Got settings for T-mobile UK anyone fancy making a cab? - 8525, TyTN, MDA Vario II, JasJam ROM Development

Got my new Vario2 (Hermes yesterday) Straight backonto the forum after a long departure and instantly started playing with Mobile6 thanks to all the fantastic programmers on here. Only issue was having to reload al the gprs and mms data each time. After a long search on the tmobile site I found the following instructions for the UK network.
If anyone with the know how wishes to make a cab that can be installed easily each time I re-flash that would be highly appreciated and I'm sure some others will find it of use too.
Thank you in advance to any takers
How to configure Picture Messaging on your T-Mobile MDA VarioII
Setting up your connection
1. Select the Start menu and then Settings
2. Select the Connections tab
3. Select the Connections icon
4. Select the Advanced tab
5. Tap on Select Networks
6. select the button New… .immediately beneath the network drop down box and
follow the remaining instructions below to set up an internet connection
7. In the box Enter a name for these settings enter T-Mobile Internet
8. Select the Modem tab
9. Select New
10. In the box Enter a name for the connection enter T-Mobile Internet
11. Under the second drop down list Select a modem select Cellular Line (GPRS)
12. Select Next
13. In the box under Access point name enter general.t-mobile.uk
14. Select Next
15. In the box Username – leave blank
16. In the box Password – leave blank
17. Select Finish
18. Select ok three times
19. Tap on x to close the Settings screen
Setting up your Picture Messaging profile
1. Select the Start menu and then Messages.
2. Select Messaging
3. Select Menu and Tools then select Options
4. Tap on MMS
5. Tap on the Servers tab.
6. Tap on New.
7. In the box Server name enter T-Mobile MMS
8. In the box Gateway enter 149.254.201.135
9. In the box Port number enter 8080
10. In the box Server address enter http://mmsc.t-mobile.co.uk:8002
11. Select the Connect via drop down list and select your internet profile (T-Mobile Internet or T-Mobile GPRS
(Web))
12. Select the WAP Version drop down list and select WAP 2.0
13. Select OK
14. With T-Mobile MMS highlighted, tap on Set As Default
15. Select ok
Your phone is now ready to send picture messages.

PLEASE search the forums, there is a program in progress (very nearly finished) which will apply the settings for ANY network. You will find the thread here.

Related

'Rogers' MMS on O2 Xda IIs?

