Develop Bugs

Automatch contact in sms

Hi guys, I am appriciated to all of your works. But I just got one question.
Do you know how to enable automatch in sms when you write at "To:" in new sms? ( like wm6)
It is seem to be does not work any more in most of your rom. Its only work in Bepe 0.54 basic.
Thx very much.

etenx500 said:
Hi guys, I am appriciated to all of your works. But I just got one question.
Do you know how to enable automatch in sms when you write at "To:" in new sms? ( like wm6)
It is seem to be does not work any more in most of your rom. Its only work in Bepe 0.54 basic.
Thx very much.
Click to expand...
Click to collapse
its default in ALL of the basic Diamond ROMS. Simple make sure you are typing in the correct name and give it a second.

walshieau said:
its default in ALL of the basic Diamond ROMS. Simple make sure you are typing in the correct name and give it a second.
Click to expand...
Click to collapse
Actually I am using your rom. But it is not working in my Diamond. I dont know why. Do you have any suggestion? Thx
I mean it is not working with keyboard, or resco keyboard pro. ( it is working with phone keyboard, etc...) But the annoying thing is: It auto insert contact after press space do you know how to disable it. THX

etenx500 said:
Actually I am using your rom. But it is not working in my Diamond. I dont know why. Do you have any suggestion? Thx
Click to expand...
Click to collapse
it does work because i just tried it, make sure your contacts are on the phone and not on the sim. also check if you have selected T9 or single input.

Actually I am using your rom. But it is not working in my Diamond. I dont know why. Do you have any suggestion? Thx
I mean it is not working with keyboard, or resco keyboard pro. ( it is working with phone keyboard, etc...) But the annoying thing is: It auto insert contact after press space do you know how to disable it. THX

I have the same problem, it works with the new big kb, but not with the standard old keyboard.

I Just discovered that. The auto-fill( like wm6) was disable by ezinput or xt9. Because when I flash a rom without them. The auto-fill will work. I hope someone can sort it out. THX

What you can do if AutoMatch doesnt work for you is type in the name of the contact or part of the name, click menue and then click check names. Works like a charm.
I never even knew that The diamond had Automatch contatcs in the Messaging system

MichaelMan said:
What you can do if AutoMatch doesnt work for you is type in the name of the contact or part of the name, click menue and then click check names. Works like a charm.
I never even knew that The diamond had Automatch contatcs in the Messaging system
Click to expand...
Click to collapse
Truth but the "automatch" (or auto-fill) is much more convenience

I guess. But convenience is good when its working...lol......plus its only two taps of the screen..at least you dont need to go through 5 or 6 menus like you used to...hehe

Install Kaisertweak, disable xt9 with it, restart device and it all works again with default kb.

dutch64 said:
Install Kaisertweak, disable xt9 with it, restart device and it all works again with default kb.
Click to expand...
Click to collapse
THX SO MUCH. I WILL TRY IT NOW

Spb GPRS Monitor not working...

I just installed SPB GPRS Monitor, selected my GPRS connection from the settings/options panel in the program, pressed ok.
Opened up IE, to do a test view of a web page, but the monitor didn't/doesn't count any kilobytes being sent.
Any advice on how I can fix this, or does the monitor not work on our phones?
Thanks

silicuda said:
I just installed SPB GPRS Monitor, selected my GPRS connection from the settings/options panel in the program, pressed ok.
Opened up IE, to do a test view of a web page, but the monitor didn't/doesn't count any kilobytes being sent.
Any advice on how I can fix this, or does the monitor not work on our phones?
Thanks
Click to expand...
Click to collapse
we need to know:
Your rom, which version of the phone you have, and do you have any other software installed that might be casing a problem.

