Hi there,
does anybody know how to connect a normal PC keyboard to the Artemis?
What driver is needed to proceed?
how do you want a normal pc-keyboard conneting to the mini usb on the artemis ??
imho you can forget it...
Hi, i think you can't using usb keyboard (drivers needed), but bluetooth with not problem.
I use the smart keyboard with mouse (ThinkOutside).
some pictures of my accessories
Sorry for the poor quality pictures, but have only a simple phone for it.
Related
hi i whant to now is there any fix to bluetooth mouse work with jasjar cause the mouse work but the arrow don't appear but i can clik on start ect ...
what do i do ?
the mouse is the omiz OMM810
Stowaway Travel Mouse
I have the same situation with bluetooth pilot kensington
I think that we need driver of mouse for universal
Someone already use both a mouse and a keyboard Stowaway Travel Mouse
Please search
:wink:
I have both stowaway mouse and keyboard working together. Their driver will display the cursor arrow when a mouse is connected. There is a WM5 version of driver on ThinkOutside's website.
If you are using a bluetooth mouse from other manufacturers, I remember there is a little Pocket PC utility somewhere on the Internet that will display the cursor arrow. The very first utility of this kind was developed for USB mouse to be used with USB Host-enabled PDAs. I presume that the same utility would also work with bluetooth mouse. Basically, the utility draws a cursor arrow on the screen. That's all it does.
Does anybody knows if it is possible to get "MS IntelliMouse Explorer for Bluetooth" to with Universal?
At home off course... the mouse is almost as large as the PDA
Is there any driver available?
Does the arow appears?
Conchas said:
Does anybody knows if it is possible to get "MS IntelliMouse Explorer for Bluetooth" to with Universal?
At home off course... the mouse is almost as large as the PDA
Is there any driver available?
Does the arow appears?
Click to expand...
Click to collapse
found this post while I was looking 4 the same thing!
http://forum.xda-developers.com/viewtopic.php?p=137702.
smells good, i'll give it a try
Anyone having fun yet?
It seems that on the JasJar any stowaway driver before ver 4.3 fails
The Cracks only seem to work on anything prior to 4.3
SO we are stuck between a Rock and hard place
Cant we hack the dll's again??
Who's up for trying :roll:
Regards
it worked perfectly with buzz 1.65... but with the new 2.00 it doesnt work anymore ;-(
from buzz's forum:
It seems the newer OS addresses the dll differently and therefore it fails to load. There is a new version of the Think Outside Stowaway driver 4.4 this loads fine, but does unfortunately only work with the stowaway hardware and not with the generic HID devices you and I have....
I hope someone can fix it up. I suppose the stowaway dll tries to identify the hardware and if someone is able to modify the dll not to verify the id of the hardware it should work fine once again.
someone able 2 help?
has anyone got this working yet?
with aku3.2 : the phone finds the mouse without the stowaway driver.. but needs an passkey wich isn't 0000 or 1234.. (altough I unchecked "secure connection") anybody an idea?
I don't think that's anything to do witn AKU3.2, it's just simply trying to pair with a bluetooth device.
I have paired my Microsoft BT mouse with my JasJar, but like most people, can not get the Stowaway drivers working.
I used to love using a USB mouse on my old Toshiba e800, I really wish I could with this too. I already have 3 bluetooth mice, I am not going to buy one purely for use with a PDA.
I think I've posted this question before (or am I dreaming?), but somehow, I can't find my original post
Is it possible to setup BA to appear as a Bluetooth input device (kbd/mouse) to a computer? That would mean to make it a HID-compliant device.
To re-iterate, I'm not interested in connecting external kbd to BA, i want the BA to be the keyboard for desktop computer!
Bemused is not quite what I'm looking for -- it's only for music and it's not native to Windoze Mobile.
Any ideas?
Mucho gracias!
OK, I think what I need is Bluetooth HID service on the phone.
