Develop Bugs

BIS dissappears

I have wince 2003 a05 installed in my x50v. I can't see any BIS, although it say s 128M ROM in the system information. Someone said this can be solved by changing the language. But I can't find any wince 2003 ROM (nb0 files) available online. Can anyone tell me how to solve my problem and upload required ROMs? Thanks!

teaonly said:
I have wince 2003 a05 installed in my x50v. I can't see any BIS, although it say s 128M ROM in the system information. Someone said this can be solved by changing the language. But I can't find any wince 2003 ROM (nb0 files) available online. Can anyone tell me how to solve my problem and upload required ROMs? Thanks!
Click to expand...
Click to collapse
you HAVE seen this thread, have you not ??
http://forum.xda-developers.com/showthread.php?t=322498
why bother with 2003 ( not even 2003SE ) - when you can have WM6 ??
~~~
If you don't like it ... all I can find is 2003SE here:
http://www.efsoft.it/romforpdappc.htm
~~~~~

Thanks! Nice website, man!
To be honest, I have tried two ways two upgrade my x50v from 2k3 A05 to WM5 which is a pre-requirement for WM60:
1) use Dell's upgrade program (failed at the last step, formatting rom 30%)
2) use SD image loader with WM50 A01 Eng ROM files (failed at "erasing storage 30%)
I was just wondering if there is any hardware problem of my ROM. Maybe that's why I can't see the ROM in 2k3 A05 system.
I also tried using language change (Japanese <-> English). But it didn't work. I still can't see ROM in my system.
I even tried writing WM60 ROM directly, but also failed at "erasing storage".
Is there any software that can diagnose the ROM?
Thanks again!

who knows from all the playing around you have done that you "muddy" up your device and causes conflicts ...etc ???
I would suggest:
hard reset your device ---That should revert it back to factory settings.
and now you can start FRESH upgrade/downgrade ...etc !!!
If you decided to experiment with the link I gave ...
http://forum.xda-developers.com/showthread.php?t=322498
make sure you read throughly the "required" part of the post before proceeding !!!
""
Attention!
If you have Windows Mobile 2003SE ROM on your device, FIRST, please download THIS ARCHIVE (RAR 32.4 MB) (Mirror),
/ and update your PDA to A01 Windows Mobile 5 ROM.
/ After that, go to Dell site, download official WM5 A02 ROM and update your PDA to WM5 A02 ROM.""

It's a used x50v. I got it a couple weeks ago.
As I mentioned, I can't upgrade to WM5. Leave WM6 alone. Thank you though.

windows mobile 5 on imate pda2k / qtek 9090

how can i do this?i tried to download a lot of files from this website but they didn't work....
can you help me? i'm italian.
can you make me a simple guide to change the rom in my phone?
thanks a lot

yes plz...same problem here
any one

You have to read and understand English. This should be enough to upgrade even to WM6.1. Start using Wiki.
PS: downloading files without understanding what are they for is the best way not to do anything or to destroy your device.

what i mean to say is that i want to upgrade my imate pda2k windows from 4 to 5..
for that the file named Version 5.1.1700 Build 14343 - Patched by Mamaich V3
on this link is not downloadable..
http://wiki.xda-developers.com/index.php?pagename=BA_5.1.1700_build_14343_Upgrade
can someone help me to get this file plz....
thank u

downgrading o2 stealth to wm5

hey guys and girls,
ive upgraded to wm6.1 and i would like to go back to wm5 as i have no activesync. ive tried all the different ways to get it working including the fix from yuc's thread with no luck.
where can i find the rom to put on my SD card and downgrade from there? also if someone can give me the step by step way to do it aswell.
thanks in advance
rick

is there another way to update a rom other than via activesync?! the official rom from o2 is run from the computer. HELP please!

downgrade xda stealth to wm5
i've same problem with you before, and i try to fix activesync with yuc file and i lucky, my stealth stay connect to pc until downgrading finish....and now i still use wm5 official from o2...keep trying bro....

please help me!
hello, where find it official room wm5 for my stealth? thanks a lot (sorry for mi bad inglish)

