Hi All,
Does anyone tryed to use a Dual-SIM adapter (I tried with cut-version) on Artemis with WM6 B&B4.1 ???
I tryed yesterday evening, and it recognize the SIM, but when I go to the menu in order to change the sim... I press Select and nothing happens...
...then I tryed to use another phone just to see if the problem was the phone or the Dual-SIM, and I took my older Nokia 3210...
With my great surprise, It worked perfectly, so the SIM works.
Do you know for sure if it is a problem of the B&B4.1 (if yes, i will try to downgrade to 3.7) or of WM6? Is there exist a kind of patch to correct this error?
Many Thanks,
Claudio
I suppose you are using a digital dual sim adapter. I have an analog adapter because it uses less power. It did work but not correctly until I had B&B 4.1, the reason for that is the WM6 core version. From 5.2.1620 and upwards my adapter works.
I had the problem that when I used Battery status or SPB Mobile shell that it didn't show that I changed the card. It did change but it wouldn't show the change.
Related
I was trying to upgrade the radio on Universal, somthing I did all the time on my magician. And I think the upgrade worked, I'm not sure. BUt now it won't get out of boot loader mode. If I hard resest and choe clear it says "clearing now" then just goes back to loader mode. I've tried every key combo I know. Power + reset, backlight + power + reset, pulling the battery. Nothing works! Anyone had this issue before? Any suggestions? :?: :?: :?: :?: :?: :?: :!:
That happend to me too. I tryed every thing ... not working ... then i upgrade to the last radio and (soft-reset and power botton) and it worked ... i havent make any upgrade after :lol:
Hi,
the same happened to me, but I solved the problem:
1.) Make the update without any card (SD + SIM) in the phone!
2.) Use the original USB-cable
Now it should work!
Greetings,
Teja
Thanks guys. Pulling out the SIM and the SD did work. I wonder why though? ANyway, thanks again.
A million thanks!!!
I read a lot of replies on other threads, and nothing worked.
Then your suggestion of the Sim + SD worked like a charm.
Thanks a bunch for restoring my expensive brick.
It took a long time for me to find out you've to remove the cards so I was about 2 weeks without my expensive MDA-Pro. And I'm looking forward if it helps anyone to solve the same problem!
Greetings,
Teja
As you've seen, it was my first post here...
Stuck at USB V1.01
New to this. I have a QTEK 9000 Spanish edition. Was upgrading the ROM and the PC for some reason restarted cutting the connection while ROM was in progress. now the PDA is stuck in USB V1.01 screen, tried to hard reset. nothing working. I have read posts about removing SIM and SD cards I have done this. I can not even connect back to the PC, I use the original USB cable, windows pings to suggest a connection is made BUT, now light shows uup on PDA to suggest a connection and Windows mobikle Device Center is not picking up the device. can anyone help me?
Hi, the same problem with me. So at last I am successful and I solve it. I suggest you. First you make update with out any card and then the second step you use the original USB cable.
Try the best.
Bootloader screen stuck!
I dun know i removed cards and hard reset but still its not connecting... show usb when connected to pc and Serial of not down at the bottom show v1.01
Any idea what should i do now?
Hi
Does anyone know how to setup IGuidance to work with WM5? I dont know how to work the BT ports at all. In 2003se, i could use the "scan" for bt data and it'd find the itrek gps unit but now it results in "no gps found". alternatively, what other gps software will work other than tomtom? I dont have tomtom =(
I've got version 2.1 and it seems to work with WM5. I add the gps to the bluetooth and then I create an incoming and outgoing port. I set my gps to port 6. In IGuidance it won't detect the gps but if you manually choose port 6 it will work just fine.
Andy
iGuidance 2.1.3 locks up my Wizard after several minutes. Grrr...
I am having all sorts of trouble with my PDA2K (WM5) and iGuidance. Although I think it has more to do with my bluetooth than anything. When I first started trying to get it to work it gave me coordinates that I was in Africa... Anyway, I think I am going to go back to 2003SE.
