Develop Bugs

Voice Command Activation on Bluetooth Stereo Headphones

One thing Im loving about this device is the upgraded bluetooth as opposed to my Universal (AKU 3.2). Stereo over bluetooth finally works well now when I'm standing more than one meter away from my device, actually I got it to reach approx. 15m . No more skipping during songs. Im glad that my investment into the HBH-DS970 headphones paid off. Also caller id is working great the headphones.
The only problem I have right now is that I cant initialize Microsoft Voice COmmand from the headset. I've tried the registry hacks that I used on my Exec, as well as a downloaded patch but nothing seems to work. Anyone have any suggestions...

neptune said:
I've tried the registry hacks that I used on my Exec, as well as a downloaded patch but nothing seems to work. Anyone have any suggestions...
Click to expand...
Click to collapse
i also need any opinions on this

neptune said:
One thing Im loving about this device is the upgraded bluetooth as opposed to my Universal (AKU 3.2). Stereo over bluetooth finally works well now when I'm standing more than one meter away from my device, actually I got it to reach approx. 15m . No more skipping during songs. Im glad that my investment into the HBH-DS970 headphones paid off. Also caller id is working great the headphones.
The only problem I have right now is that I cant initialize Microsoft Voice COmmand from the headset. I've tried the registry hacks that I used on my Exec, as well as a downloaded patch but nothing seems to work. Anyone have any suggestions...
Click to expand...
Click to collapse
Bro, What AKU is this Artemis btw? What do you mean upgraded?
Do you hear any high frequency noise while using stereoBT?
Thanks.

MasK said:
Bro, What AKU is this Artemis btw? What do you mean upgraded?
Do you hear any high frequency noise while using stereoBT?
Thanks.
Click to expand...
Click to collapse
The artemis aku is 3.0. The upgraded part I meant that The artemis has bluetooth 2.0 as opposed to 1.2 in the universal. And btw the music quality is pretty good in the headphones. The range has also been improved, I can about 15-20meters before it starts skipping with my sonh headphones

MS voice command error
I've installed MS voice command 1.5 UK OK, but when I try to run it or when the device soft resets I get the error "Voice command has encountered a problem. Restart Voice Command and try again." Restarting or reinstalling does no good.
Has anyone any ideas, I'm lost without it?
Thanks

After doing a hard reset I had a similar problem. It actually works fine for a while but then the error pops up. Maybe a new version of VC is needed for this phone

Sony Ericson hbh ds790 and xda exex
hi all,
i have an xda exec
rom version 1.30.107 wwe
rom date 04/11/06
radio version1.09.00
protocol version 42.42.p8
extrom version 1.30.162 wwe
i really want to get a stereo bluetooth headset and would like to use the sony ericson hbhds950. does anyone here know if it will work? i have spent all day in these forums reading about bluetooth stack and cab files but really am none the wiser. i gues i have to upgrade the bluetooth on my xda to use the hbh ds950 but really don't know how to do it. can anyone help please?

[email protected] said:
hi all,
i have an xda exec
rom version 1.30.107 wwe
rom date 04/11/06
radio version1.09.00
protocol version 42.42.p8
extrom version 1.30.162 wwe
i really want to get a stereo bluetooth headset and would like to use the sony ericson hbhds950. does anyone here know if it will work? i have spent all day in these forums reading about bluetooth stack and cab files but really am none the wiser. i gues i have to upgrade the bluetooth on my xda to use the hbh ds950 but really don't know how to do it. can anyone help please?
Click to expand...
Click to collapse
Bro, this forum is for the HTC Artemis. You might wanna post in the appropriate forum

BLUETOOTH STACK - please please help me

I have read every post about MS bluetooth stack vs widcomm etc....
I know someone can build a cab file that will uninstall the MS one and replace with the newest widcomm stack.
I LOVE my universal but I carry TWO phones with me because the universal's connection via bluetooth is not PERFECT for phone calls like the blackberry (oh i fking hate the blackberry for everything else).
I REALLY REALLY REALLY want to use only my Universal but the static on bluetooth KILLS me because I am on the phone 10 hours a day.
PLEASE please help me. Fish

This file fix Blue Tooth

Bluetooth stack
I would second Fish's comments about the Univerasl and the Bluetooth stack. I have bluetooth in my car and it is great WHEN it works. When it doesn't work it takes a lot of tinkering to get the car to recognize the phone again. I'm of course not sure if the issue is on the Universal side, but Bluetooth turns it self off, so there is some kind of problem. I have tried different radios, currently 1.13 (tried 1.14 as well, but went back). I'm very interested in finding a solution (not using two phones), can you please provide some detail on what the CAB file does to Bluetooth?
Thanks,
Sven

Logout. said:
This file fix Blue Tooth
Click to expand...
Click to collapse
What exactly does this file fix/change ?
I've just installed the WM6 crossbow helmi_c version
do I still need this file ?

