Related
May I know will VOIP worked with Hermes LVSW Edition (2007-03-26)?
I installed the VOIP.cab, and check with windows folder, there is No such files.
ipdialplan.xml
dnsapi.dll
voipphonecanvas.dll
rtcdll.dll
May I know How to make it work?
I'm not using LVSW edition but VOIP is working with my WM6. Try download this,
ftp://xda:[email protected]/Hermes/WMXL_Support_Files/WM6VoIP.CAB
May I know which version of WM6.0 you used?
Slightly modified Black v1.2.
I already make a few call just now. Works but there is echo.
May I know do u have these files?
ipdialplan.xml
dnsapi.dll
voipphonecanvas.dll
rtcdll.dll
Initially do not have. But after installing tha CAB I show you earlier, the files now in the windows directory.
Working VOIP on LVSW
I work with the LVSW 25-3-2007. VOIP works fine, but besides the VOIPWM6.cab, you also need to generate a voip.cab with your settings, like username and password.
Search the thread where everything has been bescribed. Follow the instructions and VOIP works... for me without echo (voipbuster).
I have create the VoIP.Cab and installed it, but the Internet Call alway available or no service, but I can't use it!
You have to tap the today item for internet call. until it become selected.
What provider that you use? I use voipstunt & voipbuster.
I using HKBN and I have tap the Internet Call, but there is No response!
In internet calling tab, what do you select? For me I select Use internet calling "whenever available"
Yes, I have select the Whenever available.
I 've a similar problem too.
I've installed the LVSW Edition, + the voip Cab.
I've configured a .cab to enter my ISP configuration.
When I launch Wifi, in 10-15 sec, I have : Internet Calling Available on the today screen.
BUT !
When I click on the internet tab on the today screen, I just see the configuration never, whenever available, only if cellular is not available.
And that's all !
How can I phone ?
When I use the green button of the hermes, I have "no sim card".
( I've removed it)
And I don't see how to pass a call.
Help is welcome.
Thanks to all !
Why you not try voipbuster or voipstunt.
How can I make the internet call from available to selected?
I have check the phone , which contain Prov0SIPSettings under the directory \Windows\System\VoIP
You may need some registry editing,
HKLM\System\VoIP\SIP\EnablePort5060
change to value from 0 to 1
If you connect to internet using 3G then
HKLM\Comm\RTC\AdapterTypes
delete value for both 1 & 2.
After that softreset your Hermes.
When internet call become selected, all your call will be using VoIP.
I did the registry changes, but, no way !
It always tell me that I can't launch the call !
Don't understand...
If someone could help !
I change these registry and reset, it still show available.
Does your configuration in voip is correct? ie username, password, server, port, etc..
If you are using voipstunt, I can show you my configuration.
The configuation may be correct,but some setting I need to confirm, Anyone know the sip.registrar.com of the HKBN 2b service? or the configuration of HKBN?
Hi all,
I purchase the HTC Vox as Orange e650.
I'll to know if there is a way to store the wlan config (precisely for hidden network).
The fact is that when I configured the Wlan connection and switch off/on the phone, I have to reconfigure before use it.
Thanks in advance for your help
Mods Please Close This Thread
This forum is for Hermes. Post elsewhere, like "General"
CrazyBaby said:
Hi all,
I purchase the HTC Vox as Orange e650.
I'll to know if there is a way to store the wlan config (precisely for hidden network).
The fact is that when I configured the Wlan connection and switch off/on the phone, I have to reconfigure before use it.
Thanks in advance for your help
Click to expand...
Click to collapse
You can create a CAB with your WIFI settings by following this post:
http://forum.xda-developers.com/showthread.php?p=1227587
It's for the HTC Hermes (you posted to a Hermes thread even though you have a Vox) but it should work on any WM device, including yours.
Regarding why your WIFI settings vanish after you turn your device off, sorry but I can't help you there.
THIS IS THE SOLUTION FOR ME WITH YOUR ANSWERS
1) Create any VoIP Account with a provider (for example I use VoIPStunt)
2) Configure the wm6 voip with your settings account:
http://forum.xda-developers.com/showthread.php?t=299950
or more easy,
http://forum.xda-developers.com/showthread.php?t=303493
3) Talk using VoIP:
http://forum.xda-developers.com/showpost.php?p=1233797&postcount=14
4) Call to SIP address:
http://forum.xda-developers.com/showpost.php?p=1235084&postcount=21
and
http://forum.xda-developers.com/showpost.php?p=1234112&postcount=19
Thanks a lot for your help.
Toni
Hi all,
sorry if this post is OFFTopic for this forum, but I search and read other post and I not find the solution.
