Develop Bugs

Alternative way to mount Universal in your car

If you want to know where I got this idea, you should see this one first:
http://forum.xda-developers.com/viewtopic.php?p=314731#314731
I found this way of mounting my Wallaby last year, very effective and cheap and secure. So, last weekend, I tried to mount my Universal the same way. Its kind of hard, as my Universal metal case has different size of its belt clip mounting pin. So I have to put another belt clip to my car. I was finally moving the Cruise Control button to the right and use that middle spot that was occupied by the Cruise Control before to put on the Universal belt clip. And now the Universal can be mounted exactly in the middle. I do not have the audio connector yet, but I have located one that look exactly like my Wallaby one, but with 3.5mm plug.
Hope this will give some idea to some of you. Btw, I could mount my Universal with its silicon case on, but taking the padding inside the metal case out. So my metal case now primarily used as a mounting place in my car now.

Nice set up. Do you know yet of the PQTAA ( http://pc-mobile.net/pqtaa.htm ) will allow you to run audio from a call through your car speakers while still using the mic?

yes, this is exactly the one i'm getting. exactly the same as shown in my picture above, but with 3.5 mm plug. my old one, with 2.5 mm plug, works perfectly with my wallaby for few years now.

lie_ui said:
yes, this is exactly the one i'm getting. exactly the same as shown in my picture above, but with 3.5 mm plug. my old one, with 2.5 mm plug, works perfectly with my wallaby for few years now.
Click to expand...
Click to collapse
I'm just still worried that the mic will not be enabled on the Universal... Please do let me know if you've tested this on a Universal.

I just received this email back from the manufacturer (Pc-Mobile) of that headset (it regards to it working with the Universal):
"If it has a 3.5mm audio jack then PTAMS/PQTAA COULD be compatible but there
is no guarantee as the every manufacturer may use different pin configurations."
I'm wondering if I should just roll the dice and place an order?

galt said:
I just received this email back from the manufacturer (Pc-Mobile) of that headset (it regards to it working with the Universal):
"If it has a 3.5mm audio jack then PTAMS/PQTAA COULD be compatible but there
is no guarantee as the every manufacturer may use different pin configurations."
I'm wondering if I should just roll the dice and place an order?
Click to expand...
Click to collapse
I like to add that, unlike phones with 2.5mm audio jacks, which may have different pin configurations from different manufacturers, phones/pda with 3.5mm audio jacks are likely to use the same configuration.
It is because the jack is to be used for ALL headphones with 3.5mm plug so they must be the same.
The only variable is the ground/mic configuration.
All current PDAs with a 3.5mm audio jack with mic (Ipaq/Loox/Axim) use the same PTAMS/PQTAA ok.

I will be getting the PQTAA from PC-Mobile and will report the compatibility with the Universal once I have and test it out.

lie_ui said:
I will be getting the PQTAA from PC-Mobile and will report the compatibility with the Universal once I have and test it out.
Click to expand...
Click to collapse
Thanks Lie_ui. I also have ordered this, hope it works out...

PQTAA works with Universal!
Good news. I received the PQTAA from PC-Mobile and it works with the Universal! I have tested all functions with my Universal:
- Stereo audio output is carried perfectly to the car stereo, no noise whatsoever.
- Microphone is working great, my voice can be heard clearly.
- The call receive button on the unit is working ok too to receive/pick up incoming call.
This is a great audio adapter (in addition to the fact its a handsfree unit). I find its a lot better way to connect the Universal to the car audio system rather than using other method like BT.
As most car mounting solutions do not include audio adapter to connect the Universal to the car audio system, the PQTAA is a perfect solution.
If you have a cassete player, you can combine it with the casette adapter. If you have an AUX input in your car stereo, thats the best.

Thanks for the info Lei. I also received mine today, haven't been able to really test it out, but it seems nice and it does function as required. Finally!