I've applied BT patch from XDA-developers FTP and now in BT manager I have options to connect High Q Audio and External Keyboard, but that's about it.
Does anyone know which BT stack has it?
I have 1.40 Rom (WM2003) and Widcomm bluetooh
1.0.0 3900
thanks
Hi,
is it possible to use my MDA III, which is connected to pc over usb, as a bluetooth adapter in order to connect other devices to my computer?
Thanks in advance,
Paschulke507
Everything depends, what do you expect from this "combination". If you need full support for all BT features (direct access to BT stack like on the PC) - you can forget it. Just buy a chepest dongle for ~$10.
I actually want to do stuff like connecting a mobile phone to my computer and transferring small java games. Wouldn't such a combination over BA be enough to fulfill this purpose? I don't expect a fast connection or covering big distances.
You cannot do it directly.
Pair the phone with the BA, send the files to your BA and then beam the files to the phone. If it can accept beamed files, it should work (Nokias might refuse to start juch apps).
But the original cable for the phone is much better choice.
Ok, I'll try it this way. Thanks for your answers.
Hey guys in my searches i have found this little app. Theres an unlimited free trial available. it let's you connect any bluetooth mouse to your wm device. great app and would love to use a mouse in conjuction with my igo keyboard. I have tried pairing the mouse however it does not complete pairing and the mouse continues to sit in pairing mode. I have tried three seperate mice (logitech, targus and microsoft) If anyone is willing to give it a go and let me know how they go would be great.
Hopefully it will work for you.
http://www.teksoftco.com/index.php?section=blueinput
dlaponin said:
Hey guys in my searches i have found this little app. Theres an unlimited free trial available. it let's you connect any bluetooth mouse to your wm device. great app and would love to use a mouse in conjuction with my igo keyboard. I have tried pairing the mouse however it does not complete pairing and the mouse continues to sit in pairing mode. I have tried three seperate mice (logitech, targus and microsoft) If anyone is willing to give it a go and let me know how they go would be great.
Hopefully it will work for you.
http://www.teksoftco.com/index.php?section=blueinput
Click to expand...
Click to collapse
I used a Logitech V70 following the instructions on the site and it worked as advertised. I've also paired it with my Logitech diNovo Mini although not at the same time.
edit: Actually I installed the cab, turned on the radio, initiated a device search, then I turned on the V70 and pressed the connect button on the bottom. No password was required, I just clicked Next as soon as the mouse was recognized. I think this is a little bit different than the order specified on the website.
i'm encountering two main problems.
1) the Teksoft software is not recognising the bluetooth is on. I'm using the radio rom that comes with dutty's v1.7.
2) after I pair the mouse (with a blank password) it remains in discovery mode.
Just a bit of extra information i'm using the ig keyboard and have the igo software installed not sure if that could be causing problems. Also having read other forums the mouse i was trying to use was the microsoft 5000 and one of the guys had this working perfectly which leads me to believe its my phone.
Any help would be much appreciated.
Bluetooth stack on HTC HD2
Hi All,
I just got th HTC HD2 and I also run into difficulties connecting a bluetooth mouse. Looks like the problem lies in the Bluetooth stack.
I'm using a iGo/Thinkoutside stowaway bluetooth mouse and keyboard. The software (latest version from 2007) does not recognise that Bluetooth is on.
The keyboard is recognised as a standard HID device and works without any additional software.
I tried the Teksoftco Blueinput software and got the same problem that the software does not recognise that Bluetooth is on. Probably it only works with the MS bluetooth stack and not the one on HTC HD2 (TP2, HD, ...?).
I can connect to a bluetooth mouse but the HD2 can't find any services to use.
Anyway, If anybode has a solution please post but my hopes are verly low... :-(
Maybe a wired mouse via USB host on the car cradle will work...