I'm having a different problem with iGuidance v2.1.3 on WM5. It installs and runs just fine. I use BT over COM6 and it seems fine. The problem I have is that the coordinates are off. The strange thing is that when I run GPSInfo (a separate app) it shows the correct coordinates - iGudiance thinks they are different and thinks I'm in a different location ( a few miles away).
I gave up on it and decided to go back to 2003SE (iGuidace v2.1 that worked perfectly fine on that configuration a long time ago). I followed teh steps to format/clean hive and did the down grade but am having a different problem. I've seen other people running into similar issues but I've not been able to get around it
"BTTrayCE - bluetooth can no longer be used because the license has expired" - I have tried a number of things using different BT stacks, 2003SE builds, reset (soft+hard) etc. Same problem!!! Argh - I'm stuck. I really miss my GPS!
Hi krille,
I also had similar problems with my SX66 and iGuidance and finally decided to go back to win 2003 because it worked fine with it. In WM5 my BT GPS receiver was never able to make a connection with iGuidance. But now I am having a different problem. I cannot downgrade even though I followed all the instructions correctly posted on the BA_Downgrade page. The upgrade program ( MaUpgradeUt_noID.exe ) does not seem to identify the rom versions and though it gives me a successfully upgraded message nothing had happened. I cannot downgrade now and stuck with WM5. Did any of you experience this when downgrading and can offer me any help.
DEK.
I've been upgrading/downgrading with differnt ROMs without any problems
Make sure to disable activesync on the pc and copy the nbf files as described in http://wiki.xda-developers.com/index.php?pagename=BA_Downgrade_WM5. Sometimes the verion info update to/from doesn't show between WM5/2003SE...
What happens when you click Update to continue?
BaUpgradeUt.exe worked
Thanks for your reply. I followed all the steps as described in the link you have sent but MaUpgradeUt_noID.exe did not upgrade (downgrade to 2003SE) though I got a message saying it did. Then I tried the file BaUpgradeUt.exe in PH20B folder and it did work. My device data file says my SX66 is in fact PH20B1 though. I do not know why MaUpgradeUt_noID.exe cannot update my ROM. Anyway I am happy now with my WM2003SE and iGuidance and BT all work faster with ROM update to 1.40. Now I am planing to customize my ExtROM to have all my personal settings and programs so that I want feel bad not having WM2005. Thanks for your willingness to help.
DEK.
Hi there!
What key combination gets me into the bootloader?
I've been wondering and searching for a way to upgrade my MDA pro rom. (searching for hours on xda, google and a lot of other specialized sites. Turned out to be dead ends! FRUSTRATING!
I'va had a Qtek S100 before. There was a way to get into the bootloader. And there is a way into the bootloader for the Universal to! YES!
But when i try to push the buttons
on/of
Camera
reset button
i cant get in!
button 1 and 2
reset
the same problem.
I get as far as the pres 0 or X for factory default and exit.
Who can help me? I have the no_id upgrade utility and the ROM ready.
Was there a UUL file which i had to edit before using this upgrade method?
I hope there wil be a good tutorial for this just like the one i have used to upgrade my S100 to an orange rom. (worked great!)
Can anyone help me please
Its BACKLIGHT BUTTON + POWER BUTTON + RESET HOLE
It's better to do this without the SIM and Memory Card connected. Disconnect also the USB Sync Cable.
After entering bootloader, you will see SERIAL written on the screen but the screen has no backlight so you have to look hard.
Then when you plug the Sync Cable, the SERIAL will change to USB then you can run the NoID to update.
Remember the NoID has to be run twice in a row as the first time usually solicits an ID Country error
It Works
Thanks Jorge!
Just those keystrokes helped me a lot. It works just fine and it took me only one run to Initiate the upgrading.
Thanks a lot!
I followed your advice and removed the SD and the phone card.
Yes! now i can experiment with these ROMS.
First Jasjar, later O2 and hoping for the best roms with the best programs.(hoping to find a messenger cab file in the jasjar rom)
As I am planning to do the same, Try all the variants of the ROM's, could you inform me what are the good and bad points of all the different ROM's you used and which did you decide to use finally.
Thanks
HELP !!!!
I turn on my Qtek 9000 and i see SERIAL written and the screen but the screen has no backlight.