I finally got a chance to try mine out. The PQTAA works FANTASTICALLY with the Universal!
I tried it in my car, with air conditioning running full blast - the call came in, I was able to answer and hang up using the button on the adaptor. The call was perfectly clear over the car speakers, even with the volume turned up very high the caller reported zero echo from their own voice. They were able to hear me very well even with the mic unit dangling from the rear view mirror (not clipped to my shirt).
Excellent work by PC-Mobile! http://www.pc-mobile.net/pqtaa.htm

can someone tell me step by step ob how to connect universal to car audio ( cd player) what stuff do i need ?
cheers for any info
cudo

cudo said:
can someone tell me step by step ob how to connect universal to car audio ( cd player) what stuff do i need ?
cheers for any info
cudo
Click to expand...
Click to collapse
If youve got a cassette player then buy one of those audio cassettes (Sony does a great one) that includes a cable to plug into the headphone socket on the universal.
Then just start your audio player on the universal and the sound is routed through to your car player.
Hope thats what you meant
Matt

thanks for the idea but I have got only cd player..and it has no aux input.is there any chance to onnect my uni to car audio?
cheers, cudo

Here are some options to connect Uni to a car stereo:
1. If the car stereo has AUX input, this is the best.
Get the adapter we discussed above (PQTAA) and connect it from your Uni then link it to your car AUX input. If you connect it directly from the Uni to your AUX input without that adapter, you only get audio routed to the car audio system, but you will not be able to accept phone calls as a normal audio plug will disable the Uni internal microphone.
2. No AUX input, but has casette player, get the casette adapter. I used this in the past and it worked well, too, until I decided to get an MP3 car stereo and then I made sure I got the one with AUX input.
You will also need to the PQTAA adapter.
3. No AUX input, no cassette, only CD....
You better have FM radio, as this is your last option.
Get a FM transmitter, plus the PQTAA adapter. You will feed the audio through the FM to your car audio system. I used this method before and I did not really like it as its kind of troublesome, you have to turn on the FM transmitter, then select the macthing frequency in your car radio, etc. And in my city, its very hard to find unoccupied frequency, thus I always got bad interference with other radio stations.
4. If you do not like connected/cabled mode, then go with Bluetooth.
You car audio must have an AUX input, though. Get a Bluetooth adapter like this one:
http://www.usglobalsat.com/item.asp?itemid=98
Then connect it to the car AUX input. This way, you do not need to plug something to your Uni and can keep it inside your case/purse.
5. Finally, none works for you, and you would like to upgrade your car audio system, then get the new one that has the Bluetooth. This is the cleanest and best solution I guess.
I was looking at this one:
http://www.parrot.biz/products/index.php?id=rhythmnblue
This one even can sync your Contacts and it has a dial pad in the car audio system. Very nice.
Hope this shines you up.

hi Guys,
Yeah been installing plenty of Parrot kits (LS3200, CK3100 and LS3400 with GPS) for the Exec and Mini s etc.
The parrot kits also have a microphone and audio mute, you may need an SOT audio lead depending on your cars configuration, but these kits are simply superb, call quality is fantastic, syncs all your contacts, and the LS range have colour screens with Voice recognition on all.
I can supply these and install them in the UK if your interested, other than that google or ask a local installer nearer to your location,
Ill be Fitting an Exec with a LS3200 soon, ill try and take some images and upload if anyone interested.....basically with the parrot kit, you get the best of both worlds, a nokia style car kit at last for phone based PDAs like the Xda Exec,
Hope that helps,
Bryson

Is there no way to control the mic from being turned off when you plug in normal headphones? This is what I posted in another thread I created:
Hello everyone.
I have a great pair of wired headphones that I love to use for watching movies and listening to mp3's... noise canceling, enhanced bass, extended range, the works... =)
The only problem though is that when I get an incoming call on gsm, there is no way to listen to the call from the headphones and still use the built-in mic of the universal. I'm forced to unplug the headphones and just use the jasjar's built-in speakers like a regular phone. This is especially horrible on the bus, train, etc.
Funny thing is if I use skype on the jasjar, I can hear out of my great headphones and still talk through the built-in mic... i recorded a few voice notes using the built-in mic while having the headphones plugged in the universal...
clearly, from this... the function is available?
but how do I do this using the gsm phone?
I suppose you may want os details and such... I'm using the newest official i-mate jasjar rom
Thanks in advance!
http://forum.xda-developers.com/showthread.php?t=278604

I can confirm that your findings are indeed true. Other than the phone, other applications that use the microphone (such as Voice Recorder) works regardless there is a normal headphone plugged in or not.
I guess you are right, there should be a way to tweak the OS to enable the microphone all times.
In a meanwhile, the adapter we discussed above would solve your problem too. (It has a microphone and a normal 3.5mm headphone socket).

