not charge when in the car. Bizarre, as when I use the standard USB Charge & Sync cable with PC happily syncs and charges with no issues. Anyone any ideas, does there have to be a specific setting on the unit to enable it to accept charge via the cigarette socket in car?
Many thanks

I found that to charge the universal, pins 4 and 5 in the mini USB plug need to get joined together - by default pin 5 is not connected to anything (well, wasn't in the cable I had). I've made that modification, and am powering a couple of devices of of a 2 port hub in the car.
Cheers,
Steve

Hi, sounds like a problem I am having and meaning to ask about.
I've got a USB cigy lighter adapter and tried plugging in the sync lead to provide power when it's in the car. So if I have my Exec in standby the charge light will come on (I think it charges sitting on the today screen, but not to sure) but as soon as I fire up tomtom the charging light goes off....
Does this sound like your problem, or are you not charging at all?
I'm interested in finding out what I need to charge the Exec while it's running tomtom? Anyone have any ideas?
Cheers
Matt

I'm pretty certain that I didn't get a charge light at all with my cable until I modified it, then it works, as expected, including in TomTom.
To confirm what I've got is:
- A Ciggy to USB socket adapter
- A two port hub plugged into the adapter
- Modified cable into the hub (along with an unmodified cable connected to my BT-77 GPS unit).
Plugging the cable (prior to modification) directly into the adapter, rather than the hub, didn't work either. The Brodit all-in-one adapter/cable worked fine (and I still have it intact, but not in use), but if memory serve, pins 4 & 5 appear to be connected. I used a multi-meter to try and find out why that one worked, and my combination didn't.
All of this stuff is wired in behind the centre console, so I've not got any unsightly wires, or anything.
Cheers,
Steve.

I think you need a car charger that can output 1000mA to charge the Universal. Same requirement also for an AC charger. 1000mA is what's important. Cheers

Hi, We have had quite a few customers with this issue, we advised and they have opted for the brodit active mounts which have the inbuilt cig chargers and it has cured the problem, or for the neater solution they went for the Molex hardwired versions to stash the cables behind the dash area,
The codes are: 968649 for the cig charger version or 971649 for the Molex hardwired version, http://www.dsldevelopments.com/brodit/holder/T-Mobile+MDA Pro-Brodit-Holder.asp
Hope that helps, drop me a line if you need any advice,
Thanks again
Bryson

Found 1A 5V car adapter
this is the only place I found off ebay that has a 1A car adapter
http://cgi.ebay.co.uk/CAR-CIGAR-CIG...4QQihZ006QQcategoryZ15329QQrdZ1QQcmdZViewItem
It works fine on my MDA Pro, just need to plug it in while it is off for it to start charging.. if turned on, then pluged in, then it won't start charging.
I even have an 800mA adapter, but that doesn't help the MDA Pro, it needs more power!

bryson said:
Hi, We have had quite a few customers with this issue, we advised and they have opted for the brodit active mounts which have the inbuilt cig chargers and it has cured the problem, or for the neater solution they went for the Molex hardwired versions to stash the cables behind the dash area,
The codes are: 968649 for the cig charger version or 971649 for the Molex hardwired version, http://www.dsldevelopments.com/brodit/holder/T-Mobile+MDA Pro-Brodit-Holder.asp
Hope that helps, drop me a line if you need any advice,
Thanks again
Bryson
Click to expand...
Click to collapse
Hi there Bryson
The items you quoted are actually the charger and the holder for the PDA. I also notice from the link you provided that there are 2 cig chargers (items codes 942625 and 942650). Can I know what are the differences between these 2 models and would either of this chargers charge the Universal while it is running a navigation software such as TomTom or Garmin Que?
Also, do you ship to Singapore?

