I want to shrink the size of the sms messages in a conversation just a bit, how would I go about doing this?
And also, when you open a conversation up, there is only about 15ish messages displayed, and you have to scroll all the way up to get to the 'Older' link, is there a way to make this go faster by also putting the link at the bottom, or is there a way to display more messages per page?
Thanks
PS-Im using Kavanas version of WM6.1 if thats needed
bump (char limit)
I would use the DPI configuration. Here is the link for that CLICK HERE
hi,
i am trying to put together my own sms triggered workflow. for that reason i am looking desperately for an sms-trigger which does not appear in the tray bar.
i have been intensively searching for this for ages and tried all of the apps i was able to find (smstrigger, rk-sms, mortring) but they either do not work or hook into the tray bar.
i hope that somebody can help me out.
What exactly do You want to happen when sms arrive ?
I can make a simple soft not visible in traybar,
BUT it IS visible in Taskbar.
It can f.ex fetch msg-body+Timestamp+Phonenumber from sender.
And perform Shell commands if needed.
hi eurocrypt!
first of all thanks for your help - i really appreciate that.
the minimum what i need is purely to start an exe file as i could do the rest with other utilities.
but what would really help is the following:
set the following flag to the registry
HKCU\System\State\Messages\vmail\Unread\Count = 1
if the sender's number is "#####" or the sender's name is "xxxxx" (if the number is stored as "xxxxx" in contacts)
that's it.
furthermore it would be great to delete exactly this sms with a different parameter perhaps.
My Idea is as follows:
I will make it possible to start the soft with Arguments
\SMSLaunch.exe aaa bbb ccc ddd eee fff ggg
Where
------------------------------------------------------
aaa= The Phone-number/name to trigger SMSLaunch
(Will be filter function, Name or Number Uppercase and removed Spaces and '-')
Like:
Mike Willson As contact Will be triggered if MIKE is Arg.
MIKE as arg will trigger Any Mike calling.
012-123 00 00 As Incoming Nr will be triggered if 01212 is arg.
073 as arg will trigger ANY number beginning with 073.
------------------------------------------------------
bbb= Shellcommand to run (Start app)
------------------------------------------------------
ccc= Arg for above shellcommand
------------------------------------------------------
ddd= Registry-Editing-Entry
------------------------------------------------------
eee= value to set for Registry.
( 1 is static, +1 increase by one, -1 decrease by one)
------------------------------------------------------
fff= Number to reply SMS to
------------------------------------------------------
Number of Arg's will be exact, and must be set by f.ex "X" to indicate
no Action for this Arg.
If needed I can make EDit function fromSoft if Started without Arg,
Textboxes to set ARgs and then Possibility to create A Shortcut with buildin Args.
I´m a bit buzy, so it may take some time to complete this,
hope You have time to wait.
WOW. GREAT!
sure i have time. i have been searching for weeks. so take all the time you need.
i am happy with command line based tool.
instead of textboxes (which might be cool for v2) something like
SMSLaunch.exe aaa /d
to delete the sms would be great.
background for what i use this tool:
i am using homescreen ++ as the only today-plugin. many of the provider in germany do not send a vmail-notice anymore. instead you receive an sms (this can not be changed in your mailbox account settings).
your tool will work as an sms-splitter to seperate vmail-sms from the rest. the process will be to set a registry value to "1" and delete the vmail-sms. homescreen++ will display an icon instead.
i am sure that some more users will be interested in this, too.
A Q!
Is this Reg entry correct ?
HKCU\System\State\Messages\vmail\Unread\Count = 1
I have like this
HKCU\System\State\Messages\vmail\xxxxxx\Unread\Count = 1
where xxxxxx has 4 different entries
Line1
Line2
Total
VoIP
Same in both Omnia and HTC Cruise
I use "Line1" when testing my tool now,
and looks like working OK.
But what about Value, Count=1
Is it automatically go down to Count=0
when listening to Your V-Mails ?
Eurocrypt said:
Is this Reg entry correct ?
HKCU\System\State\Messages\vmail\Unread\Count = 1
I have like this
HKCU\System\State\Messages\vmail\xxxxxx\Unread\Count = 1
where xxxxxx has 4 different entries
Line1
Line2
Total
VoIP
Same in both Omnia and HTC Cruise
I use "Line1" when testing my tool now,
and looks like working OK.
Click to expand...