This is a Stack changer to change from MS BT stack to Cambridge Silicon Radio BT stack. Originally developed for Dell AXIM (about what I've found). Seems to work fine there, but need to uninstall/reinstall after every soft-reset because of a volume lock bug.
http://www.pocketpcmag.com/blogs/index.php?blog=3&p=392&more=1
http://www.aximsite.com/boards/showthread.php?t=108767&page=1

UPDATE
Do not install this patch yet. It is over a year old.
Follow the development/information on Widcomm BT Stack instead. Following links
http://forum.xda-developers.com/showthread.php?t=279236
http://forum.xda-developers.com/showthread.php?t=285419
http://forum.xda-developers.com/showthread.php?t=285696
http://forum.xda-developers.com/showthread.php?p=1073003

SO this is a different BT stack then the original MS and the widecomm ?

Daelyn said:
UPDATE
Do not install this patch yet. It is over a year old.
Follow the development/information on Widcomm BT Stack instead. Following links
http://forum.xda-developers.com/showthread.php?t=279236
http://forum.xda-developers.com/showthread.php?t=285419
http://forum.xda-developers.com/showthread.php?t=285696
http://forum.xda-developers.com/showthread.php?p=1073003
Click to expand...
Click to collapse
True
reading the posts in the forum he linked:
12-12-05, 09:57 PM
I'd rather go with the widecomm BT

I installed the Hermes Widcomm BT stack on my Universal. Sound is great, but the rest is troublesome. We need a developer to fix the code for us so it works on the UNiversal .
Check my thread in UNiversal/accessories. Or move that thread over here please!

Daelyn said:
http://forum.xda-developers.com/showthread.php?t=285419&page=20
Tried out BT Stack change for Hermes patch/program.
TEST RESULTS ON UNIVERSAL WITH WM6 (Midget aka Helmi unreleased)
Sound IS great. But other than that, this program does not work very well on my device. Of course this is designed for Hermes but I gave it a shot.
Issues:
1:
Screen flickers (only when this BT is turned on).
Flickers really bad and unable to use device.
Fix: set the device to standby (power button) and wake it up again. Flickering gone
2:
Once BT is deactivated for a few minutes I can't start it again.
Fix: No fix found yet. Only a Soft-reset and directly activate BT works.
3:
I can't use my GSM/UMTS connection anymore. Trying endlessly. Even after soft-reset's I can't connect. WiFi works fine though.
Fix: No fix found yet.
4:
Unable to uninstall this program. Tried several times. I get to the "Soft Reset Device Yes/Cancel". I soft reset, program still there and working.
5:
Hard-Reset, complete setup with WAP, MMS, MAIL etc.
Installed Widcomm BT Stack again.
Soft-reset:
Screen flickering (fix)
No 3G/UMTS connection avalible anymore. Even when BT stack is completly shut down.
We need a specific one for our Universal. Who's up to fixing this for us?
KEEPING this post updated.
EDIT 06: 18:40 @ 21/01/07
Click to expand...
Click to collapse
Quoted from my A2DP/AVRCP thread in accessories.

Even with the new WM6 roms - I have tried ALLLLLLLLLL of them the bluetooth phone quality sucks.
I am using the new Pdaviet 2.0.03 (something like that) and i have tried
THREE different headsets
Jabra BT250v
Jabra BT500
Jabra BT500v
All have the same crackly sound issue. But with my blackberry (ass phone, i HATE it) the sound is PERFECT.
I am soooooooooooooooooooooooooooooooooooooo tired of carrying two phones with me - i can not live without my memory (or i mean the universal, which i use as my personal assistant). But my clients can not live with the quality of the phone call connection. Now if I do not use my bluetooth and hold the GIANT universal up to my head (kinda like a military field radio) then the clarity of the call is great.
It is the Bluetooth stack i am 100% sure of it.
OMG Helmi_c let me have your widcomm stack PLEASE I will even pay you for it.

xixfishxix said:
Even with the new WM6 roms - I have tried ALLLLLLLLLL of them the bluetooth phone quality sucks.
I am using the new Pdaviet 2.0.03 (something like that) and i have tried
THREE different headsets
Jabra BT250v
Jabra BT500
Jabra BT500v
All have the same crackly sound issue. But with my blackberry (ass phone, i HATE it) the sound is PERFECT.
I am soooooooooooooooooooooooooooooooooooooo tired of carrying two phones with me - i can not live without my memory (or i mean the universal, which i use as my personal assistant). But my clients can not live with the quality of the phone call connection. Now if I do not use my bluetooth and hold the GIANT universal up to my head (kinda like a military field radio) then the clarity of the call is great.
It is the Bluetooth stack i am 100% sure of it.
OMG Helmi_c let me have your widcomm stack PLEASE I will even pay you for it.
Click to expand...
Click to collapse
try this link
it may help
http://www.pocketpctweaks.com/pocketpc_tweaks/increase_bluetooth_volume
frz

