I tried several times but I cannot sync my new XDA Orbit via Bluetooh. ActiveSync does not find my device although I did it the help-file told (choose the right COM-port). Could the reason be that I am using the WIDCOMM BT driver instead of the pre-installed standard Win XP-driver?
Same problem
Hi all. A have the samу problem with connection activesybc via bluetooth. When a want o connect my device say me that is no partnership to connect. What a reason. No posts about this a find
P.S. Sorry for my bad english
http://www.europe.htc.com/support/faq.html?id=167
awell done. synced
Hi.
May I know where you got your Widcomm BT stack for the Artemis?
Thanks
no. my artemis has a standard build in bluetooth drivers but for the first time i had aproblem whit them
I had this problem trying to sync with my Dell PC using its built in bluetooth hardware and the Widcomm stack. No luck at first, but I solved it by uninstalling the Widcomm stack in device manager, then allowing XP to re-discover the hardware and to install the alternative Microsoft stack. (XP SP2 only).
With XP handling the bluetooth, I had no problem pairing with the Artemis using instructions from here - http://www.geekzone.co.nz/content.asp?contentid=3163 .
Syncing is now straightforward.
F.
Okay, I've scanned the entire website and visited your links, I still cannot set up a bluetooth partnership with my P3300 and my laptop.
I'm using D-link DBT-122.. and it just doesnt connect.
What am I missing?
No one has any ideas?
Had to bump it because its frustrating to not be able to sync via bluetooth.
Anyone wid ANY ideas whatsoever?
I just managed to advance a bit on this path:
Thanx to a Hazymat over on xda-dev I managed to get it all working, his guide, for anyone else finding this:-
1) On your computer, go into bluetooth settings. Check bluetooth is ON and set to discoverable. Add an incoming COM port, eg. COM5.
2) On ActiveSync on your computer, go into connection settings. Tick all the boxes. If the COM port is greyed out, untick it, close the settings box, go back in, now tick it and set the COM port to eg. COM5.
3) On the K Jam go into bluetooth settings, and remove the connection to your computer.
4) On your K Jam go into ActiveSync, click 'menu' > 'connect via bluetooth' then you should see a message saying 'cannot find an existing bluetooth partnership with a PC that supports ActiveSync. Would you like to set up a partnership now?'
5) Click YES - you are taken to the Bluetooth settings screen.
6) Now click 'new partnership. As soon as you do this, the K Jam will search, and as long as your computer has bluetooth discoverable turned on, your computer will eventually be displayed. Check the computer name showing on the K Jam is the same as the name you gave the bluetooth profile on your computer.
7) On K Jam, click your computer name then NEXT.
Now enter a passcode - any four digit number (remember it) then next
9) When you do this, your computer will pop up with a message saying "a bluetooth device is requesting authorisation". Open this message and type in the code that you gave the K Jam. The next screen on the computer will tell you that it was successful - click FINISH.
10) Back on the K Jam, the screen will now be showing the services available. AS LONG AS YOU FOLLOWED STEP 1 and 2, ActiveSync will be an option, and you need to tick this and press FINISH on the K Jam.
11) Close bluetooth settings, now in ActiveSync screen click MENU > Connect via bluetooth. Your ActiveSync program on the computer should eventually pop up and connect.
The only port you worry about is the incoming pc one. Active Synch does the rest. You must see acitivesync as a service when you connect. I did not see it until I updated my Toshiba Bluetooth stack from thier website. Creating other ports can stop the synch from working.
Click to expand...
Click to collapse
(http://discussion.treocentral.com/wm-synchronization/104553-bluetooth-activesync.html)
The PC has an adapter managed by Widcomm stack (5.5.0.3200, latest so far). Only the "ActiveSync" service is set up as "Automatic", therefore immediately available. ActiveSync is version 4.5.
I do everything anew as instructed, my Hermes sees only the "ActiveSync" remote service. Sometimes it may stubbornly offer the "Serial Port" instead but after a few retries (yes, everything anew!) the correct service is seen. So far so good.
Then I create an outgoing port with same name as on PC. COM5 is apparently optimal at both sides. The PDA begins synchronization, the "Connected" sound is heard from PC... and almost immediately is followed by the "Disconnected" sound. The PDA additionally explains: "port is not available".
