Related
Hi all,
Plz bear with my ignorance when it comes to upgrading ROMS etc.
Basically yesterday I upgraded to O2's official WM6 ROM .... and find it "not so good". It is slow to respond etc( i found it slower than my WM5 )
So now I wanna move to BB4, question is how do i do it??
I have downloaded an Artemis_USPL from Prof. So what are the steps I need to do??
Is it ...
1) Run start_uspl.exe from the zip file and let it complete.
2) Run( double click ) the img-46785-Tom_B_B_v4_0_TouchFlo_Professional.exe
Is that all I need to do?
Also, if I brick it .... what do i need to do to revert to an original ( say o2 WM6 ROM) ... is it USPL it again then run the O2 rom??
Many thanks
Fahd
yep, thats what you need to do. both 1) and 2) will need some user input and after it's done the device resets itself. so after 1) wait until restart is complete, then do 2).
for your original roms you dont need uspl. but if you are not completely sure, run it anyway.
Thanks for that. Time to give it a whirl! Wish me luck!!
Hmmm doesnt wanna play ball.
Did the above and ran uspl .... got stuck on a white screen. So I rebooted the Orbit and tried running the BB4 .exe ... got to 3 % and told to that .......
Error 270: Update Error. The image file is corrupted. Please check your update ultilty.
Can anyone help?? It will not upgrade ROM.
I keep getting the white screen and it cant run ROM utility(Error 224: Device not responding ).
I then reset the device and run BB4 ... I get to 3% and then I get error:270 ( image file is corrupt ). I have downloaded the ROM again and still get this error.
Any helpers out there??
Thanx
Fahd
I had the ame problem mate. What you need to do is revert back to the original 02 WM5 Rom which can be found on this forum somewhere. Then once installed, run uspl & then the BB4 Rom & hey presto your sorted.
For some reason i couldnt get uspl to work on WM6 02 rom either
Hi fadhp,
Ensure that your windows firewall is disabled and also you shut down any anti-virus programs running on your PC
I also found that turning off all the plugins on the today screen helped me to upgrade my O2 orbit.
I went through the same issues as you with corrupted images at 2% , however following the steps above helped me.
The firewall was disabled and so was AV ... so not sure about next steps.
I thibnk I shall try downgradind to original O2 WM5 rom and then upgrade ....
question is where in this forum is that Rom!! I had seen it before but as usual when u dnt need something you find it and when you need it u cant!
Will keep on searching .... anyone know the link plz save me some time!
Thanx
F
question is where in this forum is that Rom!!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=314866&page=2&highlight=orbito2uk-wm5
The link for the original O2 WM5 is in post #13, the 3rd one down.
Thanks for that.
Downgraded to WM5 now .... and tried to run BB4 .... still no joy. Same error.
Maybe i'll try another ROM just to see if that works and if it doesnt then MUST be my PC or something.
Here goes!
Cheers guys will kepp u posted.
F
Tried another machine ..... XP SP2 not FW or AV still failed.
Always get to 3% then crash.
HELP!!
Tried BB3.7 still no luck. 3% and crashes .... on 2 diff PC's.
I noticed that USPL runs ver 3.0.3.0 of the update utility but the actual ROMS when you launch them are running 3.6.3.6 ... does this make a difference?
Help guys plz!
Those are the issue no's of the rom upgrade utilities - it does not matter. It appears you are still not cid unlocked. whats your spl no? take it from first bootscreen.
SPL is 1.25.0000
IPL is 1.25.0001
Ideas??
The spl from uspl is 1.110000 so you need to run uspl again. Even if the screen goes blank wait till it says your rom has been upgraded.
Thing is when i run USPL and it gets to 100%, all i get is a white blank screen and nothing happens. So i have to reset the device.
Then i try and run the BB4 etc install and get to 3% before it conks out.
When I get the white screen ... what else can i do??
Some people had to run uspl 3 times in a row for it to work. Did you wait a while on white screen before giving up? I guess you are on 02 wm5 at the moment if not flash to that and try again. If you are do a hard reset and try again - few times in a row.
OK looks like USPL doesnt work for me!
Everytime I ran it under WM5 i still had 1.25.0000 and then i upgraded ROM to O2 WM6 and now everytime I run USPL it stays at 3.04.0000.