Thanks for the info
I changed the channel in the registry of the device to channel 5 as suggested on that webpage. It was the same quality. I then tried a few other channels and the same results - connection quality still staticy.
Thank you very much for trying to help me though. Fish

xixfishxix said:
Even with the new WM6 roms - I have tried ALLLLLLLLLL of them the bluetooth phone quality sucks.
I am using the new Pdaviet 2.0.03 (something like that) and i have tried
THREE different headsets
Jabra BT250v
Jabra BT500
Jabra BT500v
All have the same crackly sound issue. But with my blackberry (ass phone, i HATE it) the sound is PERFECT.
I am soooooooooooooooooooooooooooooooooooooo tired of carrying two phones with me - i can not live without my memory (or i mean the universal, which i use as my personal assistant). But my clients can not live with the quality of the phone call connection. Now if I do not use my bluetooth and hold the GIANT universal up to my head (kinda like a military field radio) then the clarity of the call is great.
It is the Bluetooth stack i am 100% sure of it.
OMG Helmi_c let me have your widcomm stack PLEASE I will even pay you for it.
Click to expand...
Click to collapse
I'm also worried with the same issue, because I've exactly the same problem. But I don't think only altering of BT stack should fix the problem. My understanding is, something is also to be done in radio (rom) side itself. Because I was using a different radio rom last year at about May or June and my BT headset worked perfect. But I can't remember now about what build that was, because later on I've updated my radio to few other releases.

Radio rom has NOTHING to do with the Bluetooth or Wifi - It's ONLY the firmware for the GSM chip.

xixfishxix said:
Even with the new WM6 roms - I have tried ALLLLLLLLLL of them the bluetooth phone quality sucks.
I am using the new Pdaviet 2.0.03 (something like that) and i have tried
THREE different headsets
Jabra BT250v
Jabra BT500
Jabra BT500v
All have the same crackly sound issue. But with my blackberry (ass phone, i HATE it) the sound is PERFECT.
I am soooooooooooooooooooooooooooooooooooooo tired of carrying two phones with me - i can not live without my memory (or i mean the universal, which i use as my personal assistant). But my clients can not live with the quality of the phone call connection. Now if I do not use my bluetooth and hold the GIANT universal up to my head (kinda like a military field radio) then the clarity of the call is great.
It is the Bluetooth stack i am 100% sure of it.
OMG Helmi_c let me have your widcomm stack PLEASE I will even pay you for it.
Click to expand...
Click to collapse
We know the MS BT stack is crappy. I found out today that Helmi_c is developing one. But, still, this thread should be more about how to resolve the BT stack change (or just shut it until our friend Helmi_c finishes his school stuff and gets back to being the ROM-N3rd in need of more RAM that we all love so much) than bringing up more issues about the MS BT stack.
Thanks.

guys,tried almost all roms on my universal,some of them works a few days,after 3 months i flashed with the good old official rom,better and stable than all
anyway,the only reason for this waste of time was this a2dp issue,being not able to listen music to my motorokr(tested with 2 laptops and 2 htc,working great)
so i think is just some kind of incompatibility motorokr-universal(yes,i try all the a2dp hacks/registry editing found here

WM6 Bluetooth Headset Problem

Hi there I'am new here.... seached the forum and google a lot but didn't find an answer...
Just flashed from XDALive 2.0 to Black 2.0, radio 1.38.00.10 and HardSPL v6 with help of the manual of mrvanx.
My problem with the rom of XDALive 2.0 was that TomTom 6 keep hanging serveral time. The headset (bluetooth build in CAR, peugeot 207) was working perfectly. After the upgrade to Black 2.0 the TomTom problem was solved , it works perfectly now. The only what came up was the bluetooth headset probleem. The connection is ok but I don't hear any sound??
Flashed back radio ROM to 1.35 no results...
Found something interesting...
When its not connect with the carkit, turn on bluetooth, dail a numbers and turn on the Speaker, it will eventually connect to the carkit automaticly (and I got sound thourgh the carkit!
When searching for bluetooth devices it will find the headset and the carkit goes into 'calling mode'. When dailing a contact directly after that the carkit will work. But the next try it will mute the radio but doesn't give any sound on the carkit.
When allready connected with bluetooth on the carkit it wont give any sound thourgh it.... strange.. Tried serveral other ROMS but they are giving me the same problem...
Widcomm BT Stack (http://forum.xda-developers.com/showpost.php?p=1072773&postcount=72) also tried, didn't help... anyone some suggestions?
PS.: My old nokia still works, it can't be the carkit..

