[email protected]
i've done the update today after unlocking my device with imei-check.
First i tried the WWE Rom... During the update Progress it stuck and didnt boot anymore....
I then got to the Bootloader and installed the Official O2 Germany update with their installer. Now EVERYTHING works fine.... bluetooth... gps with tomtom... GPRS connection (after manual configuration) ..... I think anyone who wants a german WM6 should go this way....
i thought i should share my experience with you.
Question.... do you think it is possible to use the O2 installer to install any rom by replacing the original one?
Related
anyone has an english rom for dopod 900?
what can be the problems if i change the language rom, chinese to english? software incompatibility?
Hi,
I bought a Dopod 900 with a chinese ROM and flashed it with the JasJar ROM available on this site.
I did not experience any problems. The dopod bluetooth headset that came w ith my Dopod works fine and I also manage to use the voice commander through the headset to do voice dialing.
Actually the voice works with anything. I made a command for "calculator" to start up the calculator.
I've downloaded the game "Bejeweled 2" and it works fine.
I've experimented with the VGA hack, that works, but I get eye strain.
I've been talking to Dopod Singapore (www.dopodasia.com) about getting an english Dopod ROM from them but am still waiting for a response.
While the JasJar ROM works fine, I want to see what the other ROMs can do.
I havent tried the O2 Exec rom because I do not know how to use the NoID installer with the O2 installer.
With the JasJar ROM, the files were seperate from the executable, if anyone can point me to the O2 Exec ROM files which ARE usable with the NoID installer, please paste the URL here and I'll try that.
Regards
Michael
thanks m8. i am eagerly waiting for my dopod.
but i am still contemplating which might be a better rom
JJ or O2...expert opinion will be appreciated!!
i ve been hesitant to buy the dopod coz all the dealers here in taiwan says there will be some software compatibilty and that they wont be giving me any warranty for the same.
but after coming to this forum, i see thr r ppl like u who have succefully flashed the rom!
but i am a lilttle sckeptical of changing the rom myself. as i am scared something might go wrong(as it is not a cheap toy). i am a total newbie and i dont read chinese at all.
so i will be very grateful if you or anyone can give me a step by step procedure of flashing the rom
thanks in advance
ı bought a dopot which in chinese and than upgrade it to english but ı used meupgrade no id.. but its work greatknow and no proplem.
Hi!
I want to install on my MDA compact III the O2 Orbit Windows Mobile 6 Update. First I have to CID unlock, then I can Install the update. That shouldn't be the problem (in theory). My question is: Does this update run properly on my MDAcIII? Because it doesn't have the WIFI-Chip the Orbit has.
And I have another Question: How can I save my Original ROM before I update? Is that possible? OR: where can I download the original German T-Mobile MDAcIII ROM?
sincerely yours
KobiP (the noob )
First of all, i do not know where to get the original T-Mobile ROM, but after some time i did not care anymore and updated. The Update Process works perfectly and is done in about 5 Minutes. The ROM runs without any problems or errors, WiFi appears nowhere, so the System managed to recognize the missing hardware.
I have CID unlocked german MDA Compat 3.. Good Luck and Enjoy WM6
@Samson711
Thank you for your Help! I've tried it and it runs perfect! WM6 on my MDAcIII :-D
Hi Guys,
I am trying to get BlackBerry working on my XDA Orbit.
I upgraded via the SPL Method and then installed the Version 2 of the Black&Blue.
I then upgraded to the latest GSM Rom 02.93.90
As I could not get BB working I wanted to now install the German o2 Rom as Users reported they got BB working with this.
I again did the SPL Method but now always at 3% the German O2 Rom stops and gives me the Fehler / Error 244
Any hints ?
Pt-1
Sory to bring this back up but I am still stuck...
Anyone ?
Sorry to here your problems PT-1......but is there on a offical german o2 rom for you orbit.
Sure it came out while ago.
Just a quick question to.....are you the same Pt-1 from unlockers cos if you are thanks for all the help with my dbox in the past.
The Heed
There is only one PT-1 ;-)
Yeah , O2 Germany has officially released wm6 BUT NOT uk O2.
Now I would like to install the German on on my UK Orbit.
THX
PT-1
Hey
Iv got an o2 UK XDA Orbit, works fine with the B&B V2 and V3 rom. Also installed it on my uncles orbit last night, his works fine too.
What problems did you have with the rom? Maybe i can help?
pt-1 said:
Hi Guys,
I am trying to get BlackBerry working on my XDA Orbit.
I upgraded via the SPL Method and then installed the Version 2 of the Black&Blue.
I then upgraded to the latest GSM Rom 02.93.90
As I could not get BB working I wanted to now install the German o2 Rom as Users reported they got BB working with this.
I again did the SPL Method but now always at 3% the German O2 Rom stops and gives me the Fehler / Error 244
Any hints ?
Pt-1
Click to expand...
Click to collapse
1) IF you have key unlock CID. Sync PPC to PC and Run key Unlock CID.And Update German 02 Rom.
2) Run USPL v0.1 by Pof and Update Again German Rom.