veyka said:
we need to know:
Your rom, which version of the phone you have, and do you have any other software installed that might be casing a problem.
Click to expand...
Click to collapse
Rom Version: CRCs r11.2
Radio Version: 1.40.30.00
Phone is a AT&T 8525
i dont have any other software installed to monitor the gprs, (nor any running in task manager).
Thx

silicuda said:
Rom Version: CRCs r11.2
Radio Version: 1.40.30.00
Phone is a AT&T 8525
i dont have any other software installed to monitor the gprs, (nor any running in task manager).
Thx
Click to expand...
Click to collapse
Done a soft reset? if that doesn't work, you might want to try a hard one, unless someone else has an idea.

veyka said:
Done a soft reset? if that doesn't work, you might want to try a hard one, unless someone else has an idea.
Click to expand...
Click to collapse
Will try that right now, in the meantime...
CRCs Device Update (is that available as a CAB file somewhere?)
I'm trying to grab some CRCs RingTones, and other goodies available through Device Update.. but DU is not on my phone ..yet

silicuda said:
Will try that right now, in the meantime...
CRCs Device Update (is that available as a CAB file somewhere?)
I'm trying to grab some CRCs RingTones, and other goodies available through Device Update.. but DU is not on my phone ..yet
Click to expand...
Click to collapse
Try updating to 12.11, its a lot faster than 11.2 for me, and I cant find any bugs myself.
(tisnt out there as a cab, no)

silicuda said:
Will try that right now, in the meantime...
CRCs Device Update (is that available as a CAB file somewhere?)
I'm trying to grab some CRCs RingTones, and other goodies available through Device Update.. but DU is not on my phone ..yet
Click to expand...
Click to collapse
Time to upgrade, 12.11 is as good as stable now I believe he told me, so close not funny. What version of SPB GPRS monitor are you trying to run?

zocster said:
Time to upgrade, 12.11 is as good as stable now I believe he told me, so close not funny. What version of SPB GPRS monitor are you trying to run?
Click to expand...
Click to collapse
Re: Original Topic - Just softrebooted, and it works Thx for that!
Upgrade Sounds tempting! If I upgrade will I lose all my settings? (IE HTC Home?) :S

zocster said:
What version of SPB GPRS monitor are you trying to run?
Click to expand...
Click to collapse
SPB GPRS Monitor 2.4.1

silicuda said:
Re: Original Topic - Just softrebooted, and it works Thx for that!
Upgrade Sounds tempting! If I upgrade will I lose all my settings? (IE HTC Home?) :S
Click to expand...
Click to collapse
It's on DU

silicuda said:
Re: Original Topic - Just softrebooted, and it works Thx for that!
Upgrade Sounds tempting! If I upgrade will I lose all my settings? (IE HTC Home?) :S
Click to expand...
Click to collapse
For HTC home, get HRC home customiser and back up your settings. (see FAQ)
Yes, you will lose everything else though.
WM is like windows, if odd stuff happens, reset it till it behaves. glad it worked :d

veyka said:
For HTC home, get HRC home customiser and back up your settings. (see FAQ)
Yes, you will lose everything else though.
WM is like windows, if odd stuff happens, reset it till it behaves. glad it worked :d
Click to expand...
Click to collapse
OK, will backup the configs. (I already have the customizer.. had to change the clock lol)
Thanks much, this is fun
my friend has a HTC Diamond Touch he is selling it because 'it is too complicated' hahaha

silicuda said:
OK, will backup the configs. (I already have the customizer.. had to change the clock lol)
Thanks much, this is fun
my friend has a HTC Diamond Touch he is selling it because 'it is too complicated' hahaha
Click to expand...
Click to collapse
I couldn't live without my QWERTY
Fidderling with WM is fun, once you get going you dont stop!

