G'day
I have been using my XDA2s for 6 months now and the worst thing I have found is switching between different network connections.
When i am on the road I use GPRS, in our offices WiFi, and at home USB, but i have not yet found an easy way to swap from one to another. After I go into Wireless Manager (which i have set to the ie button), i select the method, but still need to go into Network Settings -> Advanced -> Select Networks, and change the connection that the Internet uses.
Am I missing something here, or is this what everyone goes through. I should add that i mainly use the network for ActivSync'ing to our Exchange 2003 Server.
Any help would be greatly appreciated.
Paul
Doesn't sound normal; if wifi is on all the time the manager should intelligently select between wifi if it's available or GPRS if it isn't. USB I don't think is managed intelligently, but I might be wrong there; I don't use it.
Do you have it automatically connecting to unprotected wifi networks? Is the wifi at work encrypted or no? What happens when you walk into the hotspot, does the wireless manager change from GRPS to wifi? Stupid question: Do you keep wifi on all the time?
Chris
Hi
No, dont have it accessing any network in range. This is what i do, let me know if its wrong:
On the road when i want to ActivSync, i go into Wireless Manager, and press the GPRS button, then go into Network Management -> Advanced, drop down the "Internet should connect using" and select the Vodafone-GPRS Settings option. Then open up ActiveSync and Sync. I have noticed, if later on the if i just go into ActiveSync and Sync it connects to the internet without having to go into the Wireless Manager. But if i have in the meantime connected to a Wifi network then it doesnt.
When I go into our offices, i go into Wireless Manager, and press the WLAN button, then go into Network Management -> Advanced, drop down the "Internet should connect using" and select the "My Work Network. Then open up ActiveSync and Sync
In My Work Network, i have nothing setup/ticked except for "This Network Connects to the Internet".
In Vodafone-GPRS Settings I have a GPRS modem (Vodafone) setup, and the "This Network Connects to the Internet" ticked.
Paul
The wireless manager should be switching between wifi and GPRS automatically. I don't use Activesync (I'm on a Mac), so I don't know anything about the syncing.
Try keeping the wifi connection on all the time. When you want to use GPRS, just leave the wifi on (which will have no connection if you aren't jumping between hotspots). Don't go into the manager. The wireless manager should realise there is no active wifi connection and then drop down to using GPRS instead.
Try that, tell me how it goes.
Chris
G'day
I preformed a full backup, then cold reset the unit. After that I just let it auto-configure to Vodafone, an presto it works. Docked, WiFi, and GPRS without having to go into the advance setttings every time. Although I will turn of WiFi after 5mins not being used - cant afford by battery to die (normally use it as a phone for over 3hrs a day).
Thanks again for pointing me in the right direction.
Paul
whenever I want to sign in to msn live messenger, my hermes tries to connect to gprs connection. even when I have free direct access to internet through wifi connection.
I tried everything but it still tries to connect.
Apart from live messenger I can connect to every type of internet service through the active wifi connection.
Is this a bug o the live messenger ?
Is there any newer version that beats this bug ?
I believe that it is a "feature" of WLM that no user actually wants but the network operators are quite happy with and probably had a say in.
Best workaround I know of is to have a network set up with no connections defined, and select that in Settings > Connections tab > Connections > Advanced tab > Select Networks. You may already have a network defined there called "Wifi" (my Orange M3100 did).
If you do that, all apps will be forced through wifi (if enabled), but if you want to use GPRS, you will have to switch the network back.
Anyone know of any apps that will make it quick and easy to change this with a single button click? I hoped that Phoneweaver would have it in the profiles but it doesn't
Disconnect from grps...then sign in to msn... then click cancel when it says "connecting"
unwired4 said:
Disconnect from grps...then sign in to msn... then click cancel when it says "connecting"
Click to expand...
Click to collapse
interesting, it works.
but if I reset, then connect to gprs for any other reason.
and then disconnect.
then it never connects to msn with no gprs connection.
after a reset it works again.
thanks for the workaround...
Hi,
Since AS 4.2 came out I have problems to use USB Internet passthrough in Activesync, als AS 4.5 did not solve this problem. I googled around a lot and also searched in xda forums but everyone is giving other instructions, some say this, some say it the other way. It also does not depend on the rom, I had the same problem on the wizard and now also with my TyTN on wm5 and wm6 roms.
