Brodit release new Holders for HTC Artemis/P3300 etc - P3300, MDA Compact III Accessories

Hi Guys,
Just to let you all know that Brodit have released the following HTC Artemis/MDA Compact III/HTCP3300 holders
To view images and specs etc follow the link:
http://www.dsldevelopments.com/brodit/New_Holder/HTC+Artemis-Brodit-Holder.asp
Thanks all, if you have any questions, please drop me a line,
Bryson
_________________
DSL Developments Please visit my website for all Brodit Device Holders & Proclips

Nice
I'm going to need one of these when my Artemis arrives within a couple of days. Not sure but i think that it comes with a holder for the car in the box. Anyway just wanted to say that you should stay away from the holders that attach to the heating vents of the car. My unlce who works for Cisco Systems told me that they have been flagged by his company because it apparently is not good for the device.Not sure if this is true but just wanted to give this community a heads up on this one. I say you go for the suction holders.

neptune said:
I'm going to need one of these when my Artemis arrives within a couple of days. Not sure but i think that it comes with a holder for the car in the box. Anyway just wanted to say that you should stay away from the holders that attach to the heating vents of the car. My unlce who works for Cisco Systems told me that they have been flagged by his company because it apparently is not good for the device.Not sure if this is true but just wanted to give this community a heads up on this one. I say you go for the suction holders.
Click to expand...
Click to collapse
The P3300 comes with a car holder, which looks very much like the brodit holders oddly enough...
Also comes with a windcreen suction mount and a natty HTC car charger (witch shiny chrome HTC embossed on it)

You only get the car charger, windscreen mount and 512MB Transflash card with the Premium version (this is the one with full TomTom mapping included) - well thats what the manual states, I got all three "extras" with mine - Mike

I didn't get any accessories with my device. I just got the base unit with the manuals, etc. I need a car mount.

neptune said:
I'm going to need one of these when my Artemis arrives within a couple of days. Not sure but i think that it comes with a holder for the car in the box. Anyway just wanted to say that you should stay away from the holders that attach to the heating vents of the car. My unlce who works for Cisco Systems told me that they have been flagged by his company because it apparently is not good for the device.Not sure if this is true but just wanted to give this community a heads up on this one. I say you go for the suction holders.
Click to expand...
Click to collapse
Hey Neptune,
I see what you are saying, but thousands upon thousands of very satisfied customers and no damaged devices, along with rigourous controlled tests really do mean you are worrying about this without a valid cause!
Thanks
Bryson

anyone know of any other holder/charger units for the artemis? £40 quid is kinda expensive!

It Sucka
ansaar99 said:
anyone know of any other holder/charger units for the artemis? £40 quid is kinda expensive!
Click to expand...
Click to collapse
This device sucks its build cheap ass so it wont fit smoothly it has broken my mini usbport on the p3300. Need to get it fixed hope it will fall under my guarantee. Find another carholder/charger this one sucks!

Perjan, thanks for the heads up. For £40 i would be expecting top build quality.

Brodit holder for UK O2 XDA Orbit
The Orbit is basically an Artemis with a redesigned shell....
Does anyone know if the Orbit will fit into an Artemis / Brodit holder?
Cheers
Chris

hi
the orbit usb port is located slightly differently to the P3300 i believe it is only millimeters out but could make a difernence. I heard Brodit were making a holder specific to the Orbit for that reason.
Re comments above about vent holders i used one for 2 years with a IPAQ 5550 and had no issues at all.(infact in the summer it was a bonus as the ai con helped keep the device cool)
I find they are not so suitable for the Orbit as the clip/holder that is stuck to the device is not Orbit friendly.and if i use the clip that came with the Pdair case it hangs forward.
i use a suction mount with the side grip bars and it works great with the PDair case.

Well I have the brodit mount for the Artemis and it works well with the Orbit. It arrived after I read this post and I was aware it might not fit exactly so I gently bent the connector on the mount and it now fits perfectly and I am more than happy with it.
I am now just awaiting the brodit pro clip to attach it to the dashboard over the air vent. As I do not want to leave the screen mounted holder in the car due to last attempted break in!
Just to confirm only gentle pressure is needed to align the connection to fit perfectly to the Orbit so well worth the money in my opinion.