It doesnt do anything after the white screen ..... just sits there like a duck!
With so many ppl having succesfully done this surely someone can be a Wizard of Orbit??
fahdp said:
Thing is when i run USPL and it gets to 100%, all i get is a white blank screen and nothing happens. So i have to reset the device.
Then i try and run the BB4 etc install and get to 3% before it conks out.
When I get the white screen ... what else can i do??
Click to expand...
Click to collapse
Had same problem. Dont reset the phone but just if you see only the black screen, run the USPL update.
I have an orbit and uspl flashed first time from wm5 and wm6 - is yours usa orbit? If you really cant run uspl then it will need cid unlock from imei check - it costs but you have permenant cid unlock so you need not worry again.
Hi all i am new to all this i tried to load a newer rom on my Imate it had an error and froze did a reset and now it only comes to the 3 colour boot screen i have tried a hard reset but no luck and have downloaded the offical rom again i can get into the bootloader screen by pressing camera button and on and connect with the usb the thing is how do I load the rom the Program"RUU program" says u must have a active sync connection and it will not work in the bootloader it says usb in the left conner but active sync will not work is there any other program that doesnt use active sync to load the rom to my phone i have been reading the forum and seen similar problems all with the reply load wizardlove cant find the it all the links are broken or doesnt excest I need to get my phone running asap and if i send it in it will only be returned inn 6weeks they say I am from south africa and the guys here can be a lot of help coz the know nothing so if anybody can help me please it would be great thanks
Which is your device a G3 or G4 ? post the IPL/SPL...? of the phone to determine the version. As far as it gets to bootloaders (tricolor screen) you are safe,its just a bad flash,nothing to worry,you'll soon have it working fine.
Which rom were you trying to upgrade to ? and what exactly were you doing.First, is your phone SIM/CID unlocked,if you were trying to upgrade to a latest wm6 rom,its essential to have the phone CID unlocked
Secondly,while in bootloaders, Activesync doesn't work,you got to have a working OS on the phone to sync with activesync,but when in bootloaders and usb appears in the bottom of the screen,you can flash the rom.
Cheers!
K Jam hangs at blue screen
Hi to all,
I have a K jam more then 1 years old. Now It is giving some probem. There is no display but only light in the screen but I make call and recieve calls!.
First time when problem arised. I pressed 3 battons(2 left side and 1 up side)the screen will became perfect and when I remove the battery & reinserted, the problem arised again. When I asked some 2 to 3 mobile service mens, thay told that there is a problem with OS (By reinstalling the OS it will be repaired). I think probem is with the strip connect motherboard to the LCD, that could be cuted but service mens told no, it is problem with OS.
Where I can get the OS, WM5 is preinstalled in it.
Still it did not open the mobile. Please help me
Many Thanks for all
Srikanth.K
hellol i m facing the same problem when i start my imate k jam it does nt boot to windows n stopd on three color screen wht to do now help me plz to sort out
I feel your Pain! im in the same boat the three colour screen! all my Imate only gives
me IPL 2.16.0001 an SPL 2.16.0001 not even an OS
i downloaded wm6 from here and i followed some step of senior member of these site.now i have a problem.when i upgraded my mobile restart after booting and again restart so i am in serious problem.what can i do now.any help.
my imate k-jam ipl 1.01 and spl is 1.06
please help me
Hi guys, please someone helpme.
Yesterday i install some app on my coocked diamond (Energy Room 3.0 Build 60509), the apliction is SPB Wirless Monitor. In the final proces of the instalation my Diamond hangs up and i was forced to remove the batery to cancel the instalation and restart it. After this issue my Diamond never start again so i made a Hard Reset without problem and reinstall the same Room. But now every time that i restart my diamond the same reinstall process begin. Sometimes he starts ok without the instalaltion wizard and then i can connect ActiveSync Without problems, but just sometimes. What should i o do??? I have Hard SPL 1.4. Should i upgrade to 1.93?? There is any way to let my Diamond with the original Rom and then flash it again???
Something important is that when the resintall is in process it seems like the operation system is running in background, i can see the EnergyRoom Toolbar on top of my diamond and sometime when i press the power button the ShutXP windows appears.