So my question is: How to enable USB internet passthrough on ActiveSync 4.5? At the moment my desktop activesync is set to "automatic" in the connection settings, and on my device under Settings->Connections->Connections->Advanced->Select Networks I have "Orange Internet" as the connection which connects to the internet (which has in the proxy settings "this network connects to the internet" enabled). and the work connection is "My ISP" which has no settings at all. I tried to add a new network connection but didn't even know which Modem I have to choose and so I gave this up.
I also tried to set my desktop activesync to either use "Work" or "Internet" instead of automatic but when I try to use Opera, Internet Explorer or any other program like downloading the weather data all programs say that the host or page cannot be found or report a network error.
Can anyone help with this, I'm really very desperate... Cause I also tried to find the correct settings for hours now, but without luck...
Thanks for any help with this subject.
marcelser said:
Hi,
Since AS 4.2 came out I have problems to use USB Internet passthrough in Activesync, als AS 4.5 did not solve this problem. I googled around a lot and also searched in xda forums but everyone is giving other instructions, some say this, some say it the other way. It also does not depend on the rom, I had the same problem on the wizard and now also with my TyTN on wm5 and wm6 roms.
So my question is: How to enable USB internet passthrough on ActiveSync 4.5? At the moment my desktop activesync is set to "automatic" in the connection settings, and on my device under Settings->Connections->Connections->Advanced->Select Networks I have "Orange Internet" as the connection which connects to the internet (which has in the proxy settings "this network connects to the internet" enabled). and the work connection is "My ISP" which has no settings at all. I tried to add a new network connection but didn't even know which Modem I have to choose and so I gave this up.
I also tried to set my desktop activesync to either use "Work" or "Internet" instead of automatic but when I try to use Opera, Internet Explorer or any other program like downloading the weather data all programs say that the host or page cannot be found or report a network error.
Can anyone help with this, I'm really very desperate... Cause I also tried to find the correct settings for hours now, but without luck...
Thanks for any help with this subject.
Click to expand...
Click to collapse
do you use a proxy server for this pass through connection? what activesync partnership do you have setup "Guest" or a Normal one...
First to be able to use passthrough you must be connected to your PC via USB and thus connected to active sync. Active Sync should be fully set-up.
First question;
Can you synchronize your data through Active Sync 4.5.
If yes. Try to tick all the items in the desktop active sync> connections settings. On the space "this computer is connected to" select automatic
second: Can your PC connect to the internet?
If yes open the PC Internet Explorer and try to browse, then, while connected at USB, open Pocket Internet Explorer in your mobile and try to browse. You should be connected to the internet then. Good Luck!!
If still you wouldnt connect there must be wrong on your Active Sync partnership set-up
Two more tips:
1. Start/Settings/Connections/USB to PC - untic
2. http://pdaphonehome.com/forums/552203-post22.html
no proxy
walshieau said:
do you use a proxy server for this pass through connection? what activesync partnership do you have setup "Guest" or a Normal one...
Click to expand...
Click to collapse
I don't use any proxy server for connecting to the internet, my PC is directly connected to a NAT Router, as well as my linux box and my girlfriends computer and all work perfect.
As for the activesync partnership, where do I see the type of my partnership or in other words, what is a "guest" partnership? The only thing I see is that my device is named "WM_marc1" and that activesync items sync perfectly but the internet passthrough won't work.
I hope you can give me further advice with this information. Thanks for you help
docles2002 said:
First to be able to use passthrough you must be connected to your PC via USB and thus connected to active sync. Active Sync should be fully set-up.
First question;
Can you synchronize your data through Active Sync 4.5.
If yes. Try to tick all the items in the desktop active sync> connections settings. On the space "this computer is connected to" select automatic
second: Can your PC connect to the internet?
If yes open the PC Internet Explorer and try to browse, then, while connected at USB, open Pocket Internet Explorer in your mobile and try to browse. You should be connected to the internet then. Good Luck!!
If still you wouldnt connect there must be wrong on your Active Sync partnership set-up
Click to expand...
Click to collapse
My data synchronizes perfectly through AS 4.5 and I have already checked all items in connection settings. Of course my computer is connected to the internet (see reply to walshieau) and honestly IE and pocket IE have nothing to do with internet passthrough, it's all about TCP/IP subnetting, bridging, tunnelling or whatever method AS 4.5 uses for internet passthrough.
Sorry if i am not explicit...but i hope this helps. For my wizard i remember i had to install a reg on the PC. It did some changes to the Active Sync registry.