If I now refresh services visible via this partnership, the "ActiveSync" is replaced by "Wireless Stereo", "Serial Port" (checked), "Dialup Networking" and "Headset". This is a dead end. The stack on the PC somehow remembers this state and the correct choice of services won't be available anymore.
From now on I can do everything anew repeatedly, and if succeeded, all I get is that quick disconnection.
After installing the older v5.1.0.5600 stack the behaviour changed a bit. Instead of connecting/disconnecting an error message appears: "Synchronization cannot be completed successfully". Reinstalled the newer one, the appropriate behaviour returned.
Had no luck with the M$ stack altogether. The laptop manufacturer doesn't offer the Q323183 separately. Even if it is already included in SP2, I still must provide the kernel-mode drivers. The older Widcomm stack has them in a separate directory but they fail to install. Moreover I read somewhere that the M$ stack allegedly supports ActiveSync at a cost of absent RFCOMM support, and the latter is of paramount importance for me. Perhaps I'm destined to use cable (no problems with it).
Someone at experts-exchange.com states:
There are 2 major issues with activesync 4.x
1 - You cannot sync wirelessly
2 - You cannot sync via cable/cradle when the wifi card is active. If you are connected to a wireless network I would suggest you delete the connection and then try re-syncing.
If you do not need the latest version I would suggest you rollback to version 3.8 unless the above limitations dont affect you or you absolutely need the latest version.
Click to expand...
Click to collapse
If that only were an official M$ statement... And regarding older ActiveSync versions, those didn't work at all for me, as far as I remember.
Hi chaps,
Excuse what might seem like a stupid question from a newbie...but....got my new Orbit a couple of days ago....and straight away, the problems came in thick and fast!!
Has anyone successfully set one of these things up to Activesync via bluetooth??? Mine is stubbornly refusing to do so...
Also...my FM radio plays nothing but Simon and Garfunkel, since all I get is "The sound of Silence" Nothing....zip...zero is being played
It spat on my TomTom's auto install, until I handraulically installed the cabs, must say, this sat nav is head and shoulders above the same software on my old XDA II, using a wired GPS Antenna...nice
Anybody any ideas (I spent 2hrs on the phone with O2 about the bluetooth this week, and they just put their hands up in the air!!)
Nice site btw
Neil
Why not trying this here:
http://www.dpicts.com/axim/
Bluetooth Activesync works ok using the Microsoft XP SP2 stack instead of Widcomm or Toshiba:-
http://forum.xda-developers.com/showthread.php?t=288761
I tried and failed with Widcomm, but got it working 1st time once I used the MS stack.
Had the same problem with Tomtom. For me it was because my version of tt (5) was for an older version of WM. Installer didn't work, but manually dragged cabs were fine. I suspect tt6 installs fine.
F.
Mine is WIDCOMM, how to I get it to run the MS stack?
works fine with Toshiba, and the older versions of widcomm.
Toshiba stack always has an incoming port on com 7
set this and it will work fine (make sure you have the latest version of the stack from http://aps.toshiba-tro.de/bluetooth/pages/download.php)
Not tried with the latest versions cos my MIS key runs bluesoleil :-(
Try this
open my bluetooth places.
click bluetooth at the top of the windows (next to file, edit etc.)
click advanced configuration
click local services
note the port associated with the bluetooth serial port service.
open activesync on the pc
click file
click connection settings
set the com port here. (it must be lower than 20 for activesync 4.x)
click ok
open activesync on the device
tap menu
tap connect via bluetooth
tap yes when it asks about creating a pairing.
tap new device (if your device is already there, delete it. not totally necessary, but cleaner)
select your device and tap next
enter passkey
tap next
once it scans for services on the computer, it should find activesync.
tick it and tap finish
in activesync, tap menu
tap connect via bluetooth
should be gravy!
I'm pretty sure i have everything setup on the pc right. Serial port is configured in WIDCOMM drivers as COM5. Activesync is setup to listen for COM5.. but on the ppc all i see is a serial port selection in the bluetooth mgr and not activesync.. Anyone have any tips to get it working correctly?
It isn't real clear from your post, but I assume you are trying to set up bluetooth sync.
Some avenues for you to explore:
Have you set up a partnership through USB connection? If not, this should be first on your list of things to do.
