Develop Bugs

HTC USB modem driver for Vista 32/64

I offer the driver of the modem for Vista 32/64.
For Vista64 by me it is tested, now I write using it.

connect to mda
When I start the USBModem_dialer.exe on my vista desktop, and want to connect using usb modem, which is succesfully installed. I get a remote access error 692. This means a hardware failure.

Many thanks

The modem driver is great I got it installed and have had no problems with it however after installing it on my laptop running Vista Buisness Edition I am no longer able to sync with Windows Mobile Device Center. When I plug it in all it recognizes is the modem. Any ideas as to what is going on? I would appreciate any info. Thanks in advance.

rboersma said:
When I start the USBModem_dialer.exe on my vista desktop, and want to connect using usb modem, which is succesfully installed. I get a remote access error 692. This means a hardware failure.
Click to expand...
Click to collapse
I too followed the installation instructions exactly, but had Error 692. After extensive web-searching, found the solution. Hope it works for you - it did for me. (But no guarantee!)
http://www.ppcsg.com/index.php?showtopic=78789
On trial and errors testing out various config changes I found that the key cause of my XP popping out the Error 692 is when I disabled Modem Compression at any end whether one and not the other or both (meaning the setting at modem properties in the Control Panel and the modem properties in the Dialup networking sections).
The fact is Modem Compression must be enabled on the Control Panel modem properties for the HTC USB modem and the modem properties in the corresponding dialup networking configuration.
Click to expand...
Click to collapse

For active sync to work disable the modem on your mobile
Thanks, this driver works great for me. Windows Ultimate and QTEK 9100

works for me
Vista Business 32 + Imate JASJAM (Hermes in countries outside AUS)

I love you...
Windows Ultimate x64... UTC Apache (Sprint ppc6700)

anyone have a good vista 32 file'?
i try download and get crc error
thanks

Does anyone know where I can get the same driver but then for Bluetooth ?? I keep on getting the Bluetooth periferal device but an not able to install it...
So we need the HTC Bluetooth Modem driver for Vista

Works great on the Wizard (8125) as well.
Thank you!

htc usb modem Driver
big THX
now I thank can use also again my HTC as modem under Vista

File has been corrupted...
I can't d/l the win32 version... I only get the first 10k. Can the file be restored?

great THX!

I also have a problem downloading the driver. Please restore the link with a new download. I think the old one is corrupted. Thanks in advance

Make sure you "Stop" the Modem from phone first before you connect back for sync
Hi,
Have you make sure the phone Modem is in "STOP" mode? If its still in "START" mode then you will not be able to sync it. I'm using Vista Beta version and it's working fine for me.
Hope that's help .
lentic said:
The modem driver is great I got it installed and have had no problems with it however after installing it on my laptop running Vista Buisness Edition I am no longer able to sync with Windows Mobile Device Center. When I plug it in all it recognizes is the modem. Any ideas as to what is going on? I would appreciate any info. Thanks in advance.
Click to expand...
Click to collapse

Thanks....
file worked like a champ on vista laptop with Cingular 8525. modem and sync, both. Sure am glad for smart guys like you.

Here is the file for vista-32
I found this on this website: http://www.htcwiki.com/page/Use+my+MDA+as+a+Modem

unable to download
magician2007 said:
i try download and get crc error
thanks
Click to expand...
Click to collapse
I also recieved errors on 2 differnet PC's while trying to extract the 32-bit Zip file.
(Win2003-winrar, Vista-builtin zip extractor)
Can soneone else confirm this??

please help about vista Modem driver
I have tried to install the driver but does'nt work properly the device (modem) is indicated in the system properties with an exclamation ; i have a Qtek S100, Windows Vista 32bit. please help me

WM6 and Vista Sync

Hi all.
Finally update my M3100 to WM6 (thanks to LVSM) and i can't connect with my Windows Vista desktop using latest driver from Microsoft.
I can connect with Windows XP box with Active Sync 4.5 without any problem.
Anyone get this working or am i crazy?
Thanks all.

Windows VISTA has a new activesync.
If you connect your device, you should see that Vista auto detects your phone.
But you can't install programs etc.
Then you have to run Windows Update to dowload an additional package, so you
can install programs etc.
So if your Vista ain't that legal, then don't try.

I had installed the XDA Live 0.1 last week without issues (via WinXP)
When I tried to upgrade to the 0.2 it hung in boot loader (tri-colour screen), while using Vista w/ AS4.5.
I had to hard reset to get it to go back to 0.1, but it hasn't really been the same since.
I d/l the new WM6 LVSM and tried to upgrade, but it also hangs in tri-colour mode.
Now is it a problem because I'm running Vista?