Modified Original Stereo EarPhone

hI..
I have modified the original stereo ear phone and the sounds is much better quality than original ear phone.
Just need to invest a good stereo earphone and at the same time u still can use the original stereo earphone functionality... to pick up calls etc.
Can leave my ipod at home now.

How did you modify this?
I would love to modify mine. Please explain .
What do I need in hardware ?
Tools
And Know how?

I too have modified headphones. Now I can connect any.

AD10 said:
How did you modify this?
I would love to modify mine. Please explain .
What do I need in hardware ?
Tools
And Know how?
Click to expand...
Click to collapse
Yeah! Did you open the grey box, or did you "cut and past" the wires after the grey box?
PK

paalkr said:
Yeah! Did you open the grey box, or did you "cut and past" the wires after the grey box?
PK
Click to expand...
Click to collapse
I've opened it its easy. Solder points are so obvious. Like a walk in the park..
Photo is a bit fuzzy, Long live the artemis camera!

what do you guys think of this....
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=290072099484&sspagename=ADME:L:RTQ:UK:1
I emailed the seller to ask if radio would work and he replied that it would (don't necessarily believe him though).

how to i open the case?

this will not work....the usb is mean for Motorola phone...and for Artemis...u can't plug in the whole usb adapter...
ezman said:
what do you guys think of this....
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=290072099484&sspagename=ADME:L:RTQ:UK:1
I emailed the seller to ask if radio would work and he replied that it would (don't necessarily believe him though).
Click to expand...
Click to collapse

simontee said:
this will not work....the usb is mean for Motorola phone...and for Artemis...u can't plug in the whole usb adapter...
Click to expand...
Click to collapse
So this...
Compatible with:
1. MDA COMPACT 3, HTC P3300, O2 ORBIT, DOPOD P800W, ORANGE M650, HTC ARTEMIS 160
Click to expand...
Click to collapse
means the seller is lying?

There are 2 types of mini-USB standards I know of. One is the standard motorola one. The other is enhanced mini-USB JUST for HTC devices.
If this guy mentioned a whole list of HTC devices and picture a P3300 with it, I pretty much think that it's the real deal.
If it works for audio, radio shouldn't be a prob

DocMAX said:
how to i open the case?
Click to expand...
Click to collapse
Put your nails between the plasic covers on the sides where the cabels come in and out. It should release pretty easy.

ezman said:
I emailed the seller to ask if radio would work and he replied that it would (don't necessarily believe him though).
Click to expand...
Click to collapse
I might work for FM but it looks to me like it would work badly. Since the wire serves as an antenna if the extention extends the antenna length at best you'd only be able to pick up the lowest frequencies.

really? i've never found the length of the antenna caused problems for fm reception, i used to make my own so i could get better pirate radio station reception. I used to get a long piece of electrical wire, attach it to the (broken) aerial on the radio and hang it out of the window - worked every time

ezman said:
really? i've never found the length of the antenna caused problems for fm reception, i used to make my own so i could get better pirate radio station reception. I used to get a long piece of electrical wire, attach it to the (broken) aerial on the radio and hang it out of the window - worked every time
Click to expand...
Click to collapse
That's great! I've had to form a make-shift car radio antenna myself because some lovely person felt the need to break off the one attached. With trial-and-error 2 clothes hangers worked just fine. However antenna lenth is very important in fm reception because fm is a part of the electromagnetic spectrum that arrives in th form of a wave and: wavelength=light speed/frequency. The fm spectrum is 88MHz to 108MHz. As it turns out fm is about 3 meters in length so the optimal antenna to pick that up is 1/4 of the wave or about 75cm.

