Hi, I have not been able to get Mapking R10, R12 or 2007 to work on WM6. I have tested it with LSVW, Black 2.x, 3.x and also WMXL.
I read a post here that the person got it working with 1.38 radio but I have tried all 4 variants of 1.38 radio and it does not seem to start.
I get the splash screen then it goes back to my wallpaper.
hope someone might be able to help. thanks
Hi Joej,
Mapking 2007 working on my WM6 since LSVW was launched in the forum (this is the first i flashed to my rom) till now with other like ELF 2.0, DYMOND etc. I think you might have problem with storage card. It happened once on my HP RW6828. I did hard reset and cleaned MAPKING folder on the storage card then it works!
__________________________
DOPOD 838 PRO
CUSTEL 2.5
Radio v1.40.00.30
SuperCID
Mapking Thailand runs on Black 3.0 and 3.5 overhere...
Related
Hi!
I really feel like a newbie when i read all the posts about all the different rom versions, so can someone give me some advice which rom i should use to upgrade to?
I have a dutch TMobile MDA pro, which is still at the default rom:
ROM: 1.12.42 WWE (8/23/05)
Radio: 1.00.02
extRom: 1.12.125 WWE
I am experiencing problems with spontaneous hangs (which might have to do with 3rd party software, but the device itself isnt exactly stable)
but also the radio often just loses signal, which i can only fix by rebooting...
I want to upgrade, but i don't want to spend toooo much time on it. Is there a rom that offers better stability which is easy to install and configure?
Regards,
Casper
Try updating to the latest I-Mate Jasjar ROM. Very stable and fast. I too use a lot of 3rd party applications and games. This is my 3rd day of not experiencing any problem without doing a soft reset in the morning.
I prefer Orange ROM... both imate and orange are the same version though... only that Orange's ROM is released while Imate is still not released
ady said:
I prefer Orange ROM... both imate and orange are the same version though... only that Orange's ROM is released while Imate is still not released
Click to expand...
Click to collapse
ady, what made you say the I-Mate ROM has not been released yet? It is true there is a test version which came 2 weeks earlier than the one I am using now which is NOT the test version. Just curious.
Another question please about the NEW Orange ROM. Is it true that the vibrate is always ON and you can't turn it OFF?
I did it!
last week i gathered my courage, downloaded the JasJar rom, found the MaUpgradeUt_noID.exe tool, pressed install, drank a cup of coffee, and was finished!
It went flawlessly! And my T-Mobile MDA Pro has never run smoother!
I couldnt (and wouldnt) have done it without this forum, so thanks guys!
Now its just waiting until there is a new stable rom with A2DP on it, and then i'll upgrade again!
koesper said:
I did it!
last week i gathered my courage, downloaded the JasJar rom, found the MaUpgradeUt_noID.exe tool, pressed install, drank a cup of coffee, and was finished!
It went flawlessly! And my T-Mobile MDA Pro has never run smoother!
I couldnt (and wouldnt) have done it without this forum, so thanks guys!
Now its just waiting until there is a new stable rom with A2DP on it, and then i'll upgrade again!
Click to expand...
Click to collapse
I upgraded my mda pro to the latest t-mobile UK ROM straight out of the box. But even then I have the same problems with spontaneous hangs. And reading your success story I gathered all the files JASJAR_WWE_13076_164_10900_wwe_ship.exe and MaUpgradeUt_noID.exe to upgrade to the JasJar rom myself. But as complete newbie who is affraid to mess things up, did you do anything else except unzipping the ROM update and copying the MaUpgradeUt_noID.exe to that folder ? The reason why I am asking I read somewhere that you have to add [CHECKCEID_TYPE]=1 to the RUU.conf file.
Thanks in advance.
JASJAR rom works fine
My T-mobile mda pro NL arrived today and i almost immediately flashed it to Imate JASJAR firmware on the xda-developer ftp. I used the Universal_Upgrade_v1.30.68_radio_1.09.0.zip file which contains:
Rom 1.30.68 WWE
Radio 1.09.00
ExtROM 1.30.153
Protocol 42.42P8
and is dated at 08 february 2006.
This works fine and removes the ugly pink theme and adds some nice apps like skype after customizing. It also has an alternative contacts menu, which has skype integration. Pocket MSN (a not so nice app imho) is also included, although i use the new agile messenger beta.
The bootscreen mentions 'for testing only, not for sale' which might indicate that it is not a final (not sure though).
Thanks it works like a charm.
ROM 1.30.76 WWE
ROM date 20 february 2006
Radio 1.09.00
Protocol 42.42.P8
ExtROM 1.30.164 WWE
I'm using T-mobile UK version with 1.09 radio rom. This version INCLUDES the a2dp profiles, but no pushmail. You can use the blackberry connect software from german t-mobile site on the Universal. so you will have AND pushmail and A2DP.
http://www.pocketinfo.nl/artikel/5561
I think Imate rom is also a nice ROM.
Reading this topic en reading the instructions about bootloader, I have another question. In the instruction ist says to make a factory reset after loading the new ROM. Does this mean that all information in your MDA is wiped out and must be reloaded?
yes the machine is a complete naked beauty afterwards
Hey all,
I've read on a few WM6 posts that Pocket Informant 2007 works on the WM6 roms, yet when I try it I'm getting an error that claims that it isn't intended to be installed on this version of OS.
How have you found a way around this?
Dan
Well I have a legal key and it works on WM6 on my Wizard, and Universal.
You can change the cab file`s maximum OS version to 6.0 with WinCE CAB Manager.
Would P3600 owners who have upgraded to the D810 WM6 upgrade please post their experiences here.
ie:
Did you run into problems doing the upgrade?
