When I use the "service of remote terminal" in my P3600 and I write the IP address of the remote Pc followed by ":" and the port number of the remote router (I've changed the predefined 3389 in my router configuration) I get an error message: "the specifyed name server is not valid". This is strange, because the SAME string used on PC desktop allows the connection. I thought it could probably be because of the port number: if I use only the IP address I don't have any message, but I can't connect to the remote PC because I didn't specify the port number... How can I force the program to use the new port and not the predefined one?
Gooer Remote Desktop Service
You can have a try on Gooer Remote Desktop Service. I am using it and it works fine.
Related
How do i get remote desktop working with VIsta?
Go into system settings, click the remote tag and allow remote desktop connections to this computer. Your local admin account will automatically have access, but you can add other user account to the RDC when you enable it. You may then need to go into your router and forward port 3389 to the ip address of your pc you're remoting into.
Doin this on the dash? I setup RDC for my TP2, let me know if it works. The dash was my phone until I got the TP2.
It ask me to enter the name of the remote computer and a user name.
Have just recvd my new Desire - very pleased with it so far (after upgrading from a TyTnII).
Having some problems connecting to our Citrix essential server (which uses the ICA client).
I've downloaded the Citrix app.
But cannot get this to connect to our server.
On my old phone I would just browse to our portal, logon, then download and install the ICA client for WinMo and then I'd be in.
Should I be using the Citrix app or should I be looking for a client to install?
Help pls! (I have utfse and found nothing).
The client from your webapp login is probably not for android.
might need to use the citrix connector in market place
thx for the suggestion.
i've already tried the citrix app from the marketplace
i just get an error no matter how I try to set up the various parameters (we use username/password/safeword-keygen to authenticate).
I have tried to use this "app" to connect to the "test" citrixcloud
and it works fine
So I guess this must be something to do with our Citrix server setup?
But any help would be appreciated!
Hoping i haven't bought a phone I can't use with our work system.
The touch HD2 user the other side of the office is winding me up
further to the above...
I have the Citrix app configured like this...
address = our.citrixserver.com
username = myusername
domain = ourdomain
Description = OurCitrix
Use Citrix Gateway = YES (If I don't check this box I don't get option to choose passnumber/RSA authentication)
Gateway type = Standard (I've also tried advanced & enterprise to no avail)
Gateway authentication = RSA secureID only
I click the acct to logon, it prompts for user/pass/key which I enter
I get error...
"The citrix access gateway you are connecting to is not configured for this device"
?
I expect the Desire is announcing itself as and Android device.
The Citric Connector for Andriod wil not work with standard Citrix WebInterface.
You need to create a "XenApp Service Site". (PNAgent)
Then it works perfect. (Even better then standard Citrix Client)
Right...
We've configured the xenapp pnagent site.
This is working well "inside the business" as i've downloaded the citrix program that allows me to dump citrix application icons on my desktop (no more logging in via the web interface).
If i use a webbrowser from outside the business I can browse to
h t t p s :// ourserver/citrix/PNagent/config.xml
So the pnagent site has been properly published through IIS.
Yet still get the error "the citrix access gateway you are connecting to is not configured for this device"
Or if I change the authent method i get "invalid credentials" (but of course i've entered them correctly).
Any ideas how to debug? even our support company seem to be stumped.
any update on this? i have the PNagent website all set up on mine, and i use citrix secure gateway 3.0 to access it from from outside. everything is set up correctly on the citrix side i believe, because i can connect and open apps from a pc using the PNAgent, and with the iphone citrix receiver (from outside my network).
with the android receiver, i can connect, log in and see my apps, but when i try to actually launch an app it says "the citrix access gateway you are connecting to is not configured for this device."
I can't even get to my desktop grrr
I just bought a program called Remote Desktop Client (by Xtralogic) and installed it.
However, when I tried to connect to my work, I get a notification 'Socket Is Not Connected'. I called the helpdesk of my work and they say it is not possible to have the server running on my mobile device......
The address I m trying to connect to is 172.20.20.20 with domain 'flexinet.local'. I used the correct username and password.
Maybe you guys can help me on my way?
First...I wouldn't go sticking those IP details up for the world to see. I'm sure it's safe enough but still. Next, have you checked not only the IP but the ports are correct? Then you should ensure that those ports are forwarded from the external domain you're connecting to.
Another thing you may want to check is if this app needs the prefix, i.e. http://YourDomain.com etc.
Lastly...are you attempting to connect from outside the network? Are you connected to the network via WiFi or are you attempting to connect via 3G from a remote location?
172.20.20.20 is a private address... 10.x.x.x, 192.x.x.x and 172.16.x.x to 172.30.x.x are private ranges and not valid on the internet - you'd need the external ip address or the fully qualified domain name (FQDN)... RDP uses port 3389 (if it's not been changed on the server) so your firewall will also need to be open and the transport you use to connect will also need to allow 3389 (WIFI / 3G)...
That is assuming you're trying to get to your server from outside your local network...
Did you try connecting to your work vpn (if you have one) so you can get inside your work network, then use the rdp client to connect to your machine?
Sent from my HTC Desire using XDA App
Hi guys, i have a problem! When i try to connect at my PC, it say that:
CANNOT CONNECT. LIKELY REASONS ARE:
1. The remote computer is not set up for this.
2. Reached the maximum number of connections.
3. A network error occured while connecting.
I insert ip name and password. Help ME!
How are you trying to connect? Remote Desktop or VNC?
Are you connected on the network via WiFi?
Is the appropriate port open from your router?
Try to turn off the firewall on your PC or open the appropriate port.
stathis95194 said:
How are you trying to connect? Remote Desktop or VNC?
Are you connected on the network via WiFi?
Is the appropriate port open from your router?
Try to turn off the firewall on your PC or open the appropriate port.
Click to expand...
Click to collapse
Remote Desktop.
Yes, i am connect on the network via WiFi
What Port i must open?
Yes firewall turn off.
What port i must open? And on what ip adress? On the PC or on the MOBILE Ip Address?
I try on Windows XP and work, but it was blocked on login to PC and say: Account Restricted..
How i can enter on WINDOWS 7 ?
Right click on Computer-> Properties....On the left side choose Remote Settings and select: Allow connections from computers running any version of remote desktop (less secure)
I do it, but nothing, doesn't work! Why?
windows 7 firewall is off?
Status Windows Firewall : Disabled.
i really run out of ideas...did you use on remote desktop the username and password you use to log in your windows 7 pc?
Try to use as username: computername\username
Nothing Would you try to enter and view setting with TEAMVIEWER?
you have to do port forwarding on your router box
3389 and 3900.. but on the xp, i not must open port..
So ok I've got a router and I have forwarded the port correctly (at least the program says that I did) and VNC server is working fine. But I can't access my comp... What can be the problem? I use external VNC server with my networks ip
(192.168...) as the embedded VNC server aint working (It says that I could not connect to VNC server ). Please guys answer me as Im going to kill somebody
Did you enable remote desktop connection setting and add users for the remote desktop connection on you computer.
also you need a dynamic IP address if you are going to remote desktop connection away from home.
Yes I have dynamic IP but I didnt get the first part.
if you got Win7 or Vista. you need to have the professional version of the operating system.
First you need to go to system property. you can go to Control Panel >> System.
then you will see an option for "remote setting" on the top left hand side of the page.
Select the option Allow connections from computer running any version of remote desktop"
Click on the select user button to add your user account for remote desktop connections.
Enable Remote Desktop connection in your Windows Firewall setting as well as your anti Virus Software firewall setting and finally your router firewall settings.