Related

Brodit Active Holder and Proclip - Cheapest Price?

Today, received my Brodit Active Holder from Mobilefun. £37.45 inc VAT and Delivery.
http://www.mobilefun.co.uk/product/8605.htm
Received the Brodit Pro Clip from IncarDiscount. £18.94 inc VAT and Delivery.
http://www.incardiscount.co.uk/categories.asp?cat=11500
-Best prices I could find in UK. No problems.
Anyone found cheaper including vat and delivery?
how does it fit? and can you post some pics or email them to me ?
Brodit Passive Holder and Windshield Mount for the USA?
I'm looking for the Brodit passive holder for the JasJar and a compatible windshield mount with an adjustable goose-neck, I'm in the US. www.proclipusa.com doesn't appear to carry either, although I understand they are the US distributor.
Anyone, any ideas where I can get these?
bodge said:
how does it fit? and can you post some pics or email them to me ?
Click to expand...
Click to collapse
Tomorrow Ill take some snaps for you and post them.
But I can tell you, it was a doddle
Re: Brodit Passive Holder and Windshield Mount for the USA?
galt said:
I'm looking for the Brodit passive holder for the JasJar and a compatible windshield mount with an adjustable goose-neck, I'm in the US. www.proclipusa.com doesn't appear to carry either, although I understand they are the US distributor.
Anyone, any ideas where I can get these?
Click to expand...
Click to collapse
I am looking for one in the USA as well. Proclip USA claims that they will have the Passive holder soon, but haven't gotten a definitive answer from them. None of the UK shops appear to be able to ship outside of the US, so I guess we are stuck waiting for Proclip USA to get them. Because the Jasjar is not really a USA device, I'm sure they are not in any hurry to get them in.
tyl said:
Today, received my Brodit Active Holder from Mobilefun. £37.45 inc VAT and Delivery.
http://www.mobilefun.co.uk/product/8605.htm
Received the Brodit Pro Clip from IncarDiscount. £18.94 inc VAT and Delivery.
http://www.incardiscount.co.uk/categories.asp?cat=11500
-Best prices I could find in UK. No problems.
Anyone found cheaper including vat and delivery?
Click to expand...
Click to collapse
HandNav.co.uk have got special bundle deals,
Proclip+Active Holder with tilt/swivel for Pocket PC & mobile phone (Added value bundle. Brodit proclip / car bracket [652713] + Brodit PDA mount/Holder powered through cigarette lighter socket [649] O2 XDA Exec ) £49.98 inc vat and free delivery.
Andy
Heh heh, nice find!!
So how does this clip function.
Do you slide the Universal in, or do you kind of clip it in.
Is the power cord attached to the clip and you just slide it down in to the usb port, or is the wire just dangling all over the place when it's not connected.
I hate multi action holders and dont want something where i have to use both hands and a foot to get it in place.
I go in and out of my car many times a day, so it should be easy and without hassle.
I can live with the fact that i have to use a BT GPS, even though i love my BA holder having the GPS integrated, ooohh and what other choises are there out there.....none :?
Like you, bosjo, I've become accustomed to having my bluetooth GPS receiver powered via a wired link to my old M2000 active cradle. Having juice supplied to both M2000 and BT GPS meant I could never get lost.
I'm hoping in due course these Brodit M5000 cradles will also allow power to be supplied to BT GPS otherwise it's going to be a mess of wires in my car!
F
tyl said:
bodge said:
how does it fit? and can you post some pics or email them to me ?
Click to expand...
Click to collapse
Tomorrow Ill take some snaps for you and post them.