veyka said:
I couldn't live without my QWERTY
Fidderling with WM is fun, once you get going you dont stop!
Click to expand...
Click to collapse
..in the process of upgrading to latest CRCs rom...
yes, yes i really like the keyboard... i had a QTEK 8310 WM smartphone prior, it was fun, but this is way better... although i tweaked that one pretty well

silicuda said:
..in the process of upgrading to latest CRCs rom...
yes, yes i really like the keyboard... i had a QTEK 8310 WM smartphone prior, it was fun, but this is way better... although i tweaked that one pretty well
Click to expand...
Click to collapse
I came up from a BlueAngel, The screen, and everything on this phone is bliss compared!

veyka said:
I came up from a BlueAngel, The screen, and everything on this phone is bliss compared!
Click to expand...
Click to collapse
Definately a nice change for you too then
What bluetooth GPS receiver would you recommend? I need GPS as I always get lost in Budapest & Belgrade

silicuda said:
Definately a nice change for you too then
What bluetooth GPS receiver would you recommend? I need GPS as I always get lost in Budapest & Belgrade
Click to expand...
Click to collapse
never used it couldn't afford one I hear the star 3 or something ones are good, just, the more sat's it can lock the better.

When I reboot, it gives me a notice
"Connection Setup"
The operator does not exist in the database, please contact your operator for the connection settings.
Connection setup will redirect you to the connections screen.
--why do i get this error notice, and how do i fix it--
Thanks

silicuda said:
When I reboot, it gives me a notice
"Connection Setup"
The operator does not exist in the database, please contact your operator for the connection settings.
Connection setup will redirect you to the connections screen.
--why do i get this error notice, and how do i fix it--
Thanks
Click to expand...
Click to collapse
start/settings/connections connection wizard, option untick enable auto detect or something, your country must not be on the list? Edit what did you download? what version I thought he used the latest connection setup wizard which should detect vancouver?

Input method auto change (choose keybord using stylus)

Hi,
I would like to share with You my little app, that I wrote to make using HTC easier and more comfortable. With this app You can assign finger friendly keybord when stylu is In, and small keyboard for stylus when it is out. Unfortunately it works only on devices with stylus sensor like HD, Diamond, Touch Pro, SE X1 (I hope it works, I've tested with BlackStone only). If you have some suggestions, ideas or if You run this app on other devices please let me know.
You can download it from here (Sorry for my English and google translated page).
I've updated apllication to version 1.1.2
New features:
- support landscape mode
- up to four screen keyboard support
I hope it'll be usefull.

nice app...i'm sure it will help me, as it seams that my touch hd keep changing input keybord completely randomly and with no logic whatsoever so will give a try...hope it will bring an law and order to that mess
dobra robota kolego

Uh... I don't think X1 has a stylus sensor...

ipporek said:
Uh... I don't think X1 has a stylus sensor...
Click to expand...
Click to collapse
So it will not work on SE Sorry.

I've updated apllication. More info at the first post.

hi
hi any screenshots available? does it work like sipchange ? able to auto choose which keypad u want after startup ?

I've attached some screens. During system start, application is checking screen oreintation and stylus state and then deciding which keyboard should be used.

Hi, this sounds very interesting. Unfortunatly the link doesn´t work.
Could you just post it here?
Thx, nearly

Unfortunately link didn't work, don't know why. I 've uploded file here, but remember, the newest version always can be found at http://green-lemon.pl

nitro__67 said:
Direct link http://lemon.byethost15.com/downloadImac112. I would not like to upload to different servers. It 's easier to manage new versions now.
Click to expand...
Click to collapse
Still doesn't work

nitro__67 said:
Direct link http://lemon.byethost15.com/downloadImac112. I would not like to upload to different servers. It 's easier to manage new versions now.
Click to expand...
Click to collapse
Nope, can't download. Would love to try this out, it's a good idea.
Can you supply another download location?
Thanks for your efforts.

Use the link in first posting, deactivate Google translation:
http://lemon.byethost15.com/download/imac
pobierz = download.
Cab attached - will delete attachment, if nitro_67 wants to.