Does anyone know how to setup MMS on this device?
I'm using Xda with Rogers Wireless (cellular service provider) in Canada. I know that I have to subscribe to their MMS service, but they won't support my device and I have to figure out how to set it up myself.
Can ANYONE help? Step-by-Step?
Also, does MMS use GPRS to send/receive MMS message? Or is it the same as TEXT messaging.
REALLY appreciated!
Many thanks for even taking the time to READ this message!
Dear Guinness
PLease find the manual configuration for MMS on XDA IIs.
• Tap "Start > Settings > Connections Tab > Connections"
• Tap "Select Networks" in "Advanced" Tab
• Tap "New…" to create a new Connection Settings
• Enter your "Operator name" : ... "General" Tab. (e.g. O2)
• Go to "Modem" tab. Tap "New…" to add a Connection
• Enter the Connection name : MMS and select the modem type. If you are using GPRS please select "Cellular Line (GPRS). Tap "Next".
• Enter the Access point name (if using GPRS) : (operators apn) . Tap "Next"
• Enter the User name : (check from operator) and Password : (check from operator).
• When you finish, you will see the following screen. A connection named " MMS" is added. Tap "OK" to save and exit.
• Click Edit my proxy server, click the 2 check boxes and enter Proxy Server: (check from operator) and click advanced.
• Enter HTTP prot as (check from operator)
• Enter WAP server as (check from operator) and Port (check from operator). Click OK.
• Tap "Start > Settings > Connections Tab > GPRS settings
• Select: PAP authentication, click OK
• Run the MMS Composer. (Tap "Start > Messaging > scroll and take MMS)
• Tap "Tools, MMS settings…"
• Connect Via: Click the box to scroll down and select the MMS profile you created.
• Go to Servers, edit the existing server or create new.
• Enter the Server Name : MMS , Gateway: (check from operator), Port: (check from operator) and Server Address check from operator)Tap "OK" to save.
• A new Server setting is added
• Tap "OK" to save and exit.
Well usually MMS wrks with GPRS in the background, so it is via GPRS, EDGE or 3G
Hope this helps
This is the information I gor from Rogers Tech Support today... but I am STILL unable to get things to work!
MMS Settings for Rogers
-----------
Name: Media
Homepage: http://mms.gprs.rogers.com
Security - On
Bearer - GPRS
Connection Type - Permanent
Lock Status -Unlocked
Authentication Type - secure
APN - media.com
IP- 172.025.000.107
user -media
pass- mda01
login tupe - AUtomatic
Lock set v - YEs
And someone else, on another site, said to try the following settings, but it STILL didn't work. Here's what they sent me...
1. go to Start-> Settings, choose the Connections tab, choose Connections, then click on the “add a new modem connection” link.
2. call the connection Rogers Internet, and select the Modem as Cellular Line (GPRS). Press Next.
3. Access Point Name, internet.com if you are on Rogers. Press Next.
4. User name and password are wapuser1/wap if you are on Rogers. As for domain, 208.200.067.150 for Rogers. Press finish.
5. add another connection, and call the new one Rogers MMS, Cellular Line (GPRS) modem. Press next.
6. Access point name, media.com if you are on Rogers. Press next.
7. User name and password are media/mda01 for Rogers. As for domain, 172.025.000.107 for rogers. Press finish.
8. go to start -> Messaging, Tools menu on the bottom, MMS Settings.
9. in the preferences tab, connect via “my ISP.” Go to the servers tab.