But I can tell you, it was a doddle
Click to expand...
Click to collapse
Pics ?
Damn it twonk - JUST ordered my clip and active holder and then read this post....stupid stupid me.
Anyway - was only £2 more.
The cheapest Brodit ProClip I could find was http://www.carkitonline.co.uk
£17.12 total (13.62 on its own) so pretty good!
CarKitOnline have got O2 Exec holders in and is actually cheaper than HandNav - you need to phone them because the phone is not listed on the website yet.
Coming up to three weeks now waiting for my active holder from mobilefun
Avoid like the black death in my personal opinion
Why dont you just call them and ask them what their problem is. Did they mention that the delivery time is less than that? I am sure ordering from Brodit direct would have been much better.
Yeah they do seem a bit unresponsive...they sent me out a screen protector and a cigarette adapter within a day but my leather case and brodit holder is still 'out of stock'. I phoned them and they gave me a date of 18th...so try phoning them and they will tell you when more stock is coming in.
IN the end i cancelled my brodit holder from them and brought it from handnav (who were supplying the clip anyway) for cheaper .
Still waiting for the leather case though..........
Unversaldoc - how much is the brodit holder direct from them? Surely they will charge more!!
They keep saying stock is arriving, that date comes and no stock, same again this morning, think i was told new stock was coming on 16th Dec and another lot coming 19th Dec so i should definitely have it before the 21st.
Best bit is you pay postage for 2-3 day delivery muuuhaaahaaha
Trouble is the wifes bought me it on her plastic as a stocking filler so i dont want to bug her for her card again, you know how they growl
Hi All,
I sell the Brodit kits and know that Brodit had a severe quality control issue with the charging leads on the active charging cradles, which meant they had to go back to the drawing board and get new leads shipped in from their supplier, hence long delays.
I still have stocks of the all Xda Brodit ranges inc. the Exec in stock if anyone is interested. Please PM me.
Seems a shame that no one told you all of the delay though.
Bryson
www.dsldevelopments.co.uk for all Brodit cradles and proclips
bryson said:
Hi All,
I sell the Brodit kits and know that Brodit had a severe quality control issue with the charging leads on the active charging cradles, which meant they had to go back to the drawing board and get new leads shipped in from their supplier, hence long delays.
I still have stocks of the all Xda Brodit ranges inc. the Exec in stock if anyone is interested. Please PM me.
Seems a shame that no one told you all of the delay though.
Bryson
Click to expand...
Click to collapse
I tried pm'ing you before i ordered anywhere else, never got any reply
bryson said:
Hi All,
I sell the Brodit kits and know that Brodit had a severe quality control issue with the charging leads on the active charging cradles, which meant they had to go back to the drawing board and get new leads shipped in from their supplier, hence long delays.
I still have stocks of the all Xda Brodit ranges inc. the Exec in stock if anyone is interested. Please PM me.
Seems a shame that no one told you all of the delay though.
Bryson
Click to expand...
Click to collapse
I tried pm'ing you before i ordered anywhere else, never got any reply
@Cut,
Costs around £60 for the holder and the pro-clip not including delivery costs. I agree, they are expensive compared to the other resellers but they are dependable and have fantastic support. Personally, i wouldn't mind paying the extra £10 just for the quality of support and feedback