Please sell me your car charger

I have been trying to get hold of a working car charger for the Universal that would charge the phone while it is running navigational programs but to no avail.
If anyone has any for sale, do let me know.

vapor said:
I have been trying to get hold of a working car charger for the Universal that would charge the phone while it is running navigational programs but to no avail.
If anyone has any for sale, do let me know.
Click to expand...
Click to collapse
The car charger costs barely $5 in china and on ebay. It can be purchased from anywhere. I use the car charger that i got with my Holux GPS reciever. I have a lot of car chargers. This is how they work. You plug in your USB cord into the car charger and the car charger goes into the cigarette lighter in the car. I am not selling mine. Go get one from ebay. Just search on ebay for USB car charger.

nuclear said:
The car charger costs barely $5 in china and on ebay. It can be purchased from anywhere. I use the car charger that i got with my Holux GPS reciever. I have a lot of car chargers. This is how they work. You plug in your USB cord into the car charger and the car charger goes into the cigarette lighter in the car. I am not selling mine. Go get one from ebay. Just search on ebay for USB car charger.
Click to expand...
Click to collapse
I have done so and the thing, its either I'm having bad luck with them or there's something wrong with my phone. The best I ever got was that it charged the phone when it was OFF but when I switched it on, the charge disappears.
I tried using my GPS's car charger and another USB Car Charger as well but they both do not work and I do not know why.
I have spent so much searching for the right car charger which is why I am so desperate now just to get a second hand one that would definitely work.

vapor said:
I have done so and the thing, its either I'm having bad luck with them or there's something wrong with my phone. The best I ever got was that it charged the phone when it was OFF but when I switched it on, the charge disappears.
I tried using my GPS's car charger and another USB Car Charger as well but they both do not work and I do not know why.
I have spent so much searching for the right car charger which is why I am so desperate now just to get a second hand one that would definitely work.
Click to expand...
Click to collapse
I think you'll find this has been discussed here before, try searching.
FYI, I used the charger from my Holux GPS, and whilst it works, it dosn't charge whilst using TomTom. If you try a long trip with this setup, you will find that the battery charge drops. This charger is good only for topping up the Uni whilst not in use. I use the genuine iMate charger and this does run TT and charge at the same time. You need the higher amperage of the iMate charger.
Mav

mavrik64 said:
I think you'll find this has been discussed here before, try searching.
FYI, I used the charger from my Holux GPS, and whilst it works, it dosn't charge whilst using TomTom. If you try a long trip with this setup, you will find that the battery charge drops. This charger is good only for topping up the Uni whilst not in use. I use the genuine iMate charger and this does run TT and charge at the same time. You need the higher amperage of the iMate charger.
Mav
Click to expand...
Click to collapse
Nope, my car charger works fine in charging the Universal while in use and turned off. It just charges a bit slower while in use and thats quite an obious reason.
Only thing to consider is how much the output levels are of the car charger.

Thanks for your input guys
I have done my research on the car chargers and from my understanding, the only reason could be the shorting of pins 4 and 5, or something along those lines. Other than that, I have tried out various models of chargers and they do not work.
For those who say you need a higher output, I have tried those rated at 1000mAh which is that charger output for the wall unit. This charger connects to the USB cable yet even when I tried a couple of types of USB cables, it still did not charge the phone.
I also used a lower output of 850mAh and it worked fine with the cables tested abouve, so it shows the cable had no problem. But it could only charge the Universal when the phone was turned off. When switched on, the phone does not even charge, not even in the least bit and I am not sure why. Surely 850mAh is more than enough to get it charging while on the navigational (TomTom) programs because when I connect my Universal to my laptop to charge, I am still able to run TomTom and that charge is only rated at 500mAh.
Thus you can see why I am so frustrated with all these charges. If any of you are able to point me in the direction of getting an original chrager online, I would be more than grateful for your help and guidance. I also wouldn't mind buying a third-party charger as long as it works perfectly with the phone when running nagivational programs.

This is the one i have. works brilliantly, charges universal and BT GPS reciever and lets me use my copilot navigation software.
http://www.easydevices.co.uk/sp/searchbox13/products.asp?partno=MTCUSJASJR
http://www.mdapro.co.uk/shop/xcart/T-Mobile-MDA-PRO-Handsfree-Custom-Car-Kit-with-speaker-pr-36.html

vapor said:
Thanks for your input guys
<snip>
I also used a lower output of 850mAh and it worked fine with the cables tested abouve, so it shows the cable had no problem. But it could only charge the Universal when the phone was turned off. When switched on, the phone does not even charge, not even in the least bit and I am not sure why. .
Click to expand...
Click to collapse
Well, I can only guess the 1000mAh you tried may have been defective???
My car charger is the iMate genuine car charger. This rated at 1000mAh and works great. It charges and runs TT6 no problem. (well, that was untill it packed up the other night so I'm sending back under warranty) But it did work great.
All the best
Mav

