I hope that somebody can help me.
How can i change the duration of the Dail tone
so that when i press the * or # key it will last 250 miliseconds.
I need it to reset my home alarm in case it goes off.
So with a normal Nokia or Samsung phone it works but with my MDA the Alarm-unit doesn't get the correct * tone (to short)
Tuurtje
the button tones are stored somewhere in the registry somewhere (i can't find them right now). probably you could change it in there. Not the duration, but change the complete wav.
Although I'm not sure this would have effect on the actual tone being sent.
Maybe you can just play a sound on your xdaII and your phone would 'hear' it. Long time ago i had a kind of tone dialer which i had to hold against the mic of a telephone to simulate a tone-dialing phone.
@M4io
I checked all the *.wav and *.mid but i could not find a file for the
1 2 3 4 5 6 7 8 9 0 # * buttons.
So i think it's somewhere in the registry, but i do not know where.
Thanks for trying
HKCU/Controlpanel/sounds/Dtmf*
but don't know how to manipulate them
@m4io
Thanks are underway now.
Only need to find proper wav for * key
Change Dtmf tone with PHM Registry Editor:
HKEY_CURRENT_USER/Control Panel/Sounds/
Choose Dtmf number (0-9, also # and *)... Dtmf0, Dtmf1 etc
Rename 'Sound' to 'Sound2' (as backup)
Select: Edit - New String Value
Value name: Sound
Value Data: pathname of wav ( \Storage Card\10.wav for Dtmf*)
I now have a voice from TomTom connected to it and it works
So pressing the * key i will hear 100 yeards
So thanks for the hint
Tuurtje
Does not work
Even that i change the build in tone to a wav file the duration is still way to short.
I build a wav file of 500 milliseconds but when i press the * key it only last about 100 milliseconds.
So i hope that somebody knows a way to increase the time the tone is send over the telephone-line.
You can check it by pressing a dial key and keep pressing it. It will only generate a very short duration. While i want it to last as long as i press the key.
Tuurtje
Hi guys,
I have been using Uni for almost a year. The most annoying thing about Uni is I always miss a call whenever someone calls me. The reason is, the uni only starts ringing after 4-5 seconds (sometimes more) after the caller dialed my number. By the time I want to accept the call, the caller has already hung up.
I have tried to search through the forums but couldnt find any posts regarding this issue. (Maybe I never look hard enough). So I post it here since there are so many senior Uni user here and someone might give some ideas how to resolve it.
Thanks in advance.
Hello all, I am new the the forum !
I have the same problem on my qtek 9000. On top of that is the volume of an incomming phonecall not load enough. I am using a program called ringo ringtones in order to use MP3 as ringtones.
As a PDA is the 9000 great but as a phone...well it could be a lot better.
Anybody any idea what could be the reason of the delay of an incomming phonecall and the low volume...
Rgds
Yves
Did not have low volume problem since last orange Rom (June 06)
for Ring delay you can use : Tweaks2k2
http://www.tweaks2k2.com/portal/staticpages/index.php?page=20050224182009983
The volume is loud enough if a listen to the ringtone in ringo ringtones or even in windows, but when I receive an incoming call there is a big difference in the volume...
the problem usually comes when you use vibrate with tones. try to remove the vibrate and you would notice that the phone responds much faster with just the tones.
poussin69 said:
Did not have low volume problem since last orange Rom (June 06)
for Ring delay you can use : Tweaks2k2
http://www.tweaks2k2.com/portal/staticpages/index.php?page=20050224182009983
Click to expand...
Click to collapse
Is there a way other than using tweaks2k2? For example registry modification..
Yes, I have switched to tones only and the phone starts calling after the 1st ring...even the volume seems solved now...
THX guys...!
Yves
Ring Delay Solved
Someone told me to look here
http://forum.xda-developers.com/showthread.php?t=258109
Interesting...but it seems that it only works with wav. files.
I have a mix of MP3 and Wav files. I wil use Audacity to boost the volume of the mp3 files...Will keep you updated...
Rgds
Yves
satanisme said:
Someone told me to look here
http://forum.xda-developers.com/showthread.php?t=258109
Click to expand...