I want use the WM6 VoIP (with lVSW ROM). I install the voip cab and the settings for my provider.
The question is: how can I receive calls? how can I make calls? I not find any dialpad or similar to make it.
Thanks a lot and sorry for the offtopic.
Toni
Click to expand...
Click to collapse
I have been reading a little about this but have not done anything about it because been to busy flashing...lol...but anyhow if you already did everything i think i read that in order for it to work you need to be connected to WIFI, not your isp...if im wrong please correct me someone!! and if anyone got it to work with AT&T please post carrier settings please!
ToniSC said:
Hi all,
sorry if this post is OFFTopic for this forum, but I search and read other post and I not find the solution.
I want use the WM6 VoIP (with lVSW ROM). I install the voip cab and the settings for my provider.
The question is: how can I receive calls? how can I make calls? I not find any dialpad or similar to make it.
Thanks a lot and sorry for the offtopic.
Toni
Click to expand...
Click to collapse
If you searched in the forum you would have found this thread
http://forum.xda-developers.com/showthread.php?t=299950
Hi Shaun33
I found this post and I read all the commants. I make all steps that post indicated, but my problem is that I doesn't know how to use the wm6 voip.
In the same port, anybody has the same problem, but there hasn't answer.
Thanks.
Toni
if you can't see an answer in the thread (http://forum.xda-developers.com/showthread.php?t=299950) then there probably isn't an answer!
ToniSC said:
Hi Shaun33
I found this post and I read all the commants. I make all steps that post indicated, but my problem is that I doesn't know how to use the wm6 voip.
In the same port, anybody has the same problem, but there hasn't answer.
Thanks.
Toni
Click to expand...
Click to collapse
Why not you post what you have done & we identify what is the problem & give the solution.
i think he just wants to know how to actually use it
I am wondering, if he buy the VOIP service or not....
I wanna ask, will other VOIP service provider work on WM6?
like SunRocket or ViaTalk, etc.
TIA
ToniSC said:
Hi all,
sorry if this post is OFFTopic for this forum, but I search and read other post and I not find the solution.
I want use the WM6 VoIP (with lVSW ROM). I install the voip cab and the settings for my provider.
The question is: how can I receive calls? how can I make calls? I not find any dialpad or similar to make it.
Thanks a lot and sorry for the offtopic.
Toni
Click to expand...
Click to collapse
If I understand you correctly, you want to know how to make a call after getting your VOIP settings. Actually, there is no separate dial-pad for a VOIP call - you have to use the existing dial-pad which you would normally use when making a cellular call.
If you have set up your VOIP settings correctly, your plug in on your Today screen should say "your VOIP service:Available or Searching" instead of Internet Calling : Available/Not Available.
In my case, I use Gizmo, so it says Gizmo:Available (when it's not connected) and Gizmo:Searching (when connected via wifi).
When it says Searching, you click on the plug-in, then go to your normal dialing pad where it should also say "Gizmo" on the top right hand corner to indicate that WM6 is using VOIP instead of GSM to make the call.
Hope this helps.
As I am a noobie, I would appreciate it if the senior members could either confirm the above or correct anything which is wrong above.
arul said:
If I understand you correctly, you want to know how to make a call after getting your VOIP settings. Actually, there is not ..........
Click to expand...
Click to collapse
This is the correct "Usage Instructions" for voip.
This is also how I experienced it. Voip only connects through WIFI, although I have made the registry changes as mentioned in another thread. It will be nice if you can select which service to use eg. VOIP or GSM
what if i want not use voIP but my gsm network to call. there is isnt any option to do that once you setup voip. you can disable it but thats not the point. nokia's give you option. am i wrong?
nolovelust said:
what if i want not use voIP but my gsm network to call. there is isnt any option to do that once you setup voip. you can disable it but thats not the point. nokia's give you option. am i wrong?
Click to expand...
Click to collapse
Just tap the today screen item for it toggles between VoIP and GSM
ok... lots of speculation here. Let me tell you what I know:
VoIP, when properly installed, works in the following manner. (If you can't obtain these results then your ROM needs upgrading or your provisioning is incorrect).
Initially, the Internet Calling today screen plugin will show "off" when VoIP is set to "Never" in the Internet tab of phone settings.
When connected to WiFi, you can change this setting to "whenever available". At this point, a properly provisioned VoIP installation will show your VoIP provider from the provisioning XML and "Searching". Shortly after, "Searching" will change to "Selected". At this point all outbound calls placed from your phone will be through your VoIP provider. In fact, the phone skin will show this name too.