1V4NW00 said:
I had installed the XDA Live 0.1 last week without issues (via WinXP)
When I tried to upgrade to the 0.2 it hung in boot loader (tri-colour screen), while using Vista w/ AS4.5.
I had to hard reset to get it to go back to 0.1, but it hasn't really been the same since.
I d/l the new WM6 LVSM and tried to upgrade, but it also hangs in tri-colour mode.
Now is it a problem because I'm running Vista?
Click to expand...
Click to collapse
If I am not mistaking, you can't upgrade with Vista.
There is a workaround for it, but standard it's not possible.
Upgrade trough Windows XP.

vayip said:
If I am not mistaking, you can't upgrade with Vista.
There is a workaround for it, but standard it's not possible.
Upgrade trough Windows XP.
Click to expand...
Click to collapse
Thanks I was thinking i could just use Vista.
I guess I should have just stayed on XP on my primary PC instead of upgrading to Vista so damn quick...LOL

1V4NW00 said:
Thanks I was thinking i could just use Vista.
I guess I should have just stayed on XP on my primary PC instead of upgrading to Vista so damn quick...LOL
Click to expand...
Click to collapse
Well, i expose my complete experience with Vista (of course legal copy )
I have one Qtek 9100 and one TyTN (SPV M3100 Spanish Orange).
days ago both of them with WM5 (original branded)
Yesterday move qtek 9100 to WM6, but can't do with Vista so i do in a VMWare Windows XP box running into Vista with VMWare Workstation (this works very fine). once the 9100 was WM6, Vista says taht the device is new and can't find the driver, but one day before works fine.
So today upgrade my TyTN with the same, put the RUU in the XP box, and works fine, but the same results in Vista and Mobile Sync. Works with SM5 but not with WM6. But in XP box, works with boths.
I think MS checks the OS version in Vista Sync, so you can't sync if the OS version isn't in the list of legal OS mobile.

I am running Windows Vista Ultimate and have WMXL 0.20 on my phone.
I can connect my phone to vista and i can browse my phone. I see the storage card and the internal memory.
You can't install application trough this.
If you want to install application when using Windows Vista, connect your phone with the USB cable, wait for Windows to detect your phone and install the drivers, then run Windows Update.
Then it will download an package so you can install applications.

Windows Vista uses the new Mobile Sync Center hence the RUU cannot connect with your PDA... if you replace the Mobile Sync Center drivers with the activesync ones you can get it to work...
there is a search button on the top right of this forum... as this topic has been discussed and answered many times before i suggest you use the search feature as it works wonders....

I installed Windoes Mobile Device Center on Vista, and I did not have a problem getting it to recognize my hermes w/ XDA-live 0.20. I did nothing special, just plugged it in, it was recognized, I configured it, and it syncs no problem.
Ross

Perhaps is a languaje diference, my Vista is Spanish and my WM6 is english.

jcespi2005 said:
Perhaps is a languaje diference, my Vista is Spanish and my WM6 is english.
Click to expand...
Click to collapse
no language difference... you cannot run the RUU update in Vista!!! jesus man read the posts.... unless you change the Mobile Sync Center drivers you cannot use the updater!!!

walshieau said:
no language difference... you cannot run the RUU update in Vista!!! jesus man read the posts.... unless you change the Mobile Sync Center drivers you cannot use the updater!!!
Click to expand...
Click to collapse
Ok, i dosn't express correct. The question is the conectivity, not so only run RUU, but get acces to device.
With Vista (spanish version) i can't get acces to WM6, and i try two devices, Qtek 9100 and TyTN. a couples of days before both of them were with WM5 and can access without any problem. So i think Vista can read the version my devices says to be and be confused with the driver to use. Were can i find the drivers to make this work. Anyone says i can put activesync 4.5 drivers in Vista, is this correct?
So i must to connect to my XP box into VMWare and access trought this. so i can access and update usgin RUU.
Thanks.

jcespi2005 said:
Ok, i dosn't express correct. The question is the conectivity, not so only run RUU, but get acces to device.
With Vista (spanish version) i can't get acces to WM6, and i try two devices, Qtek 9100 and TyTN. a couples of days before both of them were with WM5 and can access without any problem. So i think Vista can read the version my devices says to be and be confused with the driver to use. Were can i find the drivers to make this work. Anyone says i can put activesync 4.5 drivers in Vista, is this correct?
So i must to connect to my XP box into VMWare and access trought this. so i can access and update usgin RUU.
Thanks.
Click to expand...
Click to collapse
did you download the spanish version of Mobile Device Center or the english version???

