white screen problem - MDA III, XDA III, PDA2k, 9090 General

I start with saying "Im so stupid"
I try to Expanding the Storage memory and I didn't notice I have dto down grade to WM2003
no I have a wite screen and a dead BA
I tryied to reinstall WM2003 but it got stack
upgrading to WM5 finished but now I have a white screen
does anyone have any suggestions?
please help

Dropped?
Did you drop your device? The white screen from startup to fully booted usually is a sign of the LCD not being atttached properly. Usually, the system starts normally in the backgound while you still have a white screen.
1. Attach your device via the active sync and see if you can connect to the device.
2. If you can connect to it, Read my post here.
http://forum.xda-developers.com/showthread.php?p=1094440#post1094440
Old school fix.

thans but I maneage to solve it
what happened is that I formated the ROM when using WM5
I downgrade it back to WM2003 and formated the ROM to the right size

white screen, please hep
during charging suddenly my XDA IIs suddenly become white screen, but I can connect with Antisync.
Please help, how to solve this problem step by step.
Thank you in advance for advice.
Agus

Did you try this ?
mingwei_sun said:
during charging suddenly my XDA IIs suddenly become white screen, but I can connect with Antisync.
Please help, how to solve this problem step by step.
Thank you in advance for advice.
Agus
Click to expand...
Click to collapse
I had the same problem. and I put up alink above. Did you try it ? Here is the link again.
http://forum.xda-developers.com/showthread.php?p=1094440#post1094440

white screen, please help
I already try follow instruction link your mention, but still can not be done.
thank you, please advice

mingwei_sun said:
I already try follow instruction link your mention, but still can not be done.
thank you, please advice
Click to expand...
Click to collapse
Have you tried Opening it ? There is a PDF link here in the forums which gives your detailed instructions on how to safely dissassemble your Device. Search the forum for it and Ye shall find.
It may be that you dropped it or something happened that your LCD is not functioning properly. Open it up and make sure that all the connections are tight.

dear cyberdrakula,
I can not find the link pdf for safety disassemble device, please give me advice.
Thank you so much.

mingwei_sun said:
during charging suddenly my XDA IIs suddenly become white screen, but I can connect with Antisync.
Please help, how to solve this problem step by step.
Thank you in advance for advice.
Agus
Click to expand...
Click to collapse
I don't know if the problems are the same
but, can you go into bootleader mode? (power + record and SR)
what happen if you soft reset the device?
was the device dropped?
try to use the device for incoming calls? does it works?
best for now

white problem
Thank you for your advice, I try bootloader (Power+rec+Softreset), and now my XDA IIS is coming back normal
thank you

so now... (after done a good did) I can go to sleep with a smile on my face
hope my wife don't think that I cheat on her

Related

help needed / auto restarting

hello!
Can anyone help me with this:
after 5 or 10 minutes, or even at the splash screen, my device automatically restarts and does it for several times.
When i try to put it into bootloader mode i see usb,..... but only for a minute. after that it goes out of bootloader mode and starts the OS again...
So i'm a bit worried that when i flash it, the bootloader mode will go out and the device will try to restart.
Any known sollutions to this problem? Any help would be appreciated!!
ps: no answers in the wiki nor in the forum.
thanks in advance to your replies!!!!!
I think your battery is given up or you have bad connection so that you dont get enough power.
Try first to clean the battery and device connections(best to use contact spray for PCB boards) if doesnt help then you need to have new battery
Thanks for your reply.
I just got it back 2 weeks ago and they installed a new board in it... i made them send it back and fix it (i blamed them)
they also putted french rom and AZERTY keyboard in it so they can fix that to (i had englis OS and Qwerty).
Thx for your post, i appreciate it!
Restarting Problem - PLEASE HELP!!!
Hi
I have an Orange SPV m5000 that I rely on for to carry my contact address book and send text messages (I know other phones would do it but I really like my Uni).
Recently mine has decided that it's going restart itself every few seconds. I have no idea why it's doing this, but the shop I bought it from are not helping me at all.
I've hard reset the device and that hasn't worked so if anyone has any ideas then please let me know, or if you know of anywhere I can send it to be repaired (I'm in the UK).
Thanks in advance
Nick