Click to collapse
reg key same to me.
basically it does not matter which regkey.
you could also use hkcu\software\eurocrypt\vmail
if you want to
Eurocrypt said:
But what about Value, Count=1
Is it automatically go down to Count=0
when listening to Your V-Mails ?
Click to expand...
Click to collapse
superb!
yeah. count =1 if vmail arrives.
can you really do that - vmail to go down to 0 if calling mailbox?
how does the prog know that i am calling my mailbox?
maybe we need to put the number into a special regkey?
if it takes too much time, it is ok to leave vmail=1
i could also reset the value with mortscript.
Progress so far:
I have added possibility to use a SMSLauncher.ini in
same folder as EXE where settings can be specified.
(Easier to config for common guys)
But still possible to use Commandline.
IF SMSLauncher.ini exist, Commandline-Args will be skipped.
It is all working right now exactly as I want it
Though it is not compiled Yet, at work
and coding this toy in my HTC Cruise
Will make a working exe tonight to let You try it.
Also ok now to set VMAIL-Count to 0 if calling Your VMail-nr.
(Using a Phone-object)
Program also checking in SMS.Text for specified Trigger
if not Number/Contact trigged it.
To make it possible to send SMS to do some action
depending on SMS-Text.
Maybe I will add possibility to add sveral Trigger-entries in SMSLauncher.ini
to make it possible to send SMS to make different tasks in Phone.
..................................................................................
Exampel of SMSLauncher.ini
(Use 1 line in SMSLauncher.ini like the one below)
467;X;X;HKCU;System\State\Messages\vmail\Line1\Unread;Count;1;076-11223344;133
====== SYNTAX SMSLauncher.ini ==========
aa;bb;cc;dd;ee;ff;gg;hh;ii
aa= SMS.Number/SMS.Body to trigg SMSLauncher actions
bb= Path to EXE for Shell Command
cc= Argument for Shellcommand
dd= Root For Registry writing
ee= Path to Registry Entry
ff= Registry ENtry Name
gg= Value to set
(1= Allways set to 1)
(+1= Add 1 to existing value)
(-1= Subtract 1 from existing value)
hh= A number to reply Incoming SMS to
ii= Number to Your V-MAIL
(If this is set, Reg-Count will be set to 0)
All positions (9 Pos) must be set,
if no action will be used, set Upper case X
-------------------------------------------------------------------------------
Exampel only Reg change trigged on 123456 and removed Reg-Count on V-Mail number 133
123456;X;X;HKCU;System\State\Messages\vmail\Line1\Unread;Count;1;X;133
-------------------------------------------------------------------------------
When use Commandline instead of SMSLauncher.ini,
use same syntax but replace ';' with a space ' '
in commandline. like this
\Windows\SMSLauncher.exe 123456 X X HKCU System\State\Messages\vmail\Line1\Unread Count 1 X 133
understood. everything is clear. well done.
i have already written my ini-file, directory has been created and everything is prepared to start testing.
this app will eliminate lots of screen tappings.
Hopefully a working version
Read Readme-FIle for exact syntax in SMSLauncher.ini
(9 entries must be inside it, set as Upper Case X
if nothing to do in some section)
2 DLL's must be in same foldeer as EXE-file
Phone.dll + Outlook.dll
It will start with Form Shown,
You have to Minimize it Yourself,
either by getting menu and pick on "Today Scrreen"
or any other available way to do it.
does not work at the moment.
my ini looks like this:
5500;X;X;HKCU;System\State\Messages\sms\Unread;vmail;1;X;5500
have also tried it with
Mailbox;X;X;HKCU;System\State\Messages\sms\Unread;vmail;1;X;5500
sms comes in and regkey still stays at 0
on the other hand your app has started to send out continuously my last sms i have been sending out 6 hours ago
Looks like Your Reg-Path is wrong,
try this
5500;X;X;HKCU;System\State\Messages\vmail\Line1\Unread;Count;1;X;5500
(WATCH OUT! NO SPACES IN MY LINE ABOVE UNREAD with No Space inside)
It is working perfectly for me
Is 5500 the number You call to Your Voicemail ?
Is it also the number from where You got sms to tell You got VMAIL ?
yes 5500 is the number from where i receive the sms from and which is my voicebox number.
i think it is not a good idea to use the reg key above as the os is using this key as well.
if you set the value to 1 you will see a vmail-icon appearing in your taskbar.
just to be sure: it should work with any other reg key, shouldn't it?