Question for you. after you setup your carkit do you go into the bluetooth and set it to your handsfree device. There seams to be a few changes to the way WM6 chooses the handsfree device if you have several set up.
I have to change in WM6 bluetooth which headset I am using when I switch between the 3 headset I have. I have to go to Start\Settings\Connections\Bluetooth Click/Hold on my headset that I want to make active - you will get a Menu wit Edit/Delete/Set as Hands-free/Set as Wireless Stereo (last should be grayed out if it doesn't support Strereo)
Choose Set as Hands-free
After doing this my headset works fine. Try it and see if it works for you.

jcb_home said:
Question for you. after you setup your carkit do you go into the bluetooth and set it to your handsfree device. There seams to be a few changes to the way WM6 chooses the handsfree device if you have several set up.
I have to change in WM6 bluetooth which headset I am using when I switch between the 3 headset I have. I have to go to Start\Settings\Connections\Bluetooth Click/Hold on my headset that I want to make active - you will get a Menu wit Edit/Delete/Set as Hands-free/Set as Wireless Stereo (last should be grayed out if it doesn't support Strereo)
Choose Set as Hands-free
After doing this my headset works fine. Try it and see if it works for you.
Click to expand...
Click to collapse
When searching for a new bluetooth device WM6 sees a headset and the connection is successful. The 'Set has headset' is availible and is set. The option Wireless Stereo isn't support I think, its not availible as an option.
When calling you can turn on/off your headset back to the phone. That works but there is still no sound on the headset.

balck 2.0 does have issues. i also have same with motorola hs850.
only just found out. havent fixed.
bt connects as phone pad shows it.
headset bleeps on connect call and disconnect call. but no sound is sent or received.
always set to headset though not hands free.
will have to test further but definitely an issue. i didnt ask jj out of respect for his withdrawl of support.

I don't think it a problem with Black 2.0. Too many people say it works no problem.
I'm on black and all three of my head sets work like a charm. I have 2 Motos an H810 and a H700 and an Plantronics 510. I also have been able to use internet sharing, BT file transfer, and BT sync with Black 2.0
But it could be an incompatability between the WM6 M$ BT stack and your hands free kits.
Test your phones with another BT device and see what you get.

Same problem with HS850
simon_darley said:
balck 2.0 does have issues. i also have same with motorola hs850.
only just found out. havent fixed.
bt connects as phone pad shows it.
headset bleeps on connect call and disconnect call. but no sound is sent or received.
always set to headset though not hands free.
will have to test further but definitely an issue. i didnt ask jj out of respect for his withdrawl of support.
Click to expand...
Click to collapse
I have exactly the same problem, and I didn't solved yet....but I've found this bypass:
When the phone rings I answer with the bluetooth handset and receive the beeb on connect call.....then I close the BT headset and as soon as I re-open it, I have the headset working.....I have to do this for every incoming or outgoing call.
My BT headset was working well with the black 1.2.
This is the only issue I've found in the black 2.0.....I think is the most stable and fast rom.
Bye prengo.

jcb_home said:
I don't think it a problem with Black 2.0. Too many people say it works no problem.
I'm on black and all three of my head sets work like a charm. I have 2 Motos an H810 and a H700 and an Plantronics 510. I also have been able to use internet sharing, BT file transfer, and BT sync with Black 2.0
But it could be an incompatability between the WM6 M$ BT stack and your hands free kits.
Test your phones with another BT device and see what you get.
Click to expand...
Click to collapse
My other Bluetooth devices are working fine. My bluetooth GPS receiver works just fine with TomTom... no issues there.

Just flashed back to XDA-Live (v0.20.1) and the headset works without any problem.
Only thing now is Tom Tom 6 hangs directly after the start of it. Anyone familiar with this issue?
thx
PS.: what is the differance between the Black 2.0 and XDA-Live (v0.20.1) ? other bluetooth driver versions besides the os version? Maybe there is a way to combine..?

A common thread seems to be the HS850
I have the exact same problem with my HS850. I get the call connect beeps but no sounds come through. The issue exists if the headset is connected when the call is made. If I make the call, then flip the boom and turn the headset on, then I get sounds no problem.
I had this issue with both LVSW 4-08 and Black 2.0. I eventually went back to XDA Live 0.20.1 and my BT issues all went away.

cruzer said:
PS.: what is the differance between the Black 2.0 and XDA-Live (v0.20.1) ? other bluetooth driver versions besides the os version? Maybe there is a way to combine..?
Click to expand...
Click to collapse
WMXL .20 is based on a beta WM6 build and Black 2.0 is built on an RTM build (non-beta)

With Moto HS850 too.
edwinyuen said:
I have the exact same problem with my HS850. I get the call connect beeps but no sounds come through. The issue exists if the headset is connected when the call is made. If I make the call, then flip the boom and turn the headset on, then I get sounds no problem.
I had this issue with both LVSW 4-08 and Black 2.0. I eventually went back to XDA Live 0.20.1 and my BT issues all went away.
Click to expand...
Click to collapse
Exactly the same here with HS850. Tried everything after 20070320_RUU_Hermes_WWE_3.23.0.0_1.34.00.10.exe but kept getting no sound.