How can I boot my Qtek 9000 again without this SERIAL mode ????
Best Regards
Hi Ecraseur,
if You did not do anything else (no upgrading), try ColdReset : Power-switch + Reset hole.
Ruud
If we can boot from Serial/USB is it possible to boot from Mini SD? I'm toying with the idea that by using a Linux Live Disk content on a Mini SD it may be possible to boot into a virtual Linux environment? I know it's going to be uber slow and may not even work but I thought it may be worth a look?
If a Mini SD boot isn't possible do you think it'd work to have one of the smaller USB bootable Linux flavours as the USB boot for the HTC Wizard etc?
Hi everybody,
i´m an spanish guy who owns a BlueAngel (exactly a TMobile MDA) thas was functioning properly, without problems.
Yesterday, after releasing the PDA from its cradle, I started to have this error message: "UNKNOWN CARD IN SOCKET 1 - Enter the name of the device driver for this card. For information, see the card manufacturer´s documentation"
And the message appears even if there´s a SD card inserted or not... and I´VE NOT WIFI. You can try so much times and nothing happens... the icon shows no wifi, and no dialog box appears, as it was usual.
It seems the PDA don´t recognize the wifi module... as if it was turned off...
I´ve updated to the latest ROM, latest radio etc... (i´ve not tried with WM2005 yet) and this happens again and again...
And in the spanish SAT they have not idea of why this is happening!!!! :shock: :?
Please help me... i´m getting desperated...
Thanks so much in advance!!!!
Un saludo
Hi all,
I need to know if someone can help me to bring to life again my lovely JasJam,that was working great until this morning.
The problem is this one:
I was going outside the country this morning (I am in Czech rep. now and I went to Slovakia) and on the way back I realize that my hermes (herm100,spl2.10 olipro,RADIO 1.57,schaps 3.54bITA) was without any signal. I tried an other SIM card and the result was the same.
Once at home, I tried to reinstall schaps,everything was ok,except the signal still missing.At this point,I tried to reinstall the Radio and the bar was still at 0% and after 3 minutes it gave me error 262 and now is with the screen always on (illuminated) on the KITL page and it doesn't start anymore...
please,someone with a good heart,help me.
http://forum.xda-developers.com/showthread.php?t=286755
back a live any hermes ( that's as worked whith my hems)
I don't know that's work but try install any official rom from HTC that's have radio information and then you can install any other. but extrat the signedruu. (that's the rom file) and then put the file into a sd card start your herm by pressing simultaneous the power, and ok button and prissing the reset hole whith the stylus pen and follow the steps it's very easy.
thank you Zefo,
but I am Stuck on the bootloader page, I cannot insert a original Rom because ActiveSync doesn't recognize the phone.
Being in the Bootloader page is fine. Just run the RUU Wrapper, it will connect.
What caused the problem? I am a little worried as I am going to Tenerife on Friday and I am running Radio 1.54.07.00 as well (I assume thats what you meant when you said 1.57)...
Is there any reports of going abroad messing up your phone when its been modified with new radio/rom?
Hi Allan,
I would like to run RUU,but ActiveSync doesn't connect my phone,so when I launch it,they don't communicate. The computer see the device,but ActiveSync not, infact, If I try it,Itgive me error 260 Update Error (I used Hard SPL v7)
Stick what you need to flash on a MicroSD card and stick it in the phone, you should be able to boot off of that.
Theres instructions somewhere in the forum on it all.
I got the axact parameters of yours Hermes, STARFURY, it changes only the rom (mine is/was schaps 3.54b).
I am not able to find what you suggest me but I cannot go on the SD if the phone doesn't turn on the OS...How can I do?
Get a usb cardreader plug your microsd card into an sd card adaptor, then plug that into the cardreader and the cardreader into hte PC. Transfer the stuff onto the microsd card and stick it in the phone,.
but I have just to put the 2 files RUU Wrapper (Bootloader) on it in the main root??and how can I make them start?
I was able to go into the OS but I am still with no GSM and if I try to update it,it stops at 12% also with original ROM.
Can anyone give me a link where can I see where the radio chip is located on the mainboard please?