Develop Bugs

Retina WiFi scanner (and WEP cracker)

http://www.eeye.com/html/resources/downloads/WiFi/
Aparently its the first PPC app to do WEP cracking.
I can't get this running properly on my Imate PDA2K, (WM2003SE), I think the problem is to do with zero config wireless in Windows Mobile 2003.
Maybe you guys will have better luck?

Won't run on my XDA IIs either (1.40 ROM, 1.12 Radio)
Says unable to load the driver, make sure wireless connection manager isn't running.

Installed it on my IIs and it worked fine first time!
Dont forget to switch on the wifi before launching the program

Codiac said:
Installed it on my IIs and it worked fine first time!
Click to expand...
Click to collapse
Can I ask what ROM versions' you using and are you still using the O2 Active software? Just wondered why mine doesn't then if yours does (and yes I turned it on first!)

Sorry... didnt want to appear to be teaching granny to suck eggs :lol:
Rom Version 1.31.00 WWE
Rom Data 12/13/04
Radio Version 1.06.00
Protocol Version 1337.38
ExtROM Version 1.31.139 WWE
Apart from the O2 rom upgrade, everything else is pretty much as it was when bought it (crap, slow, constantly crashing and useless BT!)
Cheers
J

Can somene host Retina Scanner for pocketpc? I tried to download it from the site but it will not accept my gmail email account.
Thanks!

The Software
The file wont upload?!?
Heres the email link sent to me, try this:
http://www.eEye.com/html/resources/downloads/download.asp?file=RetinaWiFiPoc&id=050422.121940.125950
:wink:

Codiac,
The link works but it wont install on my O2 XDA IIs says the cab file is not valid. Did you get it to install and on what unit?
Thanks!

This is the link I followed to download the program and it installed no problems on my O2 XDAIIs.
The only message I got was the usual designed to work on a previous version of windows.......
Its about 3mb in size, ill try and PM my copy to you

Works for me
It works great for me with a iMate JAM and Sandisk WiFi + 256MB. No problems at all.

Can someone please email me the file? It cannot be downloaded from the website at the moment.
Thanks.
rgloverii @ hotmail . Com

It works once the app starts but when enabling brute forces then closing the app, the unit looses connection with the AP requiring a reset.

How does the cracking work? Does it just try the passwords you put in the config? If so thats a bit lame.

wamatt said:
How does the cracking work? Does it just try the passwords you put in the config? If so thats a bit lame.
Click to expand...
Click to collapse
It would be a VERY LARGE download if it included dictionary . you'll need to find a brute force dict and copy them to the app's own dictionary.

i installed it and it seems my wireless manager can't be turned off once i run it so i had to do a soft reset

I have downloaded the software but was not able to upload it on the Forum server ???!!!!! :?: :?:
Don't know why & the files are not well sorted it seems nobody is managing it
so any info on how to upload it to the server will be appreciated....

its is junk, when done, the WiFi Connection is trashed and you have to softreset, not good, not sure its worth the issues just to try it...

It did not trash anything on my PPC.

i downloaded it....if anybody is having problems downloading it then you can get it here.....
if you do please check out my site and forums...i am trying to build them up a bit....lol...
rock...
hope this is some help!

oops
above is the PC version....i grabbed both 8)
here is the PPC version....
GET IT HERE...
lol :shock:

TomTom 5.1 and MDAIII

All,
I have a MDAIII flashed with the latest iMate ROM running TomTom 5.1. The problem I have is that while using TomTom 5.1 the application closes by itself and unloads from memory. This is really annoying can anyone tell me why this is happening? I am using a Holux 236 GPSlim Bluetooth.
Thanks
Msuk

Hiya,
The same problem here but with TomTom 5.0...
I flashed my MDA III with the latest iMATE ROM (1.40) and Radio 1.13...
...now TomTom closes itself, when I am trying to change map colours, when trying to zoom in or out on the map or after a minute or so when working with the BT GPS...
ANYONE???