I have experienced the same problem with my 407 hands free system. My Orange SPV C600 works without a problem, it does not show signal strength and battery level though. Using my M3100 with any of the following listed below works perfectly:
HTC English QTEK_001 2.11.255.1 03/07/07 2.11.255.102 1.38.00.10 32.71.7020.12H OS 15673.3.3.1 AKU 3.3.1
Cingular English CWS__001 2.15.502.3 04/09/07 ?? 1.40.30.00 32.73.7020.16H OS 15706.3.5.2 AKU 3.5.2
XDA-Live (v0.20.1) English 3.22.110.1 01/04/07 None None 5.1.195 (WM6) OS 17217.6.0.0
I have found all the above roms work perfectly with my TomTom 6.030 software. I am currently using Black Version 2, I have also used LVSW roms and found the same issue with any running the OS 17736.0.2.0

mike6502 said:
I have experienced the same problem with my 407 hands free system. My Orange SPV C600 works without a problem, it does not show signal strength and battery level though. Using my M3100 with any of the following listed below works perfectly:
HTC English QTEK_001 2.11.255.1 03/07/07 2.11.255.102 1.38.00.10 32.71.7020.12H OS 15673.3.3.1 AKU 3.3.1
Cingular English CWS__001 2.15.502.3 04/09/07 ?? 1.40.30.00 32.73.7020.16H OS 15706.3.5.2 AKU 3.5.2
XDA-Live (v0.20.1) English 3.22.110.1 01/04/07 None None 5.1.195 (WM6) OS 17217.6.0.0
I have found all the above roms work perfectly with my TomTom 6.030 software. I am currently using Black Version 2, I have also used LVSW roms and found the same issue with any running the OS 17736.0.2.0
Click to expand...
Click to collapse
It's great that you tracked this down so specifically. I guess this means for those of us with these issues, we have to avoid newer WM6 builds until someone looks into this.

idee2000 said:
Exactly the same here with HS850. Tried everything after 20070320_RUU_Hermes_WWE_3.23.0.0_1.34.00.10.exe but kept getting no sound.
Click to expand...
Click to collapse
Can't just be the ROM as my HS850 works perfectly with Black Pro 2.0

rabdo said:
Can't just be the ROM as my HS850 works perfectly with Black Pro 2.0
Click to expand...
Click to collapse
I have the same problem as the others with my HS850. No audio if the headset is on when a call is made or received but if I close the boom and re-open it, viola it works again.
I did have a problem with HTweakC where I changed the A2DP setting to on and now no matter what I do I can't get it off again. I might re-flash and see if that helps.
I don't know if it matters but I have MS voice command on my phone, even though the MSVC16BThack doesn't work anymore. (my phone is an 8525) Hope someone can figure this out, I really like the speed and stability of this ROM but if I can't get my BT to work I'm going to have to downgrade.

AdamsJourney said:
I have the same problem as the others with my HS850. No audio if the headset is on when a call is made or received but if I close the boom and re-open it, viola it works again.
I did have a problem with HTweakC where I changed the A2DP setting to on and now no matter what I do I can't get it off again. I might re-flash and see if that helps.
I don't know if it matters but I have MS voice command on my phone, even though the MSVC16BThack doesn't work anymore. (my phone is an 8525) Hope someone can figure this out, I really like the speed and stability of this ROM but if I can't get my BT to work I'm going to have to downgrade.
Click to expand...
Click to collapse
I am using Cyberon Voice Commander v2 - maybe that is why it is working for me

Hi,
I am using radio rom 1.40.30 and Black 2.0.
I am using H700 BT headset
the problem i face are opposite from you all.
If i am already talking halfway and i flip the boom to continue talking with the BT headset...it won't work.
if i receive a call and I flip the boom while the phone rings, it is ok and i can even press the button on the h700 to answer the call.
Radio 1.40.30 seems to connect with the BT headset much faster.
last time when i was using my previous default factory rom, when i flip the boom while the phone is ringing, it will take ages to connect
why not u guys try radio rom 1.40.30 also

rabdo said:
I am using Cyberon Voice Commander v2 - maybe that is why it is working for me
Click to expand...
Click to collapse
I did a hard reset, paired the headset, and tried it right away and still had the issue so it's not VC 1.6. It has to be related to the ROM as I have the same Radio ROM for all three OS images and only the XDA Live ROM works correctly.