The bad is that i don't have that reg
marcelser said:
Hi,
Since AS 4.2 came out I have problems to use USB Internet passthrough in Activesync, als AS 4.5 did not solve this problem. I googled around a lot and also searched in xda forums but everyone is giving other instructions, some say this, some say it the other way. It also does not depend on the rom, I had the same problem on the wizard and now also with my TyTN on wm5 and wm6 roms.
So my question is: How to enable USB internet passthrough on ActiveSync 4.5? At the moment my desktop activesync is set to "automatic" in the connection settings, and on my device under Settings->Connections->Connections->Advanced->Select Networks I have "Orange Internet" as the connection which connects to the internet (which has in the proxy settings "this network connects to the internet" enabled). and the work connection is "My ISP" which has no settings at all. I tried to add a new network connection but didn't even know which Modem I have to choose and so I gave this up.
I also tried to set my desktop activesync to either use "Work" or "Internet" instead of automatic but when I try to use Opera, Internet Explorer or any other program like downloading the weather data all programs say that the host or page cannot be found or report a network error.
Can anyone help with this, I'm really very desperate... Cause I also tried to find the correct settings for hours now, but without luck...
Thanks for any help with this subject.
Click to expand...
Click to collapse
hi, I am using wm6(LVSW series, black Series and now Official Dopod release) on my hermes, everytime I can successfully connect to the internet via activesync using whatever program like pie, opera, spb insight, weather update, WML etc.
what I have done is simply unchecked the 'enable advanced network functionality' under start -> settings -> connections ->USB to PC and then plug the usb cable to my pc.
I use activesync 4.5.
hope this help
ctrlaltdel said:
hi, I am using wm6(LVSW series, black Series and now Official Dopod release) on my hermes, everytime I can successfully connect to the internet via activesync using whatever program like pie, opera, spb insight, weather update, WML etc.
what I have done is simply unchecked the 'enable advanced network functionality' under start -> settings -> connections ->USB to PC and then plug the usb cable to my pc.
I use activesync 4.5.
hope this help
Click to expand...
Click to collapse
YES WORKS UNDER VISTA TOO
simply check the 'allow data connections on device when conneted to the pc' under connection settings and then plug the usb cable to pc.
Heres the Fix
I had the same problem and this reg key fixed it for me 100%
Download this file AND RENAME IT TO lspvalue.reg
the double click on the reg file on your PC
Jules
ZaJules said:
I had the same problem and this reg key fixed it for me 100%
Download this file AND RENAME IT TO lspvalue.reg
the double click on the reg file on your PC
Jules
Click to expand...
Click to collapse
That's the one i was talking about, thanks i was going to need it too
Ok followed the procedures. I think anyone of them works. Mine worked by changing on PC activesync to "this computer is connected to: The Internet". Nothing else worked. I had the reg hack from the time of my beloved Wizard!
go to:
start -> settings -> connections -> advanced -> select network
make sure that
"programs that automaticaly connect to the internetshould connect using"
"my work network" and not "my isp"
then go to
start -> settings -> connections -> usb to pc
and make sure to uncheck "enable advanced network functionality"
that should do it
regards
H.S.
hsalah72 said:
then go to
start -> settings -> connections -> usb to pc
and make sure to uncheck "enable advanced network functionality"
that should do it
regards
H.S.
Click to expand...
Click to collapse
on my hp 6828, it doesnt seem to have the usb to pc option/icon.
tried the first part selecting connect to work.
I'm stil haveing a problem. any ideas?
maymaymay said:
Two more tips:
1. Start/Settings/Connections/USB to PC - untic
Click to expand...
Click to collapse
This one works for my TP
Goshh... I love this board !!
Thank you very much, maymaymay
Still not working
Why can't someone come up with an ACTUAL solution to this?
When I connect my Tilt to the PC it automatically passes the internet connection through the PC. I did the registry fix and tried all four settings (0, 1, 10, 11) and still my data connection on the phone is overridden by the active sync desktop pass-through. I turned off the advanced networking option and still it goes through the PC. I even went through all the settings in active sync for "This computer is connected to" even though that doesn't even look like it would affect which connection my phone uses. This seems more like a setting within active sync on the phone more than anything.
I use my phone at work for chatting on yahoo IM (with Palringo) since my company network is filtered. I use a program called MyMobiler to transfer the phone display and controls to the PC so I can use my desktop keyboard for the chat program instead of my phone's keypad. Since the network is filtered the internet connection on my phone is filtered too since it's passed through the desktop when I active sync it to use MyMobiler. Sometimes Palringo will hold the connection even after I've connected to the desktop and sometimes it won't.
