WM6 Voice Command 1.6
Voice Command is a very powerful program that will allow you to control your WM6 Excalibur with your voice.
Hands-free phone
Dial your phone by voice using the phone number
Contact lookup
View contacts with a voice command
Have the subject, time, and location of upcoming appointments read to you
Media player
Program starter
Device Status
Enable Voice Command
Start > Voice Command
Voice Enabled > Yes
Announcement Routing > Bluetooth if Available
This setting will allow Voice Command to use the Excalibur phone speaker to respond to vocal commands, if you don't have a bluetooth headset connected.
IMPORTANT: Soft Reset to enable the changes to Voice Command
After the soft reset, press and hold the home key. This is the default Record Application Button which activates Voice Command. When you hear the beep say, "Help". Voice command will then guide you through the available voice commands.
IMPORTANT: Do not talk directly into the microphone. Hold the phone 4 inches/100mm from your voice. The response from Voice Command will take a few seconds.
A Voice Command tutorial from Microsoft is here.
Enable Voice Command with a Bluetooth Headset
With the current beta release of WM6, you need to modify the following registry settings to use your bluetooth headset with this feature.
NOTE: Your Excalibur has to be application unlocked to make modifications to the registry.
HKLM\SOFTWARE\Microsoft\Bluetooth\AudioGateway\BTA GExtModule
The string value needs to be changed from "OEMAGW.dll" to "\Windows\vcbthag.dll".
IMPORTANT: Soft Reset to enable the changes to Voice Command
After the phone reboots, your bluetooth headset will now be able to use Voice Command by pressing the button on your headset. Wait for the beep, then speak the command.
Viel Spaß mit Voice Command,
jromney
QVGA Landscape WM6 Compatibile Home Screens
thanks you
Most of time, Voice Command works fine, but those times it doesn't more than make up for the times that it does
Great job with this, it's working pretty good for me with my BT headset. Very nice!!!!
add voice tag feature is gone.
I tried voice command 1.6 did not like it and now my dash has no add voice tag feature. How do I get it back?
Try a hard reset?
dluser said:
I tried voice command 1.6 did not like it and now my dash has no add voice tag feature. How do I get it back?
Click to expand...
Click to collapse
Try a hard reset. That should restore it to factory settings. You'll have to input your ActiveSync settings again and install any other apps you want.
I agree. I have VC1.6 on my WM6 and I am really dissapointed with my experience. I watched that very detailed video tour of the program before it was released and it made it seem like it cooked dinner, shoveled the snow, and aced all my exams. However, I find myself constantly arguing with the stupid lady voice about her being deaf, not being able to pronounce/recognize the right way my friends are called, and just being plain dumb. I thought it would be really useful while driving, but 80% of the time I give up and press the keys away to get what I want.
No thanks!
I Love Miss Botron's Voice, Works like a Charm!
To jromney: well said, thanks guy, it works like a charm on my Dash! Now I love VC, like you said, it a powerful application. I have Miss. Botron's voice volume turned up to the max. The Girl is alright with me!(lol) We talk all the time!(lol) By the way jromney, you got the best VC bluetooth headset fix on the planet, so easy a caveman can do it! (lol) Works perfect with my Plantronics 590A bluetooth headset!
Nice Software + voice speed dial
For those of you that have problems dialing strange non English names I fod a good way of dialing. In my HTC p3300 I have a software called Voice speed dial. With it I can make a voice tags forall my contacts. Then on my BT a2dp I press the utton for voice dialing, then I say "Start Voice Speed Dial" then it turnes on the voice speed dial and I say the name "name" and then the voice speed dial recognizes it on the spot.
I works very nice.
Would anyone like to share the file for voice command or split the cost on the purchase from handango. I do miss that feature of having messages read aloud and commanding programs via voice.
???
i am pretty new to the whole voice command thing and i know that it CAN read my text message out loud, i just don't know HOW to make it happen, please help me
thanks in advance
Sick of Microsoft voice commander 1.6 problems on wm6??