walshieau said:
did you download the spanish version of Mobile Device Center or the english version???
Click to expand...
Click to collapse
Spanish. I must wait since installs Vista two weeks for the spanish version of the device center

i have Spanish Vista & Orange M3100 with english WM6 from LVSW. Activesync is working fine using of course the spanish download of windows mobile device center 6.
The only problem i have is that i don't have internet connection connecting activesync by usb.
Does Anyone have the same problem?
Any ideas about my problem?
TIA

fourcc said:
i have Spanish Vista & Orange M3100 with english WM6 from LVSW. Activesync is working fine using of course the spanish download of windows mobile device center 6.
The only problem i have is that i don't have internet connection connecting activesync by usb.
Does Anyone have the same problem?
Any ideas about my problem?
TIA
Click to expand...
Click to collapse
I'm in your same situation.
Im my case, Vista dosn't find the correct driver for my M3100 with LVSW WM6 (perhaps i make a mistake installing, i'll reinstall Vista soon ) In XP box no problem to do that, and gain Internet connection from M3100 to get sync with Exchange server trought Internet.
How do you set the connection in Device Center?

Everything is working fine under vista for me.
I am able to:
-use ICS through USB, PAN
-manage installed programmes
-browse the device
...
I am using an english vista + an english WM6 tytn ROM

Anyone else notice that with XP and Activesync you can see and browse to your Windows folder on the PPC, but through Vista that folder is completely hidden and there seems to be no way to browse it??

m15chief said:
Anyone else notice that with XP and Activesync you can see and browse to your Windows folder on the PPC, but through Vista that folder is completely hidden and there seems to be no way to browse it??
Click to expand...
Click to collapse
You just need to enable viewing of System folders in Folder options

I'm using Vista since the first day and I have updated my TyNT with LVSW ROM and everything works.
Bluetooth activesync / USB activesync / Pairing with Outlook 2007 / Seeing all the files on Main Memory and Storage Card....
All put in one word, everything is perfect.
Only one thing hasn't worked : I haven't been able to update using Vista.

WMDC 6.1 is now available!

Enjoy!
http://www.microsoft.com/windowsmobile/devicecenter.mspx

is it any different to 6.0.6783?

Still installing it, but it's supposed to be the first version to officially support WM6...

Is it just me or does it take ages for files to transfer using wmdc? if i use a £3 ebay purchased card reader its about 10x faster to pop the card in the reader and then put it back in the hermes when file transfer complete. I would have thought it wouldn't make that much difference but then again i don't much about that sort of thing

Wow for once it synced everything to Outlook 2007 thats something it never did before! Nice upgrade i must say

What version of WMDC is showing after your re-install?

Where would i find that? I know it said 6.1 when it installed

Open WMDC...
Click on the ? icon, and then check the "About WMDC..."
Thanks!

6.1.6965 ................

hmmm. 32-bit or 64-bit?

Is it me, or do ROM upgrades crash when using 6.1? I've managed to get ROM flashing working with Vista and WMDC (thanks mrvanx!), but with this update, the update application crashes after the phone goes into bootloader.

32 bit Vista ultimate

bizarre. I've downloaded/reinstalled the 32-bit English version three times, and my version still shows 6.0.6783
grrr

austinsnyc said:
32 bit Vista ultimate
Click to expand...
Click to collapse
Mine installed fine with Vista Ultimate also.
SK

Under Connections dialog: new choice, check or uncheck:
Allow data connections on device while connected to PC
Can get device certificates.
Exact same overall slowness to sync.
Opportunity to get stuff you don't need during driver install on first sync after upgrading to 6.1.

goestoeleven said:
Enjoy!
http://www.microsoft.com/windowsmobile/devicecenter.mspx
Click to expand...
Click to collapse
Thanks for the notice

Thanks for the update.
Q: After installing WMDC 6.1, can we still flash ROM images under Vista? Or do we need to replace the ActiveSync drivers with the 4.5 ones again?

goestoeleven said:
Enjoy!
http://www.microsoft.com/windowsmobile/devicecenter.mspx
Click to expand...
Click to collapse
good to know.
thanks.