Car Holder for your Artemis do you want one?

Hello to all
Again me trying to see if you interested on buying a holder for your htc p3300, mda compact 3 ex...
I am going to place an order for this kit but I want to know your opinion first, is this must have or just an extra?
Here is the link for the pic
http://www.sidiplus.co.uk/car holder htc p3300.jpg
Let me know please
How much are we looking at for this piece of kit?. I need to get a car holder soon. I was thinking about getting the one, that attatches to a vent, rather than the windscreen mount.
Hopfully about £29.99+£2 recorded delivery it includes car charger or £29.99 including recorded delivery from my website
MADJID said:
Hopfully about £29.99+£2 recorded delivery it includes car charger or £29.99 including recorded delivery from my website
Click to expand...
Click to collapse
need a vent or magentic one
hate putting it on the windscreen
anyone???
Yeah madjid, any vent mounts??
So according to your responses,is not worth getting the suction mount,therfore I will look for the vent one
thanks to u all
Nice one madjid, let us know when you have them.
Any luck yet madjid????????
Found this one guys hope this helps? i have used this company lots of times and they are ok!they have lots of other mounts to under the htc p330 section
http://www.mobilefun.co.uk/product/12047.htm
Chris
Whoops meant the htc p3300 section but you new that
Ps i got my martin fields screen protector from these guys and it works a treat dont bother with any cheapo ones they are crap been using martin fields since xda1 days and they are mint fit and forget, and cheaper than ebay! use this code MFNEWS018698DEU
for free postage before 31 december
Chris
MADJID said:
Hello to all
Again me trying to see if you interested on buying a holder for your htc p3300, mda compact 3 ex...
I am going to place an order for this kit but I want to know your opinion first, is this must have or just an extra?
Here is the link for the pic
http://www.sidiplus.co.uk/car holder htc p3300.jpg
Let me know please
Click to expand...
Click to collapse
Hi Madjid, i am actualy interested in something like this, This one has a handsfree speakerfone too is it???
CAn u let me know where i can buy this from?