Click to collapse
I actually downloaded the cab files and tried it on my Uni. And it worked like a charm. You can hear the ring almost immediately after the caller calls, and the ring volume is loud enough. The catch is, you have to use 'ring' only and .wav files for your ring tone.
But, when I'm in standby mode, the delay is still there. It takes time for it to power up and ring. So I disable power off and close the clamshell to conserve battery power. The device works good in power up mode, not in standby mode.
When I have the Q in StBy mode in ring only, it takes 1 ring before my phone starts calling...Thats an acceptable delay for me. I am not gonna instal the cab files as I would like to keep using MP3 and wav files...As my wife complained about here P800 being not loud enough I will try to boost the volume of here ringtones using the program audacity. I will be happy if I could solve it in this way!
Rgds
Yves
satanisme said:
Is there a way other than using tweaks2k2? For example registry modification..
Click to expand...
Click to collapse
Change ringtone/vibrate/LED flash characteristics
If you would like more control over how your device rings/vibrates/flashes its LEDs on events, you can can change the Script values of these events. For example, for an incoming call performing 'activate device, play ringtone, wait 3 seconds, repeat':
HKCU\ControlPanel\Sounds\RingTone0\Script = "apw3r" (REG_SZ string, no quotes)
For performing 'active device, set volume to 33%, play ringtone, set volume to 67%, play ringtone, set volume to 100%, play ringtone (no repeat)':
HKCU\ControlPanel\Sounds\RingTone0\Script = "ac33pc67pc100p" (REG_SZ string, no quotes)
The following are the full codes available to you. Please note that all the codes are executed simultaneously except after a ringtone play / wait code. E.g. 'v1p' will vibrate and play at the same time, while vibrating for 1 second. But 'pv1' will play the ringtone through all the way first, then start vibrating for 1 second.
a = activate device
cN = set volume to N in percentage max volume
fN = flash notification LED for N seconds
p = play ringtone. Note that this will play the ringtone all the way through before continuing with the next code.
r = repeat. Note that this should be the last code in your Script string, if used at all.
vN = vibrate for N seconds
wN = wait for N seconds. Note that the device will wait this long before continuing with the next code.
niketkumar said:
Change ringtone/vibrate/LED flash characteristics
If you would like more control over how your device rings/vibrates/flashes its LEDs on events, you can can change the Script values of these events. For example, for an incoming call performing 'activate device, play ringtone, wait 3 seconds, repeat':
HKCU\ControlPanel\Sounds\RingTone0\Script = "apw3r" (REG_SZ string, no quotes)
For performing 'active device, set volume to 33%, play ringtone, set volume to 67%, play ringtone, set volume to 100%, play ringtone (no repeat)':
HKCU\ControlPanel\Sounds\RingTone0\Script = "ac33pc67pc100p" (REG_SZ string, no quotes)
The following are the full codes available to you. Please note that all the codes are executed simultaneously except after a ringtone play / wait code. E.g. 'v1p' will vibrate and play at the same time, while vibrating for 1 second. But 'pv1' will play the ringtone through all the way first, then start vibrating for 1 second.
a = activate device
cN = set volume to N in percentage max volume
fN = flash notification LED for N seconds
p = play ringtone. Note that this will play the ringtone all the way through before continuing with the next code.
r = repeat. Note that this should be the last code in your Script string, if used at all.
vN = vibrate for N seconds
wN = wait for N seconds. Note that the device will wait this long before continuing with the next code.
Click to expand...
Click to collapse
Thanks for the info. I just donno why my device takes so much time to power up from standby. The delay still there when I'm in standby mode.
satanisme said:
Thanks for the info. I just donno why my device takes so much time to power up from standby. The delay still there when I'm in standby mode.
Click to expand...
Click to collapse
Check out my thread here - maybe this is what you're experiencing
http://forum.xda-developers.com/showthread.php?t=281735
satanisme said:
Thanks for the info. I just donno why my device takes so much time to power up from standby. The delay still there when I'm in standby mode.
Click to expand...
Click to collapse
Try this
"HKEY_LOCAL_MACHINE\System\StorageManager\FATFS\"
Change "CacheSize" value from "0" naar "4096".