edwinyuen said:
I did a hard reset, paired the headset, and tried it right away and still had the issue so it's not VC 1.6. It has to be related to the ROM as I have the same Radio ROM for all three OS images and only the XDA Live ROM works correctly.
Click to expand...
Click to collapse
Sorry, what I meant is that perhaps Cyberon Voice Commander is 'fixing' the issue on my system, rather than saying MS VC 1.6 was causing the problem. Next time I hard reset I will test my headset BEFORE installing cyberon software

Ok I'm still having this problem and this is what I have tried so far:
I downgraded to XDALive v0.10 and my BT worked, but no WiFi
So I upgraded to HardSPL v6, then installed the 1.40.30.00 Radio rom, and then went back to Cingular Black 2.0, WiFi back but no BT unless headset is activated after call is initiated.
Installed Cyberon Voice Commander, didn't effect anything, still no BT
Removed Cyberon Voice Commander and re-installed MS VC 1.6 installed all the hacks and still no audio in the headset.
So it looks like it is something in the ROM that is killing the BT functionality. Maybe because the XDALive is based on a beta WM6 and the Black is based on a full version?

Bluetooth carkitt no longer working after upgrade to WM6

A few days ago I upgraded my HTC P3300 to the official WM6 rom.
All works fine except calling using my bluetooth carkitt.
The carkitt I have is the factory carkitt in a Peugeot 307SW. I've read somewhere this carkit is made by Parrot and can also be found in the Peugeot 207, Citroen C4 end some Seat models. Googling showed averyone with those carkitt's has the same problem sinde the upgrade to WM6. It all worked fine in WM5 by the way. I've also tested with several non official WM6 roms, but it's still not working.
Connection and pairing the phone is not the problem. I do see the contact list in my car display and I can even see the battery status. The problem is when I dail. My speakers mute my radio/cd sound, but I don't hear the phone through them. It's just silent. I can't hear the person answering the phone and I don't hear the dial tone. The strange thing it sometimes works. I have the impression it starts to work after I strated tomtom, but I'm not sure about it. What never works is when people call me. The phone rings, but when I answer I can't hear the person on the other side.
Is there any way to fix this? It looks like bluetooth 2.0 isn't 100% compatible with bluetooth 1.1 or it's a bug in WM6. There is no upgraded firmware for my carkitt available and like saif before, a lot of other car owners have the same problem.
Please help.
Rene

renepela said:
A few days ago I upgraded my HTC P3300 to the official WM6 rom.
All works fine except calling using my bluetooth carkitt.
The carkitt I have is the factory carkitt in a Peugeot 307SW. I've read somewhere this carkit is made by Parrot and can also be found in the Peugeot 207, Citroen C4 end some Seat models. Googling showed averyone with those carkitt's has the same problem sinde the upgrade to WM6. It all worked fine in WM5 by the way. I've also tested with several non official WM6 roms, but it's still not working.
Connection and pairing the phone is not the problem. I do see the contact list in my car display and I can even see the battery status. The problem is when I dail. My speakers mute my radio/cd sound, but I don't hear the phone through them. It's just silent. I can't hear the person answering the phone and I don't hear the dial tone. The strange thing it sometimes works. I have the impression it starts to work after I strated tomtom, but I'm not sure about it. What never works is when people call me. The phone rings, but when I answer I can't hear the person on the other side.
Is there any way to fix this? It looks like bluetooth 2.0 isn't 100% compatible with bluetooth 1.1 or it's a bug in WM6. There is no upgraded firmware for my carkitt available and like saif before, a lot of other car owners have the same problem.
Please help.
Rene
Click to expand...
Click to collapse
Same problem here... when upgrade to WM6 official the sound in the car is gone when dailing. Phone is connected but I'am unable to hear anything... everything goes into mute...

I'm stuck with the very same problem. I'll try JetWare and change some configs, but I fear it will not work.
If I have any news I'll post them.
Regards
P.D My car is a Citroen C4, and original Citroen bluetooth I think is a Parrot 3000 or 3100

I have the same problem.
Car kit BT Peugeot 207 and HTC 3300 with cooked room wm6.
I've installed jetware extension. I can hear sound in the first call but when I hang up the next call, the same problem .. no soud.

renepela said:
A few days ago I upgraded my HTC P3300 to the official WM6 rom.
All works fine except calling using my bluetooth carkitt.
e problem.
Please help.
Rene
Click to expand...
Click to collapse
Has anyone found a solution for this? I have found deactivating the bluetooth and reactivating on the call works.
I would hope someone finds a solution. What would be the downside of going back to WM5?? I cannot remember why I upgraded now.....