File uploaded.

nitro__67 said:
Unfortunately link didn't work, don't know why. I 've uploded file here, but remember, the newest version always can be found at http://green-lemon.pl
Click to expand...
Click to collapse
Thanks man. It works fine in blackstone.

Link doens't work for me too...
I tried the Cab file above, it really works, meaning it will change the Imput method according to stilus in or out.
But if I closed the phone or make a soft reset, the first time I want to write a message the imput method is still the standard one

You must setup program to start service with Windows.

Do you mean select the option "Run at Start up" ?
Yes I did select it but as I mentionned, after a reset or turning the mobile off, the first message I will write will open with the standard keyboard... I then move stilus in and out and it starts to work correctly until the next reset or turn off

So strange, because program is started. Maybe You are using keyboard which is loaded leter. Uncheck 'run at start' and add shortcut to autostart. After this program should start after all proceses and services.

Good idea, I will have a try...

nitro__67 said:
If you have some suggestions, ideas
Click to expand...
Click to collapse
Hi Nitro, is it possible to launch an application when you take out the stylus? I would love to have Phatpad opened when I do so, to take a quick note.
I won't mind closing it the one time I pull out the stylus in another app.
Hope you can help.

Few unfixed problems in the kitchen

Ok, I decided to write new thread because most of the rom makers I pm to didn't answer me at all. Some kind of secrets or whatever. I think we should help each other to improve our ROM's but maybe I'm wrong.
I have some issues in my owe ROM which I can't really fix. Maybe someone will know the solution
1. Some ROM makers wrote in their changelogs that now CommMgr is really closing without being on the process list all the time? How?
2. I'm using EZinput keyboard 2.0.33633 full qwerty and two keyboards should be available: full qwerty and phone keyboard. Only the first one is present in the system (the second one now is standard MS keyboard instead of phone keyboard 2.0 EZinput). Why? I changed the EXT package many times to make sure it's ok and all the time the same issue...
3. Is there a working method to change system rings to wav? Every time I do it then they doesn't work. Do I have to change also some registry value?
4. Windows Media Player dosen't play any videos. I changed mHub and mHubVO into some other versions but still no efect. What else could be the reason?
That's all what I'd love to know to make my ROM better
Thanks in advice!

Ok, I see that non of the grate, admired here rom makers are going to help me. Sweet. Anyway... I made a little step ahead with problem no2.
I know how to manually switch between those keyboards using registry entries [HKEY_LOCAL_MACHINE\Software\HTC\ezsip]
CurrentSIP set to a00 is Phone Keypad and d00 for fullQWERTY. But still it's impossible to change it in menu (WM6.5 21725)
That's all I want to share with, maybe it will help someone. Should I expect some respond? I don't think so :]

michal_banszel said:
Ok, I see that non of the grate, admired here rom makers are going to help me. Sweet. Anyway... I made a little step ahead with problem no2.
I know how to manually switch between those keyboards using registry entries [HKEY_LOCAL_MACHINE\Software\HTC\ezsip]
CurrentSIP set to a00 is Phone Keypad and d00 for fullQWERTY. But still it's impossible to change it in menu (WM6.5 21725)
That's all I want to share with, maybe it will help someone. Should I expect some respond? I don't think so :]
Click to expand...
Click to collapse
Dude, about the comm manager, I don't know which version of comm manager are u using. But I got my comm manager working good n closing when clicked on x button. All I can say is don't use any new version like 2.8 or topaz comm manager. Use the 2.7.1.4 version. It's OG diamond comm manager n works nice. I'm using the same version.

Thanks buddy Actually I'm using 2.8.1. I will switch to 2.7.1.4 as u said.
The keyboard is still my biggest problem. I wonder what's wrong that I cannot switch between Full qwerty and phone keypad in the sip menu bar.

michal_banszel said:
Thanks buddy Actually I'm using 2.8.1. I will switch to 2.7.1.4 as u said.
The keyboard is still my biggest problem. I wonder what's wrong that I cannot switch between Full qwerty and phone keypad in the sip menu bar.
Click to expand...
Click to collapse
Did u try the GEN Y sip menu..??
I heard someone there saying that if we have the touchflo installed, then only we can change between the phone pad n qwerty board. But touchflo brings some more diff probs elsewhere.
Surprising issue this.. Coz it works perfectly fine with ezinput 1.