wow i haven't seen a clothes hangar aerial in ages i'm sure i used to see them all the time!
Anyway, I ordered one of these adapters and will gladly report back the results if the thing ever turns up

Hi well i got my adapter...as i promised above, here's my feedback....
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=290072099600
It's exactly as described, I can get FM radio, of course you can just plug in the adapter and no headphones to use the loudspeaker.
It also has a mic and a button to answer calls. The L shaped USB input is a great design compared with those sticky outy ones. Plus the length allows me to use my ex71 headphones without the really long attachment. Overall very happy Ordered last Wednesday, got it today.
Now to transfer music to that damn internal microsd
Edit: Evaluator was right, the FM reception has suffered. Though I can still get FM reception in strong areas, it's nowhere near as good as with the supplied headset. Oh well...It's still great for using as an mp3 player.

I have also purchased this little adapter and it works a treat with my Sony earphones. Radio signal is excellent and sound is phenominal compared to the standard headset.
Phone works properly with the call pickup button and the microphone allows your caller to hear you clearly.
A worthwhile purchase for £9.99 inc postage.

Mini USB > 3.5 Jack?

Any adaptors that will allow me to use proper 3.5 inch headphone jack in place of the mini USB ones ( i dont like the in ear phones) checked ebay and couldnt see anything?

you want get one of these http://www.expansys.com/p.aspx?i=142090 - Mike

Ouch, that thing is both horribly badly designed and prohibitively expensive- it's going to stick out what looks like an inch by itself, most headphone plugs will add another inch on top of that- I need something that fits flush with the bottom of the phone (comes out at a right angle) AND supplies an input for the charger. One can only dream!
The orbit would make a great on-mains Wifi internet radio if such a gubbin existed- hook up some speakers, start TCPMP, sorted!

in which case if you don't like wires stop messing around and get a set of A2DP compatible headphones - the quality is very good, but far more costly than a cable addaptor - the choice is yours - Mike

Might have been worth while if I didn't use an iPod for all my portable audio needs- have you seen any A2DP compatible speakers around?
Looks like there are hacks out there, but no official products, the combination really would just turn the Orbit into an incredibly expensive Wifi radio! But where's the fun in just going out and buying a proper one!

Have a look at the products made by Parrot there are a few Bluetooth audio add on boxes, I fail to see the relevance to WiFi?? as the A2DP profile is Bluetooth - it even works on the T-Mobile MDA-CIII which has no WiFi - Mike

I say wifi radio because I listen to internet radio stations around the house using the Orbit, and the ol' tinternet comes via the wifi doohickey!
A2DP is, of course, a bluetooth profile and would be the method over which I get decent sounding audio from the Orbit to some speakers whilst still having the Orbit plugged into mains so the battery doesn't get sucked dry... that said I think the Orbit will last a good few hours streaming internet radio, although I have yet to put that to the test.
My other solution would be, as mentioned above, an adaptor that allows both the charger AND headset to be plugged in- I can't see this as being technically impossible.
With a brief cursory investigation I have discovered, I think, that the headset uses a proprietary 6-pin connection on the opposite side of the mini-usb connector. The headphones do not use the 4-pin standard mini-usb connector on the other side, but a connector that uses both should be reasonably simple to produce. Ergo it should be childs play for a third party to produce an Artemis dock that contains not only a connection to USB but a standard 3.5mm amplified microphone socket alongside a standard 3.5mm amplified stero audio jack... not to mention a button on the front of the dock for picking up calls and a volume slider if you really wanted them.
Call me crazy, but I want one of those!

You could try this
http://www.expansys.com/htc/p_htc_item.aspx?i=145066
Might do the trick even if it is a bit long
Rich

Dear lord! You've made my day! Hmmm, a little jiggery pokery and I might even be able to incorporate that into a dock but it'll be fantastic for charging and listening to net radio at work- takes that little extra load off my desktop PC.
Cheers!