Hi,
I reflashed my phone over the weekend using the iMate 1.40 ROM and then installed TomTom 5.0 upgraded to 5.1 and so far it is running ok - hmm odd.
Thanks
Msuk

maybe be poi
Try disabling POI and see if that helps

Does the patch to 5.1 resolve the lack of on-screen keyboard missing?
I have to resort to using the slide down hardware keyboard and have difficulty getting numbers for postcode input!
Anyone got a solution?
JC

Hi there guys, for all the problems here on tomtom you will find if searched on the forums all your answers, but as for the on-screen keyboard yes 5.1 resolves this, so go ahead and update it!
as for the crashing it is the poi that is doing this, make sure you have installed a good version of TT5 and there is a patch for the poi problem on this forum and on the ftp site. if you search for the poi patch you will definatly find it.
I have TT5 and my MDA III and it works perfectly (touch wood) with my leadtek bluetoth gps reciever on WM 2003, i could'nt for the life of me get it working on WM2005 so i had to downgrade, maybe il upgrade again when it is a bit more stable.
So all you guys, search and destroy the problem!!
Ash

Gyus! every body that have problem with the new ROM (1.40) & TT5 I strongly advise to replace the poi.dat file in teh maps directory to this one: ftp://ftp.xda-developers.com/Uploads/Blueangel/TomTom5/poi.dat
It worked for me... no more crashes... :lol:

Spanish POI..?
He3eK said:
Gyus! every body that have problem with the new ROM (1.40) & TT5 I strongly advise to replace the poi.dat file in teh maps directory to this one: ftp://ftp.xda-developers.com/Uploads/Blueangel/TomTom5/poi.dat
It worked for me... no more crashes... :lol:
Click to expand...
Click to collapse
I just did this and now I have what appears to me Spanish POI on my Tomtom..? Or did I just do it wrong..?
Like a fool, I didn't copy my existing POI and I just overwrote it!
Lesson learnt here folks is to make sure you can get back to where you were!! :lol:
Oh well, I'll fix it tonight when I get home!

POI.DAT ITA !!!
HI GUYS....
HELP ME PLEASE !!!
i have a problem with my qtek 9090 (rom v. 1.40.04 ITA; ext rom v. 1.40.153 ITA; radio rom 1.12.00) and tomtom 5.10. I have installed first tomtom 5.00 and then the upgradeto 5.10. I have installed ITALY PLUS MAP (309mb). In some place the tomtom software disconnect the gps connection and unload itself from memory. I have disabled PDI (POI) and now tomtom in that place doesn't unload itself from memory. But if i want POI function ??? Could I use the POI.DAT file linked in this forum ?? That file is good for my italian
version ??? If not where can I dowload the file POI.DAT for my italian version ???
Thank you so much !!!!

That link for the POI patch doesn't work??

Jupiter
...mate, the file is still there.... try different approach, go to the FTP manualy, then go to Uploads/Blueangel/TomTom5/, & download the POI.DAT file. (I'll try to attach it to this message anyway...)
r_grieco
From what I understood the poi patched file uses existing points of interest of your mashine, but if you'll try to search for some poi you won't be able to find it...
Any how, try it, it might help. Gust make a backup copy of the original POI.DAT file.
Everybody
I've upgraded to 5.10 & all the issues are gone, I have onscreen keyboard + the built in keyboard works absolutely fine & the original POI file works with no problems whatsoever.
P.S.
I use Great Britan maps...

I tried to do the upgrade to 5.10 and it just went on & on forever, I had to do a ctrl+alt+del to stop it!
I'm guessing I may have installed TT5 incorrectly in the first instance despite this, it works fine but no on screen keyboard and Brands Hatch doesn't exist!!!
JC

datasafe
If you want PM me I'll sed you *.CAB files of the upgrade.
I haven't used the PC wizzard to upgrade my TT5 to 5.10, so I don't know if there are any issues with it... ...or I just have a special version... :twisted:

htp
i have tried to get to the ftp site but it never works
Sure there must be a key to this
I tried to download the file but it locked me out and i had to reinstall tomtom 5
if anyone has got 5.1 or knows why i cant get it from ftp would welcome as this keyboard **** is driving me mad
clive

sorted
Sorted, need the 5.1 with patch got it!
I dont know how to post it so if you want to inform i will post it, if not email me
clive

To enyone looking for the "PROPER" upgrade to TomTom 5.10, I have uploaded it to: http://www.megaupload.com/?d=5THJ0DO4
Have Fun :twisted:

HTC P3600 Trinity, DUN Profile, WM6?

Can anyone verify if WM6 on the Trinity brings back the Bluetooth DUN profile?
I'm 95% happy with the Dopod WM5 ROM on my P3600, the only thing missing is that I can't get traffic updates to my tomtom 910.