Hmm I must have totally missed You :-(
I thought You wanted the soft to make your phone
show You got VMail even though You only have a common
SMS from Your Provider telling You have VMail.
I thought problem was You didn't get
Your Phone to "understand" it was Vmail.
Anyway,
Soft can run any app in your phone (with or without Argument)
trigged upon Incoming Phone-Nr or keyword in SMS.Body.
It can reply Incoming SMS.Body+Nr to
Phone-Number of Your Choice.
It can also set Registry-Key of Your Choice
Same Reg-Key can be set to 0 if You call Nr of Your Choice.
no, you understood me totally right. the only "difference" might be that i am using homescreen++ to handle sms and email notifications. i have even disabled the notification bubbles as they annoy me...
bottom line: great work and support! will test it out tonight
Additional Info ...
If You use SMS.Text for triggering,
Word/Words are Case Sensitive
rgds Eurocrypt
Ideas:
Is there need for more functions..
Also Trigg it on incoming PhoneCall ?
Multiple Lines/Triggers in SMSLauncher.ini
to do different tasks depending on Number/SMS.Text ?
Send SMS to change Parameters ?
(<password:..new config..assword>)
Any other ideas are welcome .
I´m hobbyist Just started to play with this,
so to complex tasks are not possible for me to handle.
i would do the following:
possible to run smslauncher in background, i.e. hidden app so that it does not appear in the task manager (i have configured my device to close all apps when locking screen). in this case we need an extra switch to close smslauncher.
another function might be to delete the sms where smslauncher is set to beactivated. i.e. if sms from 5500 activates smslauncher, your app should execute the command line or set the registry value AND (if an optional switch /d is set) instantly delete the sms.
you could also think about, what you proposed, to make text and sender's name available in a registry key.
a lot of people here e.g those who have put together their own manila style GUI, will thank you for this as there is currently no easy way to display sms/email information on the todayscreen.
Hey,
When I start a new SMS from "new SMS" it's fine but when I reply to SMS', the first alphabet of each sentance doesn't automatically become a capital letter... anyone know how to fix this?
Edit: This is with predictive text off.
I presume it has gone into the Manila part of replying, which unfortunately doesn't support the auto capitalism of letters.
Its only the pOutlook software that supports this and as far as I'm aware, there is no way of being able to change it either, sorry.
aiaob said:
Hey,
When I start a new SMS from "new SMS" it's fine but when I reply to SMS', the first alphabet of each sentance doesn't automatically become a capital letter... anyone know how to fix this?
Edit: This is with predictive text off.
Click to expand...
Click to collapse
As nicelad put it, Manila doesn't support it. Text entry standard can be set by doing this:
Settings > Input > 'Options' tab
Tick 'Capitalize first letter of sentence'.
brynweb said:
As nicelad put it, Manila doesn't support it. Text entry standard can be set by doing this:
Settings > Input > 'Options' tab
Tick 'Capitalize first letter of sentence'.
Click to expand...
Click to collapse
Got that ticked.
Thanks for the quick replies. Back to the shift button then.
Windows is "un-checked" for SMS delivery notification but touchflo does anyway
So i have done a search and most of the results are talking about hot to have sms delivery notification however i do not want sms delivery notification.
I went to messaging options and the option is un-checked however the touchflo 3d on my t-mobile touch pro 2 gives me one anyway.
Any help on how to disable this?
Thanks
All over the other threads.
get a RegEditor [im using CeRegEditor]..
Sent SMS Notification Fix
Found Fix
1. Navigate to: HKLM\SOFTWARE\Microsoft\Inbox
2. Create a new key "Settings"
3. Create a new string value "SMSNoSentMsg" and set the value to 1
Credit to BIGDEE
Hi all,
I want to ask if it is possible to "cook" some special feature to ROM with following functionallity:
I am typing my SMS with XT9 Czech, of course with unicode special characters. I need a fix, which will send the text without these special unicode signs to send it like a normal 160 characters instead of 70 characters SMS.
a) There are some utilities like SMSunaccent but it is a stand alone software which doesnt fit so well with all ROMs (problems with keyboard, etc.)
b) Also dont tell me to switch off the UNICODE selection in the message´s option, because the result is the sms with "?" instead of the special characters.
c) possible solution is to have the XT9 Czech without special characters, but I havent founf any editor of it.
Thank you very much and I will wait for your answer PDA Gurus ...