EXEC stuck and i have tried everything i think

i have an error 120 when i am trying to install rom. and it is stuck in the bootloader.
top of screen has usb and at the bottom has v1.00. I cant seem to go anywhere from here.
please can someone help me i am pulling my hair aout and i dont know what i am doing as i have never been in this situation.
please help me.
DNY80 said:
i have an error 120 when i am trying to install rom. and it is stuck in the bootloader.
top of screen has usb and at the bottom has v1.00. I cant seem to go anywhere from here.
please can someone help me i am pulling my hair aout and i dont know what i am doing as i have never been in this situation.
please help me.
Click to expand...
Click to collapse
Have you completly READ the Wiki?
I´m sure you can find the way to solve your prob there
Good luck
My O2 Exec Got Name Blinking Problem
Hi Frnds
My O2 Exec Not Working Properly...
When I Open Any Folder Or Something The Names Automatically Started To Blink.
My O2 Got Blinking Problem.
Is It Software Problem
I Had Done Hard Reset...but Problem Remain Same
What To Do??
Solve It Out Frnds....
Help Me
Thanks In Advance
DNY80 said:
i have an error 120 when i am trying to install rom. and it is stuck in the bootloader.
top of screen has usb and at the bottom has v1.00. I cant seem to go anywhere from here.
please can someone help me i am pulling my hair aout and i dont know what i am doing as i have never been in this situation.
please help me.
Click to expand...
Click to collapse
GO TO OFFICAL O2 WEB SITE
If you are using Vista, do it on an XP machine. ALL of my problems went away when I updated on an XP machine.
If this is not the case read the WIKI, it takes time but you will eventually get your head around the whole situation.
One last thing, do not give up. Keep trying you'll get it!!