Hi, I am using mun's 2SE rom and I can now get traffic updates on my tomtom 910.
I did not have to do anything special on the SE version, it just worked.
WM5 etc would not see anything other than the BTHF profile.
all workign now
BMF

Very VERY good news, off to go download WM6 now

I just downloaded and installed mun's 2SE (flawless install). Wow is my phone better
Anyway, it does enable TomTom 910's traffic updating. I had to "delete" my phone from the TomTom 910 and then reconnect to it.
Simple.

Is there any possibility this Bluetooth patch can be worked into the WM6 releases for the Hermes??
I have exactly the same problem (no DUN profile), but on the Hermes.

DOH!
just upgraded to muns TE version of 6 and tomtom 910 does not see bluetooth DUN
the SE version worked sweet with TT910.
BMF

badmelonfarmer said:
just upgraded to muns TE version of 6 and tomtom 910 does not see bluetooth DUN
the SE version worked sweet with TT910.
BMF
Click to expand...
Click to collapse
I found solution) here it is http://forum.xda-developers.com/showpost.php?p=1281328&postcount=882

My Tom Tom GO 700 reports this error during the configuration.
"This phone does not report Wireless data connection (DUN) cabalities."
I have loaded mentioned CAB's.(SP1 and BT_DUN) Is ther a hope on getting this going?
thanks Peter

After adding new cabs, delete phone from TomTom, delete TomTom relationship from phone. Resync.

done what you hav sudgested, but no good. Still the Error about phone does not report wireless data connection (DUN).
I gues will have to go back to previous release.

psimek said:
done what you hav sudgested, but no good. Still the Error about phone does not report wireless data connection (DUN).
I gues will have to go back to previous release.
Click to expand...
Click to collapse
try to add this reg entries and files... sorry don't have time to make a cab

Thanks MuM,
Phone is recognized, but cannot connect to cingular.
I will try to play with more settings before I go back.
Peter

Where to Install MODEMLINK?
Where should the contents of MODEMLINK be install? Windows dir?
Thanks

mun_rus said:
try to add this reg entries and files... sorry don't have time to make a cab
Click to expand...
Click to collapse
Please kindly advise where I should put those reg entries & files? TKS & RGDS!

dan.gior said:
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Click to expand...
Click to collapse
to connect over usb you need usb rdiver HTC for pc...
here:

to connect over usb you need usb rdiver HTC for pc...
here:

So I'm a bit confused, does that mean we can use a data connection on the Hermes via Bluetooth for the TomTom 910?

I recommend you this thread, that's the way I got tomtom go data connection and plus services working with my wm 6-updated wizard:
http://forum.xda-developers.com/showthread.php?t=314371&page=3#21
dartrax

ervius said:
to connect over usb you need usb rdiver HTC for pc...
here:
Click to expand...
Click to collapse
Thanks worked painlessly on my O2 Orbit (Artemis/3300).
What a great site - I've learnt loads already and lookforward to overclocking next!
Neil

connected my new smartphone shadows with tom tom go 700
After 5 days of struggle, I finally was able to connect my wireless data (DuN) with my tom tom go 700.
What i did is as follows:
extract the attachment and do the following:
1. Unlocked my phone app for tmobile
2. installed WM6_btdun
soft reset
3. copied all files of SPDUNHACK including registary one to the windows folder(\windows)
4. Installed the installed ATCUI, showed me a serial (COM:1) port
softreset
and connected my tom tom...
But as the experts mentioned earlier, while your tom tom is connected, you are not able to surf the net but able to do all other things. It says voice call active.
Good luck!

WM6 compatible wif bbconnect

Hello there guys.
I got some version of Windows Mobile 5 on my phone working with BB Connect but was wondering if any1 released WM6 working wif BB Connect yet ???
Apologise now if this has been asked b4 but cudnt find anything.

kame1986 said:
Hello there guys.
I got some version of Windows Mobile 5 on my phone working with BB Connect but was wondering if any1 released WM6 working wif BB Connect yet ???
Apologise now if this has been asked b4 but cudnt find anything.
Click to expand...
Click to collapse
Try searching with a google advanced search - limiting your results to http://forum.xda-developers.com
Try say "BBconnect Trinity" or "Blackberry Trinity".
It's there I promise.

If its there plz point me in the rite direction. wud appreciated muchly !
will also search though.