"HKEY_LOCAL_MACHINE\System\StorageManager\FATFS\CacheSize=0x1000(4096)"
Change "EnableCache" value to "1"
"HKEY_LOCAL_MACHINE\System\StorageManager\Filters\fsreplxfilt\"
Change "ReplStoreCacheSize" value to "4096"
niketkumar said:
Try this
"HKEY_LOCAL_MACHINE\System\StorageManager\FATFS\"
Change "CacheSize" value from "0" naar "4096".
"HKEY_LOCAL_MACHINE\System\StorageManager\FATFS\CacheSize=0x1000(4096)"
Change "EnableCache" value to "1"
"HKEY_LOCAL_MACHINE\System\StorageManager\Filters\fsreplxfilt\"
Change "ReplStoreCacheSize" value to "4096"
Click to expand...
Click to collapse
Doesnt work either.
But I solved the problem already thanks to craigiecraigie4 hints, I just need to transfer my ringtones and contact pictures to internal memory instead of storage card and the delay is gone. Maybe I'm using a low speed storage card so it takes time to access all the data from there.
Hello,
been searching/investigating this problem for a while and still can't find a solution.
basically, when using the stock wired headset, I find the volume during a phone call far too loud and not loud enough when listening to mp3s / radio.
when in a call, using the volume button does not seem to make any difference.
any suggestions?
thanks in advance
Go to your music tab in Manila/TouchFlo. From the menu you can choose Audio Booster. This could solve your problem with the not loud enough mp3.
For the phone "too loud" problem you can go to the settings tab -> Sound. There you have two volume controls; Ringtone and System. Lowering the system could solve your problem. But lowering using the touch volume button (as your stock headset doesn't has volume controls if i'm right), should lower the sound during a phone call.
You can push the volume buttons on the left side of the phone. Problem with this is it jumps in big increments.
But it'll also change the volume of your ringtones as well. So what you can do is:
Settings tab -> Sound -> Turn "Single Volume" off
Now when pressing the hardware key, you'll see it bring up System & Ring Tabs. So you can control your music volume without changing the ringtone volume
charlie_82 said:
You can push the volume buttons on the left side of the phone. Problem with this is it jumps in big increments.
But it'll also change the volume of your ringtones as well. So what you can do is:
Settings tab -> Sound -> Turn "Single Volume" off
Now when pressing the hardware key, you'll see it bring up System & Ring Tabs. So you can control your music volume without changing the ringtone volume
Click to expand...
Click to collapse
I forget to mention this, thanks charlie
I have the following issue myself:
Regardless how set up (single volume on/OFF, System volume set to 20% or 100%) my in-call volume of voice, once the call has started is extremely LOUD, regardless of who calls and how loud they speak.
This is even more so, if I'm using the wired headset.
Using the side volume buttons during a call do show the volume animation AND the volume bar goes down, but the actual in-call volume doesn't change a bit.
This is maddeningly loud.
Is this how it should be working?
I have stock 6.5 ROM (WWE), no hacks.
Same problem here...
... any solutions?
I have single volume turned off, and regardless if I try to turn down "ring" or "system" volume, the headset stays extremely (uncomfortably) loud...
Cheers,
Jan
Having the same problem. Is there a fix?
Not sure if Volumex fixes it on the TP2, but on my TP1 and HD2 no such problem.
i have the same problem. Volumex doens't fix it.
It's incredible that there is no solution for this stupid problem.
JanScheerer said:
... any solutions?
I have single volume turned off, and regardless if I try to turn down "ring" or "system" volume, the headset stays extremely (uncomfortably) loud...
Cheers,
Jan
Click to expand...
Click to collapse
My stock headset has a volume control, I gather yours doesn't have this feature?
no i haven't this features..
however i found the possible solution (it work for me), searching in other topic of this forum.
You mast edit the file audiopara3_TMO.csv (windows folder, it is hidden so you must use an explorer which allows to see the system hidden file like resco explorer).
basically you have in this file these lines:
F0,PHONE_HEADSET_VOL0,0,4000,4000,0,4000,C8,0,2000,0,780,FF9A,2580..
F1,PHONE_HEADSET_VOL1,1,4000,4000,0,4000,1F4,0,2000,0,780,FF9A...