Did everything work properly after the upgrade?
Was it worth it or did you (or want to) go back to WM5?
Thanks
hi,
i have try to update my HTC P3600 with the oficial D810 WM6 rom!!!
result: i brick my phone!!! the rom update has stopped on 35%, and the PDA stop responding.
just recover it and go back to old ROM!
i will do it!!!
No problems to up and down
Hi, I upgrade to official ROM and any problems occurs, but I prefer PDAVIET Rom, then I downgrade the ROM and upgrade Radio to 1.46.30.11 and have all so far so good!
I hated everything about this ROM including the constant freezing of my Trinity. After 2 days I went back to AXEL's ROM and haven't looked back.
Updated yesterday morning with Dopod WM6 ANZ Rom and radio 1.46.30.11, and for me, it's paradize now...
Thanks for the replies! Anyone else with a positive experience?
I had problems with data connection with the ANZ Rom and Radio 1.46.30.11. Keeps disconnecting from the network Edge/HSDPA--could not use PIE or download email. However, with the SEA Rom and Radio 1.46.00.11 I had no problem. I think it's a Radio issue, at least for me on the USA Cingular/ATT network.
thomastran said:
. . . with the SEA Rom and Radio 1.46.00.11 I had no problem. I think it's a Radio issue, at least for me on the USA Cingular/ATT network.
Click to expand...
Click to collapse
That brings up a good point. Has anyone tried this ROM on T-Mobile USA?
Fast and stable
I have the new aussie rom and the new radio rom 1.46.30.11 and it works perfect really fast and stable everything works...i am happy with it...
For those who successfully upgraded their P3600 to WM6, what technique did you use?
I tried doing a straight flash with ANZ ROM and was not successful. During the upgrade, the process stopped at 28%--similar to what some people have encounted. I got a screen with the new Bootloader 3.03.0000. In order for me to get out of that, I reflashed with a previous cooked ROM. It didn't flash through, but it did reset my Trinity.
While my Trinity is not BRANDED, I found that using the "HTC Trinity SIM CID Unlock" allowed me to successfully flash to the new ROM. I entered the device into the previous bootloader version 1.07.0000 prior to flashing.
As I've mentioned before, I had trouble with the radio version 1.46.30.11 with USA Cingular/ATT. I ended up using the SEA ROM with radio version 1.46.00.11 to flash the second time around.
PGMMA said:
Would P3600 owners who have upgraded to the D810 WM6 upgrade please post their experiences here.
ie:
Did you run into problems doing the upgrade?
Did everything work properly after the upgrade?
Was it worth it or did you (or want to) go back to WM5?
Thanks
Click to expand...
Click to collapse
Last night (14/7), I have upgrade my D810. No problem. According to the Guide, don't forget to take out MiniSD, battery is charged at least 50%, etc. In general the softwares for WM5 (Microsoft reader, Pocket e-Sword, Kevtris, etc) are compatible with WM6. Bass sound is good. I like WM6.
Thanks Thomas,
That's great information!
generally worked fine for me. I think mUns TE was more stable, but the battery discharging was annoying.
However a few issues:
1) Password for the web connection (GPRS) has vanished once or twice
2) Seems to lose GPRS data conenction once in a while
3) Biggest issue- the DEVICE ID has changed. This has messed up my TomTom Traffic subscription and TomTom support want a letter to prove this happened. ffs.
4) I think the main memory leaks away....
I finally decided to give WM6 a try on my P3600 but installed AX3L's all-in-one v2.0.8.1 ROM. It works well on T-Mobile's USA's network and is easy to install.
if the original rom gets stuck, what i did was flash to the original WM5 then reflash to the WM6 version.
I upgrade my D810 to WM6 and it cannot receive phone call using China mobile SIM card, used to work for the previous ROM update.
Hi.
My TyTN is running Schaps 4.01 and is experiencing some troubles running Skype as well as having a hard time launching Contacts - which is a memory leak problem due to RandomAccess .
Anyways, A freind's TyTN which runs Schaps 3.54 ROM, does not experience those problems, and so, I would like to downgrade my TyTN from 4.01 to 3.54
Is that possible?
Are there any special actions need to be taken prior flashing the ROM?
Amit.
As far as I kown, there is nothing to do. Just flash your TyTN to Schap's 3.54.
Can someone confirm just to be sure ?
thats right...
you can flash any rom...
which wm6.1 rom upgrade mod is the most stable for dopod d810? I tried the following rom but after a few hours where d810 device poweroff, couldnt return back to screen, did a soft reset and screen hang prior to showing windows mobile 6.1 screen. Had to do power+camera+reset to boot loader mode and install rom again! Any help is appreciated
[ROM][WWE][25.07.2008]Trinity WM 6.1 (CE OS 5.2.19965 ULTIMATE Edition by Akeo)
[ROM][WWE,CHS,CHT,JP,KR,TH]Trinity WM6.1_5.2.20755(TouchFLO 2D) Full Ver 3.17.YK
biggercrap said:
[ROM][WWE][25.07.2008]Trinity WM 6.1 (CE OS 5.2.19965 ULTIMATE Edition by Akeo)
Click to expand...
Click to collapse
this should've worked fine as I've used this before. if you are experiencing problems with both roms then I would guess its your phone.
any rom found here besides ones labeled P3600i is fine for your phone.
do I have to take out the SD memory card before installing the rom?
it would probably be safest to do so. but I've always forgotten to remove my sd card and never had a problem so far.
nerd1 said:
this should've worked fine as I've used this before. if you are experiencing problems with both roms then I would guess its your phone.
any rom found here besides ones labeled P3600i is fine for your phone.
Click to expand...
Click to collapse
The PDAViet works on my phone Dopod D810