HD2 with rii mini bluetooth keyboard
Hey, I have not tried to pair my bt mouse and keyboard together, however, I paired my rii mini bt keyboard and both the mouse and kb work! It is awesome. Let me know if you have any questions. Hope this helps.
anyone have the android.apk that comes on the cd?
its not on my cd and i cant pair it with my phone...
I've attached apk for Rii Mini for Android.
gonzalo_reyes said:
I've attached apk for Rii Mini for Android.
Click to expand...
Click to collapse
thanks man...
for some reason its not letting me connect to the net to register it.
rii
Did you have any luck registering, I'm running into the same thing?
No drivers on the cd.
The software doesn't work on my Touch HD
I tried the V 1.5RC4 but it always displays: "The BlueInput driver is not responding. You need to reinstall this software."
Is it possibly, that I have a altered bluetooth stack with my ROM (Energy)?
Would appreciate any help to get this to work!
playdo said:
The software doesn't work on my Touch HD
I tried the V 1.5RC4 but it always displays: "The BlueInput driver is not responding. You need to reinstall this software."
Is it possibly, that I have a altered bluetooth stack with my ROM (Energy)?
Would appreciate any help to get this to work!
Click to expand...
Click to collapse
I had exactly the same problem in my Touch HD with Energy ROM and found the solution. Our problem is because the bluetooth HID libraries are missing in the Energy ROM. Thus, first, you need to restore them by using TRV_Bth_HID.cab attached. Restart. Then, you need to pair your mouse and to ensure, that the service "input device" has appeared and marked in the bluetooth manager. Restart with the turned on bluetooth and the mouse connected. Only after these steps, you can install V1.5RC4. Note, that V1.5RC4 overwrites the library \Windows\bthhid.dll, which was in TRV_Bth_HID.cab. As a result, after V1.5RC4 installation, your mouse will be seen as "disconnected" in the bluetooth manager - this is normal. But, if you need to install new device, you will have to repeat all steps above.
Help
Please help if any body found. Rii mini bluetooth keyboard connected with desire hd
Advance thanks
nagagaya said:
Please help if any body found. Rii mini bluetooth keyboard connected with desire hd
Advance thanks
Click to expand...
Click to collapse
you look at http://ipadgeartalk.com/ipad/anker-...5-0-cellphones-computer-laptop-notebook-black
Hi and happy new year to all,
I've got a logitech bt mouse (the one that come with the keyboard - MX5500 revolution).
I've been trying to pair the arc (v.4.0.2.a.0.42) by this procedure:
- starting the bluetooth (phone)
- make the phone discoverable (phone)
- putting the mouse into pair mode (mouse)
- scanning bluetooth devices from the phone (phone)
- Pairing with mouse (code '0000')(phone)
and then in the screen appear the screenshot attached
so does anybody encounter this problem and how to solve?
does the arc support bluetooth mouses? which ones?
Use BlueInput. Android doesn't have native Bluetooth HID support.
Does not work, I've just installed the blueinput and cannot make it work as a mouse
Maybe you need to connect the receiver
Sent from my LT18i using Tapatalk
rkanwar said:
Maybe you need to connect the receiver
Sent from my LT18i using Tapatalk
Click to expand...
Click to collapse
It's connected...
Is it a bluetooth mouse or RF based wireless mouse?
I use the Bluetooth Keyboard EasyConnect to connect my microsoft bluetooth mouse 5000, this worked ok.
Maybe this thread will help you -
http://forum.xda-developers.com/showthread.php?t=1224676
good luck
@soumya_digi: of course it's a bluetooth mouse (i used to use it with my pc)
@vin31sp: didn't work for me, how u do it?
@eladkoren1: that post it's for USBOTG, and storage and so, right?
It also have modules for keyboard and mouse..
And you get also the otg support with it
Good luck !
pairing optical bluetooth mouse with xperia
phone detects the mouse ok and then ask to input pairing code
is a box for it
However no digital keyboard comes up
So where to do it??