Poundland have a USB car adapter that works perfectly with your USB lead to charge the Exec - works fine on mine!

mavrik64 said:
Well, I can only guess the 1000mAh you tried may have been defective???
My car charger is the iMate genuine car charger. This rated at 1000mAh and works great. It charges and runs TT6 no problem. (well, that was untill it packed up the other night so I'm sending back under warranty) But it did work great.
All the best
Mav
Click to expand...
Click to collapse
I thought that could be the case but it charges my GPSr fine so had to strike that one out.

wassa said:
This is the one i have. works brilliantly, charges universal and BT GPS reciever and lets me use my copilot navigation software.
http://www.easydevices.co.uk/sp/searchbox13/products.asp?partno=MTCUSJASJR
http://www.mdapro.co.uk/shop/xcart/T-Mobile-MDA-PRO-Handsfree-Custom-Car-Kit-with-speaker-pr-36.html
Click to expand...
Click to collapse
Hi Wassa you se co pilot - so do i - so please can you tell me what onthe easy devices what you chose for the correct cable that will owrk with the bluetooth gps unit.
cheers mate - thanks for your help.
lr

re: car charging problems
just one thing to ask: are you a smoker?
I only say this because i use a usb car charger and it only charges faster than it drains if you are careful to blow/clean all the fag ash out of the socket in the car to get a good connection. Otherwise the charging led sometimes comes on but cant supply enough power to charge quicker than my universal drains its battery

mickey_jaw said:
just one thing to ask: are you a smoker?
I only say this because i use a usb car charger and it only charges faster than it drains if you are careful to blow/clean all the fag ash out of the socket in the car to get a good connection. Otherwise the charging led sometimes comes on but cant supply enough power to charge quicker than my universal drains its battery
Click to expand...
Click to collapse
nah I do not smoke so I do not see why it should be happening.

mickey_jaw said:
just one thing to ask: are you a smoker?
I only say this because i use a usb car charger and it only charges faster than it drains if you are careful to blow/clean all the fag ash out of the socket in the car to get a good connection. Otherwise the charging led sometimes comes on but cant supply enough power to charge quicker than my universal drains its battery
Click to expand...
Click to collapse
I never get ash in there. Its impossible to get ash in there unless you really want it there. You are supposed to use the knob and not stick your cig in there. lol

I have used a Belkin one, one that I bought for an iPod that has a standard USB socket you can plug any cable into, and a cheap ebay one.
They all work, BUT.. you have to plug them in when the device is off. Once the charge light comes on, you can turn it on, and it will charge, although slowly.
If you plug it in while the device is on, it will not start charging.
I don't know why this is, but considering it's the same on all 3 chargers, and I have seen people complaining about this on the Universal a few times, I think it's just the way things are.

AlanJC said:
I have used a Belkin one, one that I bought for an iPod that has a standard USB socket you can plug any cable into, and a cheap ebay one.
They all work, BUT.. you have to plug them in when the device is off. Once the charge light comes on, you can turn it on, and it will charge, although slowly.
If you plug it in while the device is on, it will not start charging.
I don't know why this is, but considering it's the same on all 3 chargers, and I have seen people complaining about this on the Universal a few times, I think it's just the way things are.
Click to expand...
Click to collapse
Yup because at first i was wondering too why my device isnt charging. Actually the charge light on my GPS came on quicker than the Universal.lol... i had to wait for a few moments and kept trying till the universal began charging. So yeah you gotta wait with the universal shut off.

I have not bothered reading all the replies but the problem with most car chargers is the AMPS, the voltage is right @ 5 volts but the amps is usually 0.5. Ideally the universal needs 1 or 2 amps, the new tomtom standalone units use 2 Amp USB car chargers and are a direct fit for our universals !!! isnt that convenient.

I don't have a charger as such but I use - strangely enough - a sony psp usb cord that goes through a USB cigarette adapter picked up from a poundshop here in UK ( a shop that sells lots of cheap gadgetry - for the non british of you )that also has a connector that is exactly what is needed for my fortuna bluetooth . it works fine . I realise that it does not recharge the phone but keeps it charged . I've not tried the usb to usb mini through the usb lighter adapter though . I guess that the trick its to have a charged universal before you leave on a trip .