My touchflo is completly deleted. All registry entries and app. because in WM6.5 it's totally useless.'
Yes, it is surprising. I checked registry entries and everything seems to be fine... but it's not

michal_banszel said:
My touchflo is completly deleted. All registry entries and app. because in WM6.5 it's totally useless.'
Yes, it is surprising. I checked registry entries and everything seems to be fine... but it's not
Click to expand...
Click to collapse
do u have a package of touchflo..?? If not, I'll mail it to you. Try to import it n see if it works. I had in the previous build of this kitchen.

Yes, I have. Ok, I'll try to cook it with TouchFlo but how is touchflo connected with availability to change keyboard from context menu?

michal_banszel said:
Yes, I have. Ok, I'll try to cook it with TouchFlo but how is touchflo connected with availability to change keyboard from context menu?
Click to expand...
Click to collapse
i dont know..check gen y thread..u will definitely get moe help there. its surely been talked about in that thread.

I think I know the answer. Ability to change between keyboards wouldn't work on wm6.5 without HTC menuenhancement.

michal_banszel said:
I think I know the answer. Ability to change between keyboards wouldn't work on wm6.5 without HTC menuenhancement.
Click to expand...
Click to collapse
nope its not only that, u definitly need the touchflo package, but that package conlicts with wm 6.5
the only thing we can do is wait for HTC to bring out its first WM 6.5 rom for diamond2, then we can take the new touchflo or ezinput package from that rom
about the windows media player issue, make sure u have the DShow OEM in your rom

yozgatg said:
nope its not only that, u definitly need the
about the windows media player issue, make sure u have the DShow OEM in your rom
Click to expand...
Click to collapse
I do have it - DShow_2_0_19141126_0 - or maybe there is some newer? Or older working better?

michal_banszel said:
I do have it - DShow_2_0_19141126_0 - or maybe there is some newer? Or older working better?
Click to expand...
Click to collapse
there a slight newer one in my kitchen, here are the oems i use for multimedia:
- DShow_2_00_19143426_0
- mHub_6_57_080529_E0
- mHubVO_1_75_090515_X0
u should also check the following drivers in OEMDrivers:
- qtv.dll
- qtv_mp4_decoder.dll
try replacing those drivers

Can you please share with all those files? Please
BTW which ConcurrenceMGR are u using? 1_5_19113219_0000?

michal_banszel said:
Can you please share with all those files? Please
BTW which ConcurrenceMGR are u using? 1_5_19113219_0000?
Click to expand...
Click to collapse
just check the link in my signature, i released the full kitchen of my rom

Thanks man!

Ok, it's me again
And again some damn issues in my kitchen
For last two days I was looking for the source of why my Face down mute ring stopped working. In registry everything is fine. Exept of registry, is there any dll library or something responsible for that? Also when I'm in windows file explorere and want to copy the file from IS to main memory (I do tap on "Copy")and then tap on the menu to choose the location then it crashed.
Any ideas for soulution those two problems?
PS. One more thing I forgot... I used to have my clock and calendar to set up automaticly the date and time after HR but now it seems to be gone... Is it up to network type currently using? GPRS/3G? Or maybe some registry value?