Glad I could help

richiev4 said:
You could try this
http://www.expansys.com/htc/p_htc_item.aspx?i=145066
Might do the trick even if it is a bit long
Rich
Click to expand...
Click to collapse
Hi,
Does anyone know if the above would work with a set of mini stereo speakers with a 3.5mm headphone jack (like the walkman speakers i used to have, back in the day...) to listen to the FM radio while charging the phone from mains? Or would you still need the headphones plugged into get any FM reception?
Daft question maybe, but I wondered whether the device would just use the speaker wires as an antenna instead of the headphone wires?

It will work fine, I am going to use mine to connect my orbit to my home stereo and charge it at the same time.
Rich

2.5mm 3 pole jack plug
Hi,
Anybody know of an Artemis mini usb to 2.5mm 3 pole jack plug adapter which allows the connection to deliver audio and microphone capability ?
I would like to connet my Artemis/Orbit to the Autocom intercom system on my motorcycle . This uses a lead with a 2.5mm jack plug at the phone end and a 3.5mm jack at the Autocom system end. Both are 3 pole.
Thanks
P.S. hope you don't mind me jumping in your postings

http://www.expansys.com/s.aspx
try doing a search for "2.5mm"

A very good Items for the Artemis on EbaY :
look :
http://cgi.ebay.fr/FOR-ORANGE-SPV-E...ryZ14419QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

2.5mm 3 pole jack plug adatper
I think I've found exactly what I'm looking for at:
http://igonemobile.com/products/html/61315310.html
I've got one on order and I'll let you know if it works.

cegmawr said:
Hi,
Anybody know of an Artemis mini usb to 2.5mm 3 pole jack plug adapter which allows the connection to deliver audio and microphone capability ?
I would like to connet my Artemis/Orbit to the Autocom intercom system on my motorcycle . This uses a lead with a 2.5mm jack plug at the phone end and a 3.5mm jack at the Autocom system end. Both are 3 pole.
Thanks
P.S. hope you don't mind me jumping in your postings
Click to expand...
Click to collapse
Is this so you can listen to music from the Orbit? I've had difficulty on my bike with this...music cuts out and wont restart after phone call is over. In the end, I bought the Autocom bluetooth dongle and now bluetooth the Orbit to the bike. I get phone calls and GPS just fine, but I use a wired iPod for music.

cegmawr said:
I think I've found exactly what I'm looking for at:
http://igonemobile.com/products/html/61315310.html
I've got one on order and I'll let you know if it works.
Click to expand...
Click to collapse
Does this support the Artemis? It isn't in the list....

There was a posting for the mini USB PinOut some Time ago. Look in the wiki Section to find it. Here is what they showed up with.
Maybe This will Help someone to build their own Adapter or whatsoever.
Greetings
Jabami

so what was the general concensus with using Autocom? Did the 2.5mm jack work?
I want to avoid using the bluetooth option on autocom, since I might just as well go for a Scala bluetooth headset instead if the jack doesnt work...

USB FM Transmitter

My car doesn't have a tape player or an aux plug, so the only way to play music in my car is through a transmitter. Currently I have one for my iPod but I'd like to switch over to using it for my phone instead. Does anyone use one of these that can recommend a good one?

If im not mistaken but the usb ports on the evo have no audio going to it.
Just to let you know

i did a quick google search they are a ton of them that plug into the audio jack of the evo.

Doesn't the evo already have an fm transmitter in it..
Sent from my HTC EVO 4G.

yep it does, did somebody figure out how to exploit that and send music to a car radio, im gonna have to look around for that. it'll give me something to do!

BT + FM Transmitter $50:
http://www.amazon.com/Jabra-Cruiser-Bluetooth-Car-Speakerphone/dp/B002PY7P2U/ref=pd_cp_cps_0
FM Transmitter $35:
http://www.amazon.com/gp/product/B003MXM23K/?tag=touchqwerty-20
Option 1 gives you more freedom to be wireless and mobile. But you have to keep it charged.
Option 2 means setting your phone somewhere is going to be awkward unless you have a windshield mount, in which case you're going to have 2 wires dangling off your phone/windshield while you drive. Pick your lesser of two evils, until someone releases an App that lets you transmit music straight to an FM signal from your phone itself (no 3rd party hardware required).