car holder for MDA compact III

Hello,
I wanted to get a car holder for my MDA Compact III,
do you guys recommend an air vent car holder or a windscreen mount phone holder?
Have a look at the Brodit range they do a nice holder active and passive and a number of options to hold the unit in your car. I use the Brodit and HR holders in my vehicle - have a read of http://www.pocketgpsworld.com/broditartemis.php for a few details - Mike
thanks for the reply,
is the HR one the windscreen mount phone holder?
The write up contained Brodit products, only one part was the HR holder coupled to the Brodit Pro-Clip, you can see the three pictures using the HR Holder around the text -
"The HR mount is supplied with a flexible arm and windscreen suction cup, I much prefer the Brodit Pro clip as it provides a more stable mounting solution that is vibration free."
or read my post at this link http://www.pocketgpsworld.com/modul...pic&t=48131&postdays=0&postorder=asc&start=51
Both Brodit and the HR units can be used with a winscreen holder or Pro clips, an edless choice of options depending on the vehicle and phone - Mike
thanks for the reply,
i am a bit confused as to how to select the car holder. i am a bit concerned as to if the car holder would fit the MDA copact III.
i checked in the t-mobile store and they are doing something for 10 pounds. the upside is if it does not fit, i can return it.
but then i be limited to a certain choice.
not sure if i should be going for something that attaches to the vents or something that sticks to the windscreen.
i came across this one
http://www.lhdigital.co.uk//product_info.php?cPath=6_127&products_id=126
is there much between two holders?
Its quite a simple choice to be honest, are you happy to entrust a cheap £10 holder from the shop that can mount a mutitude of devices or get a specific holder that has a degree of quality about it?
I have a T-Mobile generic holder and its CR*P - I certainly wouldn't use it to hold a device worth around £400 - your choice - the position is down to what suits you and the style of mount/ Pro clip available for your car - or go with the cheap offerings and take a chance - Mike
thanks for the reply mike,
i think i will go with a nice decent holder.
i looked ath the herbert rickter mount in the post, and the verdict is that it vibrates.
would it be correct to say that all windscreen mounts vibrate?
i have been using the regular tomtom on the windscreen. so i am used to that.
does a pda on the air vent enable easy viewing for navigation purposes (i guess one gets used to it)
are all the herbert richter's the screen mounts.
what is pro clip?
thanks for the reply mike,
i think i will go with a nice decent holder.
i looked ath the herbert rickter mount in the post, and the verdict is that it vibrates.
would it be correct to say that all windscreen mounts vibrate?
i have been using the regular tomtom on the windscreen. so i am used to that.
does a pda on the air vent enable easy viewing for navigation purposes (i guess one gets used to it)
are all the herbert richter's the screen mounts.
what is pro clip?
Well I trust my device to a £3.50 flexible windscreen mount from ebay, and it works perfectly!
I've tried vent mounts, but they are generally rubbish - but it could be my vents! I've tried magnetic ones but they don't stick to my dash - it could be my dash! So far, the windscreen one has been perfect! Although it did wiggle about a bit until I 'adjusted' it by getting it to rest against the instrument console. Not a judder out of it now! and I highly recommend it and the £36.50 saving
t mobil mda compact ııı wm6 rom
where t mobil mda compact ııı wm6 rom
thanks for the reply stunno,
what is the make of your windscreen mda holder?
It was this one
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=160072850929&ssPageName=ADME:B:EOIBSA:UK:11
but I was mistaken about the price, sorry. It was 99p +£2.99 postage
EDIT: they are being sold by someone else now
http://cgi.ebay.co.uk/Air-Vent-Moun...ryZ10364QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
and the postage is only £1.99
thanks for the reply,
i went to the site and though it says that 5 are available i cant seem to be able to buy it.
i think they are all sold out. if you come across any other holders do let me know.
Search ebay for
"Air Vent Mount Suction Car Holder"
there are quite a few
I personally use a Brodit mount attached to a Dashmout bracket.
The wives Vario also uses a brodit mount but attched using a Brodit Proclip, nice and easy to install.
See attched for my car. Need a new pic with the phone attched.
http://img248.imageshack.us/img248/5001/img3789kw3.jpg