michal_banszel said:
Ok, it's me again
And again some damn issues in my kitchen
For last two days I was looking for the source of why my Face down mute ring stopped working. In registry everything is fine. Exept of registry, is there any dll library or something responsible for that? Also when I'm in windows file explorere and want to copy the file from IS to main memory (I do tap on "Copy")and then tap on the menu to choose the location then it crashed.
Any ideas for soulution those two problems?
PS. One more thing I forgot... I used to have my clock and calendar to set up automaticly the date and time after HR but now it seems to be gone... Is it up to network type currently using? GPRS/3G? Or maybe some registry value?
Click to expand...
Click to collapse
Hey Michal,
found something that may help with the face down mute issue
pranavsethi said:
Hi,
Does mute on face down work?
Its not working on mine TD and would be glad if someone can get me to know how to get it working.
Even Checked HKLM, and there is no entry in Phone sector for Face down mute.
Kindly advise.
.............................
Pranav
Click to expand...
Click to collapse
cednicek said:
Try copy reg code from windows mobile 6.1, where it worked... I think i could work.
CODE: HKEY_LOCAL_MACHINE\Software\HTC\PHONE and change FaceDownMuteRing to 0 (default is 1)
Anybody has this problem?
Click to expand...
Click to collapse
Hope this helps

Thanks dude but it doesn't work. I was trying with both, 0 and 1 to make sure but still no effect. Friend of mine checked some others 6.5 ROM's and it seems that it doesn't work in any of them.

I found out that automatic time and date set works only if 3G/SHDPA network is available. So this question is out of date.
If anyone find the solution with face down mute ring then please let me know.
Another issue that I was hoping to solve is contact list popping up every time after SR. So in titanium softkeys registry I changed SK1URL into HTCActionScreen. And now... HTCActionScreen popping up every time after SR. Any solution for that?

X2 update new dialer with video call for X1

Anyone come up with the cab yet?

i want it too

This is what I'm waiting for. But it seems that no-one have it.

hmmm I use the X2 dialer on my X1i and I have the option video call....
I click the call button.
I go to the contacts button.
I search one contact so that I see the numbers.
I select the number I want to call.
I go on "menu" and select the last entry "videocall".

Ok! Goto: http://forum.xda-developers.com/showthread.php?p=4988335#post4988335
First post updated.

zagito said:
hmmm I use the X2 dialer on my X1i and I have the option video call....
I click the call button.
I go to the contacts button.
I search one contact so that I see the numbers.
I select the number I want to call.
I go on "menu" and select the last entry "videocall".
Click to expand...
Click to collapse
BTW can you make screenshot of it ?

Ethermind said:
Ok! Goto: http://forum.xda-developers.com/showthread.php?p=4988335#post4988335
First post updated.
Click to expand...
Click to collapse
thanks dude, but the VTSetup.CAB file isn't available

Now it available ) megaupload too slow )

ok cool, thanks again

last time when I install the new dialer, when using it, I saw a alot of blank options in Menu (it appears as [A], ,.... or something like that) what is this problem? how to fix it?

truelied said:
last time when I install the new dialer, when using it, I saw a alot of blank options in Menu (it appears as [A], ,.... or something like that) what is this problem? how to fix it?
Click to expand...
Click to collapse
may be is not compartible with some soft.
i have no the same problems

Ethermind said:
may be is not compartible with some soft.
i have no the same problems
Click to expand...
Click to collapse
i too noticed that even the video call option but after going tru the menu a second time it was gone with a and b and so on
btw i tried the cabs and the entire task-bar was unresponsive... video call not that important anyway

infact on installing the vtsetup cab, the taskbar becomes unresponsive along with the start menu button. so both programs and settings become inaccessible.

default official ROM already includes VideoTelephony support.
So it is able to install vt x2 only on clead ROM o think
i tested it on custom rom, and taskbar works
but VT call by some reasn doesn't....

As I can see, nor Ethermind, neither Ultrashot, nobody else could make Vulcan Dialer work videocalls on X1. Besides zagito.
zagito, could you explain in details, which ROM do you use, does it include Vulcan Dialer or you installed it by yourself?

Hi,
I've installed by myself on X10 ROM on X1i.

I succeed making video calls on my X1 using X1dialer, that I got here