10. press New, for Server Name type in Rogers MMS, Gateway 172.025.000.107 for rogers, port number is 9201, Server Address is http://media.com for Rogers. Press OK.
11. set the new account you’ve just set up as default, then delete the default account.
12. you’re done!

In need of o2 exec settings cab from Ext rom does anybody have them?

Hi i need the o2 GPRS etc settings installer thats hidden in the ext rom i cannot make it visible so if u have the cab could you please mail me or let me know cheers
its the one were u choose coporate/personal etc thanks!
Dont know if your on PAYG or contract, these are for contract - got them from O2 - they work ok for me
stevef1
###########################################
O2 XDA Exec GPRS WAP Pay Monthly Settings':
###########################################
1. Tap Start
2. Tap Settings
3. Tap the Connections tab
4. Tap the Connections icon
5. Under 'My Work Network' tap 'Manage existing connections'
6. If a connection already exists then tap ‘Edit’. If no connections are present tap 'New’
7. In the ‘Enter a name for the connection’ field enter ‘GPRS WAP’
8. The 'Select a modem:' drop-down box should be set to 'Cellular Line (GPRS, 3G)'
9. Tap 'Next'
10. In the ‘Access Point Name’ field enter ‘wap.o2.co.uk’
11. Tap 'Next'
12. In the ‘Username’ field enter ‘o2wap’
13. In the ‘Password’ field enter ‘password’
14. Leave the Domain field blank
15. Tap ‘Advanced’
16. In the ‘TCP/IP’ tab ensure ‘Use server-assigned IP address’ is selected
17. Tap the ‘Servers’ tab
18. Ensure the ‘Use server-assigned address is selected
19. Tap ‘OK’ in the top right corner
20. Tap 'Finish'
21. Tap 'Proxy Settings' tab
22. Ensure that 'This network connects to the Internet' box is ticked
23. Ensure that 'This network uses a proxy server to connect to the Internet' box is ticked
24. Tap 'Advanced'
25. Tap the ‘WAP’ option
26. In the 'Server’ field enter ‘193.113.200.195’
27. In the ‘Port’ field enter ‘9201’
28. Tap 'OK' four times to exit
###########################################
O2 XDA Exec MMS Pay Monthly Settings':
###########################################
1. Select 'Start'
2. Select 'Messaging'
3. Select 'Menu'
4. Select 'MMS Configuration'
5. Select 'Servers'
6. Select 'New'
7. Type in Server name or 'O2 MMS'
8. Select 'Gateway' and type in '193.113.200.195'
9. Select 'Port number' and type in '9201'
10. Select 'Server address' and enter 'http://mmsc.mms.o2.co.uk:8002'
11. Select 'Connect via' and select 'My Work Network''
12. Click 'OK'
13. Highlight 'O2 MMS' and click on 'Set As Default'
################################
O2 XDA Exec Mobile Web Settings
################################
1. Select 'Start'
2. Select 'Settings'
3. Select 'Connections'
4. Select 'Connections'
5. Select 'Manage existing connections', under 'My ISP'.
6. Select 'New'
7. Enter name for connection of 'o2 mobile web'
Select modem type, choose 'Cellular Line (GPRS)
8. Click on 'Next'
9. Enter Access Point Name of 'mobile.o2.co.uk'
10. Click on 'Next'
11. Type username of 'o2web'
12. Type password of 'password'
13. Select 'Advanced'
14. Select 'Servers'
15. Click on 'Use specific server address'
16. Click within the 'DNS' field, and enter '193.113.200.200'
17. Click within the 'Alt DNS' field, and enter '193.113.200.201'
18. Click 'OK'
19. Click 'Finish'
PAYG but i know what settingsto change thanks mate much apreciated
collins199820, any chance you can share those settings please?
I've had major hassles trying to get my mms settings sorted on my xda exec.