Bottom line here is can someone come up with an real working solution to this problem that a LOT of people are having?
HOW TO DISABLE DESKTOP PASSTHROUGH WHEN CONNECTING WITH ACTIVESYNC. Search that on google and here and all you will find are people saying "Yeah I have that problem too" or people telling how to connect WITH desktop passthrough.
I have a similar issue. I have my phone connected to my work PC to charge / sync, but all Internet connections attempted by the phone are being routed through my work network until I unplug the USB.
Naturally, that's very bad since all Internet traffic is logged by my work and many sources are blocked. I have an unlimited data plan on my phone. Why can't I stay connected to it when I'm hooked to ActiveSync?
I read someplace that Windows Mobile has an order of preference where connections are concerned. Probably hard line, then wi-fi, 3G and then EDGE. Surely there must be some way to modify this order of preference.
The thread is missunderstood...
The problem here is give to the PPC internet via usb... providede by a PC...
The solution that REG (that works for me EVER!!!).
And now other one provide internet to my PC via usb on phone account
With apologies, I'm not sure I understood what you said there.
But, some of us are actually trying to stop receiving internet by the USB.
I would like the phone to initiate a wireless 3G connection even when connected to the PC. But, thus far, all settings I've tried still cause my phone to attempt to access my business network here at my company.
Big no-no.
have you finally solved the problem?
If so just like to ask if you have change your homepage in ppc? which is
file://windows/default_0409.htm?
and have not run your network wizard? then maybe I have the solution here
Reg key
HKEY_LOCAL_MACHINE\Software\Microsoft\Internet Explorer/AboutURLs/
usually it is ( default value )
A.Blank value is res://webview.dll/blank.htm
B.Home_0409 value isfile://windows/default_0409.htm
C.version_0409value isfile://windows/default_0409.htm
if there is a new reg in that one try to delete that file again using a registry explorer ( depends on what you use to view the file)
turn it off for about 30 secs then soft reset... I hope this helps out
I'm not sure that addresses the issue, or mine at least. My phone disables HSDPA the moment I plug the USB cable into the phone and Active Sync takes over. It's before I even open a browser.
Not only does the phone start looking for Internet over the USB Active Sync connection, it looks for non browser related things like weather updates and sending mail to the gmail server.
Somewhere, it's coded to have an order of preference in what kind of connection it accesses. By default, it seems to look for any available land line connection, possibly wi-fi next, then 3G and then EDGE. I'd like to take the land line connection completely out of the equation.
I have never had this problem before and whilst I am not the most technical, I am a long time user of pocketpc's.
When I try to connect to the internet whilst cradled, it tells me this connection cannot connect to the internet. So I go into the connection settings of "My Work Settings" and find the "this network connects to the internet" checkbox is cleared. So I tick it. My network does not have a proxy, so I leave that clear.
I go and try to connect again and get the same. I go back to the connection settings, and the checkbox has cleared again. It doesn't matter how many times I go back and set it, it keeps clearing.
I have tried creating a new connection, still clears. I have tried setting a proxy for SOCKS but not the others...doesn't clear it (the proxy checkbox seems to force the "this network connects to the internet" to stay) but I can't connect because it is looking for a proxy in the https (or so I assume).
Any help greatly appreciated, thanks
I too have this (Athena WM6).
I have a GPRS connection for internet, and a VPN connection for my work network.
I would like to be able to connect to both work and internet via wifi.
Ideally it should be possible to select whether a particular Wireless SSID is work or roaming, but also allow access to the internet from the work network.
Sorry I was mistaken in subject
Can it have something to do with syncing, since your device is in the cradle.
I'm having this issue as well on my Wizard WM6.
Hello
I have been using wifi internet on my phone for some time. And it has been running fine.
I had a Sattelite connection instead of a landline Dsl. But recently I switched to Dsl and the phone doesn't connect to the internet anymore. It does connect only for a few minutes sometimes in a day whenever it wishes to otherwise there is no connection. The wifi icon at the notification bar shows complete signals, the wifi finder easily finds the network but there is no connectivity. When I go to my university I can connect easily. So probably the problem is with the landline connection. Is there anyway to manually connect to this connection?
If it finds the network, but can't connect, you're not likely to have any luck by setting it up manually. But if you want to try; open "Settings", click "Wireless & Networks", click "Wi-Fi settings", turn on Wi-Fi, click "Add Wi-Fi network", enter the network's name where it says "Network SSID", choose the security type, enter the password. If you don't know what to fill in, ask someone around you who would.