I found I was having trouble charging my Universal with a USB adaptor in the car. The "charging" light would only come in if the phone was off, and while it would stay on when the phone turned on, it would not actually be charging and the damned thing would eventually run out of charge (I drive lots).
I eventually realised that if I turned the screen brightness down to it's lowest illumination whilst charging it worked fine. Obviously not much power comes out of the socket...
Now my battery has packed up due to another issue, but turn the screen down and it should be fine.

Voltage Regulator 5v / 2a /
I have read with interest all the comments and solution here and thought it might help to add mine what I have made and fitted to all my vehicles is a mini USB power supply, simply cut the pc plug from a mini USB lead and add one UA 78S05
VOLTAGE REGULATOR 5V / 2A /
http://www.donberg.ie/descript/u/ua78s05.htm
Connect the input leg to 12 v dc bolt the regulator to a GOOD earth/heat sink (car body) and off you go up to 2 amps @5v BUT DO TEST WITH VOLT METER BEFORE CONNECTING PPC

TyTN won't charge with car charger??

Hi,
I recently bought a car charger (actually, it's a 3-in-1 kit, with USB-2-miniUSB cable, plug-in car charger, and travel charger). This set seems not to work with my TyTn, but work perfectly with other HTC pda's - Touch, Cruise etc. However, that cable works nicely when plugged to PC.
Anyone have a clue? Maybe, I should change some power management settings in the TyTN?
Thanx

Hi,
I have the same problem.
Sometimes is charging O.K. (when the screen is off and Hermes is in Standby). But if I have a Phone Call, or if I use the car navigation, charging won´t work.
(Everythink was O.K. with WM5, I think, but WM6 and WM6.1 has this problem on my Hermes - I tried many ROMs, now I use CRCs PHKv12r9, Radio 1.47.30.10)

Get an inverter from Maplins http://www.maplin.co.uk/Module.aspx?ModuleNo=48723&criteria=inverter&doy=3m4 for £19.99 you can then use your home charger...

Ah OK scratch that idea I didn't look at the flags before posting...

I have one, but the question is, why car charger won´t work.
I use the inverter with everything up to 300W without any problems.

I dont understand WHY people have this problem.... I bought a CHEAP little car charger that allows me to use a usb cable. I plug in, leave for a minute or so and it starts charging. Make/ recieve calls, use GPS software and never have a problem. I would say that the charger was made good BUT its a generic "made in china" charger.... Must've been BLOODY LUCKY to find it...

I had this problem with mine, sometimes it would charge, other times it would need to be restarted before picking up the charger? This was using the same sort of charger that plugged into the lighter socket, then the USB-to-MiniUSB plugged into the charger.
I started using a spare charger for a TomTom One which worked perfectly.

In fact, I have 2 car chargers to which I plug USB-mini cable, both not working. I just wonder why... Can it be hardware or software problem? I suspect you all use WM6.... OK with WM5?

I can't find the post now, but there have been a couple of discussions about the charging issues with the TyTN. My TyTN is very picky about the charging cable. It has something to do with a requirement that the data pin in the USB cable either be connected to something live(like a computer) or that the data pin be jumpered to the ground pin.
I have tried a number of charging solutions and keep going back to the AT&T store for a charger that works. I have an external battery for my laptop from Battery Geek, Inc that has both a USB port on it and a mini USB charging cable. Both don't work with my TyTN but work with my wife's Wizard. Actually they work with my TyTN about 2% of the time, just enough to make me think it is going to work.
Someplace back in the archives I've seen a description of how to modify a USB charging cable to work with the TyTN, but I can't find it right now.
Rick

Look HERE !