Downgrading Stealth to WM5 (SDcard Method)
Read My Thread
http://forum.xda-developers.com/showthread.php?t=556192

IPAQ 914c

Please, can any one help me with a rom for my Ipaq 914?
I used the Windows Vista to update my phone and now is dead...
Where can i find a custom rom or a flash.dio for this model.
Please help me, i need my phone to work...
Thanks in advance

Zyrus said:
Please, can any one help me with a rom for my Ipaq 914?
I used the Windows Vista to update my phone and now is dead...
Where can i find a custom rom or a flash.dio for this model.
Please help me, i need my phone to work...
Thanks in advance
Click to expand...
Click to collapse
download the rom from HP support site, and re-flash it on a non-vista computer --- should work.

How can I update the ROM of Ipag 914c to change the language.
My original language of my phone is French so I want change it into English(international).
thanks in advance

Same question. Change language. This is not possible by Hp update NL->WWE.
I've extracted flash.nbf file from setup then cut the first 3431 bytes then copied to sd card as flash.dio.
.
What keys i should hold for sdloader mode volup-ok-reset didn't work for me. Only when i press side wheel with ok then i was get is Dowloading Qualcomm Image at top of screen then nothing happen...
please give some advice what can i do to change language.

http://forum.xda-developers.com/showthread.php?p=3055586

anyone know how to use mtty with ipag 914
thanks

I upgraded my Ipaq 914c with original ROM from HP and i have same results. DEAD.

I do the same mistake...
problem is windows Vista. So, please charge you phone to min 40% and try to update with original ROM from HP site but on Windows XP.
Flash is passed and you phone has been alive....

Hi all
Hey i m having a big qty of hp ipaq 914c with me can anyone help me to change the spanish rom to english.pls reply as soon as possible bcoz i tried everything posted before on this forum but never succeed so pls pls pls help me.
and one more thing i had the same problem in hp rw6815 so one of our forum member gave me an RUU patched which really worked an it was very easy an effective so if anyone can provide sthe same kind of RUU patched for the ipaq 914c i be really very greatful to him
Regards,
Moiz.

rom language
specify language when downloading new rom from hp site... then your rom will be in that language

Bricked Ipaq 914C
Hy,
I've bricked my 914C during an upgrade (for up. in italian sp43440.exe) i've forgotten my sd card inside and now the device became a brick!
When i turn on the 914 the writing "RUU...." appears and remains stuck on this screen. When I want to turn off the phone i must to remove the battery.
I tried to follow the following guide http://forum.xda-developers.com/showthread.php?t=511548 but i don't have XP, only Vista, which doesn't work with the information reported.
Please help me!

hx2750 not upgradeing

Hello,
I have a hp IPAQ hx2750 and I am trying to upgrade to WM5 on it, all of the roms that I have found do not work.
after re-flashing the boot loader sicks with the progress bar to full.
other info I tried wm6.5 first did that screw it up?
Thanks

I have tried
I have tried
HP iPaq HX2000 Series - Windows Mobile 5.0 Upgrade AND Downgrade - includes ActiveSync 4.0
advanced pack -> Wm5.0 for hx2750_1.00.00.L_ENG
the rom in the folder is E1_Magneto_ROM_v1_00_00_H_SIGNED
the 2790 wm5.0 rom from HP SP33752
rs330.rapidshare.com/files/95298896/WWE-hx2000L_WM5_Upgrade.rar
does anyone have the hx27xx upgrade cd around?

WM6.0 is not working.......
WM6 roms I have tried
WM6_WWE.nbf 5,20.00.H
spiaatie_WM_6_5.nbf
rapidshare.com/files/53282580/WM06.rar
this is really annoying.......

please help
please help me upgrade this device
Thanks

You need to read the first three posts in this thread
http://forum.xda-developers.com/showthread.php?t=519296
If you follow the instructions carefully, you should be able to ugrade your device. Post any other questions you have in that thread. The people on that thread can help you with any problems you might have.
Rowley.

Ok I will
Thanks