I finally downgraded to WM5, but I'm interested in knowing if new WM6.1 ROMs have corrected the problem. We have both Blak&Blue and Vanilla versions based on WM 6.1
I've not upgraded to WM6.1 because I'm tired of problems. If someone try to install it, please report
Regards

Alvinillo said:
I finally downgraded to WM5, but I'm interested in knowing if new WM6.1 ROMs have corrected the problem. We have both Blak&Blue and Vanilla versions based on WM 6.1
I've not upgraded to WM6.1 because I'm tired of problems. If someone try to install it, please report
Regards
Click to expand...
Click to collapse
Can you advise me how you downgraded? I have a UK o2 XDA. what is yours? Can you provide the links and instructions for me do get back to WM5

azreal1983 said:
Can you advise me how you downgraded? I have a UK o2 XDA. what is yours? Can you provide the links and instructions for me do get back to WM5
Click to expand...
Click to collapse
Mine is an HTC P3300 locked to local Movistar provider. To downgrade, you must find a WM5 ROM, that's all. I found ART_HTCESN_1.14.412.1_026790_ESN_Ship.exe but it is Spanish, so probably it doesn't interest you.
Downgrade procedure was exactly the same as upgrade.
Would you be so kind to test some WM 6.1 releases with the car's bluetooth before downgrading to WM5?. It could work and I assume that in any case you are going to reinstall everything, so a kick install should be not much of a problem.
Regards

Alvinillo said:
Mine is an HTC P3300 locked to local Movistar provider. To downgrade, you must find a WM5 ROM, that's all. I found ART_HTCESN_1.14.412.1_026790_ESN_Ship.exe but it is Spanish, so probably it doesn't interest you.
Downgrade procedure was exactly the same as upgrade.
Would you be so kind to test some WM 6.1 releases with the car's bluetooth before downgrading to WM5?. It could work and I assume that in any case you are going to reinstall everything, so a kick install should be not much of a problem.
Regards
Click to expand...
Click to collapse
Yeah i would be happy to.
If someone can point me in the direction of what I have to do.
I have a UK o2 XDA, so I assume I would need to unlock it first?

azreal1983 said:
Yeah i would be happy to.
If someone can point me in the direction of what I have to do.
I have a UK o2 XDA, so I assume I would need to unlock it first?
Click to expand...
Click to collapse
Nice!
But I find a problem, isn't your O2-XDA also known as Wallaby? I mean, if I'm right you are posting in the wrong forum or at least you should be advised not to install another PDA ROM on yours becouse you risk to brick it. We are posting at Artemis forum. Of course, Bluetooth problem seems not related to PDAs but WM6
On this forum there is info about how to unlock your PDA. Unfortunately I dont find any ROM for your device.
Regards

Same Problem
hi all,
207 FACTORY KIT / M650
I have the same problem, only the original ROM under WM5 work properly...
I Tried many bluetooth soft on several tips and WM6 release...
AJE , 1.5 / 6 /8 / 9 / 2.0 beta........
Now i am under B&B 5 (WM6.1) and the problem persist
I note that if i desactivate bluetooth stereo and fix sample rate to 44Khz, it looks to work a little better than before.
If i wait between 2 phone call (out), it works much.
If i answer to a phone call with the remote control it never works.
If i answer with green touch on the phone it work ALL the time.
Are we condamned to stay under WM5 !??
WM5 -> bluetooth but no CRM (does'n't want to work)
WM6 -> No bluetooth but CRM...
I choose to work on this but any result, since more than eight month...
HEEEEEEEEEEELLLP US AND SHAME ON PA**OT
PS: HTC and parrot pass a deal to increase compatibility of their product...
Since this time does anybody tel to parrot on this problem ?
Does newer HTC product originaly under WM6 work fine one factory kit (peugeot/citröen 207/C3...) because if no, i think parrot sucks ! they update firmware on all their product, but for product sells to peugeot or citroen -> NOTHING

Thx for the info. It's a pity that the problem persist on WM6.1
We are hooked to WM5 and to my eyes, the Artemis and PocketPCs look older than ever.
At the end, I think it is a Microsoft problem. PSA Bluetooth CarKit works flawlessly with WM5 so Microsoft changed something to the Bluetooth stack on WM6. Shame on them.
I'll wait to WM7, but I don't have too much expectations.
Regards

Some hotfixes are available from HTC regarding bluetooh, only not for the Hermes. damm.
Anyone tried one of these already? Currently still not able to updrade to WM6.1
http://forum.xda-developers.com/showthread.php?t=385128
And one recently for the Diamond..:
6/16/2008
Hot fix for resolving Bluetooth headset sound problem that occurs when reconnecting with HTC Touch Cruise
If you are using the Bluetooth headset, “Jabra JX10”, “Jabra BT500” or “Samsung WEP 150”, and the headset becomes out of range or undetected by the HTC Touch Cruise, in certain circumstances, you may be unable to hear any sound from the headset even after it has reconnected successfully with HTC Touch Cruise. Please install this hot fix to improve the connection when using the above-mentioned Bluetooth headsets.