F2,PHONE_HEADSET_VOL2,2,4000,4000,0,4000,5DC,0,2000,0,780,FF9A...
F3,PHONE_HEADSET_VOL3,3,4000,4000,0,4000,1388,FFFF,2000,0....
F4,PHONE_HEADSET_VOL4,4,4000,4000,0,4000,2EE0,FFFF,2000,...
F5,PHONE_HEADSET_VOL5,5,4000,4000,0,4000,61A8,FFFF,2000...
the most important value is the sixth (in hexadecimal) which is the volume value. if you use the volume level on the left side of the phone the volume of the the headset changes according the value reported in this file. I edit these values according to my "ears" ranging between c8(volume=200) and 61A8(volume=25000), and i clearly feel the change in the volume when i use the headset (you need an hex-decimal converter, there are several online)
actually (as suggested in other topic) you must point in the registry editor to this file, creating the value
HKLM\drivers\builtin\wavedev\AcousticFile and set this value to \windows\AudioPara3_TMO.csv (or rename the file as u want but with extention csv)
After editing soft reset.
In this file there are the other volume values for calls without headset, with the bt, and with the carkit. these values are in the lines
F6,PHONE_HANDSFREE_VOL0...
F12,PHONE_EARCUPLE_VOL0...
F18,PHONE_BTHEADSET...
F19,PHONE_CARKIT.
i suppose that to change the volume values on must changes the sixth parameter as in the previous case.
This works for me, and solve the problem.
I link the original discussion which helps me to find the solution:
forum.xda-developers.com/showthread.php?t=550784&highlight=audiopara
charvellano said:
no i haven't this features..
however i found the possible solution (it work for me), searching in other topic of this forum.
You mast edit the file audiopara3_TMO.csv (windows folder, it is hidden so you must use an explorer which allows to see the system hidden file like resco explorer).
basically you have in this file these lines:
F0,PHONE_HEADSET_VOL0,0,4000,4000,0,4000,C8,0,2000,0,780,FF9A,2580..
F1,PHONE_HEADSET_VOL1,1,4000,4000,0,4000,1F4,0,2000,0,780,FF9A...
F2,PHONE_HEADSET_VOL2,2,4000,4000,0,4000,5DC,0,2000,0,780,FF9A...
F3,PHONE_HEADSET_VOL3,3,4000,4000,0,4000,1388,FFFF,2000,0....
F4,PHONE_HEADSET_VOL4,4,4000,4000,0,4000,2EE0,FFFF,2000,...
F5,PHONE_HEADSET_VOL5,5,4000,4000,0,4000,61A8,FFFF,2000...
the most important value is the sixth (in hexadecimal) which is the volume value. if you use the volume level on the left side of the phone the volume of the the headset changes according the value reported in this file. I edit these values according to my "ears" ranging between c8(volume=200) and 61A8(volume=25000), and i clearly feel the change in the volume when i use the headset (you need an hex-decimal converter, there are several online)
actually (as suggested in other topic) you must point in the registry editor to this file, creating the value
HKLM\drivers\builtin\wavedev\AcousticFile and set this value to \windows\AudioPara3_TMO.csv (or rename the file as u want but with extention csv)
After editing soft reset.
In this file there are the other volume values for calls without headset, with the bt, and with the carkit. these values are in the lines
F6,PHONE_HANDSFREE_VOL0...
F12,PHONE_EARCUPLE_VOL0...
F18,PHONE_BTHEADSET...
F19,PHONE_CARKIT.
i suppose that to change the volume values on must changes the sixth parameter as in the previous case.
This works for me, and solve the problem.
I link the original discussion which helps me to find the solution:
forum.xda-developers.com/showthread.php?t=550784&highlight=audiopara
Click to expand...
Click to collapse
Thanks, this worked like a charm!
charlie_82 said:
You can push the volume buttons on the left side of the phone. Problem with this is it jumps in big increments.
Click to expand...
Click to collapse
I know this is probably stating the obvious, but if you press the volume button and you see the volume bar you can always adjust it to your liking by swiping your finger up and down on the volume bar. This way you can get the inbetween volumes between too loud and too low.