[How To] Flash KS20 Complete Guide + Programms

[How To] Flash KS20 Complete Guide + Programms !!!
OK, I have really grown tired of people "crying" and wasting forum posts asking how to flash a rom, how their device can be recognized in LGMDP etc.
THERE ARE SOME MANY FREAKING GUIDES AND HELPFUL POSTS!
So I have created my own fully(I believe ) understandable guide on how to flash,brand,unbrand phone and restore .nv2 !
You can ask any question you want,nag to me,swear me,etc. I really like helping people!So please do not post in Spocky's or Farah's Threads for how to flash their roms!Everything you need is here!
***I am not responsible if you brick your phone or your dog dies ***
Guide Information:
www.mediafire.com/ibanezman192
If you appreciate my work,you can buy me a coffe!
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=RBB5HSMJGCWGE
great, I will check it out and try it.
Thanks, man.
You are welcome
When flashing my KS20 in emergency mode, after ~10 sec the LGMDP said something about an QCSBL writing error, or somethint li that. I pressed OK too early
Now my phone doesn't work, can't turn it on and no emergency mode. What can I do now?
Take out the battery,insert it and do a hard reset.
help...
hi ...i have a problem with my ks20...i'd installed application from htc, opera browser build for wm6.1 or 6.5...at first it worked but after soft reset my phone dont open anymore...it stock on the bootloader showing lg icon only...is there anyway for me to hard reset my ks20...please help if somebody knew or experienced this....thanks
algabz said:
hi ...i have a problem with my ks20...i'd installed application from htc, opera browser build for wm6.1 or 6.5...at first it worked but after soft reset my phone dont open anymore...it stock on the bootloader showing lg icon only...is there anyway for me to hard reset my ks20...please help if somebody knew or experienced this....thanks
Click to expand...
Click to collapse
1)Wrong thread.Please do not post irrelevant things.
2)Download my guide and you will see how you can hard reset.But I cannot understand why your phone hungs up!I do not think this has to do with opera.I have opera and it works fine.
Help! My LG KS20 is dead!
I have tried searching, but nothing came up.
Yesterday while flashing, it said something timeout (1st time the bar runs across)
Now, I cannot activate emergency mode. I cannot charge the phone. There is no response, no light. Charging the battery full has no effect. Taking the battery out has no effect too.
Is there any way to fix this? My warrenty expired just yesterday
ryanswj said:
Help! My LG KS20 is dead!
I have tried searching, but nothing came up.
Yesterday while flashing, it said something timeout (1st time the bar runs across)
Now, I cannot activate emergency mode. I cannot charge the phone. There is no response, no light. Charging the battery full has no effect. Taking the battery out has no effect too.
Is there any way to fix this? My warrenty expired just yesterday
Click to expand...
Click to collapse
Very strange problem!Maybe your battery is dead Take out the battery and connect the mobile with the pc.If nothing happens then it is not a battery problem.Have you tried a correct hard reset?By saying correct, I mean holding the 3 buttons for many time until the leds flash and then flash out.Then you must release the buttons.
Thanks ibanezman for your reply...
Nope, nothing. Battery is fully charged (I have an external LG charger that was given free).
Nothing happens when I remove the battery and connect to computer. I cannot do a hard reset, because there is no LG logo, and no lights. Not green, red, or blue.
I can't flash in emergency mode, because holding down Internet Explorer and Power gives nothing. No usual green light. Laptop doesn't detect anything. Nothing in device manager.
Today while going through the logs in the LGMDP folder I came across this.
<AppName>Log For Web DownLoad</AppName>
<TIMESTAMP>20090908235324</TIMESTAMP>
<Date>2009-09-08</Date>
<Time>23:53:24.-473</Time>
<IMEI></IMEI>
<TIMESTAMP>20090908235324</TIMESTAMP>
<RESULT>FAIL</RESULT>
Notice there's no IMEI number? Could this mean anything?
ibanezman192 said:
Very strange problem!Maybe your battery is dead Take out the battery and connect the mobile with the pc.If nothing happens then it is not a battery problem.Have you tried a correct hard reset?By saying correct, I mean holding the 3 buttons for many time until the leds flash and then flash out.Then you must release the buttons.
Click to expand...
Click to collapse
I do not think this has to do with IMEI.Maybe you have lost your IMEI in the flashing process.But I believe your phone is dead/bricked
I really cannot feagure out any other suggestions.Maybe you should take it to LG Service.
ibanezman192 said:
I do not think this has to do with IMEI.Maybe you have lost your IMEI in the flashing process.But I believe your phone is dead/bricked
I really cannot feagure out any other suggestions.Maybe you should take it to LG Service.
Click to expand...
Click to collapse
OK thanks ibanzeman. I think i will just let the ks20 go and buy a new phone.
Anyway its old already, and i think i bricked it. Thanks for your assistance anyway!
ryanswj said:
OK thanks ibanzeman. I think i will just let the ks20 go and buy a new phone.
Anyway its old already, and i think i bricked it. Thanks for your assistance anyway!
Click to expand...
Click to collapse
I'm sorry I couldn't help you, good luck finding a new phone!
thanks man. i will give this guide a go!
ibanezman192, thanks a lot for this very detailed guide!
hibjibis said:
thanks man. i will give this guide a go!
Click to expand...
Click to collapse
spuke said:
ibanezman192, thanks a lot for this very detailed guide!
Click to expand...
Click to collapse
The pleasure is all mine New version of the guide is coming tomorrow
erm.. can someone help? my computer doesnt seems to recognise my KS20 during Emeregency mode
I have same problem. On Win 7 64 bit, LGMDP do not see KS20.
What is the message that appears?
Link don`t work
Hi,
I try use the link for download the archive, but the link dot work....
You can fix this??
Thanks
PS: sorry for my english, but i am not very good in this language

Big problem

hi all
i have i-mate pda2. when i updated it and update completed
it stop working , give my only black screen without any words
what can i do plase
amar ali2 said:
hi all
i have i-mate pda2. when i updated it and update completed
it stop working , give my only black screen without any words
what can i do plase
Click to expand...
Click to collapse
have you done the hard reset after flashing?maybe not ryt> if you did try, reflash again...remember hard reset of wm 2003 is different on wm 5 above..
my friend
please can you help me more
i try all ways to restart it
when the update completed the screen become black
and i can't do any thing
and i can't do any update
when i try i found connection error
amar ali2 said:
please can you help me more
i try all ways to restart it
when the update completed the screen become black
and i can't do any thing
and i can't do any update
when i try i found connection error
Click to expand...
Click to collapse
ok..you said you finish the flasing...after that have you perform hard reset?
lets take it one by one..
creso said:
ok..you said you finish the flasing...after that have you perform hard reset?
lets take it one by one..
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=630416
read this from chef tony..if you red it b4..read it again...it will solve your problem 100%
ok
no i didn't hard restart after update
when i finished the phone is be die
plz
my email if you want to talk in messenger for best
[email protected]
[email protected]
i'm online now
thank you too much
i did
i read it
but i can't go to Bootloader Mode and don't see any words on the screen
what can i do more
amar ali2 said:
i read it
but i can't go to Bootloader Mode and don't see any words on the screen
what can i do more
Click to expand...
Click to collapse
do you have full charge of battery before you start the upgrading?
i know that problem
i also had that problem and used to hard reset into bootoptions mode. after that i started via softreset
hope it helps