Have you paired the devices? Turn your PPC to discoverable in bluetooth settings and have your PC search for new devices. The wizard should pick up the PPC and walk you through the pairing process.
Does your bluetooth module support the correct services? Older bluetooth dongles and radios might not support syncing pim info.
I have the exact same Problem.
Did everything like it is described here in the forums. Firewalls and antivir deactivated. Used the right COM ports. Settings in Active Sync match. Pairing successful. The WIDCOMM-Driver even renames the Serial Port to ActiveSync after pairing. But even after all that, if I'm trying to get a Connection from my phone by using the ActiveSync on my phone with "connect via bluetooth", I cannot see ActiveSync there, just Serial Port. Switching on the Beam (like in some boards suggested) had no success either.
I tried reinstalling all. I tried my desktop PC and my Laptop (same problem). ActiveSync does know the XDA when I'm using a cable. I tried deleting the profile and create it again. I tried the Microsoft bluetooth stack instead on my laptop. I tried using another COM-Port. I tried deleting the pairing from the registry on the phone.
I have a XDA Neo / HTC Prophet with WM6 ProphetTouchIX, an Anycom BT-200 Bluetooth Dongle with WIDCOMM based driver. WINXP SP2 with the newest Security updates and Active Sync 4.5.
If anyone has any new suggestions, please post them here. If you have the exact same problem, post here, what you've tried to solve it, maybe we can at least find out, what's causing it.
found this one here:
http://forum.xda-developers.com/showthread.php?t=287820&highlight=widcomm+bluetooth
seems to be the same problem.
if you have Touch IX installed, you need the bluetooth fix from here:
http://forum.xda-developers.com/showthread.php?t=342302 .
worked for me. Give it a try!
I have been trying all weekend to Sync my 8525 and my HP laptop via Bluetooth and it will not work! They are both paired and I can do just about everything with them both but sync with ActiveSync. I can use the phone as a modem, transfer files, use the laptop as an external stereo speaker and as a speaker phone but it will not sync with freakin' Activesync! Both the Laptop and the 8525 serial ports are set at Com8. When attempting to sync via bluetooth on the phones active sync all I get is:
"Cannot connect using Bluetooth to a PC that supports ActiveSync. You may be out of range. Would you like to create a Bluetooth partnership with a different PC?"
Oh my LORD!! This is becoming soooo anoying! I have tried searching here and through Google, I have tried just about everything to get this crap to work and so far NOTHING!!!!
I am at wits end! Please if you can help it would save my sanity!
-Cingular 8525
-Windows Mobile 6 Professional (OEM Rom downloaded from HTC website)
-Rom version 3.62.502.3
-Radio version 1.54.07.00
Thank You!
acuraman2004 said:
Both the Laptop and the 8525 serial ports are set at Com8.
Click to expand...
Click to collapse
Looks wrong to me, as PDA's COM8 is not laptop's COM8. I suggest you delete all the serial ports, and delete the partnership itself on both PDA and laptop. Then let ActiveSync establish it back as it wants.
Koterpillar said:
Looks wrong to me, as PDA's COM8 is not laptop's COM8. I suggest you delete all the serial ports, and delete the partnership itself on both PDA and laptop. Then let ActiveSync establish it back as it wants.
Click to expand...
Click to collapse
I have tried that before, and it still gave me the same message when trying
to sync. The laptop usually sets the com port to 8 and the phone sets the com port to 0, however this does not seem to sync. I will try it again tonight to see if maybe I missed something. Thank you for your suggestion.
If anyone else has any ideas I would love to try them.
Thank You!
For what it's worth, I'm able to sync my 8525 via Bluetooth ActiveSync with my Windows XP Professional notebook. It took a little finegaling, but I was able to make it happen. Unfortunately, the notebook is at home, and the phone is not allowed into my office. If you don't get it resolved by this evening, I'll try to post my settings after I get home.
Joe
marinerjoe said:
For what it's worth, I'm able to sync my 8525 via Bluetooth ActiveSync with my Windows XP Professional notebook. It took a little finegaling, but I was able to make it happen. Unfortunately, the notebook is at home, and the phone is not allowed into my office. If you don't get it resolved by this evening, I'll try to post my settings after I get home.
Joe
Click to expand...
Click to collapse
Thank you very much, from one Joe to another!