Thanks a lot guys for your help, and sorry for my very very poor english
Andres
andres_lol said:
Hi guys, please someone helpme.
Yesterday i install some app on my coocked diamond (Energy Room 3.0 Build 60509), the apliction is SPB Wirless Monitor. In the final proces of the instalation my Diamond hangs up and i was forced to remove the batery to cancel the instalation and restart it. After this issue my Diamond never start again so i made a Hard Reset without problem and reinstall the same Room. But now every time that i restart my diamond the same reinstall process begin. Sometimes he starts ok without the instalaltion wizard and then i can connect ActiveSync Without problems, but just sometimes. What should i o do??? I have Hard SPL 1.4. Should i upgrade to 1.93?? There is any way to let my Diamond with the original Rom and then flash it again???
Something important is that when the resintall is in process it seems like the operation system is running in background, i can see the EnergyRoom Toolbar on top of my diamond and sometime when i press the power button the ShutXP windows appears.
Thanks a lot guys for your help, and sorry for my very very poor english
Andres
Click to expand...
Click to collapse
Hello .. Don't Worry ! I had the same problem ..
First of all you have to update your HSPL to 1.93 Unsigned .. Here
And you have to follow these instructions .. Here (you can find the mtty on this forum or by searching in google) ..
Then Re-flash your rom .. preferably from your storage card ..
Skoo
Skoo said:
Hello .. Don't Worry ! I had the same problem ..
First of all you have to update your HSPL to 1.93 Unsigned .. Here
And you have to follow these instructions .. Here (you can find the mtty on this forum or by searching in google) ..
Then Re-flash your rom .. preferably from your storage card ..
Skoo
Click to expand...
Click to collapse
Thanks mate, im doing right now
Hi i am new in this forum but really old on the bussines, well the problem with my phone is that seems to be bricked, sometimes turn on hangs on operator logo and put black screen sometimes can get on boot mode some not, its an strange problem, already tried to flash with micro SD but no luck, i get the phone is this state to repair.
This is what i get when i put phone on boot mode:
IPL: 1.12.0001
SPL:1.12.0000
The phone is from the operator TIM Italy i will really appreciate if u help me to solve this insue.
Br,
Tito Millo
Standard ROM or Cooked One? Have you Used USPL before flashing?
D'rath
PS: I buyed a TIM Artemis for my girlfriend, I changed the ROM and no problems
Standar ROM yes i have tried to use USPL but no luck cuz phone doesnt turn on at all and i cant sync with active sync
Br,
Tito Milo
Hey guys.
Im trying to upgrade my O2 Atom life from WM 5 to the latest O2 official 6.5 WM ROM.
When i tried updating normally by connecting my phone to computer and running the rom setup... my upgrade process gets stuck at Stage 4 with 0%.
If i put my phone in bootloader screen and then upgrade, i get Customer and model ID error.
After reading this forum I tried changing Pass.32 file properties from WWE to CHT and still i get the same customer and model ID error.
I even tried uploading those two files al1.dio and ext rom to a mini sd and upgrade through bootloader that doesn't seem to work either.
Can someone please guide me what else can be done step by step.
Thanks alot in advance for helping.
Ps - im using latest Windows Device center with windows vista.
hey
hey guys... please help... my WM5 keeps shuttin off by itself... really need to upgrade. thanks.
hey
hey guys... any help would be appreciated.... my phone turns off on its own and then when i click power on.. it goes straight to DSUU white screen and has to be factory reset so can't really deal with it.. please help upgrading would help.
Have you read here?
http://wiki.xda-developers.com/index.php?pagename=HTC_Atom
Hope it helps and good luck,
hey
hey sorry. yeh i have read that page... nothing helps me there... ok so i got my phone upgraded somehow to the latest 6.5.... but i'm facing same problem.. whenever phone turns off or restarts it goes straight to DSUU white screen.. and the only way to come out of it is by ressetting the phone to factory by pressing record + power button n pressing the hole.... to restart.
not sure whats wrong with it.
Have you asked on atom section?
perhaps there you can have more chances
hey
hey.
yeh i will post it there as well... people don't really respond nowadays!