Car dock

Anyone know of a good car dock for the Aria that sits on the dashboard for navigation.
demo_guy69 said:
Anyone know of a good car dock for the Aria that sits on the dashboard for navigation.
Click to expand...
Click to collapse
I am not affiliated to the suggested company but have bought from them on multiple occasions.
They should have what you are looking for. Very good build quality as well.
proclipusa.com
From ProClip: for HTC Aria and HTC HD Mini
proclipusa<DOT>com/brodit-device-holder/at&t-htc-aria/charging-holder-with-tilt-swivel-and-straight-power-cord-for-fixed-installation-513142-18221<DOT>aspx
Kind of expensive though.
helluvamatt said:
Kind of expensive though.
Click to expand...
Click to collapse
Yeah, that's pretty much Proclip's deal. They do make phenomenal products, but they charge phenomenal prices too.
One saving grace is that they sell the car mount portion separate from the device grip, so you can buy the car side once and just swap the device side out as you move from phone to phone.
I love the mount I have, but I'm not 100% sure as to whether I think it was worth the cost. If it was maybe 2/3rds to 3/4s the price, I don't think I'd have the same reservations, but at this price point, I'd do some serious looking at universal mounts before dropping the change on a ProClip rig.
I found a Car Mount on eBay for $7. eBay item #: 400148176134 (Enter the number in eBay search, I'm a new member so I can't post links). The eBay merchant (sak.gaming) is based in Hong Kong and it probably is going to take two weeks for the thing to get here (I live in Edmond, Oklahoma, US), but it seems like a good deal. It says the mount is for the HTC Aria/Liberty (We know the Liberty is HTC's code name for the Aria), yet the picture shows the HD Mini. It has been confirmed that the HTC HD Mini and Aria are basically the exact same phone, just one has WinMo and the other is Android. The plus side to the mount I found is that it could also be used as a desk mount, I will report back when I receive the mount. (Ordered on 8/28, could take two weeks)
Aria / HD Mini Accessories
The HTC Aria/Liberty/Intruder/A6366 is the exact same form factor as the HD Mini (and the hardware specs seem identical - only difference is the OS). Anyway, I found this distributer's site that has car mounts, desk docks, adapters, etc.
www<dot>netimes<dot>com/shop/htc-dopod-htc-hd-mini-c-80_754.html?page=1&sort=20a
Desk docks on the first page and car mounts on the second. I haven't ordered any nor have I ever ordered from the distributer, but their prices are pretty cheap (have not checked on shipping).
Now if only the Aria had audio outs through its usb port, but I don't think that is the case since HTC got so much negative feedback on their extUSB jack that was also used for a headphone out.
Let me know about the quality if anyone orders from here.
demo_guy69 said:
Anyone know of a good car dock for the Aria that sits on the dashboard for navigation.
Click to expand...
Click to collapse
I'm using an Arkon vent clip mount... $15 shipped from Amazon, and is a lot more solid than I imagined.
Let me know if you want pictures.
What is the model number of the Arkon you bought at Amazon?
The Arkon car mounts that I found are universal phone mounts. One product holds just about any device. The Arkon website lists most of their products for $20 and that is what I paid for one from Best Buy. I ended up returning it because the vent clips were cheap plastic and they broke off inside the vents. That one was not Arkon, but was very similar. Hopefully yours is more substantial.
helluvamatt said:
The Arkon car mounts that I found are universal phone mounts. One product holds just about any device. The Arkon website lists most of their products for $20 and that is what I paid for one from Best Buy. I ended up returning it because the vent clips were cheap plastic and they broke off inside the vents. That one was not Arkon, but was very similar. Hopefully yours is more substantial.
Click to expand...
Click to collapse
Mine seems to hold up fairly well.
SM429-SBH is the model of the one I purchased... but there are many on the market and I chose a vent mount as I drive an older compact car... (2000 Subaru Impreza)
I took pics for one member and will post them shortly, after dinner.
I guess a thank you is in order. A wee bit off topic, but Arkon is the only company I've found that makes a mount specific for the TomTom XL, called the easy port. I've had mine for at least a year and have broken the flimsy POS suction ring mount TomTom gives you. Arkon makes a pretty substantial looking EasyPort mount. Amazon has it for $9.99. I ordered it; if it is worth a darn, then it says something about the rest of their products. So thank you ioft for pointing my curiosity in the right direction, so that I stumble upon the solution to a problem I've had for a few months ($119 decent GPS unit I can't use).
helluvamatt said:
I guess a thank you is in order. A wee bit off topic, but Arkon is the only company I've found that makes a mount specific for the TomTom XL, called the easy port. I've had mine for at least a year and have broken the flimsy POS suction ring mount TomTom gives you. Arkon makes a pretty substantial looking EasyPort mount. Amazon has it for $9.99. I ordered it; if it is worth a darn, then it says something about the rest of their products. So thank you ioft for pointing my curiosity in the right direction, so that I stumble upon the solution to a problem I've had for a few months ($119 decent GPS unit I can't use).
Click to expand...
Click to collapse
NP! I hope it works out for you.
Pics! Excuse the messy car. The mount is adjustable in terms of phone fitment and swivel. The bottom "feet" can also be slid out of the way of the charge, microphone, and lanyard ports. The side "grips" and bottom "feet" also have cushions on them to prevent scratches and such. I've also included a video showing that the phone is secure in the mount, and the "creaky" sound you hear is my vent... car is old -- it's a 2000 lol.
Taken from my old N82.
Where is the magnet detect on the aria that senses the dock? If there is indeed such a thing.
Sent from my (liberated) HTC Liberty using XDA App
duckredbeard said:
Where is the magnet detect on the aria that senses the dock? If there is indeed such a thing.
Sent from my (liberated) HTC Liberty using XDA App
Click to expand...
Click to collapse
The one I own ("dock") isn't a true dock in the sense of connectivity & screen control. It just holds the phone. Navigation/Maps app keeps the screen on.
I ordered the arkon SM429-SBH, directly from manufacturer for $21.95, never received. I attempted contact several times, and will likely have to file a payment dispute.
I did however purchase the same unit from Amazon, $14.88 when I combined other items (from filleritem.com), to get to 25$ for free shipping. The dock seems somewhat wobbly at first, but when you finally get it situated, gravity and the click grip thing work very nicely together. I have an audio input cable for my head unit that I wired up around the top to plug into it, and my power cable wraps around the audio cable (curly cord), so that it hangs nicely below where the phone sits. I may post pictures if anyone is interested.
Please do not try to order this product directly from Arkon.