So......Huston we still have a problem. Deleting the two devices and repairing did not seem to correct the issue.
Hmmm. I have experienced this before, and have fixed it....somehow. Sorry. I have a Dell laptop (yeah ok, wotever!). Established activesync partnership via usb to start. Told phone to find new BT gear, paired with laptop, ticked every box that the laptop presented, including 'allow device to access activesync service'. In BT settings, laptop has activesync box ticked in list of services available. To connect, I go into comm manager, turn on activesync, menu, connect via bluetooth. All sweet. Running WM6.1, had it working on most of the WM6 roms too.
what bluetooth stack are you using on you laptop?
Umm.. would that be 'WIDCOMM Bluetooth Software 5.0.1.2609'? Dunno - whatever is installed on the Dell Inspiron 6400. Would be happy to provide any further info, if you can tell me exactly what it is you want and where I find it....
XtreMe_G said:
what bluetooth stack are you using on you laptop?
Click to expand...
Click to collapse
Does this help any?
ads2112 said:
Umm.. would that be 'WIDCOMM Bluetooth Software 5.0.1.2609'? Dunno - whatever is installed on the Dell Inspiron 6400. Would be happy to provide any further info, if you can tell me exactly what it is you want and where I find it....
Click to expand...
Click to collapse
oh, sorry ads2112, should have been clearer, i was asking acuraman2004 wat his bluetooth stack was, not you.......you dont have any problems with ur bluetooth and activesync right?
XtreMe_G said:
oh, sorry ads2112, should have been clearer, i was asking acuraman2004 wat his bluetooth stack was, not you.......you dont have any problems with ur bluetooth and activesync right?
Click to expand...
Click to collapse
You know what I am not sure as to where that information would be located on the laptop. I will search for the information once I get home from work and post it. Thank you for the reply.
Joe
acuraman2004 said:
I have been trying all weekend to Sync my 8525 and my HP laptop via Bluetooth and it will not work! They are both paired and I can do just about everything with them both but sync with ActiveSync. I can use the phone as a modem, transfer files, use the laptop as an external stereo speaker and as a speaker phone but it will not sync with freakin' Activesync! Both the Laptop and the 8525 serial ports are set at Com8. When attempting to sync via bluetooth on the phones active sync all I get is:
"Cannot connect using Bluetooth to a PC that supports ActiveSync. You may be out of range. Would you like to create a Bluetooth partnership with a different PC?"
Oh my LORD!! This is becoming soooo anoying! I have tried searching here and through Google, I have tried just about everything to get this crap to work and so far NOTHING!!!!
I am at wits end! Please if you can help it would save my sanity!
-Cingular 8525
-Windows Mobile 6 Professional (OEM Rom downloaded from HTC website)
-Rom version 3.62.502.3
-Radio version 1.54.07.00
Thank You!
Click to expand...
Click to collapse
Didn't have quite the same problem that you are having, but was having trouble. I found these instructions and took care of mine right away. The author, and the link to the site are listed in the instructions. I copied them to notepad so as not to lose them. Hopefully this will work for you.
BlueTooth Sync
I got my bluetooth to work by following Hazymat's guide: Here (http://www.modaco.com/Active_Sync_over_BlueSoleil_Blutooth-t232696.html) Excerpt:
Thanx to a Hazymat over on xda-dev I managed to get it all working, his guide, for anyone else finding this:-
1) On your computer, go into bluetooth settings. Check bluetooth is ON and set to discoverable. Add an incoming COM port, eg. COM5.
2) On ActiveSync on your computer, go into connection settings. Tick all the boxes. If the COM port is greyed out, untick it, close the settings box, go back in, now tick it and set the COM port to eg. COM5.
3) On the K Jam go into bluetooth settings, and remove the connection to your computer.
4) On your K Jam go into ActiveSync, click 'menu' > 'connect via bluetooth' then you should see a message saying 'cannot find an existing bluetooth partnership with a PC that supports ActiveSync. Would you like to set up a partnership now?'
5) Click YES - you are taken to the Bluetooth settings screen.
6) Now click 'new partnership. As soon as you do this, the K Jam will search, and as long as your computer has bluetooth discoverable turned on, your computer will eventually be displayed. Check the computer name showing on the K Jam is the same as the name you gave the bluetooth profile on your computer.
7) On K Jam, click your computer name then NEXT.