Bluetooth - Handsfree Devices!

Hello xda community!
I have a huge problem with my Hermes using Shaps Roms (latest), besides I tried all of the roms till now, and bluetooth devices!
I tried 3 devices till now:
Parrot 3200
Audi UHV
and a Sennheiser VMX 100 ear- handsfree
so first I had problems with the Audi to get a stable BT transmission without disconnect which is solved due to a rom change!
Now the problem is with picking up, or dialing.
For example BT -> Audi UHV connected!
Using phonebook to dial a number -> dialing ... it displays in the Audi -> Dialing.. and when the connection is established its shoud says connected like in phone but sometimes just shows "Hanging up.." -> while the Hermes display says connected!
And I am definitly connected to the person but I cant hear anything not on the phone or the BT Kit!
This is extremly anoying -> and not only withe the Audi, even the simple Sennheiser earphone there is exactly the same problem! or the Parrot!
The phone is not able to send correct "commands" Pick UP -> Connected -> Disconnected. I mean THIS IS A HORROR!
Its not a permanent error but it it shows quite often (6 tomes out of 10 calls) up it does it again and again till sofot reset!
Please someone help me !!!!!
PS i also tried Jetware Mobile same problem no difference ....
Greets,
fire

Out of interest, try my ROM and see if this works. I use bluetooth dialing on a car kit and it works fine for me...

CRCinAU said:
Out of interest, try my ROM and see if this works. I use bluetooth dialing on a car kit and it works fine for me...
Click to expand...
Click to collapse
ok, i will give ot a try - first without jhetware mobile and with it!
Is this problem typical or known or just affects me?

Not to sure - although I install a certain version of the BT kit that may affect your issue. I don't know if it will fix it, however I would be interested to see your results.

firefoxy said:
ok, i will give ot a try - first without jhetware mobile and with it!
Is this problem typical or known or just affects me?
Click to expand...
Click to collapse
I have used a number of Schaps ROMS and others, and I have never had a problem making or receiving calls through my car kit (a Ford).
Having said that, I have had probelms getting the car kit to access my contacts on most of them, but Schaps latest ROM worked 'straight out of the box' in every respect.

Hissing Syd said:
I have used a number of Schaps ROMS and others, and I have never had a problem making or receiving calls through my car kit (a Ford).
Having said that, I have had probelms getting the car kit to access my contacts on most of them, but Schaps latest ROM worked 'straight out of the box' in every respect.
Click to expand...
Click to collapse
interesting.. so if you dial a number the tytn sends to your ford the correct status of the calling process ?
start - call - stop ?
never had such issue:
Ford: start - stop
Hermes: start - call ...
silence on both ?

CRCinAU said:
Not to sure - although I install a certain version of the BT kit that may affect your issue. I don't know if it will fix it, however I would be interested to see your results.
Click to expand...
Click to collapse
First results:
15 minutes it works like a charm - no phonebook entries just the plain rom.
now I ll snyc with outlook and start another test!
* Stange thing is that the Audi UHV found my phonebook entries although i dind´t snyced them. Sim is empy ...
can there be something in extended rom ?

Sounds like it uses BT SAP to access the contacts on the phone. I haven't built the ROM with that in it - as I haven't until now come up with a device that actually uses SAP!
Maybe try doing a search to see if you can find a cab for BT SAP and see if that helps?

CRCinAU said:
Sounds like it uses BT SAP to access the contacts on the phone. I haven't built the ROM with that in it - as I haven't until now come up with a device that actually uses SAP!
Maybe try doing a search to see if you can find a cab for BT SAP and see if that helps?
Click to expand...
Click to collapse
First of all thanks for all the replies!!
The Audi UHV is capable to use rSAP, but I have no idea what it does and what it´s good for.
What is the difference between SAP and HFP ? I have nothing on the sim card.

Now you're getting a bit beyond my knowledge as I don't have any of these systems to test or experiment with

+1
I have had the same problems with multiple ROMs.
Trying to link a Garmin GPS, and other Hands Free devices.
Seems like a Hermes thing rather than the ROMs.

Try deleting the BT device from the Hermes, but not the device. Re-sync from the device.
Not sure if that will help, but I had weird BT problems with the 4.30 rom and that fixed it. No problems at all with the 4.31 though.

I will start some testing today and report back tonight!
Maybe it was the rsap being enabled in Shaps roms .... we will see!
The question is, should I install Jetware Mobile or not ?
It seems to be faster in syncing if I have it installed.
So far I tested it yesterday for half an hour and it worked!