[Q] Rookie Mistake

Hi I have and IMATE PDA2k EVDO and I tried a d-two rom and I now have the device sitting on the 4 color screen every time I reset it. Any idea how I reset it back to defaults so I can load another image onto it, I have the original image. any advice would be appreciated.
Thanks,
Actually I just fixed it.
Anyone know of any WM5,6 or 6.5 roms that work on this phone. The EVDO network is dead here in Australia so I just want to convert it into a PDA.
For the love of God... if you are going to make a thread saying "Hey guys, I broke this, how do I fix it?" Do not EVER update with "I fixed it!" without telling us HOW you fixed it.
I thought it was such simple fix it did not requiere explaination. To enter the bootloader you do the following
Press Power + record (above the volume slider) + softreset at the same time.
This puts it into the load mode so you can reflash.
problem with my xda iis
hi nid help... i followed the instruction on how to upgrade my ppc but it seems that the download link for win 6 does not exist anymore and now im stock in the boot loader i think the screen only shows "serial and below shows v2.07" i cant use my phone anymore i tried to reset it and emove the battery but stil it only shows serial... hope you can help me guys tnx...godbless
jayreyes_31 said:
hi nid help... i followed the instruction on how to upgrade my ppc but it seems that the download link for win 6 does not exist anymore and now im stock in the boot loader i think the screen only shows "serial and below shows v2.07" i cant use my phone anymore i tried to reset it and emove the battery but stil it only shows serial... hope you can help me guys tnx...godbless
Click to expand...
Click to collapse
about WM 6 rom, maybe you can look at ftp://ftp.xda-developers.com/BlueAngel/Shipped_Complete_Updates/
or at http://shipped-roms.com/index.php?category=windows mobile&model=Blue Angel
try to flashing rom again
You sir are an idiot.
A Blue Angel rom will not work for a Harrier.
So delete your comment because some other idiot will follow your bad instructions then **** up their phone and make another idiotic post.
Yea so did anyone figure out this whole problem with the white boot loader screen? I'm no where near a programmer or anything but I think my boot loader version is out dated. My HARRIER, not blue angel, is stuck at a white screen that reads Serial(USB when connected to usb of course) and v1.02. I've had a Harrier before this and it had the four color screen for boot loader. Am I on to something here?
Oh btw I already tried to reflash the rom over and over but updater keeps saying it can't connect.
jayreyes_31 said:
hi nid help... i followed the instruction on how to upgrade my ppc but it seems that the download link for win 6 does not exist anymore and now im stock in the boot loader i think the screen only shows "serial and below shows v2.07" i cant use my phone anymore i tried to reset it and emove the battery but stil it only shows serial... hope you can help me guys tnx...godbless
Click to expand...
Click to collapse
I have the same problem, anyone found a fix?
yes I have too same problem..plz help
i have a problem
Obviously.
But which one?
Tell us as elaborate as possible.
Problems Blue Angel Harrier Alpine
B-44 said:
Obviously.
But which one?
Tell us as elaborate as possible.
Click to expand...
Click to collapse
Please be careful: This is a Blue Angel (BA) Thread!
As Hima and Alpine Fora are closed, i will try to help as well as possible,
but please post marked "off topic"- hope moderators won't intervene...
And always first work out which device you're talking about.
Still love Alpine...
@admin: I know it's quite impossible to keep all these legacy threads alive- but what about some rescue thread, e.g. for non-touch-screen-phones,the Hima-BA-Family?
As i know from Siemens/BenQ Phones, it has gone silent around here, but from time to time some collectors appear which shouildn't be left alone.

Categories

Resources