Brodit active car holder won't charge the S2

Hey guys,
I got my brodit active car holder now for a few days and it seems it doesn't supply enough juice to the S2 while in use :-(
While navigating with navigon, it even loses charge, though it's connected .... that's really disapointing, since brodit normally supplies quality products.
Anyone else got the brodit active holder with the same problems?
boba

Not got the Brodit, but I have the same problem when using CoPilot and charging via the USB cable attached to a car charger. It can keep the charge at current level with CoPilot on, but will only charge with CoPilot off.
Also noticed if SII has less than 50% charge, it won't charge at all with CoPilot on.
Taking a punt on one of these to see if it makes a difference:
http://www.buyincoins.com/details/d...-for-ipad-iphone-4g-ipod-2a-product-2748.html

Which holder do you have exactly? Can you make a photo?
Does it toggle car dock in the S2? You can see a steering wheel in notification bar.
ALexander

I was thinking exactly the same thing this lunchtime. I have the cigarete lighter active Brodit mount and - if i makes any difference - a 2004 Vauxhall Astra H. I as wondering if I would have to turn off the nice things [like satellite view, etc] on the phone for it to survive the journey. Not happy.

boba23 said:
Well I don't know the exact reason yet, but it seems the S2 doesn't accept enough juice from the charger,
Click to expand...
Click to collapse
Is the S2 in USB AC Mode?
Take a look here: Einstellungen - Telefoninfo - Status
Yesterday I modified a Brodit active car holder from the good old htc HD2 to fit the S2. Now I have fast charging (AC) and Car-Mode.

I currently own some chargers. Not the original one, well the UK Version with no use in Austria.
A 1A HTC Charger with USB socket, a 450mA noname charger with USB socket and a no name car charger with micro usb.
The car charger and the HTC charger show charging(AC) whilst the noname 450mA charger shows charging(USB)...
It would be interesting to measure the exact mA taken by the phone...
ALexander

CurrentWidget doesn't work...
ALexander

Hi all,
Okay, I've now tried four different chargers, and I've also had the phone replaced. Today, in a last attempt, I bought an official Samsung charger.
NONE of them work - even though the phone says "charging on AC" for all of them.
The only thing I haven't tried is a different car (which I'm going to do, once my neighbour gets home).
The one sensible suggestion I've read is that Samsung have screwed up somewhere in software and the phone can't draw enough juice.
Electronics is beyond my little brain, so I don't get why the GS2 charges from my netbook (even when it's only on battery) but won't charge in the car.
And I'm not talking when I'm using satnav. It won't charge at all. In fact (weirdly) it actually DISCHARGES much faster than it does if it's just sitting in my pocket.
I've logged this with my provider (Voda UK), because I refuse to get stuck with a useless phone for the next 18 months if this isn't sorted out. It's ludicrous. If I can't charge the phone in the car it's as good as useless to me.

UPDATE:
Okay, I just tried my neighbour's car (Vauxhall Astra) and the GS2 charged perfectly. 3% in four minutes. Pretty much what I get off the mains charger.
I wish I knew about electrics but I don't. Explanations will have to come from the boffins round here.
I tell you what, though. I don't really want to get a new car just to use my phone properly

Do you have any chsrger with a led?
If the led stays dark the cigarette lighgter of your car might need a new fuse.
Which car?
Sent from my GT-I9100 using XDA Premium App

Ive ordered one of these mounts and will report how it behaves in my 2008 Civic

barneypooch said:
UPDATE:
Okay, I just tried my neighbour's car (Vauxhall Astra) and the GS2 charged perfectly. 3% in four minutes. Pretty much what I get off the mains charger.
I wish I knew about electrics but I don't. Explanations will have to come from the boffins round here.
I tell you what, though. I don't really want to get a new car just to use my phone properly
Click to expand...
Click to collapse
You might be able to change to a higher amp fuse in your car fusebox.

eddablin said:
You might be able to change to a higher amp fuse in your car fusebox.
Click to expand...
Click to collapse
ROFL!! Genius!

Brodit mount arrived and looks great. Fit and design excellent and seems to charge as I would want.
Sent from my GT-I9100 using Tapatalk

So what charger do you guys advice? Which charger does charge the phone, even while navigating with Navigon?