No custom ProClip planned for HTC 10

I asked ProClip if they were making a clip for the HTC 10. This was their response...
Thank you for contacting us and for your interest in ProClip products.
Unfortunately, due to the extremely large number of devices released every year, we cannot make holders for them all.
Currently there are no plans to make a holder for the HTC 10. However, this may change depending on customer demand going forward.
We can add your name to our list of customers who are interested in this holder. If we get a large enough response we may reconsider making a holder for your device.
In the meantime we do have several adjustable holders that may work for your device.
You can find those items here: ProClip Universal Holders - http://www.proclipusa.com/mobile-device-holders/universal-holders/universal-phone-holders.aspx
Each product page has the dimensions the holder will accommodate. Please take good measurements of your device with any case you might be using; this will help you to select the best ProClip Universal holder for your device.
Please feel free to contact us with any other questions you may have.
Best Regards,
Click to expand...
Click to collapse
I'm not saying ProClip is good or bad. They are really expensive, but I'm a bit obsessed with their clip for my car that snaps into the dash and provides a solid mounting point just above the vent. My M8 always overheats with my current setup with a windshield mount. I tried a vent style mount, but it just doesn't stay put in the vent.
I love ProClip and have been using them in my vehicles since my Droid Incredible days.
They always say this response up until they release the product. My guess with a phone like the 10, they will definitely launch one. Just hang tough
+1. Considering there is an article on the HTC 10 on the Proclip blog, I'd be surprised if they didn't come out with one. Also, it may be more useful to ask Brodit directly. Brodit designs the holders and then it becomes available via Proclip here.
Just emailed Brodit UK re an HTC 10 mount and this was the reply:
Brodit are going to manufacture one and this will be available around 4 weeks after Brodit receive a device. As the handset is due for release in May I would expect these to be available at the beginning of June.
I will add your details to the list of customers who are interested in a holder for the HTC 10 and will update you when these are available.
Andy-D said:
Brodit are going to manufacture one and this will be available around 4 weeks after Brodit receive a device. As the handset is due for release in May I would expect these to be available at the beginning of June.
Click to expand...
Click to collapse
Sweet. Do these ever get cheaper? Is there any history of a sale when a new part comes out?
I took an old proclip non-case holder from an older HTC phone (kickstand one) that was too tight heated it with a hair drier and expanded it with a C-clamp, perfect fit.
Edit: Brodit Item No. 511403
I've had Proclip in my various cars and for various phones.. A suggestion would be instead of purchasing the custom holder for the phone we have, would be to buy the universal holder. I've used the universal holder for a Nexus 5, moto x 2013/2014, OnePlus 1+2, Nexus 6, Nexus 6p, HTC m8, and LG g4 in no particular order :silly:, and all fit perfectly! The only thing that needs to be custom is the mount that fits onto your dash!
Andy-D said:
Just emailed Brodit UK re an HTC 10 mount and this was the reply:
Brodit are going to manufacture one and this will be available around 4 weeks after Brodit receive a device. As the handset is due for release in May I would expect these to be available at the beginning of June.
I will add your details to the list of customers who are interested in a holder for the HTC 10 and will update you when these are available.
Click to expand...
Click to collapse
Is this confirmed information?
I emailed Brodit SE a week ago, asking the same thing.
Their answer:
- Som det ser ut nu så har vi inget planerat till denna enhet.
In English:
- As it looks now, we have nothing planned for this unit.
Well, that was a copy of the message they sent me. Not sure how I can confirm that it is correct info.... I hope it is correct otherwise I will order a universal mount from them.
Yeah, I got a similar response from Brodit SE a bit over 3 weeks ago.
They're "looking into it" but can't promise anything, said he'll inform the product manager (eg add another one interested on the list).
If Brodit doesn't make one, I'll probably look into RAM Mount. (edit: not the x-grip of course..)
I just use an iottie mount myself..
maybe there is usb c proclip mount for another device that may fit.
i use an adjustable iPhone 6 clip... it works well. Use on my Nexus 5X as well, just loosen, adjust and retighten.
I'm using this. Perfect for my needs.
xander_aa said:
I'm using this. Perfect for my needs.
Click to expand...
Click to collapse
Thanks for the tip. I've ordered one of these from Amazon and will check it out. I have a Spigen A201 mag mount vent type and it just falls out of the vent in my Prius. Hopefully the Airsnap will hold better. The Prius (gen2) vent pivots both horizontally and vertically so it's a bit of a crap shoot but I figure maybe one of the support clip things will help to stabilize it.
The good news is the strong magnet doesn't appear to affect the HTC 10 like it did the M8. The M8 would trigger the Dotview case mode, but the HTC 10 Iceview sensor seems to be very low on the phone so putting the mag mount in the center doesn't trigger it.
http://broditnederland.nl/contents/nl/d7535_HTC_10_Brodit_Houders.html
Brodit HTC 10 holders should be on preorder this week
I've emailed Brodit UK this morning and got this reply
"Thanks for the enquiry.
Brodit are manufacturing a holder for the HTC 10 and I will update you as soon as this is available on the website as a pre-order. Should be some time this week."
http://www.brodit.com/product.html?id=513885&pn=prod&brand=HTC&model=10
Brodit holders are now available on pre-order.

Categories

Resources