Last I read earlier this week...there is still discussion about whether it really is a transmitter. Then if it is...it is all broadcom and not open source drivers.

I just ordered one of these http://www.bestofferbuy.com/index.php?main_page=advanced_search_result&inc_subcat=1&search_in_description=1&categories_id=&keyword=3.5mm+Male+to+iPod%2FiPhone+2G%2F3G%2F3GS+Female+Adapter+Cable+-+Black+%2895CM-Length%29&x=0&y=0
I already had the fm transmitter from my iphone, so all i needed was a cheap little adapter. All it does is convert the ipod connecter to a 3.5 jack.

hope someone finds out how to exploit built in fm transmitter

Depending on where your auxiliary power plug is located...I like this concept. FM transmitter, phone holder & charges all in one. Seems like it gets very good reviews.
http://www.amazon.com/Advanced-Syst...NDROID/dp/B002UKTABI/ref=cm_cr_pr_product_top

This is what i've been using:
http://www.amazon.com/Belkin-F8M066-Tunecast-Auto-Universal/dp/B000WVVX6W/ref=sr_1_4?ie=UTF8&s=electronics&qid=1280434642&sr=8-4
it works really well and is currently on sale at amazon $21.38 normally $47.91

SilverStone641 said:
This is what i've been using:
http://www.amazon.com/Belkin-F8M066-Tunecast-Auto-Universal/dp/B000WVVX6W/ref=sr_1_4?ie=UTF8&s=electronics&qid=1280434642&sr=8-4
it works really well and is currently on sale at amazon $21.38 normally $47.91
Click to expand...
Click to collapse
I bought that exact one from Target... and returned it the next day. Seems like EVERYTHING interferes, it doesn't let you go under FM88.1, the bass is horrifically BAD, and I get some really crappy signal distortion if my phone is charging while this is plugged in (WTF??)
What I ended up going with is a module that plugs into my XM receiver and gives me a 3.5mm TRS plug, which can either be plugged into my Zune or my phone (or anything...) without having to transmit that signal to a FM station... it's basically straight into the head unit. No more bass issues at all.

I know it isn't what the OP was looking for, but I was looking for something along the same path. I purchased a kit to add RCA inputs to my stock '03 cobra stereo and that worked wonderfully. I had a 3.5mm to rca cable plugged into it so I could listen to Pandora. I was reading about Bluetooth A2DP and was looking for a A2DP to RCA convertor. Found a nice little gem, the Motorola T605 hands free with A2DP. I'm going to order it next month and install it.
http://www.amazon.com/Motorola-T605..._1_1?ie=UTF8&s=wireless&qid=1280501255&sr=8-1

Jack problem

On my WFS jack connector jumps out about 1mm... it is big problem because it stop playing music. WHY? Does somebody have same problem?
Sent from my Wildfire S (root, cwm..)

i used to get this ALOT if i just use my standard headphones directly into the socket. even if it doesn't "pop out", the slightest movement of the headphone jack would cause it to "disconnect" and stop playing music.....VERY annoying.
I managed to "fix" it by simply buying, a cheap as chips headset adapter on amazon. I have no idea why this works, as the plug on the end looks identicle to the one on my headphones, but for some reason, if i use my headphones i get disconnects.....if i use the wired headset adapter then plug my headphones into that it works. no more disconnects.
like i said, no idea WHY this is the case, but it worked for me. i juse bought the cheapest one i could find, i think it was around £2 on amazon.

lapeno022 said:
On my WFS jack connector jumps out about 1mm... it is big problem because it stop playing music. WHY? Does somebody have same problem?
Sent from my Wildfire S (root, cwm..)
Click to expand...
Click to collapse
if your using the original headset, i would do as stated above or:
go back to the shop and ask a refund or repair.
if your using your own headphones:
try using your headphones in other devices (pc, mp3 player) and see if it does the same, if not contact the company where you bought your wfs if you still have warrenty, i would not accept this kind of hardware failure.
good luck with your headphones