wm 6.1 and the uk

ive lost a weekend messing around with these different roms and although they look and run realy nice, untill one of you genius's make a rom for the tmobile mda mail im going to have to go back to my [email protected] tmobile 6.0 rom.
issues with email trying to use wifi, when these phones have no wifi!
issues with keypad mapping
and even after messing with settings and trying various cab files still no mms working.
there must be a uk guru out there??
Which ROMS have you tried?
I do not think I am understanding what you are saying. The T-mobile Dash/Excalibur has wifi, and wifi works in all of the ROMS i have tried including the stock t-mobile one.
You may have to configure some options in regard to internet/data and mms. Have you done any configuration under the Settings -> Connections -> GPRS menu? Each time you flash your phone, you have to reconfigure these settings.
Anyhow, I am not sure what you mean by the "tmobile mda mail." If this is a completely different device then the T-mobile Dash/Excalibur, then you have posted in the wrong forum; and I am surprised any of the ROMs on this forum even installed in the first place!
ive tried kavana 080307 and 080308.
tmobile mda mail has NO wifi! its like the dash in every way except this. tmobile uk must be tight wads.
subsequently email tries with gprs for a few seconds then goes to try wifi (get double arrow symbol in top right) then unsupprisingly no email.
i have configured gprs and internet explorer works (quite well infact).
http://www.manuals.t-mobile.co.uk/manual.asp?manualid=1866
That is bizzare. Is it possible to cook a ROM without wifi drivers? Sombody in the 6.1 thread said that they got their wing to work with it, perhaps they just dont use it for e-mail then. Do any of the other roms work with email? It would be a shame to have to downgrade to the stock tmobile ROM.
tell me about it, i can live without mms but not without email
In the meantime, you should try this:
http://forum.xda-developers.com/showthread.php?t=354126
If you need help installing, just give me a shout It can be a real pain for the first time without the nice wizard that comes with the new 6.1 ROMs.
NorseLaQuet said:
In the meantime, you should try this:
http://forum.xda-developers.com/showthread.php?t=354126
If you need help installing, just give me a shout It can be a real pain for the first time without the nice wizard that comes with the new 6.1 ROMs.
Click to expand...
Click to collapse
cheers mate your a star, quite a few pages reading there tough so here goes
along with this-----UK settings----
Setting up your connection
1. Select the Start menu
2. Scroll to and select More…
3. Scroll to and select Settings
4. Scroll to and More…
5. Scroll to and select Data Connections
6. Pushing the joystick left or right, scroll through the profiles listed under Internet connection
 If you see the profile T-Mobile Internet or T-Mobile GPRS (Web) listed, leave either one displayed in the
box then press Home to return to the main menu. You now need to skip the next steps and go to the
instructions Setting up your Picture Messaging profile below.
 If neither are listed, select Menu and follow the remaining instructions below to set up an internet
connection
7. Select Edit Connections
8. Scroll to and select GPRS Connections
9. Select Menu.
10. Scroll to and select Add
11. In the box Description enter T-Mobile Internet
12. Scroll to and select Connects to
13. Scroll to and select MMS Network
14. Scroll to Access point and enter general.t-mobile.uk
15. Scroll to User name and leave blank
16. Scroll to Password and leave blank
17. Select Done
18. Press the Home key
Setting up your Picture Messaging profile
1. Select the Start menu
2. Scroll and select More
3. Scroll to and select Configurations
4. Scroll to and select MMS Settings
5. Select Menu
6. Select MMSC Settings
7. Press Menu
8. Select New
9. In the Name field enter T-Mobile MMS
10. Scroll to MMSC URL and enter http://mmsc.t-mobile.co.uk:8002
11. Scroll to WAP Gateway and enter 149.254.201.135
12. Scroll to Port and enter 8080
13. Scroll to and select Connect via
14. Pushing the joystick left or right scroll to and select The Internet
15. Select Done
16. Scroll to T-Mobile MMS
17. Press Menu
18. Scroll to and select Set as Default
19. Press the Home key
Your phone is now ready to send picture messages.
I've tried the above settings for my Dash which I'm using in the UK and still no luck
i used these setting first, then modded them with the above
cheers burnsey but I get an error copying the file. Its connected via active sync and I'm using the most recent htc rom.
No idea why
EDIT - installed on reboot, GPRS & MMS seem to be working at last.