For KAME1986
Hello,
I have just finish to upload the .cab on rapidshare.
http://rapidshare.com/files/50855639/bbconnect_wm6_pro_4.0.0.90.cab.html
Enjoy.
Private69.
@++++

could you upload not in Rapid pls..
thx

Finally i have a steady WM6 version with works with BBConnect !!
Thx

try this...working on my trin
try the steps here to get bbconnect working.
http://www.sems.org/entry.asp?ENTRY_ID=276
Graytraveler, try .84, 90 did not work for me with a stock Tytn II, but 84 did. Or I used Dutty's latest ROM from Xda-developers.com and .92 worked fine with that.
Hchickers, you can try this:
1. Hard reset.
2. Change device ID, from Start -> Settings -> System -> About -> Device ID to HTC_P3450
3. Install a registry editor, such as Resco (www.resco-net.com) or Total Commander (www.ghisler.com, I use 2.5 beta 3). Then edit
HKLM\System\Versions\AKU key, change whatever in there (like .0.0.3) to .0.4.2
Then soft reset and install Blackberry Connect. This method worked for some people (they weren't using 750, but still). It might work for you as well.
Click to expand...
Click to collapse
even if this isn't any help for people getting started with BBC on there trins, all new BBC updates get posted there.
p.s. If u dont have bb service from your network before!!, then bbc will never work.

TOSHIBA g810 - Wm6.5 5.2.21234 wwe from portegeclub!

Good news!!
Toshiba g810
link:
http://www.portegeclub.com/forum/viewtopic.php?t=2097
test please!!!!!!

Flashing done!
VERY VERY GOOD!
Full Toshiba G810 rom original!!!!
Works great, all function like 6.1 but more!
I'm testing now.....
I write other comment when possible.
Bye.

Anyone else tried it yet?
Anyone else tried this WM6.5 ROM on the Toshiba G810 yet?
Do you have the detail instructions how to upgrade using this ROM? (Am abit concern might brick my TG810.)
Thanks.

I found 2 problem on this rom:
1 SMS not work, not receive no send.......
2 Sound of event (sms, mms, beep error etc....) no work properly...
Other function work fine (wifi, gps .....)
Pocket Explorer works fine, very good e pretty!
bye....

Fixed ROM 6.5 for G810
Dear people, here is the link for windows mobile 6.5 ROM for toshiba portege g810 (Official possible). Or you may check back at portegeclub.
Link 1 (Fixed SMS/MMS problem).
http://www.mediafire.com/download.php?znn1imz21g2
or
http://www.mediafire.com/download.php?eiewrm3wyjo
______________________________________________
How to update:
Note. The ROM update utility requires Active sync 4.5 from microsoft. Please update ROM from windows XP (any, x64 or x86), update failed from my Windows 7 (x64), however I had to hard reset my device to perform Rom upodate. I updated my ROM for my Portege 810 (UK) successfully to Windows mobile 6.5, and this one is complete with english language. It updates like official ROM update utility package. Tested it and and worked fine, no problems at all.
Update instructions can be found here:
http://www.toshiba.co.jp/product/etsg/cmt/english/asian/dl/Update Instruction.pdf
Hope you do this quickly, as this this had been much awaited.

Hi
Tried to update, everything goes right until first reboot, then Vista is asking for drivers and installing them...
In the meantime, the update utility reports that the connexion has failed.
From there, black screen, cannot finish the update, the device is not recognized anymore by the PC and I cannot find any way to force recovery.
Any clue?

I have the same trouble

Is there a way as for the Touch cruise to put the phone in recovery mode (camera button + reset for the polaris) or something like that?

G810 Wm6.5
Been working fantastic for 5 day, Windows Mobile 6.5 is a vast improvement, switched off for a flight and urned phone back on the Touchscreen is not working, works to allow Hard Reset but not to use functions in Windows Mobile, anyone had similar problem or solution ??

geo.adams said:
Hi
Tried to update, everything goes right until first reboot, then Vista is asking for drivers and installing them...
In the meantime, the update utility reports that the connexion has failed.
From there, black screen, cannot finish the update, the device is not recognized anymore by the PC and I cannot find any way to force recovery.
Any clue?
Click to expand...
Click to collapse
Look like similar problem with me.. My Toshiba Protege G810 die (Brick) after following this risky steps.. Contact Toshiba Service Centre here in Malaysia, they said due to that problem, I need totally change the Motherboard which is cost same as new unit.
Conclusion, is there any solution to UNBrick and give 2nd life for the Toshiba Protege G810 ? If not probably I gonna throw it into the Trash Bin..