GLORIS:
Well, i have Razer Electra headphones... it have support for HTC (mic on wire, 4-pin jack)
JACK ON BOTH, ELECTRA AND ORIGINAL HTC EARPHONES ARE SAME SIZE!!!
my theory: magnetic??? your jack from amazon is magnetic, check this now please
VitanyLTD:
phone is ok, original earphones from HTC connect perfect but others not.
YEP! HTC earphone JACK CONNECTOR IS MAGNETIC, SO WE NEED MAGNETIC 4-pin JACK CONNECTORS!!!!
best will be reduction JACK MALE 4pin to JACK FEMALE 4pin
AFTER THIS I HATE HTC FOR HARDWARE SUPPORT!

Looks my orginal htc headset is not orginal or something cus same thing happening to me.

that's a negative on the magnetism front :s

as I sayd... and headset adapter is magnetic?

no, neither the headset nor the headphones are magnetic. I can genuinely see absolutely no difference between the two plugs, but one works, one doesn't :s

then i don't know.

I to have problems with 3.5mm in car its loose any slight movement will turn off music. i will find an adapter to.

I need JACK 3.5mm 4pin reduction for my headphones.. On cable I have mic...
can somebody find it JACK 3.5mm 4pin male to JACK 3.5mm 4pin female? I can't find anything...

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=110760294384
just ordered this. according to the listing there are 3 in the pack, and that's only around £2.70. So if it works out well, and anyone in the uk wants one I should have 2 spare when they arrive, just let me know if you want one and you can have it. I'll try it out first when they get here though. From the description, it sounds like it takes the 3.5mm 4 pin (with headset) and converts it to 3.5mm 3 pin (normal headphones). So it should be perfect if you don't want use of a mic/headset.
My headset cable adapter works well to be fair, but the extra cable does make thigns a bit unmanageable, so hopefully this adapter will work out a bit better

I had the same problem. After trying different headphones, I decided to take a small slotted screw driver.
Just stick it into the slot and turn it a few times without too heavy pressure and now everything works nice!

wfbml said:
I had the same problem. After trying different headphones, I decided to take a small slotted screw driver.
Just stick it into the slot and turn it a few times without too heavy pressure and now everything works nice!
Click to expand...
Click to collapse
LOL, you should be a doctor... a surgeon man ... just stick your knife in a man without too much pressure, and it works out perfectly ... lol ... or maybe a butcher better

Haha...yeah, that's how I deal with my problems xD
No seriously, I was really worried before I did it but it worked out fine!

those plugs for headphones 'felt' cheap the first time i plugged my headphones... they rly have little something that stops you from plugging propperly so you just roll it few times, i did it with my hp-s...just roll and push a bit... and i smiled just how u did it with screwdriver xD
but the main thing is, that it works... you guys decide: screwdriver or headphones jack xD
Sent from my HTC Wildfire using xda premium

I personally would go for a screwdriver and a hammer...
EDIT: I had that problem with a pair of Creative EP630 in-ear headphones (cheap eBay copy).
Since I bought my Sony MDREX-50LP (guaranteed original) never had that issue.
The sound with Poweramp is absolutely FANTASTIC.

Was so Angry when I first found this problam, I listen to a lot of music. I twisted the Headphone jack a couple of times and Voila!
Thank you Wfbml + b02!
Now I can enjoy my SteelSeries Siberia V2's as well as my Hi-Fi on my WFS!
Yes, I do have the Beats "Mod" Installed.

YES!!!
Sorry for digging up an old topic but I just had to say thank you so much for the screw driver fix : it worked like a charm and I can finally make use of my music again!

M_Nation said:
Sorry for digging up an old topic but I just had to say thank you so much for the screw driver fix : it worked like a charm and I can finally make use of my music again!
Click to expand...
Click to collapse
Dude thanks for digging it up, I've been having the same problem and now its fixed. This should be in the FAQ