Cheers..!
dzign-it said:
Hey
Iv got an o2 UK XDA Orbit, works fine with the B&B V2 and V3 rom. Also installed it on my uncles orbit last night, his works fine too.
What problems did you have with the rom? Maybe i can help?
Click to expand...
Click to collapse
I wanna try the German o2 rom to get my Blackberry client working
tom_codon said:
1) IF you have key unlock CID. Sync PPC to PC and Run key Unlock CID.And Update German 02 Rom.
2) Run USPL v0.1 by Pof and Update Again German Rom.
Cheers..!
Click to expand...
Click to collapse
Were do I find key Unlock CID ?
****ed up my artemis rom by upgrading stucks in loading mode WM6 screen. Can access bootloader but it always tell me upgrading again that i have the wrong rru....
CAN ANYBODY PLEASE UPLODE THE ORIGINAL WM5 ROM in GERMAN by htc for Artemis (NOT Orbit oder MDA)
OR where can i get the original rom to downgrade????
Please help
thanks
Look here, here or here or here
schould be the P3300_softwareupdate_GER.zip-File!
Tell me if it was the one you're looking for, so I have also the security of getting the original back if I screw it up.
Thanks so much! You are the hero bro. I nearly died....
It workes fine if you have the proper rom!!! The one for my german p3300 cid unlocked is this one:
http://download.sunrise.ch/downloads/manuals/qtek-windows/P3300_softwareupdate_GER.zip
What I have done:
1. Enter Bootloader (Voice Button + Softreset)
2. play in the Rom
3. got a artemis like it arrived from the shop
brilliant
My Orange SPV 3100 was locked on orange and I SIM unlocked only with the help of HTC_Hermes_SIM_CID_Unlock_v3a it worked fine and I now I am using O2 on it
However, now I wish to upgrade it to official wm6 from Orange or HTC it does not work it say USB not connected...and gets stuck on 4 colour boot screen.
Please any suggestion. HELP!
Official WM6 from Orange? Eh? Where is this?
Original WM6 upgrade from orange is here....
http://www.business.orange.co.uk/servlet/Satellite?pagename=Business&c=OUKPage&cid=1044134915191
naru6705 said:
http://www.business.orange.co.uk/servlet/Satellite?pagename=Business&c=OUKPage&cid=1044134915191
Click to expand...
Click to collapse
That is WM5 AKU3 release from April 2007 I think you'll find
My Orange SPV 3100 was locked on orange and I SIM unlocked only with the help of HTC_Hermes_SIM_CID_Unlock_v3a it worked fine and I now I am using O2 on it
However, now I wish to upgrade it to official wm6 from Orange or HTC it does not work it say USB not connected...and gets stuck on 4 colour boot screen.
Please any suggestion. HELP!
I forgot to mention I am on WINDOWS VISTA
Vista *could* be a problem.
On the O2 web site there is an official download of WM6 for the Trion. Maybe you should try to get hold of that since you are on O2.
i have also orange spv m3100
few days ago orange here (slovakia) announced there will be NO official orange WM6 update for this pda, so i decided and flashed it with tnt2 wm6 rom
my orange was never flashed before, so i did it in 3 steps, which i suppose you need to do too
1. install bootloader Hard-SPL-V7 (alias olipro 2.10)
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=30&Itemid=27
(you have there also link what to do first when you use vista)
2. install radio (gsm part) - i used latest v1.51 - find the download link on this page somewhere (hermes wiki)
3. install choosed rom - i used TNT2 professional pp4 with htc home
in fact i did it for the first time and had no major problem (only in step 3 the autodetection of bootloader failed and there was no option for v2.10 so i choosed "newer" or so) and after third restart the WM6 booted up ...
Hi there,
I too have an Orange SPV 3100, using it on O2.
I would prefer the O2 XDa Trion Rom but can't access it cos it is not an O2 serial number - (anyone who has the O2 XDA Trion WM6 ROM, please get in touch!)
Anyway, back on topic. Today, I upgraded my MPV3100 from WM5 to WM6 using the HTC ROM available via this site:
http://forum.xda-developers.com/showthread.php?t=298520
From this page I selected the following link which is a file share site, I selected the free download option and was downloaded in a minute:
http://rapidshare.com/files/2179382...1.255.1_102_6275_1.38.00.10_108_Ship.exe.html
This upgrades to the WM6 ROM and gets rid of all the Orange stuff and all their annoying branding, it just leaves it with the HTC logo's when reseting, no more Orange stuff in site!!
I suggest you use this unless you can access the XDA trion ROM.
I had absolutely no problems with the HTC ROM when installing it. Unit is running well, however, I have noticed I cannot access the front camera like others on this site have mentioned after upgrading to WM6 - a small price to pay as I never use it.
naru6705 said:
http://www.business.orange.co.uk/servlet/Satellite?pagename=Business&c=OUKPage&cid=1044134915191
Click to expand...
Click to collapse
yes this is only latest orange update for mn5 not wm6
if you have unlocked previously then i advise you run oli 2.10, ithink thats what its called basicly hard spl
this will let you instal the manufacturers rom
but why on earth would you do that
i suggest you install shamanix grass, based on schaps roms
its super fast and very stable