However, your phone will ring for incoming calls made to your GSM phone number as well as your VoIP phone number
Now, tapping "Selected" on the Today screen VoIP plugin will change this status to "Available".
At this point, outbound calls get placed through your GSM provider again and the phone skin will show your GSM provider name.
However, inbound calls to both your GSM and VoIP numbers will still ring on your phone.
Turn off VoIP again by going to phone settings and changing the calling network to Never.
Additional notes:
The "Searching" forever behavior previously described is a Bug in some WM6 releases. lvsw 4/23 doesn't have this issue.
You can also set VoIP to work over 3G as well as WiFi by removing the values "1" and "2" in HKLM\Comm\RTC\AdapterTypes. However, there are issues with this that haven't been fully resolved yet. Incoming calls work fine but the called party can't hear you when you place an outgoing VoIP call over 3G.
so there is no way to do this
dial a number select or even press voip button and you dial via voip.
i hate symbian but i might just have to carry to phones because voip enabled nokias can do it.
hmmm maybe you didn't understand. Sorry about that. Short answer is No, there is a way to do this. You can dial any way you want with VoIP active. Just toggle the today setting between "Selected" or "Active" to choose which to use.
Computer to computer calls
I was wondering if there could also be made computer-to-computer-calls. Is there a way to enter 'voip-names' instead of phone-numbers?
at&t CallVantage
How about those of us on Cingular or "The New at&t" is it possible to subscribe to the at&t VoIP service called CallVantage and then get it working on the Hermes?
@tembares:
You *could* try calling directly to the other phone's IP address. the default dialplan supports this. use the following syntax (example assumes you're calling a phone whose address is 192.168.0.1):
192*168*0*1
@brandyholt:
If the AT&T Callvantage service supports a SIP based softphone then the answer is yes.
Thanks a lot Sleuth255 and all people answer to me.
Finally I have been able to make work it!!!!!
@Sleuth255
One question please, if 192.168.0.1 is 192*168*0*1, how I dial for call to an SIP address, for example my gizmo address [email protected]
Toni
Sleuth255 said:
@tembares:
You *could* try calling directly to the other phone's IP address. the default dialplan supports this. use the following syntax (example assumes you're calling a phone whose address is 192.168.0.1):
192*168*0*1
@brandyholt:
If the AT&T Callvantage service supports a SIP based softphone then the answer is yes.
Click to expand...
Click to collapse
Hello,
I’ve read tons of tread in the forum regarding VoIP but I still can’t get my thick heard round it. I’m massively confused I definitely need help.
I’m wondering if there is any simplify tutorial in the forum of how to install VoIP, Sip, pleasessssssssssss?
I’m currently running Black 2.5 – Radio Version 1.41.00.10-Rom Version 3.29.707.4
Do you have a SIP based softphone account with a VoIP provider yet? Alternately, have you installed asterisk or 3CX server?
Also, VoIP isn't fully sorted on black 2.5 yet to my knowledge.
VoIP & Radio help.
Currently I do not have VoIP account with any providers, do I need one to get the settings to the phone, if yes which provider would you recommend pls?
Secondly I haven’t installed any of the software mentioned in your reply yet, I thought I’ll bump into step by step guide in the forum do that.
I think the last paragraph of your reply answers my frustration really,Its a matter of wait till VoIP settle on Black 2.5. keep me Fingers cross.
Hey! Least I forgot, how do I stream radio on my Hermes? I have no problem connecting to T-mobile GPRS, as well as my USB wifi router. But for some reason it will just not connect to no online radio station. Do I need to install something??? Leave it to the expects to help. Thx
SIP Config
New SIP Config 2.0 by shaun33
http://forum.xda-developers.com/showthread.php?t=303493
http://forum.xda-developers.com/show...9950:rolleyes:
Input your VOIP provider info
Any patches for 2.5 Black yet?
It searches, tries to connect, but I get the following SIP response (after using Sip Config 2.0.0)
Got SIP response 481 "Call Leg/Transaction Does Not Exist" back from 192.xxx.xxx.xxx
Hi all,
I bought this smartphone and want to use VOiP with sip server in WiFi. I installed the cab WM6VOIP and after reboot today screen shows me Internet call: blocked service.
So, I think my mobile operator made some kind of block. What you guys recommend to use it for unblock this ?
Thanks very much,
Mauricio
just post in Kaiser FOrum... there you'll get help!
Actually you probably won't. I must have posted 5-10 questions since registering and not one has been responded to.
Good luck though!
i had a tytn in the past...
i can remeber that there are some sip settings to set befor it works...
the voip cab is only to enable the features...
just search for voip in tytn forum.. maybe you find there something!!