Now enter a passcode - any four digit number (remember it) then next
8) When you do this, your computer will pop up with a message saying "a bluetooth device is requesting authorisation". Open this message and type in the code that you gave the K Jam. The next screen on the computer will tell you that it was successful - click FINISH.
9) Back on the K Jam, the screen will now be showing the services available. AS LONG AS YOU FOLLOWED STEP 1 and 2, ActiveSync will be an option, and you need to tick this and press FINISH on the K Jam.
10) Close bluetooth settings, now in ActiveSync screen click MENU > Connect via bluetooth. Your ActiveSync program on the computer should eventually pop up and connect.
The only port you worry about is the incoming pc one. Active Synch does the rest. You must see acitivesync as a service when you connect. I did not see it until I updated my Toshiba Bluetooth stack from thier website. Creating other ports can stop the synch from working.
Steve Sharp said:
Didn't have quite the same problem that you are having, but was having trouble. I found these instructions and took care of mine right away. The author, and the link to the site are listed in the instructions. I copied them to notepad so as not to lose them. Hopefully this will work for you.
BlueTooth Sync
I got my bluetooth to work by following Hazymat's guide: Here (http://www.modaco.com/Active_Sync_over_BlueSoleil_Blutooth-t232696.html) Excerpt:
Thanx to a Hazymat over on xda-dev I managed to get it all working, his guide, for anyone else finding this:-
1) On your computer, go into bluetooth settings. Check bluetooth is ON and set to discoverable. Add an incoming COM port, eg. COM5.
2) On ActiveSync on your computer, go into connection settings. Tick all the boxes. If the COM port is greyed out, untick it, close the settings box, go back in, now tick it and set the COM port to eg. COM5.
3) On the K Jam go into bluetooth settings, and remove the connection to your computer.
4) On your K Jam go into ActiveSync, click 'menu' > 'connect via bluetooth' then you should see a message saying 'cannot find an existing bluetooth partnership with a PC that supports ActiveSync. Would you like to set up a partnership now?'
5) Click YES - you are taken to the Bluetooth settings screen.
6) Now click 'new partnership. As soon as you do this, the K Jam will search, and as long as your computer has bluetooth discoverable turned on, your computer will eventually be displayed. Check the computer name showing on the K Jam is the same as the name you gave the bluetooth profile on your computer.
7) On K Jam, click your computer name then NEXT.
Now enter a passcode - any four digit number (remember it) then next
8) When you do this, your computer will pop up with a message saying "a bluetooth device is requesting authorisation". Open this message and type in the code that you gave the K Jam. The next screen on the computer will tell you that it was successful - click FINISH.
9) Back on the K Jam, the screen will now be showing the services available. AS LONG AS YOU FOLLOWED STEP 1 and 2, ActiveSync will be an option, and you need to tick this and press FINISH on the K Jam.
10) Close bluetooth settings, now in ActiveSync screen click MENU > Connect via bluetooth. Your ActiveSync program on the computer should eventually pop up and connect.
The only port you worry about is the incoming pc one. Active Synch does the rest. You must see acitivesync as a service when you connect. I did not see it until I updated my Toshiba Bluetooth stack from thier website. Creating other ports can stop the synch from working.
Click to expand...
Click to collapse
Dude thank you! I will try that as soon as I get home!
I have it working on my desktop PC in front of me. Here's my setup:
PC:
IVT BlueSoleil v5 I think (the one that costs money but has a new slick interface)
Device Name: PokerPro
Device Type: Desktop
Accessibility: Allow other Bluetooth devices to find this device, Allow other Bluetooth devices to connect to this device
Services: Bluetooth Serial Port (COM4), Bluetooth Serial Port (COM5), Bluetooth Advanced Audio, Bluetooth Object Push, Bluetooth File Transfer, Bluetooth Personal Area Network. All have Security On (i.e. a secure connection).
Serial Ports: COM4: Direction Incoming. COM5: Direction Incoming.
Microsoft ActiveSync:
Connection Settings:
Allow USB connections
Allow connections to one of the following: COM4
This computer is connected to: Automatic
Open ActiveSync when device connects
I >don't< have "Allow wireless connection on device when connected to the desktop" set.