goestoeleven said:
bizarre. I've downloaded/reinstalled the 32-bit English version three times, and my version still shows 6.0.6783
grrr
Click to expand...
Click to collapse
Ok, so I eventually got this running (both 32-bit and 64-bit Version 6.1.6965), but it was not a trivial install:
- had to disable firewall and antivirus
- had to uninstall all old versions and patches
- had to remove the device drivers for HTC USB Sync
Only then was I able to get it going (on both machines). Interestingly, I did not have to delete the partnership, but we'll see how today goes...

nbedford said:
Thanks for the update.
Q: After installing WMDC 6.1, can we still flash ROM images under Vista? Or do we need to replace the ActiveSync drivers with the 4.5 ones again?
Click to expand...
Click to collapse
Well, my first test results is you now can use RUUWrapper in Vista using the new 6.1 drivers from WMDC. Theres no need to change to old driver nor disable and kill the wmdc process... good news... i've just flash splash screen now for testing purpose.
I've tried the mtty too, but the port for connecting to PDA while in tricolour isn't in the list. Can someone put the name for the port, to test...i can't remember...
Thanks.

Vista Sync Issues

Hi All, I have a Hermes with WM6 and have just installed Vista Ultimate and am not able to get my Hermes to Sync.
Vista claims it does not recognize the device . . . I have tried via USB & Bluetooth. Any ideas how I can resolve this?
Thanks in advance.

Same thing happen to me the first time what ROM did you use? I just use Fun key rom and everything works great.

Do you have Windows Mobile Device Center installed?

TaurusBullba said:
Do you have Windows Mobile Device Center installed?
Click to expand...
Click to collapse
Even I have wmc6.1 installed, my computer doesn't recognize my Hermes starting from build 1921, it opens it as a storage device only, but no syncing !!, downloading Starbase's ROM right now and will try...

Vista has issues with everything its a pile of *beep*

I am also having similar issues. I just got my new laptop that runs Windows Vista Business and I can get WMDC 6.1 to sync and see the device but it will not load my contacts and calendar onto the latop. Its becoming very frustrating and I'm not sure why it won't sync the data. I'm running the vp3g 3.62 rom on my phone.

Try this...
Click...
Start-> Settings -> Connections -> USB to PC
Uncheck the box "Enable advanced network functionality"
if it is already unchecked, then try checking it. That seemed to work for me when I had problems with WMDC.

Still the same results for me. My phone can connect to the computer... it just won't sync the data.

mercx said:
Still the same results for me. My phone can connect to the computer... it just won't sync the data.
Click to expand...
Click to collapse
+1
vista dont reconize ppc
it say unknow device.
Where we can find the drive?

exactly
festermania said:
+1
vista dont reconize ppc
it say unknow device.
Where we can find the drive?[/QUOTE
I have xda live rom & vista ultimate ... where can I get the driver?
Click to expand...
Click to collapse

Install Windows Mobile Device Center for Vista from Windows Download center. Then everything will work fine. It is my experience.

One thing that might help from my experience:
Take out the microSD card. I had some problems with it inside my phone - no sync. When I took it out everything worked fine! Then I formated my card and problem was solved... don't know what it was all about.

Last month i uninstalled the wmdc and then reinstalled it... i got the connection right but not always...
THen last week i had to reinstall windows and then when i did and update , i got an all new WMDC. This version works fine and good... No issues now...

I have the latest WMDC and have tried everything so far mentioned still and still no sync!?!
Very frustrating.
Any other ideas? Am I missing something really basic.

I have done something right!
After downloading WMDC finally the Jasjam was recognised however when trying to sync the following error occurs:
"Cannot connect with current connection settings. To check your connection settings, select Start, then Settings, then Connections."
So i went to that part of my phone but have no idea what I should be checking!
All help with this is much appreciated (if only things would just work )

Windows Vista...

Happy New Year Everyone.
Alright, i just upgraded to vista and when i plug in my phone it tries to install the driver but cant find them.. So when go into control panel and go to the windows mobile divice center (this replaced activesync....WTF) i little screen pops up and says device connected.. what do i do?

I fixed it for anyone who is having this problem just connect ur device go into control panel windows update and download the updaters!

1Airborne1 said:
I fixed it for anyone who is having this problem just connect ur device go into control panel windows update and download the updaters!
Click to expand...
Click to collapse
Wait i guess that didnt work after all... anyone have any suggestions

this should work, worked for me under vista ultimate and windows 7
http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center.mspx

k ill give it a try im crossing my fingers cause this is the only bad expericance with vista so far. besides it not letting me install windows media player..

It says update could not be installed because at least one windows componet required by windows mobile device center is missing. this is starting to piss me off

whats an alternative to activesync any free download ones? Cause i wanna upgrade my rom soon.