Try this great alternative "Vito Voice2Go v1.51"
Just search it in ed2k or p2p search engine by:" Vito Technology Vito Voice2Go v1.51 Xscale Wm2003 Wm5 Wm6 Cracked-Sympda.zip"
Don’t forget to disable the "mwc 1.6" if you installed it earlier
And make sure you change the voice command button to "voice2go" program
Didn’t try it yet with Bluetooth headset
All the best Miteranix
wm6 voice command
i just installed this on my dash(updated to 1.33 htc rom) my home button is using to voice tag crap does anyone know how to fix it to voice command... everything about the program works it just doesnt let me use the home key to activate can anyone help?
thanks a bunch!
Just got a Dopod C730 and I want to add the Cyberon Voice Speed Dialer for WM6 (Smartphone). I got plenty of applications for a WM6 Pocket PC, but can't get them to work properly on this Smartphone. Currently using MS Voice Command, but prefer the HTC Voice Tags way of dialing.
Any help would be APPRECIATED!!! Thanks!
As the title says... is Cyberon Voice Commander the same as Microsoft Voice Commander? ie, is it just rebadged?
The Dopod roms come with Cyberon Voice Commander, I want to know if I should consider removing it and installing Microsoft Voice Commander.
Anyone?
No, they're totally different. It makes me laugh because Microsoft's program is call Voice Command, and this is called Voice Commander.
In that case which one is better? (objective question I know but hopefully there is a consensus on this)
Ok, I installed MS Voice Command and it isn't working properly on my BlueAnt headset. When I hit the button on the headset it start Voice Command however the audio from Voice Command comes through the handset speaker and the audio is picked up from the handset too (rather than the bluetooth headset). Once I initiate the phone call it comes through on the bluetooth headset fine.
Any ideas? I checked the settings for Voice Command and it is set to go through the headset.
I have tried both the Cyberon and Microsoft products and neither work that well for my Aussie accent!
I've ditched them both for Cyberon Voice Speed Dial.
I just upgraded my Dash with the new WM6 ROM and the Voice Command does not announce incoming calls. It does announce incoming messages. When I had the T-mobile WM6 installed, it was working fine.
Does anyone know what the problem is?
ahukki said:
I just upgraded my Dash with the new WM6 ROM and the Voice Command does not announce incoming calls. It does announce incoming messages. When I had the T-mobile WM6 installed, it was working fine.
Does anyone know what the problem is?
Click to expand...
Click to collapse
Not sure why you are not getting announcements, but Voice Command is in the T-Mobile WM6 ROM and doesn't need to be installed. Your phone was probably using the ROM version at the time.
I know the T-mobile rom has it and it works fine but it does not work with the new htc wm6 rom. Messages are announced but not the calls.
Does anyone else have the same problem?
Yes, I have the same problem with the O2 WM6 ROM (xda Orbit) and Voice Command 1.6. (Voice Command is not included in this ROM). Messages are announced, calls not. It seems a generally problem. Many users in the ppc-welt forum report this issue with voice command and WM6.
I have the same problem with a s621 running WM6. I believe it is a pretty well know bug.
Voice Command announce Call fix?
Has anyone found a fix for the WM6 bug that prevents Voice Command 1.6 from announcing incoming calls over device or bluetooth. Microsoft seems clueless--even though the issue has been around for months. The T-Mobile WM6 ROM includes Voice Command, fixed it, and it announces calls over BT, so it can be done. But Voice Command installed on the HTC and Rogers ROMS (not included in the ROMS) just won't announce calls.
I really miss not having to fumble for the phone to see who is calling.
Hello, I have a dash and have completed the 6.1 rom flash. When I was setting up I chose the cyberon voice command instead of the MS voice command. Can you advise how to change back to the MS voice command. I have been looking through the settings for hours.
I thank all the cookers for all the smart work and upgrades on here.
Kevin