Optus settings/ROM for HTC Touch Diamond

Having problems getting on the internet. Does anyone have an Optus ROM or the settings required to get this phone working on the net....thanks Hugh
perthbar said:
Having problems getting on the internet. Does anyone have an Optus ROM or the settings required to get this phone working on the net....thanks Hugh
Click to expand...
Click to collapse
enable auto config... under settings connection / advanced network...
mine works without any extra settings...
but i'm sure gprs /3g settings are on optus' mobile homepage
Hi
I experienced a similar problem with my Diamond I purchased on the weekend. It was a Telstra NextG model that was supposedly unlocked and able to work on all networks.
It worked with my Optus SIM as a phone but I couldn't get any Internet connectivity.
I ended up flashing it to a cooked ROM which auto-detected the Optus SIM on first boot and configured itself automatically. Internet is now working without problem.
FYI I'm now using "Dia Druitt v05" ROM and am very happy with it. Original ROM version was 1.38.
Battery life is not great but I have just changed the radio from .06 to .bs14 and will see if that makes any difference.
Cheers
Loki
loki429 said:
Hi
I experienced a similar problem with my Diamond I purchased on the weekend. It was a Telstra NextG model that was supposedly unlocked and able to work on all networks.
It worked with my Optus SIM as a phone but I couldn't get any Internet connectivity.
I ended up flashing it to a cooked ROM which auto-detected the Optus SIM on first boot and configured itself automatically. Internet is now working without problem.
FYI I'm now using "Dia Druitt v05" ROM and am very happy with it. Original ROM version was 1.38.
Battery life is not great but I have just changed the radio from .06 to .bs14 and will see if that makes any difference.
Cheers
Loki
Click to expand...
Click to collapse
HI Loki
Can you explain how you did this by Dia Druitt v05 ROM...I have the same problem...I can call and SMS but now internet activity / MMS...dont know what to change on the phone...thanks for your help
You should be able to download the optus/vodafone rom from HTC using the Telstra Next G diamond serial without any issues.
Otherwise, here are the steps to manually input them:
For Internet:
1. Tap on the Start button.
2. Tap on Settings.
3. Tap on Connections.
4. Tap on the Connections Icon.
5. Tap on Add a new modem connection under My Work Network.
6. Enter Optus WEB in the Enter a name for the connection field.
7. Select Cellular Line (GPRS) in the drop down list of Select a modem.
8. Tap Next.
9. Enter internet in the Access point name field.
10. Tap Next.
11. Enter in the User name field or otherwise leave it blank.
12. Enter in the Password field or otherwise leave it blank.
13. Tap Advanced.
14. Select Use server-assigned IP address.
15. Tap OK.
16. Tap Finish.
for some pdas it is compulsary to set proxy for internet connetion if so in step 9 instead of "internet" put "wap.optus.net.au" and for proxy setting put "202.139.83.152" and port "8070".
For MMS:
1. Tap on the Start button.
2. Tap on Settings.
3. Tap on Connections.
4. Tap on the Connections icon.
5. Under My ISP, tap on Add a new modem connection.
6. Enter Optus MMS in the Enter a name for the connection field.
7. Select Cellular Line (GPRS, 3G) in the drop down list of Select a modem.
8. Tap on Next.
9. Enter mms in the Access point name field. Tap on Next.
10. Enter in the User name field.
11. Enter in the Password field.
12. Tap Advanced.
13. Select Use server-assigned IP address. Tap OK.
14. Tap Finish.
15. Tap OK.
16. Tap on Settings.
17. Tap on Messaging.
18. Tap on Menu which is located at the bottom right corner.
19. Tap on MMS Configuration.
20. Under Servers, tap on New.
21. Enter Optus MMS in the Server name field.
22. Enter 61.88.190.10 in the Gateway field.
23. Enter 9201 or Permanent, non-secure in the Port number field.
24. Enter http://mmsc.optus.com.au:8002 in the Server Address field.
25. Select My ISP in the Connect via drop down selection.
26. Select WAP 2.0 in the WAP Version drop down selection.
27. Tap on OK.
28. Tap on Set As Default.
29. Tap OK.
If setting above doesnt work change the port address on step 23 to "8070" then try again.
PS. I just did a search on google for "Optus MMS settings" and copied and paste those instructions.
Optus Rom Update
I've got the same problem. My Touch Diamond is from Telstra, but I'm with Optus. I can send/recieve sms, but not mms.
Can someone post up the latest rom for Optus users? I can'd download it from the HTC website as the serial number on the phone will only download the Telstra one.
Hey guys, I'm really sorry to bring this up again (after all this time) but I'm having issues getting the optus mms to work and I can't for the life of my work out why. I'd tried using all the suggested settings and it still refuses to work (the mobile internet is and has been working flawlessly for some time now).
I was just wondering if any of you guys actually managed to get the mms working or if you all just ended up flashing with a cooked rom.

[Q] MMS tmobile uk

MMS not working - ive followed settings from tmbile site below (obviously they are for froyo/gingerbread and im on ICS, but menus are similar)
All settings are per the description but on recieving MMS i just get a text telling me to visit the website with password etc.
I have 2 APNs there (this is how things were after ROM install) I have ensured the one called "picture messaging" has the settings below. The top APN has a dot on the rhs of it if that matters?
TIA
How to configure picture messaging settings on your HTC Desire.
Press the Menu key
Tap on Settings
Tap on Wireless & Networks to select.
Scroll down and tap on Mobile networks
Tap on Access Point Names to select.
Press the Menu key
Tap on New APN
Tap Name then enter T-Mobile MMS select OK
Tap APN then enter general.t-mobile.uk select OK
Tap Username then enter t-mobile select OK
Tap Password then enter tm select OK
Tap MMSC then enter http://mmsc.t-mobile.co.uk:8002 select OK
Tap MMS proxy then enter 149.254.201.135 select OK
Tap MMS port then enter 8080 select OK
Tap APN type then enter mms select OK
Press the Menu key
Tap Save
Press the Home key
Your phone is now ready for use
Bump Anyone?
have you tried sending a MMS? sometimes the settings get automatically configured, when you send a MMS first.
what ROM do you use? maybe MMS is not working yet.

Categories

Resources