I got the Brodit active charger (BR512...), there isn't a problem with charging at all.
I think the issue you got is really car related. My guess:
a) your cigarette lighter port is poorly wired -> Measure voltage at the port with a voltmeter, it should be at least 12V DC (Edit: Even if it does there is still the possibility that your wiring is bad, showing 12V doesn't mean it can handle the current this charger needs)
b) your cigarette lighter port doesn't make a good contact to the brodit plug. Check for corrosion of the contacts, dust, dirt, etc. Some ports go bad after lots of plug in / out cycles.
If you have no idea what I'm talking about here, I'm pretty sure every car mechanic can fix your problem for a small amount of money
Edit: it's very possible this plug works with other chargers and phones and still fails with the S2 charger. The reason for this is the different ways chargers convert the car's 12V DC into 5V DC. Some might work down to 7V input, some already **** up at 11.8V

I have the same problem with my GSII trying to charge it with my 12V Ipod adapter...
I just arrive from a short travel with my Citroën Xsara and i almost got lost cose the phone discharged all the time while using IGO on the phone...
I don't think this is car related because there are so many people with different cars having this problem... so... Samsung wants me to buy a new car to be able to use their phone in travels?

Hi guys, just thought I'd try to clear up a few of things:
1. All phones can use more power than they can draw. Note that the more apps you use, the more juice you draw depending on their features.
2. Not all CLAs are the same. Most modern devices will need 2amps, but the majority of CLAs on the market are 1 - 1.2amp units.
3. Your device will stop charging if it reaches a certain temperature, without giving you any further indication that it is too hot. This is a common scenario if you've got a phone on the dash giving guidance, with the sun rays beating a back. And yes this does mean dedicated satnav devices have a greater operational temperature range than phones, usually a 15-20 degree difference (celcius).
4. If the CLA is being tripped out due to poor isolation (a lot of cars suffer from this) it will also stop charging.
5. In general terms, the lower the battery level of the device, the more juice it pulls. This is why you may find you ha email no problems getting a small charge when you start with a battery at 85%, but your phone dies if the battery is 50% or less.
Hope that helps.
Sent from my GT-I9100 using XDA Premium App

OK, I have no idea what the problem is. I have a Brodit active charger (the cig-plug version) for my Galaxy SII. It's not charging my phone AT ALL. There is no sound, nothing displayed on my phone when I connect it. I have the charger led (blue light) on, so I know it's working.
Things I have tried so far:
1. Asked for a replacement from Brodit. Got it, no difference.
2. Tried with a different car (I have a BMW, my wife a brand new Toyota Auris) - doesn't charge it either.
3. Tried a different no-name universal charger - it works perfectly well, the phone is charging as expected. Other things like the GPS device also work fine.
4. Tried a different kernel and ROM on my phone, still no success.
Any suggestions are welcome.

LazyPawn said:
OK, I have no idea what the problem is. I have a Brodit active charger (the cig-plug version) for my Galaxy SII. It's not charging my phone AT ALL. There is no sound, nothing displayed on my phone when I connect it. I have the charger led (blue light) on, so I know it's working.
Things I have tried so far:
1. Asked for a replacement from Brodit. Got it, no difference.
2. Tried with a different car (I have a BMW, my wife a brand new Toyota Auris) - doesn't charge it either.
3. Tried a different no-name universal charger - it works perfectly well, the phone is charging as expected. Other things like the GPS device also work fine.
4. Tried a different kernel and ROM on my phone, still no success.
Any suggestions are welcome.
Click to expand...
Click to collapse
Thats strange, in the first place i thought a faulty micro-usb or charger. But you got it replaced so can't be the problem.
I have a brodit with charger too, but i use it in a different way, meaning i can remove my holder and unplug it without unplugging my charger. ( near my holder i have a small connector that i can unplug).
What i did is cutting the cable from the charger and i did put a male usb port on it ( regular male usb port) and i have a Belkin charger with a usb port, this charger deliver 1A charging current and charge my phone even when i use my navigation. ( with bluetooth and gps on).
Your phones micro-usb seems to be fine too because it charge with other brands of chargers.
Your BMW delivers enough power i guess at your cigarette lighter plug, because it doesn't charge at the Toyota either and both not delivering enough power would be coincidence.
Anyway mine works perfect the way i did it and if i can remember it worked too with my original plug attached too. ( though the original one doesn't provide enough power sometimes to keep it charged while using navigation).
The only thing i can think of is that there is some stress-pressure on your connection between phone and holder connection and that one pin isn't connected properly, with the universal charger you only plug the micro-usb plug in your phone and the micro-usb plug can adjust freely to your phones micro-usb port.
Try to wiggle a bit with your phone when in the holder and see if the power comes on. Or try to connect a little device on your holders micro-usb port ( if you have something small that charge over micro-usb) and see if that works.