On my Phone:
Running WM6 (Windows CE 5.2.1933) (note not WM6.1) and Schap's 4.01 full rom
Bluetooth device name: "Dir Someone" (my name). I don't have OBEX enabled.
Within the Bluetooth settings:
PokerPro shows up as a device. If I select it, it shows Wireless Stereo (not ticked) and ActiveSync (ticked). This is the important bit - ActiveSync needs to show up as a service under your PC paired connection.
Mode: Turn On Bluetooth is ticked, but "Make device visible to other devices" is not ticked.
COM Ports: I don't have anything there aside from "New Outgoing Port".
FTP: Enable Bluetooth Explorer is ticked
Security: Authentication (Passkey) required is not ticked.
ActiveSync: I have "Synchronise all PCs using this connection" ticked, with the default " 'USB " selected.
When I select "Connect via Bluetooth", I get a message on my desktop saying the phone has connected, and ActiveSync turns green and starts spinning.
If I recall correctly, it took me a couple of goes before the ActiveSync service appeared under the PC paired connection (the bit in italics above). I don't recall how I got that working but it was just a matter of deleting the connection and letting them discover each other again I think.
I did a bunch of research and found a few articles that I read at the time, but because I'm using BlueSoleil it was slightly different for my setup. But you can get the general idea of what you need to do here.
Check My post here, it is on the butoom of the page!!
http://forum.xda-developers.com/showthread.php?t=347472
hth,
Stuart
Steve Sharp said:
The only port you worry about is the incoming pc one. Active Synch does the rest. You must see acitivesync as a service when you connect. I did not see it until I updated my Toshiba Bluetooth stack from thier website. Creating other ports can stop the synch from working.
Click to expand...
Click to collapse
I don't see "Activesync as a service" on my Cingular 8525. now AT&T, and I have their latest software. How do I get an update?
Steve Sharp said:
Didn't have quite the same problem that you are having, but was having trouble. I found these instructions and took care of mine right away. The author, and the link to the site are listed in the instructions. I copied them to notepad so as not to lose them. Hopefully this will work for you.
BlueTooth Sync
I got my bluetooth to work by following Hazymat's guide: Here (http://www.modaco.com/Active_Sync_over_BlueSoleil_Blutooth-t232696.html) Excerpt:
Thanx to a Hazymat over on xda-dev I managed to get it all working, his guide, for anyone else finding this:-
1) On your computer, go into bluetooth settings. Check bluetooth is ON and set to discoverable. Add an incoming COM port, eg. COM5.
2) On ActiveSync on your computer, go into connection settings. Tick all the boxes. If the COM port is greyed out, untick it, close the settings box, go back in, now tick it and set the COM port to eg. COM5.
3) On the K Jam go into bluetooth settings, and remove the connection to your computer.
4) On your K Jam go into ActiveSync, click 'menu' > 'connect via bluetooth' then you should see a message saying 'cannot find an existing bluetooth partnership with a PC that supports ActiveSync. Would you like to set up a partnership now?'
5) Click YES - you are taken to the Bluetooth settings screen.
6) Now click 'new partnership. As soon as you do this, the K Jam will search, and as long as your computer has bluetooth discoverable turned on, your computer will eventually be displayed. Check the computer name showing on the K Jam is the same as the name you gave the bluetooth profile on your computer.
7) On K Jam, click your computer name then NEXT.
Now enter a passcode - any four digit number (remember it) then next
8) When you do this, your computer will pop up with a message saying "a bluetooth device is requesting authorisation". Open this message and type in the code that you gave the K Jam. The next screen on the computer will tell you that it was successful - click FINISH.
9) Back on the K Jam, the screen will now be showing the services available. AS LONG AS YOU FOLLOWED STEP 1 and 2, ActiveSync will be an option, and you need to tick this and press FINISH on the K Jam.
10) Close bluetooth settings, now in ActiveSync screen click MENU > Connect via bluetooth. Your ActiveSync program on the computer should eventually pop up and connect.
The only port you worry about is the incoming pc one. Active Synch does the rest. You must see acitivesync as a service when you connect. I did not see it until I updated my Toshiba Bluetooth stack from thier website. Creating other ports can stop the synch from working.
Click to expand...
Click to collapse
Steve Sharp - thanks a TON for this post...I've been trying to get Activesync to work on my Tilt for about 3 weeks now.
thanks!